Chemical profile and difference analysis of four parts of Strobilanthes sarcorrhiza by ultrafast flow liquid chromatography coupled with quadrupole-time-of-flight mass spectrometry and multivariate statistical analysis.

Strobilanthes sarcorrhiza (CTS) is a medicinal plant with various pharmacological effects such as tonifying kidney and anti-inflammatory. However, the chemical composition and difference of its four parts (leaves, stems, rhizomes, and root tubers) have been rarely reported. In this study, ultrafast flow liquid chromatography coupled with quadrupole-time-of-flight MS was applied to analyze the chemical profile of CTS and identify 55 compounds, including terpenoids, phenylethanol glycosides, fatty acid derivatives, chain glycosides, flavonoid glycosides, and others. Among these compounds, 34 compounds were first identified in CTS. They were mainly terpenoids, phenylethanol glycosides, fatty acid derivatives, and so forth. Multivariate statistical analysis, such as principal component analysis and orthogonal partial least squares-discriminant analysis were also used to evaluate the difference in chemical compounds from the four parts of CTS. The results showed that phenylethanol glycosides were the main compounds of the underground parts, while terpenoids were the main compounds of the aboveground parts. This study revealed the chemical diversity and similarity of CTS and suggested that the rhizomes could be used as an alternative medicinal part to improve the resource utilization of CTS.

[Correlation between intestinal toxicity and composition changes of toxic parts from Euphorbia ebracteolata before and after Terminalia chebula soup processing].

This study aims to explore the correlation between intestinal toxicity and composition changes of Euphorbia ebracteolata before and after Terminalia chebula soup(TCS) processing. Intragastric administration was performed on the whole animal model. By using fecal water content, inflammatory causes, and pathological damage of different parts of the intestinal tract of mice as indexes, the differences in intestinal toxicity of dichloromethane extraction of raw E. ebracteolata(REDE), dichloromethane extraction of TCS, and dichloromethane extraction of E. ebracteolata after simulated TCS processing(STREDE) were compared, so as to investigate the effect of TCS processing on the intestinal toxicity of E. ebracteolata. At the same time, the component databases of E. ebracteolata and T. chebula were constructed, and the composition changes of diterpenoids, tannins, and phenolic acids in the three extracted parts were analyzed by HPLC-TOF-MS. HPLC was used to compare the content of four diterpenoids including ent-11α-hydroxyabicta-8(14), 13(15)-dien-16, 12-olide(HAO), jolkinolide B(JNB), fischeria A(FA), and jolkinolide E(JNE) in the E. ebracteolata before and after processing and the residue of container wall after processing, so as to investigate the effect of TCS processing on the content and structure of the diterpenoids. The results showed that the REDE group could significantly increase the fecal water content and the release levels of TNF-α and IL-1ß from each intestinal segment, and intestinal tissue damage was accompanied by significant infiltration of inflammatory cells. However, compared with the REDE group, the intestinal tissue damage in the STREDE group was alleviated, and the infiltration of inflammatory cells decreased. The intestinal toxicity significantly decreased. Mass spectrometry analysis showed that there was no significant difference in the content of diterpenoids of REDE before and after simulated TCS processing, but a large number of tannins and phenolic acids were added. The results of HPLC showed that the content of four diterpenoids of E. ebracteo-lata decreased to varying degrees after TCS processing, ranging from-0.35% to-19.74%, and the decreased part mainly remained in the container wall, indicating that the structure of toxic diterpenoids of E. ebracteolata was not changed after TCS processing. The antagonistic effect of tannic and phenolic acids in the TCS may be the main reason for the reduced intestinal toxicity of E. ebracteolata after TCS processing. The TCS processing for E. ebracteolata is scientific.

[Simulated processing with vinegar changes chemical structures of main terpenoids in Euphorbiae Ebracteolatae Radix].

This study aims to explore the chemical structure transformation mechanisms of the main terpenoids in the effective fraction of Euphorbiae Ebracteolatae Radix(EER) during the processing with vinegar. The terpenoids including ent-11α-hydroxyabicta-8(14),13(15)-dien-16,12-olide(HAO), jolkinolide B(JNB), fischeria A(FA), and eupractenoid A(EA) were heated at 160 ℃ with 6% acetic acid for 40 min, and then LC-MS/MS was employed to analyze the structural transformation rules of the terpenoids. Further, we analyzed the changes in the relative content of the four compounds and their transformation products in raw and vinegar processed EER to verify the transformation rules during the simulated processing with vinegar. In addition, JNB and FA were processed with single heating, heating with water or heating with acetic acid. We then employed HPLC to compare the content of these two terpenoids and their transformation products before and after processing, so as to investigate the effect of different processing methods on chemical structure transformation. The results showed that the lactone ring of the abietane-type diterpenoids HAO and JNB and the norditerpene lactone FA were opened by heating with acetic acid. When there were hydroxyl groups in the structures, terpenoids were esterized to esters and oxidized to form carbonyl groups. When there was epoxy ring in the structures, ring opening reaction was easy to occur. During the heating with acetic acid, the heterodimeric diterpenoid EA underwent the cleavage of ether bond to produce the rosane-type diterpenoid euphebracteolatin A(EHTA) and another abietane-type diterpenoid. The changes in the relative content of terpenoids and their transformation products in raw and vinegar-processed EER were basically consistent with those of simulated processing of components with vinegar. The HPLC results revealed that the effect of different simulated processing methods on structural transformation varied. Heating with acid can change JNB and FA into new components. Heating with water can also promote the structural transformation, with the efficiency obviously lower than that of heating with acid. Direct heating had no influence on the structure of JNB, while it significantly reduced the relative content of FA. The components treated with direct heating did not produce the products like those of the heating with acid. These results indicated that vinegar plays a key role in the structural transformation of diterpenoids during the processing of EER with vinegar. The structural transformation of diterpenoids in EER during the processing with vinegar may be the material basis for vinegar processed EER to reduce toxicity and preserve effect.

Budlein A methylacrylate demonstrates potent activity against triple-negative breast cancer by targeting IκBα kinase and exportin-1.

Triple-negative breast cancer (TNBC) remains the most challenging breast cancer subtype to treat because there are no targeted therapies. Currently, chemotherapy is the only clinical option for TNBC despite development of resistance. New therapeutic agents with unique mechanisms of action are urgently needed; therefore, this study investigated the potential anti-TNBC effects of budlein A methylacrylate (BAM), a natural sesquiterpene lactone isolated from plants of the Helianthus genus. We discovered that BAM selectively suppressed and induced apoptosis TNBC cell growth versus other breast cancer or normal mammary epithelial cells. Mechanistically, BAM co-inhibited inhibitor of nuclear factor κBα (IκBα) kinase subunit ß (IKKß) and exportin-1 (XPO-1; chromosome region maintenance 1, CRM1), which are two dysregulated onco-related proteins in TNBC cells, by covalently modifying key functional cysteine residues (Cys179 of IKKß, Cys528 of XPO-1). Dual inhibition led to the stabilization and nuclear retention of IκBα, impairment of NF-κB transcriptional activity, and consequent induction of TNBC cell apoptosis. In conclusion, this study provides evidence that co-inhibition of IKKß and XPO-1 by BAM was effective against TNBC, demonstrating it as a representative new generation inhibitor with potential for TNBC treatment.

[Proteomics and peptidomics analysis of Sepiae Endoconcha].

Shotgun based proteomics and peptidomics analysis were used to investigate the proteins and peptides in marine traditional Chinese medicine(TCM) Sepiae Endoconcha(cuttlebone). Peptides were extracted from cuttlebone by acidified methanol, and then strong cation exchange(SCX) resin was used to enrich those peptides. Also, proteins from cuttlebone were extracted and digested by trypsin. nano-LC Q Exactive Orbitrap mass spectrometry was used to analyze proteins and peptides from cuttlebone. As a result, a total of 16 proteins and 168 peptides were identified by protein database search, and 328 peptides were identified by De novo sequencing. The identified proteins were hemocyanin, enolase, myosin, actin, calmodulin, etc., and the identified peptides were derived from actin, histone, and tubulin. All these proteins and peptides were important components in cuttlebone, which would provide important theoretical and research basis for marine TCM cuttlebone investigations.

[Effect of triptolide on Th17/Treg cells in spleen].

Triptolide( TP) is isolated from the traditional Chinese medicine Tripterygium wilfordii,which exhibits notable immuneregulative effect. Th17 cells involve in inflammatory response and Treg cells contribute to immune tolerance. They both play an important role in immune response. Previous studies have investigated that TP induced hepatic Th17/Treg imbalance. However,the effect of TP on spleen Th17/Treg cells remains unclear. Therefore,the aim of present study was to investigate the effect of TP on Th17/Treg cells in spleen. In this study,the effect of TP on the proliferation of splenic lymphocyte was detected by cytotoxicity test in vitro. After different concentrations of TP( 2. 5,5,20,40 nmol·L~(-1)) were given to splenic lymphocyte,cytokines secreted from the supernatant of splenic lymphocyte were detected by cytometric bead array,and the expression of suppressor of cytokine signaling( SOCS) mRNA was detected by qRT-PCR. Female C57 BL/6 mice were continuously observed for 24 h after treatment of 500 µg·kg-1 TP. The effects of TP on the splenic tissue structure and the percentage of Th17/Treg cells were examined. The results showed that the IC50 of TP was19. 6 nmol·L~(-1) in spleen lymphocytes. TP inhibited the secretion of IL-2 and IL-10 and induced the expression of SOCS-1/3 mRNA in spleen lymphocytes at the dosage of 2. 5 and 5 nmol·L~(-1) after 24 h in vitro. Administration of TP at dosage of 500 µg·kg-1 had no significant spleen toxicity in vivo. TP treatment increased the percentage of Th17 cells after 12 h and inhibited the proportion of Treg cells after 12 and 24 h. In conclusion,TP reduced the secretion of IL-2 and IL-10 through SOCS-1/3 signaling pathway,thereby induced the percentage of Th17 cells and inhibited the percentage of Treg cells.

[Progress of effect and mechanisms of Tripterygium wilfordii on immune system].

Traditional Chinese medicine Tripterygium wilfordii Hook.f( TWHF) is a natural botanical drug in China. It has complex chemical compositions and has been used for a long history. TWHF was used as an insecticide to protect crops at early stage,and it was later found to have significant effects in the treatment of rheumatoid arthritis,attaining great concerns. With further researches,it was found that TWHF can treat various diseases in the medical field due to a variety of pharmacological activities such as anti-cancer,neuroprotection,anti-inflammatory and immune-suppressing,particularly. Multiple extracts of TWHF have unique immunosuppressive function,playing an immune role through multi-target and multi-channel,with significant effect in the treatment of autoimmune diseases. As an immune-suppressing drug,TWHF is worthy of in-depth research due to its broad application prospects. While achieving good clinical efficacy,reports about its toxic effects to multiple systems of the body are also increasing,greatly hindering its clinical application. In order to fully understand the immune-suppressing function of TWHF and reduce or avoid the occurrence of toxic and side effects,we summarized recent progress of TWHF on the immune organs,cells and factors in recent years,as well as the pharmacology and toxic effects,hoping to provide a scientific and reasonable reference for its wider use in clinical treatment.

Activation of natural killer T cells contributes to triptolide-induced liver injury in mice.

Triptolide (TP) is the main active ingredient of Tripterygium wilfordii Hook.f, which has attracted great interest due to its promising efficacy for autoimmune diseases and tumors. However, severe adverse reactions, especially hepatotoxicity, have restricted its approval in the market. In the present study we explored the role of hepatic natural killer T (NKT) cells in the pathogenesis of TP-induced liver injury in mice. TP (600 µg/kg/day, i.g.) was administered to female mice for 1, 3, or 5 days. We found that administration of TP dose-dependently induced hepatotoxicity, evidenced by the body weight reduction, elevated serum ALT and AST levels, as well as significant histopathological changes in the livers. However, the mice were resistant to the development of TP-induced liver injury when their NKT cells were depleted by injection of anti-NK1.1 mAb (200 µg, i.p.) on days -2 and -1 before TP administration. We further revealed that TP administration activated NKT cells, dominantly releasing Th1 cytokine IFN-γ, recruiting neutrophils and macrophages, and leading to liver damage. After anti-NK1.1 injection, however, the mice mainly secreted Th2 cytokine IL-4 in the livers and exhibited a significantly lower percentage of hepatic infiltrating neutrophils and macrophages upon TP challenge. The activation of NKT cells was associated with the upregulation of Toll-like receptor (TLR) signaling pathway. Collectively, these results demonstrate a novel role of NKT cells contributing to the mechanisms of TP-induced liver injury. More importantly, the regulation of NKT cells may promote effective measures that control drug-induced liver injury.

Determination of a natural DNMT1 inhibitor, peperomin E, in rat plasma by UFLC-MS/MS and method application in a pharmacokinetic study.

Peperomin E (PepE), a naturally occurring secolignan isolated from Peperomia dindygulensis, has drawn much attention recently owing to its anticancer and DNA methyltransferase 1 (DNMT1) inhibitory activity. Here, a simple and sensitive ultra-fast liquid chromatography-tandem mass spectrometry method was developed and validated for the determination of PepE in rat plasma for the first time. Samples were prepared by simple protein precipitation. Separation was performed on an XBridge™ C18 column using a mobile phase of acetonitrile and 0.1% (v/v) aqueous formic acid. PepE and the internal standard arctigenin were detected in a positive-ion mode using multiple reaction monitoring of the transitions at m/z 413.2 → 261.0 and 373.2 → 137.2, respectively. The calibration curve for PepE was linear over the range of concentrations of 1.46-6000 ng/mL, with a lower limit of quantitation of 1.46 ng/mL. Both intra- and interday precisions were within 11.05%, and the accuracy ranged from -11.5 to 5.51%. The extraction recovery and matrix effect were within acceptable limits. Stability tests showed that PepE remained stable throughout the analytical procedure. The validated method was then used to analyze the pharmacokinetics of PepE administered to rats orally (12.5 and 25 mg/kg) or intravenously (6.25 and 12.5 mg/kg).

Rapid Identification of Dipeptidyl Peptidase-IV (DPP-IV) Inhibitory Peptides from Ruditapes philippinarum Hydrolysate.

Dipeptidyl peptidase-IV (DPP-IV) inhibitory peptides were rapidly identified from Ruditapes philippinarum hydrolysate. The hydrolysate was fractionated by ethanol precipitation and preparative reverse phase high-performance liquid chromatography (RP-HPLC). The fraction which showed the highest DPP-IV inhibitory activity was then analyzed by a high-throughput nano-liquid chromatography electrospray ionization tandem mass spectrometry (nano-LC ESI-MS/MS) method, and the sequences of peptides were identified based on the MS/MS spectra against the Mollusca protein data from the UniProt database. In total, 50 peptides were identified. Furthermore, molecular docking was used to identify potential DPP-IV inhibitors from the identified peptides. Docking results suggested that four peptides: FAGDDAPR, LAPSTM, FAGDDAPRA, and FLMESH, could bind pockets of DPP-IV through hydrogen bonds, π-π bonds, and charge interactions. The four peptides were chemically synthesized and tested for DPP-IV inhibitory activity. The results showed that they possessed DPP-IV inhibitory activity with IC50 values of 168.72 µM, 140.82 µM, 393.30 µM, and >500 µM, respectively. These results indicate that R. philippinarum-derived peptides may have potential as functional food ingredients for the prevention of diabetes.

[Optimize excipients for Yinsang hypoglycemic granules by using multiple indexes].

Optimal excipients were screened by studying the effect of different excipients on the hygroscopicity of the extract, testing polysaccharide in the preparation and blood glucose value. Single factor tests were performed with hygroscopicity, formability and fluidity as the indexes, and the moisture content, granule yield and angle of repose were combined with physical characters of the materials to screen the proportioning and dosage of excipients. Then the critical relative humidity of preferred Yinsang granules were measured. The optimum excipients for Yinsang hypoglycemic granules were mulberry leaf paste-microcrystalline cellulose-mactra veneriformis crude polysaccharides (10∶9∶1.67). The obtained granules had good formability and fluidity, which were not easy to absorb moisture for liquefaction, with a critical relative humidity of 73%. This formation process was reasonable and feasible, suitable for industrial production, which can significantly improve hygroscopicity and liquefaction properties of extracts, improve stability of Yinsang granules, and provide reference for screening of excipients for other preparations.

Peperomin E reactivates silenced tumor suppressor genes in lung cancer cells by inhibition of DNA methyltransferase.

Advanced lung cancer has poor prognosis owing to its low sensitivity to current chemotherapy agents. Therefore, discovery of new therapeutic agents is urgently needed. In this study, we investigated the antitumor effects of peperomin E, a secolignan isolated from Peperomia dindygulensis, a frequently used Chinese folk medicine for lung cancer treatment. The results indicate that peperomin E has antiproliferative effects, promoting apoptosis and cell cycle arrest in non-small-cell lung cancer (NSCLC) cell lines in a dose-dependent manner, while showing lower toxicity against normal human lung epidermal cells. Peperomin E inhibited tumor growth in A549 xenograft BALB/c nude mice without significant secondary adverse effects, indicating that it may be safely used to treat NSCLC. Furthermore, the mechanisms underlying the anticancer effects of peperomin E have been investigated. Using an in silico target fishing method, we observed that peperomin E directly interacts with the active domain of DNA methyltransferase 1 (DNMT1), potentially affecting its genome methylation activity. Subsequent experiments verified that peperomin E decreased DNMT1 activity and expression, thereby decreasing global methylation and reactivating the epigenetically silenced tumor suppressor genes including RASSF1A, APC, RUNX3, and p16INK4, which in turn activates their mediated pro-apoptotic and cell cycle regulatory signaling pathways in lung cancer cells. The observations herein report for the first time that peperomin E is a potential chemotherapeutic agent for NSCLC. The anticancer effects of peperomin E may be partly attributable to its ability to demethylate and reactivate methylation-silenced tumor suppressor genes through direct inhibition of the activity and expression of DNMT1.

[Three-dimensional finite element analysis of one-piece computer aided design and computer aided manufacture involved zirconia post and core].

OBJECTIVE: To analyze the biomechanics trait of one-piece computer aided design and computer aided manufacture (CAD/CAM) zirconia post and core by the Three-dimensional finite element. METHODS: The Three-dimensional finite element models of three upper central incisors restored with one-piece CAD/CAM zirconia post and core (group 1), refabricated zirconia post and hot-pressed porcelain core (group 2), and cast gold alloy post and core (group 3) were built by geometry method respectively. 100 N vertical loading through the central incisor models long axis and 100 N loading along directing at an angle of 45° with the models long axis were used to imitate the central incisor stress state in biting and mandible physiological protraction movement. RESULTS: Under vertical loading, the restored teeth without dentin ferrule, the maximum Von-Mises stress value of the tooth root in group 1 was the least(11.02 N), which was the largest (13.17 N)in group 2. The stress became weaker from the upper to the lower of the tooth root. The maximum Von-Mises stress value of the tooth root, post and core became smaller while the restored teeth with the 2.0 mm high dentin ferrule. Under directing at an angle of 45° loading, without the design of dentin ferrule in the restored teeth, the maximum Von-Mises stress value of the post and core in group 1 was the greatest(20.45 N), while that stress of post and core in group 3 was the smallest(13.61 N). With 2.0 mm high dentin ferrule design in the restored teeth, the tooth root stress became weaker. The maximum Von-Mises stress value of the tooth root was the greatest (14.10 N) in group 3, but which was the lowest (13.38 N) in group 1. CONCLUSION: The results of the Three-dimensional finite element analysis infers that one-piece zirconia post and core restoration is more beneficial to disperse the bite force than the prefabricated zirconia post and the cast gold alloy post and core. The one-piece of zirconia post and core is good to protect the teeth and keep the restoration intact.

[Comparative research for micro-push-out bond strengths of glass fiber posts treated by poly-dopamine or silane coupling agent].

OBJECTIVE: To evaluate the micro-push-out bond strengths of prefabricated glass fiber posts with poly-dopamine functionalized to root dentin using resin cements, contrasted with silane treatment. METHODS: In the study, 30 glass fiber posts were randomly divided into 3 groups (10 posts in each group) for different surface treatments. Group 1, treated with poly-dopa; Group 2, treated with silane coupling agent for 60s; Group 3, no surface treatment (Control group). The 30 extracted human, single-rooted teeth were endodontically treated and a 9 mm post space was prepared in each tooth with post drills provided by the manufacturer. Following post cementation, the specimens were stored in distilled water at 37 °C for 7 days. The micro-push-out bond strengths were tested using a universal testing machine (0.5 mm/min), and the failure modes were examined with a stereomicroscope. The data of the three groups were statistically analyzed using the one-way ANOVA test(α= 0.05). RESULTS: The bond strengths were (7.909 ± 1.987) MPa for Group 1, (5.906 ± 0.620) MPa for Group 2, and 4.678 ± 0.910 MPa for Group 3. The bond strength of poly-dopamine group was significantly higher than that of the silane group (P<0.05). CONCLUSION: Contrasted with silane treatment, surface poly-dopamine functionalization was confirmed to be a more reliable method for improving the bond strength of resin luting agents to fiber posts.

Novel method of fabricating individual trays for maxillectomy patients by computer-aided design and rapid prototyping.

PURPOSE: Making impressions for maxillectomy patients is an essential but difficult task. This study developed a novel method to fabricate individual trays by computer-aided design (CAD) and rapid prototyping (RP) to simplify the process and enhance patient safety. MATERIALS AND METHODS: Five unilateral maxillectomy patients were recruited for this study. For each patient, a computed tomography (CT) scan was taken. Based on the 3D surface reconstruction of the target area, an individual tray was manufactured by CAD/RP. With a conventional custom tray as control, two final impressions were made using the different types of tray for each patient. The trays were sectioned, and in each section the thickness of the material was measured at six evenly distributed points. Descriptive statistics and paired t-test were used to examine the difference of the impression thickness. SAS 9.3 was applied in the statistical analysis. Afterwards, all casts were then optically 3D scanned and compared digitally to evaluate the feasibility of this method. RESULTS: Impressions of all five maxillectomy patients were successfully made with individual trays fabricated by CAD/RP and traditional trays. The descriptive statistics of impression thickness measurement showed slightly more uneven results in the traditional trays, but no statistical significance was shown. A 3D digital comparison showed acceptable discrepancies within 1 mm in the majority of cast areas. The largest difference of 3 mm was observed in the buccal wall of the defective areas. Moderate deviations of 1 to 2 mm were detected in the buccal and labial vestibular groove areas. CONCLUSIONS: This study confirmed the feasibility of a novel method of fabricating individual trays by CAD/RP. Impressions made by individual trays manufactured using CAD/RP had a uniform thickness, with an acceptable level of accuracy compared to those made through conventional processes.

[Effect of Naoshuantong capsule on change of SSQOL index in patients with ischemic stroke in six mouths follow-up].

To evaluate the effect of Naoshuantong capsule on the life quality of patients with ischemic stroke in six months of follow-up studies, and observe the adverse events. The results would provide reference for the secondary prevention on the recovery stage of ischemic stroke. 696 patients from 12 Class III Grade I hospitals nationwide were divided into 2 groups by central randomization system. The study group, 344 cases, were treated with Naoshuantong capsule plus Aspirin, and the control group, 352 cases, were treated with Aspirin. The patients were treated for 6 months. At the end of treatment, SS-QOL used for evaluating the quality of life was observed. The safety index was defined by adverse observation event. The incidence of adverse events and laboratory tests results were observed before and after treatment at the same time. The results indicated that compared to the control group, the treatment group had significant statistical difference in the impact of effort, self-care ability and the the work or labor ability of patients (P < 0.05). No serious adverse events were observed. Naoshuantong capsule showed some superiority to Asprin on improving the quality of life on patients with ischemic stroke, and it could be used in secondary prevention on the recovery stage of ischemic stroke. Naoshuantong capsule is safe and effective in the treatment of convalescence ischemic stroke.

Effect on push-out bond strength of glass-fiber posts functionalized with polydopamine using different adhesives.

PURPOSE: To evaluate the push-out bond strengths of prefabricated glass-fiber posts (Beijing Oya Biomaterials) with polydopamine functionalized to root dentin using two different resin cements (Paracore and RelyX Unicem) in different root regions (cervical, middle, and apical). MATERIALS AND METHODS: Forty extracted human, single-rooted teeth were endodontically treated and a 9-mm post space was prepared in each tooth with post drills provided by the manufacturer. Specimens were then randomly assigned into four groups (n = 10 per group), depending on the adhesive system and post surface treatment used: group IA (Paracore + polydopamine); group IB (Paracore + control); group IIA (RelyX Unicem + polydopamine); group IIB (RelyX Unicem + control). Following post cementation, the specimens were stored in distilled water at 37°C for 7 days. The push-out test was performed using a universal testing machine (0.5 mm/ min), and the failure modes were examined with a stereomicroscope. Data were statistically analyzed using twoway ANOVA (p = 0.05). RESULTS: Bond strengths (mean ± SD) were: 7.909 ± 3.166 MPa (group IA), 4.675 ± 2.170 MPa (group IB), 8.186 ± 2.766 MPa (group IIA), 4.723 ± 2.084 MPa (group IIB). The bond strength of polydopamine groups was significantly higher than one of the control groups (p < 0.0001). No significant difference was found in the micro push-out bond strengths between the two resin cement groups or the root regions (p > 0.05). Stereomicroscopic analysis showed a higher percentage of adhesive than cohesive failures in all groups. CONCLUSION: Surface polydopamine functionalization was confirmed to be a reliable method for improving the bond strength of resin luting agents to fiber posts. The bond strength of Paracore to fiber posts was not significantly different from that of RelyX Unicem, and considering its convenient application, Paracore can be recommended.

The adhesive strength and initial viscosity of denture adhesives.

OBJECTIVE: To examine the initial viscosity and adhesive strength of modern denture adhesives in vitro. MATERIALS AND METHODS: Three cream-type denture adhesives (Poligrip S, Corect Cream, Liodent Cream; PGS, CRC, LDC) and three powder-type denture adhesives (Poligrip Powder, New Faston, Zanfton; PGP, FSN, ZFN) were used in this study. The initial viscosity was measured using a controlled-stress rheometer. The adhesive strength was measured according to ISO-10873 recommended procedures. All data were analyzed independently by one-way analysis of variance combined with a Student-Newman-Keuls multiple comparison test at a 5% level of significance. RESULTS: The initial viscosity of all the cream-type denture adhesives was lower than the powder-type adhesives. Before immersion in water, all the powder-type adhesives exhibited higher adhesive strength than the cream-type adhesives. However, the adhesive strength of cream-type denture adhesives increased significantly and exceeded the powder-type denture adhesives after immersion in water. For powder-type adhesives, the adhesive strength significantly decreased after immersion in water for 60 min, while the adhesive strength of the cream-type adhesives significantly decreased after immersion in water for 180 min. CONCLUSION: Cream-type denture adhesives have lower initial viscosity and higher adhesive strength than powder type adhesives, which may offer better manipulation properties and greater efficacy during application.

[Fracture resistance of teeth restored with one-piece computer aided design and manufacture zirconia posts and cores: an in vitro study].

OBJECTIVE: To compare the fracture resistance of endodontically-treated teeth restored with prefabricated zirconia posts or one-piece computer aided design and computer aided manufacture (CAD/CAM) zirconia posts and cores, and unrestored endodontically-treated teeth. METHODS: Recently extracted human maxillary central incisors (n = 36) were endodontically treated and divided into three groups (n = 12 each): group 1 was restored with prefabricated zirconia posts (Comospost) and hot pressed ceramic cores; group 2 restored with one-piece CAD/CAM zirconia posts and cores; group 3 not restored. The teeth were fixed in a universal load-testing machine; a compressive load was applied at 135 degrees to the long axis of each tooth at a crosshead speed of 1 mm/min until fracture. One-way analysis of variance (Student-Newman-Keuls) was used to determine the significance of the differences in failure load between the groups. RESULTS: The mean fracture loads were (311.75 ± 70.12) N, (423.83 ± 54.58) N and (736.33 ± 82.91) N, respectively. The unrestored teeth exhibited significantly higher fracture resistance than the two groups of restored teeth. The teeth restored with one-piece CAD/CAM zirconia posts and cores had higher fracture resistance than the teeth restored with prefabricated zirconia posts and hot pressed ceramic cores (P < 0.001). CONCLUSION: Within the limitations of this study, the root canal-treated teeth restored with one-piece CAD/CAM zirconia posts and cores had a significantly higher failure resistance than the teeth restored with prefabricated zirconia posts. one-piece CAD/CAM zirconia posts and cores can offer some advantages for esthetic prosthodontics.

Utilizing systematic Mendelian randomization to identify potential therapeutic targets for mania.

Background: Mania has caused incalculable economic losses for patients, their families, and even society, but there is currently no effective treatment plan for this disease without side effects. Methods: Using bioinformatics and Mendelian randomization methods, potential drug target genes and key substances associated with mania were explored at the mRNA level. We used the chip expression profile from the GEO database to screen differential genes and used the eQTL and mania GWAS data from the IEU database for two-sample Mendelian randomization (MR) to determine core genes by colocalization. Next, we utilized bioinformatics analysis to identify key substances involved in the mechanism of action and determined related gene targets as drug targets. Results: After differential expression analysis and MR, a causal relationship between the expression of 46 genes and mania was found. Colocalization analysis yielded six core genes. Five key substances were identified via enrichment analysis, immune-related analysis, and single-gene GSVA analysis of the core genes. MR revealed phenylalanine to be the only key substance that has a unidirectional causal relationship with mania. In the end, SBNO2, PBX2, RAMP3, and QPCT, which are significantly associated with the phenylalanine metabolism pathway, were identified as drug target genes. Conclusion: SBNO2, PBX2, RAMP3, and QPCT could serve as potential target genes for mania treatment and deserve further basic and clinical research. Medicinal target genes regulate the phenylalanine metabolism pathway to achieve the treatment of mania. Phenylalanine is an important intermediate substance in the treatment of mania that is regulated by drug target genes.