Bio-Polyethylene and Polyethylene Biocomposites: An Alternative toward a Sustainable Future.

Polyethylene (PE), a highly prevalent non-biodegradable polymer in the field of plastics, presents a waste management issue. To alleviate this issue, bio-based PE (bio-PE), derived from renewable resources like corn and sugarcane, offers an environmentally friendly alternative. This review discusses various production methods of bio-PE, including fermentation, gasification, and catalytic conversion of biomass. Interestingly, the bio-PE production volumes and market are expanding due to the growing environmental concerns and regulatory pressures. Additionally, the production of PE and bio-PE biocomposites using agricultural waste as filler materials, highlights the growing demand for sustainable alternatives to conventional plastics. According to previous studies, addition of ≈50% defibrillated corn and abaca fibers into bio-PE matrix and a compatibilizer, results in the highest Young's modulus of 4.61 and 5.81 GPa, respectively. These biocomposites have potential applications in automotive, building construction, and furniture industries. Moreover, the advancement made in abiotic and biotic degradation of PE and PE biocomposites is elucidated to address their environmental impacts. Finally, the paper concludes with insights into the opportunities, challenges, and future perspectives in the sustainable production and utilization of PE and bio-PE biocomposites. In summary, production of PE and bio-PE biocomposites can contribute to a cleaner and sustainable future.

In Situ Polymerization Approach to Graphene-Oxide-Reinforced Silicone Composites for Superior Anticorrosive Coating.

Novel graphene-oxide-reinforced silicone composites (GOSC) are prepared by in situ polymerization of silanes and low concentrations (<0.15 wt%) of silylated GO (SGO). After modification, the distances of the SGO nanosheets are successfully increased from 0.72 to 0.87 nm. Compared with GO, the SGO shows better dispersibility in organic solvents as well as remarkably enhanced decomposition temperature (T d improved by 100 °C). After covalently grafting onto silicone resins via in situ polymerization, the obtained GOSC exhibits greatly enhanced thermal stability (T d up to 400 °C and T g improved by 3-5 °C), increased storage modulus, loss modulus, and complex viscosity. The morphology, microstructure, interfacial adhesion of the developed GOSC coatings were carefully investigated. The GOSC coatings on metal exhibit good transparency (up to 90%), hydrophobicity, and excellent anticorrosion capability. This work provides a new strategy for developing high performance graphene-based silicone composite materials.

Cyclotriphosphazene: A Versatile Building Block for Diverse Functional Materials.

Cyclotriphosphazene (CP) is a cyclic inorganic compound with the chemical formula (NPCl2)3. This unique molecule consists of a six-membered ring composed of alternating nitrogen and phosphorus atoms, each bonded to two chlorine atoms. CP exhibits remarkable versatility and significance in the realm of materials chemistry due to its easy functionalization via facile nucleophilic substitution reactions in mild conditions as well as intriguing properties of resultant final CP-based molecules or polymers. CP has been served as an important building block for numerous functional materials. This review provides a general and broad overview of the synthesis of CP-based small molecules through nucleophilic substitution of hexachlorocyclotriphosphazene (HCCP), and their applications, including flame retardants, liquid crystals (LC), chemosensors, electronics, biomedical materials, and lubricants, have been summarized and discussed. It would be expected that this review would offer a timely summary of various CP-based materials and hence give an insight into further exploration of CP-based molecules in the future.

Hydrolytic degradation and biodegradation of polylactic acid electrospun fibers.

Increased use of bioplastics, such as polylactic acid (PLA), helps in reducing greenhouse gas emissions, decreases energy consumption and lowers pollution, but its degradation efficiency has much room for improvement. The degradation rate of electrospun PLA fibers of varying diameters ranging from 0.15 to 1.33 µm is measured during hydrolytic degradation under different pH from 5.5 to 10, and during aerobic biodegradation in seawater supplemented with activated sewage sludge. In hydrolytic conditions, varying PLA fiber diameter had significant influence over percentage weight loss (W%L), where faster degradation was achieved for PLA fibers with smaller diameter. W%L was greatest for PLA-5 > PLA-12 > PLA-16 > PLA-20, with average W%L at 30.7%, 27.8%, 17.2% and 14.3% respectively. While different pH environment does not have a significant influence on PLA degradation, with W%L only slightly higher for basic environments. Similarly biodegradation displayed faster degradation for small diameter fibers with PLA-5 attaining the highest degree of biodegradation at 22.8% after 90 days. Hydrolytic degradation resulted in no significant structural change, while biodegradation resulted in significant hydroxyl end capping products on the PLA surface. Scanning electron microscopy (SEM) imaging of degraded PLA fibers showed a deteriorated morphology of PLA-5 and PLA-12 fibers with increased adhesion structures and irregularly shaped fibers, while a largely unmodified morphology for PLA-16 and PLA-20.

Recent Progress in Polyethylene-enhanced Organic Phase Change Composite Materials for Energy Management.

Phase Change Materials (PCMs) are utilized to regulate temperature and store thermal energy in various industries such as infrastructure, electronics, solar power, and more. However, they face several limitations, such as leakage, poor thermal properties, incompatibility, as well as high flammability. Polyethylene (PE) is one of many polymers explored to enhance the desirable properties of PCMs, due to their versatile properties such as high strength, durability, chemical resistance, and low cost. The combination of PCMs and PE can be used to create composite materials, through micro/nano- encapsulation, melt-blending, formation of composites and with proper additives. They create enhanced thermal energy storage properties and in the meantime, benefited from the mechanical properties of the PE. This review provides a concise summary of the recent developments regarding PE-enhanced PCMs and provides insights into possible topics for further investigation. We summarised enhancement methods based on commonly adopted types of PEs, such as encapsulation, melt-blending, hot pressing, extrusion, and 3D printing. We then elaborate on how these PE-PCM composites are effectively utilised for heat management applications and the potential future directions in energy-saving buildings, electronic devices, and energy storage systems.

Two-Dimensional Layered Materials Meet Perovskite Oxides: A Combination for High-Performance Electronic Devices.

As the Si-based transistors scale down to atomic dimensions, the basic principle of current electronics, which heavily relies on the tunable charge degree of freedom, faces increasing challenges to meet the future requirements of speed, switching energy, heat dissipation, and packing density as well as functionalities. Heterogeneous integration, where dissimilar layers of materials and functionalities are unrestrictedly stacked at an atomic scale, is appealing for next-generation electronics, such as multifunctional, neuromorphic, spintronic, and ultralow-power devices, because it unlocks technologically useful interfaces of distinct functionalities. Recently, the combination of functional perovskite oxides and two-dimensional layered materials (2DLMs) led to unexpected functionalities and enhanced device performance. In this paper, we review the recent progress of the heterogeneous integration of perovskite oxides and 2DLMs from the perspectives of fabrication and interfacial properties, electronic applications, and challenges as well as outlooks. In particular, we focus on three types of attractive applications, namely field-effect transistors, memory, and neuromorphic electronics. The van der Waals integration approach is extendible to other oxides and 2DLMs, leading to almost unlimited combinations of oxides and 2DLMs and contributing to future high-performance electronic and spintronic devices.

Bio-Polypropylene and Polypropylene-based Biocomposites: Solutions for a Sustainable Future.

Polypropylene (PP) is among the most widely used commodity plastics in our everyday life due to its low cost, lightweight, easy processability, and exceptional chemical, thermo-mechanical characteristics. The growing awareness on energy and environmental crisis has driven global efforts for creating a circular economy via developing sustainable and eco-friendly alternatives to traditional plastics produced from fossil fuels for a variety of end-use applications. This review paper presents a brief outline of the emerging bio-based PP derived from renewable natural resources, covering its production routes, market analysis and potential utilizations. This contribution also provides a comprehensive review of the PP-based biocomposites produced with diverse green fillers generated from agro-industrial wastes, with particular emphasis on the structural modification, processing techniques, mechanical properties, and practical applications. Furthermore, given that the majority of PP products are currently destined for landfills, research progress on enhancing the degradation of PP and its biocomposites is also presented in light of the environmental concerns. Finally, a brief conclusion with discussions on challenges and future perspectives are provided.

Oxygen Plasma Induced Nanochannels for Creating Bimetallic Hollow Nanocrystals.

Platinum-based metal catalysts are considered excellent converters in various catalytic reactions, particularly in fuel cell applications. The atomic structure at the nanocrystal surface and the metal interface both influence the catalytic performance, controlling the efficiency of the electrochemical reactions. Here we report the synthesis of Ag/Pt and Ag/Pd core/shell nanocrystals and insight into the formation mechanism of these bimetallic core/shell nanocrystals when undergoing oxygen plasma treatment. We carefully designed the oxidation treatment that determines the structural and compositional evolution. The accelerated oxidation-triggered diffusion of Ag toward the outer metal shell leads to the Kirkendall effect. After prolonged oxygen plasma treatment, most core/shell nanocrystals evolve into hollow spheres. At the same time, a minor fraction of the metal remains unchanged with a well-protected Ag core and a monocrystalline Pt or Pd shell. We hypothesize that the O2 plasma disturbs the Pt or Pd shell surface and introduces active O species that react with the diffused Ag from the inside out. Based on EDX elemental mapping, combined with several electron microscopic techniques, we deduced the formation mechanism of the hollow structures to be as follows: (I) the oxidation of Ag within the Pt or Pd lattice causes a disrupted crystal lattice of Pt or Pd; (II) nanochannels arise at the defect locations on the Pt or Pd shell; (III) the remaining Ag atoms pass through these nanochannels and leave a hollow crystal behind. Our findings deepen the understanding of interface dynamics of bimetallic nanostructured catalysts under an oxidative environment and unveil an alternative approach for catalyst pretreatment.

Recent Advances in Host-Guest Supramolecular Hydrogels for Biomedical Applications.

The recognition-directed host-guest interaction is recognized as a valuable tool for creating supramolecular polymers. Functional hydrogels constructed through the dynamic and reversible host-guest complexation are endowed with a great many appealing features, such as superior self-healing, injectability, flexibility, stimuli-responsiveness and biocompatibility, which are crucial for biological and medicinal applications. With numerous topological structures and host-guest combinations established previously, recent breakthroughs in this area mostly focus on further improvement and fine-tuning of various properties for practical utilizations. The current contribution provides a comprehensive overview of the latest developments in host-guest supramolecular hydrogels, with a particular emphasis on the innovative molecular-level design strategies and hydrogel formation methodologies targeting at a wide range of active biomedical domains, including drug delivery, 3D printing, wound healing, tissue engineering, artificial actuators, biosensors, etc. Furthermore, a brief conclusion and discussion on the steps forward to bring these smart hydrogels to clinical practice is also presented.

Polylactic acid face masks: Are these the sustainable solutions in times of COVID-19 pandemic?

The global massive consumption of disposable face masks driven by the ongoing COVID-19 pandemic has emerged as a blooming disaster to both the land and marine environment that might last for generations. Growing public concerns have been raised over the management and control of this new form of plastic pollution, and one of the proposed sustainable solution is to use renewable and/or biodegradable resources to develop mask materials in order to minimize their environmental impacts. As a representative biodegradable polymer, polylactic acid (PLA) has been proposed as a promising candidate to produce non-woven face masks instead of those fossil-based polymers. To further explore the feasibility of this alternative mask material, the present work aims to study both the hydrolytic and bio-degradation behaviors of pure PLA-derived 3-ply disposable face masks at ambient temperature. Hydrolytic degradability was investigated at different pH conditions of 2, 7 and 13 with the whole piece of face mask soaked for regular timed intervals up to 8 weeks. Weight loss study showed neutral and acidic conditions had minimal effect on PLA masks, but rapid degradation occurred under basic conditions in the first week with a sharp 25% decrease in weight that slowly tapered off, coupled with solution pH dropping from 13 to 9.6. This trend was supported by mechanical property, bacterial filtration efficiency (BFE) and particulate filtration efficiency (PFE) studies. Masks soaked in basic conditions had their modulus and tensile strength dropped by more than 50% after 8 weeks where the middle layer reached 68% and 90% respectively just after 48 h, and BFE and PFE decreased by 14% and 43% respectively after 4 weeks, which was much more significant than those in neutral and acidic conditions. Base degradation was also supported by nuclear magnetic resonance (NMR) and fourier transform infrared (FTIR), which disclosed that only the middle layer undergo major degradation with random chain scission and cleavage of enol or enolate chain ends, while outer and inner layers were much less affected. Scanning electron microscopy (SEM) attributed this observation to thinner PLA fibers for the middle layer of 3-7 µm diameter, which on average is 3 times smaller. This degradation was further supported by gel permeation chromatography (GPC) which saw an increase in lower molecular weight fragment Mw ~ 800 Da with soaking duration. The biodegradation behavior was studied under OECD 301F specification in sewage sludge environment. Similarly, degradation to the middle meltblown layer was more extensive, where the average weight loss and carbon loss was 25.8% and 25.7% respectively, double that of outer/inner spunbond layer. The results showed that the face masks did not completely disintegrate after 8 weeks, but small solubilized fragments of PLA formed in the biodegradation process can be completely mineralized into carbon dioxide without generation of secondary microplastic pollution in the environment. PLA masks are therefore a slightly greener option to consider in times of a pandemic that the world was caught unprepared; however future research on masks could be geared towards a higher degradability material that fully breaks down into non-harmful components while maintaining durability, filtration and protection properties for users.

Bottom-Up Engineering Strategies for High-Performance Thermoelectric Materials.

The recent advancements in thermoelectric materials are largely credited to two factors, namely established physical theories and advanced materials engineering methods. The developments in the physical theories have come a long way from the "phonon glass electron crystal" paradigm to the more recent band convergence and nanostructuring, which consequently results in drastic improvement in the thermoelectric figure of merit value. On the other hand, the progresses in materials fabrication methods and processing technologies have enabled the discovery of new physical mechanisms, hence further facilitating the emergence of high-performance thermoelectric materials. In recent years, many comprehensive review articles are focused on various aspects of thermoelectrics ranging from thermoelectric materials, physical mechanisms and materials process techniques in particular with emphasis on solid state reactions. While bottom-up approaches to obtain thermoelectric materials have widely been employed in thermoelectrics, comprehensive reviews on summarizing such methods are still rare. In this review, we will outline a variety of bottom-up strategies for preparing high-performance thermoelectric materials. In addition, state-of-art, challenges and future opportunities in this domain will be commented.

Face Masks in the New COVID-19 Normal: Materials, Testing, and Perspectives.

The increasing prevalence of infectious diseases in recent decades has posed a serious threat to public health. Routes of transmission differ, but the respiratory droplet or airborne route has the greatest potential to disrupt social intercourse, while being amenable to prevention by the humble face mask. Different types of masks give different levels of protection to the user. The ongoing COVID-19 pandemic has even resulted in a global shortage of face masks and the raw materials that go into them, driving individuals to self-produce masks from household items. At the same time, research has been accelerated towards improving the quality and performance of face masks, e.g., by introducing properties such as antimicrobial activity and superhydrophobicity. This review will cover mask-wearing from the public health perspective, the technical details of commercial and home-made masks, and recent advances in mask engineering, disinfection, and materials and discuss the sustainability of mask-wearing and mask production into the future.

Viologen-Based Electrochromic Materials: From Small Molecules, Polymers and Composites to Their Applications.

Organic materials have gained considerable attention for electrochromic (EC) applications owing to improved EC performance and good processability. As a class of well-recognized organic EC materials, viologens have received persistent attention due to the structural versatility and property tunability, and are major active EC components for most of the marketed EC devices. Over the past two decades, extensive efforts have been made to design and synthesize different types of viologen-based materials with enhanced EC properties. This review summarizes chemical structures, preparation and EC properties of various latest viologen-based electrochromes, including small viologen derivatives, main-chain viologen-based polymers, conjugated polymers with viologen side-chains and viologen-based organic/inorganic composites. The performance enhancement mechanisms are concisely discussed. The current marketed viologens-based electrochromic devices (ECDs) are briefly introduced and an outlook on the challenges and future exploration directions for viologen-based materials and their ECDs are also proposed.

Flexible and Wearable All-Solid-State Al-Air Battery Based on Iron Carbide Encapsulated in Electrospun Porous Carbon Nanofibers.

In this work, electrospinning N-doped carbon nanofibers containing iron carbide (Fe3C@N-CFs) are synthesized and employed as the cathode in the flexible Al-air battery. Benefiting from the excellent catalytic activity of the iron carbide which is uniformly encapsulated in the N-doped carbon matrix, as well as the large specific surface area of the cross-linked network nanostructure, the as-prepared Fe3C@N-CFs show outstanding catalytic activity and stability toward oxygen reduction reaction. The as-fabricated all-solid-state Al-air batteries with Fe3C@N-CF catalyst show a stable discharge voltage (1.61 V) for 8 h, giving a capacity of 1287.3 mA h g-1.

Solid-phase synthesis of solanesol.

An efficient and convergent solid-phase strategy for the total synthesis of All- E solanesol is described. This method features avoidance of iterative and difficult purifications comparing with solution-phase synthesis and is suitable for the preparation of other oligoprenols.

Lignin-derived fused electrospun carbon fibrous mats as high performance anode materials for lithium ion batteries.

A novel biomass-based nitrogen-doped free-standing fused carbon fibrous mat was fabricated from lignin-polyethylene oxide (PEO) (90:10) blend via electrospinning followed by carbonization and thermal annealing in the presence of urea. The morphology and structure of the carbon fibers were characterized by field-emission scanning electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, and elemental analysis, and their electrochemical properties were investigated for the first time as anode in lithium ion batteries (LIBs). The fused carbon fibers without nitrogen doping exhibited high specific capacity up to 445 mA h g(-1) at a current density of 30 mA g(-1) (comparable to polyacrylonitrile (PAN) derived carbon nanofibers) and good cyclic stability at different current rates. After thermal annealing in the presence of urea, the charge capacity was further improved to as high as 576 mA h g(-1) and still maintained a good capacity of about 200 mAh g(-1) even at a high current rate of 2000 mA g(-1). This research demonstrates the great promise of lignin-derived nanocarbon materials for applications in energy storage systems.

Novel polymer-supported chiral catalysts for the asymmetric addition of diethylzinc to aldehydes.

Newly synthesized polymer-supported chiral amino alcohol catalysts 5a and 5b have been proved to be effective for the enantioselective addition of diethylzinc to aldehydes, affording the corresponding sec-alcohols in moderate enantiomeric excesses with good to excellent yields. The recycled catalyst could be reused in the same reaction without significant deterioration in performance.