Waveguide-Enhanced Raman Spectroscopy (WERS): An Emerging Chip-Based Tool for Chemical and Biological Sensing.

Photonic chip-based methods for spectroscopy are of considerable interest due to their applicability to compact, low-power devices for the detection of small molecules. Waveguide-enhanced Raman spectroscopy (WERS) has emerged over the past decade as a particularly interesting approach. WERS utilizes the evanescent field of a waveguide to generate Raman scattering from nearby analyte molecules, and then collects the scattered photons back into the waveguide. The large interacting area and strong electromagnetic field provided by the waveguide allow for significant enhancements in Raman signal over conventional approaches. The waveguide can also be coated with a molecular class-selective sorbent material to concentrate the analyte, thus further increasing the Raman signal. This review provides an overview of the historical development of WERS and highlights recent theoretical and experimental achievements with the technique.

Design and Analysis of Quartz Crystal Microbalance with a New Ring-Shaped Interdigital Electrode.

In this paper, a new type of ring-shaped interdigital electrode is proposed to improve the accuracy and repeatability of quartz crystal microbalance. The influence of different types of single finger, dot finger, dot double-finger electrodes on mass sensitivity distribution as well as the optimal proportion of finger and gap width are obtained through multi-physical coupling simulation. The results show that the design criteria of interdigital electrodes will not change with the increase in the number of fingers. The gap width should obey the decrease order from central to edge and be about twice the width of finger. The width of the outermost finger and the radius of the middle dot electrode should be maintained at about 0.4 and 0.2 times of the total electrode radius. An experiment was carried out to verify that the quartz wafer with a dot double-finger electrode has high quality factors and less modal coupling, which can satisfy the engineering application well. As a conclusion, this study provides a design idea for the electrode to maintain a uniform distribution of quartz crystal microbalance mass sensitivity.

l-cysteine intercalated layered double hydroxide for highly efficient capture of U(VI) from aqueous solutions.

l-cysteine intercalated Mg/Al layered double hydroxide (Cys-LDH) composites were fabricated and applied for treating the U(VI) contaminated wastewater under various conditions. Interaction mechanisms and adsorption properties were investigated by using batch experiments with spectroscopy analysis. The adsorption isotherms and kinetics were fitted perfectly with the Langmuir isotherm and the pseudo-second-order model, respectively. The significant maximum adsorption capacity of Cys-LDH (211.58 mg/g) compared to LDH was attributed to the larger number of functional groups on Cys-LDH. The presence of humic acid (HA) decreased U(VI) elimination on Cys-LDH at high pH but increased U(VI) removal at low pH. Typically, the presence of various anions (such as NO3-, Cl-, ClO4- and SO42-) did not obviously affect U(VI) adsorption on Cys-LDH, while the coexisted CO32- significantly affected U(VI) elimination. The predominate adsorption were determined to be the formation of Cys-U(VI)-Cys complexes with cysteine in the Cys-LDH interlayers. The results demonstrated that the Cys-LDH are promising adsorbents for efficient elimination and extraction of radionuclides in actual environmental contamination management.

Decorating of Ag and CuO on Cu Nanoparticles for Enhanced High Catalytic Activity to the Degradation of Organic Pollutants.

Metal/semiconductor composites are promising catalysts with superior catalytic activity. In this work, a Cu/CuO-Ag composite with structure that consisted of Ag and CuO nanoparticles (NPs) decorated on the surface of Cu were fabricated via a facile in situ method. With characterization by transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray spectroscopy (EDX), and inductively coupled plasma atomic emission spectrometry (ICP-AES), the structure and components of the Cu/CuO-Ag composite were well-defined. The Cu/CuO-Ag composite exhibited superior catalytic activities for the reduction of 4-nitrophenol (4-NP) in the presence of NaBH4 with just a trace amount of Ag NPs (1.28 wt %). The reduction reaction is completed in 75 s with an apparent rate constant kapp of 4.60 × 10-2 s-1. The Cu/CuO-Ag composite also showed excellent durable catalytic stability, as no significant activity loss was detected in the consecutive five reaction runs. With the aid of the Sabatier principle and volcano plot, the opportune chemical adsorption energy of the reagent 4-NP on the Cu/CuO-Ag composite was inferred to be the key to its high reaction rate. The CuO NPs as a semiconductor with narrow band gap also could help the Cu/CuO-Ag composite to capture the electrons/hydride ions and increase opportunities for 4-NP to be reduced. Furthermore, the Cu/CuO-Ag composite exhibited outstanding activity on the oxidative degradation of methylene blue (MB). This work enriched the bimetal/semiconductor catalyst system and supplied new insight into the catalysis mechanism.

Environmental Remediation and Application of Nanoscale Zero-Valent Iron and Its Composites for the Removal of Heavy Metal Ions: A Review.

The presence of heavy metals in the industrial effluents has recently been a challenging issue for human health. Efficient removal of heavy metal ions from environment is one of the most important issues from biological and environmental point of view, and many studies have been devoted to investigate the environmental behavior of nanoscale zerovalent iron (NZVI) for the removal of toxic heavy metal ions, present both in the surface and underground wastewater. The aim of this review is to show the excellent removal capacity and environmental remediation of NZVI-based materials for various heavy metal ions. A new look on NZVI-based materials (e.g., modified or matrix-supported NZVI materials) and possible interaction mechanism (e.g., adsorption, reduction and oxidation) and the latest environmental application. The effects of various environmental conditions (e.g., pH, temperature, coexisting oxy-anions and cations) and potential problems for the removal of heavy metal ions on NZVI-based materials with the DFT theoretical calculations and EXAFS technology are discussed. Research shows that NZVI-based materials have satisfactory removal capacities for heavy metal ions and play an important role in the environmental pollution cleanup. Possible improvement of NZVI-based materials and potential areas for future applications in environment remediation are also proposed.

The Exploration of Flowering Mechanisms in Cherry Plants.

Flowering cherry (Cerasus sp.) are significant spring-blooming trees. However, the short blooming period and the rarity of early and late-flowering varieties limit their use in gardens in northern China. The experiment incorporated annually early-flowering species such as Cerasus discoidea, Cerasus pseudocerasus 'Introtsa', Cerasus dielsiana, Cerasus campanulata 'Youkou', Cerasus yedoensis 'Somei-Yoshino', and Cerasus spachiana f. ascendens, as well as twice-a-year flowering species like Cerasus subhirtella 'Autumnalis' and Cerasus subhirtella 'Accolade'. We observed the timing of natural events and growth measurements for specific plants over a span of two years. This research involved a thorough examination of their ability to withstand cold temperatures, considering their physiological aspects. We examined the levels of nutrients and hormones in the flower buds at various stages of development in plants that bloom yearly and every two years. The findings indicated that C. subhirtella 'Autumnalis' is adaptable, offering the lengthiest autumn blooming phase lasting 54 days. The hierarchy of cold tolerance was as follows: C. pseudocerasus 'Introtsa' > C. discoidea > Cerasus × subhirtella 'Autumnalis' > C. dielsiana > C. 'Youkou'. Furthermore, the soluble protein content in leaves increased before autumn flower buds' sprout of twice-a-year flowering varieties but declined in C. yedoensis 'Somei-Yoshino' within the same time. We determined that changes in nutrient content significantly contribute to the autumn opening of C. subhirtella 'Autumnalis' robust short branch flower buds. During the final phase of flower bud development, the rise in trans-Zeatin-riboside (ZR) and indolacetic acid (IAA) promotes the initiation of the first flowering period in C. subhirtella 'Autumnalis' prior to its mandatory hibernation. The occurrence of secondary flowering involves a multifaceted regulatory process. These findings serve as valuable references for delving deeper into the mechanisms governing cherry blossom formation and secondary flowering.

Robust Transmit Beamforming Algorithm for Low-Altitude Slow-Speed Small Target Detection.

Strong ground clutter echoes make it difficult to detect low-altitude slow-speed small (LSS) targets. To suppress ground clutter effectively in LSS target detection, a robust transmit beamforming algorithm has been proposed in this paper. Sidelobes in the ground side can be cut down, with the excess energy concentrated on the air side, which would be cleaner and simpler. The objective function is a second-order cone programming problem and can be solved by the convex optimization algorithm. With the consideration of taking full advantage of transmit power, the weight vector is further processed under the unimodular constraint. Numerical experiments are carried out to demonstrate the validity and superiority of the proposed method.

Synthesis of layered titanate nanowires at low temperature and their application in efficient removal of U(VI).

Uranium(VI) has become one of the most potential contaminants due to its productive and irreversibility impact on the surrounding environment. Titanate nanowires (TNWs) have attracted significant attention because of its high ion exchange ability and facile synthesis. Herein the TNWs were synthesized, and the morphology and structure of TNWs were investigated by Fourier transformed infrared spectroscopy, scanning electron microscope, transmission electron microscope, X-ray diffraction and X-ray photoelectron spectroscopy in detail. The application of TNWs in U(VI) removal was studied under various environmental conditions using batch technique, and the results indicated that the sorption of U(VI) on TNWs was strongly affected by pH and weakly affected by ionic strength. The presence of PO43- and CO32- could overwhelmingly influence U(VI) interaction with TNWs, which was mainly attributed to the formation of anionic and electro-neutral complexes. From the Langmuir model simulation, the maximum sorption capacities were calculated to be 358, 384, and 410 mg g-1 at the temperatures of 298 K, 313 K and 328 K, respectively. The thermodynamic results revealed that the interaction process was spontaneous and endothermic. The extraordinary ion exchange capacity and facile synthesis under mild conditions made TNWs promising materials for the potential application in the efficient elimination of U(VI) or other lanthanides and actinides from aqueous solutions in the environmental radioactive pollution cleanup.

Synergistic coagulation of GO and secondary adsorption of heavy metal ions on Ca/Al layered double hydroxides.

With the extensive application of graphene oxide (GO), it is noticeable that part of GO is directly/indirectly released into the environment and widespread research indicated that it had adverse influences on human health and ecological balance. In this work, a novel nanobelt-like Ca/Al layered double hydroxides (CA-LDH) was synthesized and applied as efficient coagulant for the removal of GO from aqueous solutions. The results indicated that neutral pH, co-existing cations and higher temperature were beneficial to the coagulation of GO. The sequence of cation effect for promoting of GO coagulation was Ca2+ > Mg2+ > K+ > Na+, whereas the effect of anions on GO coagulation was PO43- > CO32- > SO42- > Cl-. Comparing with anions, the cations showed more dominate effect for GO coagulation than anions. Hydrogen bonds and electrostatic interaction were the main coagulation mechanisms for GO coagulation, which were evidenced by FT-IR and XPS analysis. Specifically, for the first time, the reclaimed product of CA-LDH after GO coagulation (CA-LDH + GO) was applied as adsorbents for the secondary application in the removal of heavy metal ions from aqueous solutions. Interestingly, the CA-LDH + GO still had high adsorption capacities, i.e., the maximum adsorption capacities (qmax) for Cu(II), Pb(II), and Cr(VI) were 122.7 mg/g, 221.2 mg/g and 64.4 mg/g, respectively, higher than other similar materials. This paper highlighted the LDH-based nanomaterials are promising materials for the elimination of environmental pollutants and the migration and transformation of carbon nanomaterials in the natural environment.

[Study on molecular evidence of revision of taxonomic placement of Peucedanum decursivum].

OBJECTIVE: To explain the molecular evidence of revision of taxonomic placement of Peucedanum decursivum based on the nrDNA ITS sequence. METHOD: PCR amplification, DNA sequencing and cladistic analysis. RESULT: The ITS sequences and phylogenetic tree of 5 species of Angelica were and Peucedanum were acquired, in which 5 species were divided into 2 groups, Angelica group and Peucedanum group. P. decursivum was placed in the Angelica group. CONCLUSION: P. decursivum belongs to genus Angelica. The scientific name of P. decursivum should be revised as A. decursivum. A. decursivum and P. praeruptorum should be used as crude drug respectively.

[Study on circumscription of medicinal licorice species based on molecular biology].

OBJECTIVE: Elucidate the medicinal licorice species circumscription in order to develop licorice resources in China and select new cultivars. METHOD: PCR amplification, DNA sequencing and cladistic analysis. RESULT: Acquire the ITS sequences and phylogenetic tree of 8 licorice species. CONCLUSION: According to results Glycyrrhiza eurycarpa and G. glabra var. glandulosa should be combined into G. and G. glabra respectively and G. egladulosa is an independent species.

Combination of Taxol® and dichloroacetate results in synergistically inhibitory effects on Taxol-resistant oral cancer cells under hypoxia.

Cancer cells preferentially catalyze glucose through the glycolytic pathway in the presence of adequate oxygen. This phenomenon is known as the Warburg effect. As is the case with numerous cancer therapeutic agents, resistance remains a significant problem when using Taxol® to treat malignancies. The present study reported that expression of pyruvate dehydrogenase kinase 1 (PDK1) was induced by Taxol treatment at low toxic concentrations in oral cancer cells. In addition, Taxol­resistant cells exhibited upregulated PDK1 protein and mRNA expression. Elevated PDK1 levels contribute to Taxol resistance under hypoxic conditions. Inhibition of PDK1 expression was observed when oral cancer cells were treated with the PDK1 inhibitor dichloroacetate (DCA). The combination of Taxol with DCA showed synergistic inhibitory effects on Taxol­resistant cells under hypoxic conditions; these effects were not observed in Taxol­sensitive oral cancer cells under normoxic conditions. The present study provides a novel mechanism for overcoming Taxol resistance in oral cancer cells, and will contribute towards the development of clinical therapeutics for cancer patients.