RESUMO
The pulp and paper industry is an important contributor to global greenhouse gas emissions1,2. Country-specific strategies are essential for the industry to achieve net-zero emissions by 2050, given its vast heterogeneities across countries3,4. Here we develop a comprehensive bottom-up assessment of net greenhouse gas emissions of the domestic paper-related sectors for 30 major countries from 1961 to 2019-about 3.2% of global anthropogenic greenhouse gas emissions from the same period5-and explore mitigation strategies through 2,160 scenarios covering key factors. Our results show substantial differences across countries in terms of historical emissions evolution trends and structure. All countries can achieve net-zero emissions for their pulp and paper industry by 2050, with a single measure for most developed countries and several measures for most developing countries. Except for energy-efficiency improvement and energy-system decarbonization, tropical developing countries with abundant forest resources should give priority to sustainable forest management, whereas other developing countries should pay more attention to enhancing methane capture rate and reducing recycling. These insights are crucial for developing net-zero strategies tailored to each country and achieving net-zero emissions by 2050 for the pulp and paper industry.
Assuntos
Agricultura Florestal , Efeito Estufa , Gases de Efeito Estufa , Indústrias , Internacionalidade , Papel , Desenvolvimento Sustentável , Madeira , Efeito Estufa/prevenção & controle , Efeito Estufa/estatística & dados numéricos , Gases de Efeito Estufa/análise , Gases de Efeito Estufa/isolamento & purificação , Indústrias/legislação & jurisprudência , Indústrias/estatística & dados numéricos , Metano/análise , Metano/isolamento & purificação , Reciclagem/estatística & dados numéricos , Reciclagem/tendências , Países Desenvolvidos , Países em Desenvolvimento , Florestas , Agricultura Florestal/métodos , Agricultura Florestal/tendências , Desenvolvimento Sustentável/tendências , Clima TropicalRESUMO
The style and stigma at the apical gynoecium are crucial for flowering plant reproduction. However, the mechanisms underlying specification of the apical gynoecium remain unclear. Here, we demonstrate that Class II TEOSINTE BRANCHED 1/CYCLOIDEA/PCF (TCP) transcription factors are critical for apical gynoecium specification in Arabidopsis (Arabidopsis thaliana). The septuple tcp2 tcp3 tcp4 tcp5 tcp10 tcp13 tcp17 (tcpSEP) and duodecuple tcp2 tcp3 tcp4 tcp5 tcp10 tcp13 tcp17 tcp24 tcp1 tcp12 tcp18 tcp16 (tcpDUO) mutants produce narrower and longer styles, while disruption of TCPs and CRABS CLAW (CRC) or NGATHAs (NGAs) in tcpDUO crc or tcpDUO nga1 nga2 nga4 causes the apical gynoecium to be replaced by lamellar structures with indeterminate growth. TCPs are predominantly expressed in the apex of the gynoecium. TCP4 interacts with CRC to synergistically upregulate the expression level of NGAs, and NGAs further form high-order complexes to control the expression of auxin-related genes in the apical gynoecium by directly interacting with TCP4. Our findings demonstrate that TCP4 physically associates with CRC and NGAs to control auxin biosynthesis in forming fine structures of the apical gynoecium.
Assuntos
Proteínas de Arabidopsis , Arabidopsis , Flores , Regulação da Expressão Gênica de Plantas , Fatores de Transcrição , Arabidopsis/genética , Arabidopsis/metabolismo , Proteínas de Arabidopsis/metabolismo , Proteínas de Arabidopsis/genética , Fatores de Transcrição/metabolismo , Fatores de Transcrição/genética , Flores/genética , Flores/metabolismo , Flores/crescimento & desenvolvimento , MutaçãoRESUMO
Viral infection triggers host defenses through pattern-recognition receptor-mediated cytokine production, inflammasome activation, and apoptosis of the infected cells. Inflammasome-activated caspases are known to cleave cyclic GMP-AMP synthase (cGAS). Here, we found that apoptotic caspases are critically involved in regulating both DNA and RNA virus-triggered host defenses, in which activated caspase-3 cleaved cGAS, MAVS, and IRF3 to prevent cytokine overproduction. Caspase-3 was exclusively required in human cells, whereas caspase-7 was involved only in murine cells to inactivate cGAS, reflecting distinct regulatory mechanisms in different species. Caspase-mediated cGAS cleavage was enhanced in the presence of dsDNA. Alternative MAVS cleavage sites were used to ensure the inactivation of this critical protein. Elevated type I IFNs were detected in caspase-3-deficient cells without any infection. Casp3-/- mice consistently showed increased resistance to viral infection and experimental autoimmune encephalomyelitis. Our results demonstrate that apoptotic caspases control innate immunity and maintain immune homeostasis against viral infection.
Assuntos
Proteínas Adaptadoras de Transdução de Sinal/metabolismo , Apoptose , Caspases/metabolismo , Fator Regulador 3 de Interferon/metabolismo , Interferon Tipo I/metabolismo , Nucleotidiltransferases/metabolismo , Viroses/enzimologia , Proteínas Adaptadoras de Transdução de Sinal/genética , Animais , Caspase 2/genética , Caspase 2/metabolismo , Caspase 3/genética , Caspase 3/metabolismo , Caspase 7/genética , Caspase 7/metabolismo , Caspase 9/genética , Caspase 9/metabolismo , Caspases/genética , Feminino , Células HEK293 , Células HeLa , Interações Hospedeiro-Patógeno , Humanos , Imunidade Inata , Fator Regulador 3 de Interferon/genética , Masculino , Camundongos Endogâmicos C57BL , Nucleotidiltransferases/genética , Vírus Sendai/imunologia , Vírus Sendai/patogenicidade , Transdução de Sinais , Células THP-1 , Vaccinia virus/imunologia , Vaccinia virus/patogenicidade , Viroses/genética , Viroses/imunologia , Viroses/virologiaRESUMO
Viral infection triggers host innate immune responses that result in the production of various cytokines including type I interferons (IFN), activation of inflammasomes, and programmed cell death of the infected cells. Tight control of inflammatory cytokine production is crucial for the triggering of an effective immune response that can resolve the infection without causing host pathology. In examining the inflammatory response of Asc-/- and Casp1-/- macrophages, we found that deficiency in these molecules resulted in increased IFN production upon DNA virus infection, but not RNA virus challenge. Investigation of the underlying mechanism revealed that upon canonical and non-canonical inflammasome activation, caspase-1 interacted with cyclic GMP-AMP (cGAMP) synthase (cGAS), cleaving it and dampening cGAS-STING-mediated IFN production. Deficiency in inflammasome signaling enhanced host resistance to DNA virus in vitro and in vivo, and this regulatory role extended to other inflammatory caspases. Thus, inflammasome activation dampens cGAS-dependent signaling, suggesting cross-regulation between intracellular DNA-sensing pathways.
Assuntos
Caspase 1/imunologia , Infecções por Vírus de DNA/imunologia , Inflamassomos/imunologia , Nucleotidiltransferases/imunologia , Animais , Caspase 1/metabolismo , Infecções por Vírus de DNA/metabolismo , Modelos Animais de Doenças , Inflamassomos/metabolismo , Macrófagos/imunologia , Camundongos , Camundongos Endogâmicos C57BL , Camundongos Knockout , Nucleotidiltransferases/metabolismoRESUMO
STAT6 plays a prominent role in adaptive immunity by transducing signals from extracellular cytokines. We now show that STAT6 is required for innate immune signaling in response to virus infection. Viruses or cytoplasmic nucleic acids trigger STING (also named MITA/ERIS) to recruit STAT6 to the endoplasmic reticulum, leading to STAT6 phosphorylation on Ser(407) by TBK1 and Tyr(641), independent of JAKs. Phosphorylated STAT6 then dimerizes and translocates to the nucleus to induce specific target genes responsible for immune cell homing. Virus-induced STAT6 activation is detected in all cell-types tested, in contrast to the cell-type specific role of STAT6 in cytokine signaling, and Stat6(-/-) mice are susceptible to virus infection. Thus, STAT6 mediates immune signaling in response to both cytokines at the plasma membrane, and virus infection at the endoplasmic reticulum.
Assuntos
Imunidade Inata , Proteínas de Membrana/metabolismo , Infecções por Vírus de RNA/imunologia , Vírus de RNA , Fator de Transcrição STAT6/metabolismo , Proteínas Adaptadoras de Transdução de Sinal/metabolismo , Animais , Sequência de Bases , Camundongos , Camundongos Endogâmicos BALB C , Camundongos Knockout , Dados de Sequência Molecular , Fosforilação , Proteínas Serina-Treonina Quinases/metabolismo , Fator de Transcrição STAT6/genéticaRESUMO
BACKGROUND: Spermatogenesis is a highly regulated and complex process in which DNA methylation plays a crucial role. This study aimed to explore the differential methylation profiles in sperm DNA between patients with asthenospermia (AS) and healthy controls (HCs), those with oligoasthenospermia (OAS) and HCs, and patients with AS and those with OAS. RESULTS: Semen samples and clinical data were collected from five patients with AS, five patients with OAS, and six age-matched HCs. Reduced representation bisulfite sequencing (RRBS) was performed to identify differentially methylated regions (DMRs) in sperm cells among the different types of patients and HCs. A total of 6520, 28,019, and 16,432 DMRs were detected between AS and HC, OAS and HC, and AS and OAS groups, respectively. These DMRs were predominantly located within gene bodies and mapped to 2868, 9296, and 9090 genes in the respective groups. Of note, 12, 9, and 8 DMRs in each group were closely associated with spermatogenesis and male infertility. Furthermore, BDNF, SMARCB1, PIK3CA, and DDX27; RBMX and SPATA17; ASZ1, CDH1, and CHDH were identified as strong differentially methylated candidate genes in each group, respectively. Meanwhile, the GO analysis of DMR-associated genes in the AS vs. HC groups revealed that protein binding, cytoplasm, and transcription (DNA-templated) were the most enriched terms in the biological process (BP), cellular component (CC), and molecular function (MF), respectively. Likewise, in both the OAS vs. HC and AS vs. OAS groups, GO analysis revealed protein binding, nucleus, and transcription (DNA-templated) as the most enriched terms in BP, CC, and MF, respectively. Finally, the KEGG analysis of DMR-annotated genes and these genes at promoters suggested that metabolic pathways were the most significantly associated across all three groups. CONCLUSIONS: The current study results revealed distinctive sperm DNA methylation patterns in the AS vs. HC and OAS vs. HC groups, particularly between patients with AS and those with OAS. The identification of key genes associated with spermatogenesis and male infertility in addition to the differentially enriched metabolic pathways may contribute to uncovering the potential pathogenesis in different types of abnormal sperm parameters.
Assuntos
Astenozoospermia , Metilação de DNA , Oligospermia , Humanos , Masculino , Astenozoospermia/genética , Adulto , Oligospermia/genética , Espermatozoides/metabolismo , Espermatogênese/genética , Estudos de Casos e Controles , Epigênese GenéticaRESUMO
As the dimensionality of materials generally affects their characteristics, thin films composed of low-dimensional nanomaterials, such as nanowires (NWs) or nanoplates, are of great importance in modern engineering. Among various bottom-up film fabrication strategies, interfacial assembly of nanoscale building blocks holds great promise in constructing large-scale aligned thin films, leading to emergent or enhanced collective properties compared to individual building blocks. As for 1D nanostructures, the interfacial self-assembly causes the morphology orientation, effectively achieving anisotropic electrical, thermal, and optical conduction. However, issues such as defects between each nanoscale building block, crystal orientation, and homogeneity constrain the application of ordered films. The precise control of transdimensional synthesis and the formation mechanism from 1D to 2D are rarely reported. To meet this gap, we introduce an interfacial-assembly-induced interfacial synthesis strategy and successfully synthesize quasi-2D nanofilms via the oriented attachment of 1D NWs on the liquid interface. Theoretical sampling and simulation show that NWs on the liquid interface maintain their lowest interaction energy for the ordered crystal plane (110) orientation and then rearrange and attach to the quasi-2D nanofilm. This quasi-2D nanofilm shows enhanced electric conductivity and unique optical properties compared with its corresponding 1D geometry materials. Uncovering these growth pathways of the 1D-to-2D transition provides opportunities for future material design and synthesis at the interface.
RESUMO
Modern cultivated rice (Oryza sativa) typically experiences limited growth benefits from arbuscular mycorrhizal (AM) symbiosis. This could be due to the long-term domestication of rice under favorable phosphorus conditions. However, there is limited understanding of whether and how the rice domestication has modified AM properties. This study compared AM properties between a collection of wild (Oryza rufipogon) and domesticated rice genotypes and investigated the mechanisms underlying their differences by analyzing physiological, genomic, transcriptomic, and metabolomic traits critical for AM symbiosis. The results revealed significantly lower mycorrhizal growth responses and colonization intensity in domesticated rice compared to wild rice, and this change of AM properties may be associated with the domestication modifications of plant phosphorus utilization efficiency at physiological and genomic levels. Domestication also resulted in a decrease in the activity of the mycorrhizal phosphorus acquisition pathway, which may be attributed to reduced mycorrhizal compatibility of rice roots by enhancing defense responses like root lignification and reducing carbon supply to AM fungi. In conclusion, rice domestication may have changed its AM properties by modifying P nutrition-related traits and reducing symbiotic compatibility. This study offers new insights for improving AM properties in future rice breeding programs to enhance sustainable agricultural production.
Assuntos
Domesticação , Micorrizas , Oryza , Fósforo , Simbiose , Micorrizas/fisiologia , Oryza/microbiologia , Oryza/genética , Oryza/fisiologia , Fósforo/metabolismo , Raízes de Plantas/microbiologia , Regulação da Expressão Gênica de Plantas , Característica Quantitativa Herdável , GenótipoRESUMO
A temperature-insensitive high-sensitivity refractive index sensor is proposed and experimentally demonstrated, which is based on utilization of a thinned helical fiber grating but with an intermediate period (THFGIP). Attributed to the reduced diameter and an intermediate period of the grating, the proposed sensor has a high surrounding refractive-index (SRI) sensitivity and a low temperature sensitivity. The average SRI sensitivity of the proposed sensor is up to 829.9â nm/RIU in the range of 1.3410-1.4480 RIU. Moreover, unlike the traditional sensitivity-enhancement method by increasing the waveguide dispersion factor, here the waveguide dispersion factor at the resonant wavelength was decreased by reducing the diameter of the fiber grating and as a result, the crosstalk effect due to the temperature change can be further suppressed. The proposed temperature-insensitive SRI sensor has the superiorities of simple structure, ease fabrication, and low cost, which could be found more potential applications in the SRI sensing fields.
RESUMO
A full C- and L-band covered second-order orbital-angular-momentum (OAM) mode generator has been proposed and experimentally demonstrated, which is realized by using a helical long-period fiber grating (HLPG) but inscribed in a thinned four-mode fiber. By optimizing the design of grating period and fiber diameter of the proposed HLPG, an ultra-broadband rejection filter with a depth of â¼23â dB, a bandwidth of â¼156â nm @-10â dB (ranging from 1522â nm to 1678â nm) and a bandwidth of â¼58â nm @-20â dB (ranging from 1574â nm to 1632â nm), has been successfully obtained as a typical sample. To the best of our knowledge, this is the first demonstration of such ultra-broadband second-order OAM mode generator by using only one fiber component, i.e., the thinned HLPG. In addition, the proposed generator is less polarization-dependent and less temperature-sensitive than those of the conventional HLPGs, which is believed to be considerably helpful to find potential applications of the device itself in wavelength division multiplexing (WDM) and OAM mode division multiplexing (MDM) optical fiber communication systems.
RESUMO
BACKGROUND: Genome-scale metabolic models (GEMs) serve as effective tools for understanding cellular phenotypes and predicting engineering targets in the development of industrial strain. Enzyme-constrained genome-scale metabolic models (ecGEMs) have emerged as a valuable advancement, providing more accurate predictions and unveiling new engineering targets compared to models lacking enzyme constraints. In 2022, a stoichiometric GEM, iDL1450, was reconstructed for the industrially significant fungus Myceliophthora thermophila. To enhance the GEM's performance, an ecGEM was developed for M. thermophila in this study. RESULTS: Initially, the model iDL1450 underwent refinement and updates, resulting in a new version named iYW1475. These updates included adjustments to biomass components, correction of gene-protein-reaction (GPR) rules, and a consensus on metabolites. Subsequently, the first ecGEM for M. thermophila was constructed using machine learning-based kcat data predicted by TurNuP within the ECMpy framework. During the construction, three versions of ecGEMs were developed based on three distinct kcat collection methods, namely AutoPACMEN, DLKcat and TurNuP. After comparison, the ecGEM constructed using TurNuP-predicted kcat values performed better in several aspects and was selected as the definitive version of ecGEM for M. thermophila (ecMTM). Comparing ecMTM to iYW1475, the solution space was reduced and the growth simulation results more closely resembled realistic cellular phenotypes. Metabolic adjustment simulated by ecMTM revealed a trade-off between biomass yield and enzyme usage efficiency at varying glucose uptake rates. Notably, hierarchical utilization of five carbon sources derived from plant biomass hydrolysis was accurately captured and explained by ecMTM. Furthermore, based on enzyme cost considerations, ecMTM successfully predicted reported targets for metabolic engineering modification and introduced some new potential targets for chemicals produced in M. thermophila. CONCLUSIONS: In this study, the incorporation of enzyme constraint to iYW1475 not only improved prediction accuracy but also broadened the model's applicability. This research demonstrates the effectiveness of integrating of machine learning-based kcat data in the construction of ecGEMs especially in situations where there is limited measured enzyme kinetic parameters for a specific organism.
Assuntos
Aprendizado de Máquina , Redes e Vias Metabólicas , Sordariales , Sordariales/metabolismo , Sordariales/enzimologia , Sordariales/genética , Engenharia Metabólica/métodos , Biomassa , Modelos Biológicos , Cinética , Genoma FúngicoRESUMO
Upgrading to the CHINA 7 standard is crucial for managing air pollution from passenger vehicles in China. Meanwhile, China aims to achieve carbon neutrality by 2060, which necessitates large-scale replacement of gasoline vehicles with electric vehicles in the future. Consequently, the public might view upgrading gasoline vehicles to the CHINA 7 standard as redundant. However, the emission reduction benefits of upgrading standards in the context of uncertain electrification ambitions have not received adequate attention. Here, we show that upgrading standards will compensate for the absence of emissions reductions due to hindered electrification efforts. In the best scenario, China's CO2 emissions can be reduced to 0.047 Gt and NOx to 8.2 × 103 t in 2050. In nonextreme electrification scenarios with CHINA 7 standard, the emission intensity reduction will remain the main driver for emission reductions, outweighing the electrification contribution. In extreme electrification scenarios, upgrading standards will tackle the increased emissions from plug-in hybrid electric vehicles. Our fleet-level results advocate for early standards upgrades to enhance resilience against air pollution risks arising from uncertainties in electrification. Our evidence from China, with one of the most stringent emission standards, can provide a reference point for the world on the upgrading passenger vehicle emission standard issue.
Assuntos
Poluentes Atmosféricos , Poluição do Ar , Emissões de Veículos/prevenção & controle , Emissões de Veículos/análise , Poluentes Atmosféricos/análise , Gasolina , Incerteza , Poluição do Ar/prevenção & controle , Poluição do Ar/análise , China , Veículos AutomotoresRESUMO
Typically, SO2 unavoidably deactivates catalysts in most heterogeneous catalytic oxidations. However, for Pt-based catalysts, SO2 exhibits an extraordinary boosting effect in propane catalytic oxidation, but the promotive mechanism remains contentious. In this study, an in situ-formed tactful (Pt-S-O)-Ti structure was concluded to be a key factor for Pt/TiO2 catalysts with a substantial SO2 tolerance ability. The experiments and theoretical calculations confirm that the high degree of hybridization and orbital coupling between Pt 5d and S 3p orbitals enable more charge transfer from Pt to S species, thus forming the (Pt-S-O)-Ti structure with the oxygen atom dissociated from the chemisorbed O2 adsorbed on oxygen vacancies. The active oxygen atom in the (Pt-S-O)-Ti active structure is a robust site for C3H8 adsorption, leading to a better C3H8 combustion performance. This work can provide insights into the rational design of chemical bonds for high SO2 tolerance catalysts, thereby improving economic and environmental benefits.
Assuntos
Oxigênio , Titânio , Titânio/química , Oxirredução , Catálise , AdsorçãoRESUMO
Oncolytic peptides represented potential novel candidates for anticancer treatments especially drug-resistant cancer cell lines. One of the most promising and extensively studied is LTX-315, which is considered as the first in class oncolytic peptide and has entered phase I/II clinical trials. Nevertheless, the shortcomings including poor proteolytic stability, moderate anticancer durability and high synthesis costs may hinder the widespread clinical applications of LTX-315. In order to reduce the synthesis costs, as well as develop derivatives possessing both high protease-stability and durable anticancer efficiency, twenty LTX-315-based derived-peptides were designed and efficiently synthesized. Especially, through solid-phase S-alkylation, as well as the optimized peptide cleavage condition, the derived peptides could be prepared with drastically reduced synthesis cost. The in vitro anticancer efficiency, serum stability, anticancer durability, anti-migration activity, and hemolysis effect were systematically investigated. It was found that derived peptide MS-13 exhibited comparable anticancer efficiency and durability to those of LTX-315. Strikingly, the D-type peptide MS-20, which is the enantiomer of MS-13, was demonstrated to possess significantly high proteolytic stability and sustained anticancer durability. In general, the cost-effective synthesis and stability-guided structural optimizations were conducted on LTX-315, affording the highly hydrolysis resistant MS-20 which possessed durable anticancer activity. Meanwhile, this study also provided a reliable reference for the future optimization of anticancer peptides through the solid-phase S-alkylation and L-type to D-type amino acid substitutions.
Assuntos
Antineoplásicos , Humanos , Antineoplásicos/farmacologia , Antineoplásicos/química , Antineoplásicos/síntese química , Relação Estrutura-Atividade , Ensaios de Seleção de Medicamentos Antitumorais , Proliferação de Células/efeitos dos fármacos , Estrutura Molecular , Linhagem Celular Tumoral , Relação Dose-Resposta a Droga , Movimento Celular/efeitos dos fármacos , Peptídeos/química , Peptídeos/farmacologia , Peptídeos/síntese química , Hemólise/efeitos dos fármacos , OligopeptídeosRESUMO
Context: Osteoporosis (OP) is a common complication for patients who have liver cirrhosis or cholestatic liver disease or who have received a liver transplantation. Osteoporotic fractures are serious clinical consequences of OP, and they often occur in the spine, hip, and wrist; have a high disability and mortality rate; cause a serious, social, medical burden; and threaten people's health. Objective: The study intended to explore the correlation between different degrees of liver fibrosis and bone mineral density (BMD) of the lumbar spine and hip as well as the factors influencing those differences. Design: The research team performed a retrospective observational study. Setting: The study took place at the First Affiliated Hospital of the Medical College at Ningbo University (Bund Courtyard) in Ningbo, China. Participants: Participants were 164 patients who had received two-dimensional shear wave elastography (2D-SWE) to measure liver stiffness and dual-energy X-ray absorptiometry (DEXA) to measure bone density at the First Affiliated Hospital of Ningbo University (Bund Courtyard) in Ningbo from May 2020 to April 2022. Groups: According to the liver-stiffness value, the research team divided participants into three groups: (1) the F0-F1 group with no or mild liver fibrosis, (2) the F2 group with significant liver fibrosis, and (3) F3-F4 group with severe liver fibrosis. For the three groups, the research team also compared the differences between the groups-F0-F1 to F2, F0-F1 to F3-F4, and F2 to F3-F4-in the BMD of the lumbar spine-Total, L2, L3, L4-and of the hip-Total, Neck, and Troch. Outcome Measures: The research team: (1) determined participants' degrees of liver fibrosis to create the F0-F1, F2, and F3-F4 groups and compared the BMDs of the lumbar spine and hip among those groups; (2) compared the degrees of liver fibrosis for three age groups-<40, 40-60, and ≥60 years old; (3) compared the degrees of liver fibrosis for participants with two etiologies of the disease-hepatitis or other causes; and (4) analyzed the correlations between different degrees of liver fibrosis and BMD of the lumbar spine and hip and the factors influencing those relationships. Results: The study revealed significant differences among the F0-F1, F2, and F3-F4 groups in terms of age group, degree of liver fibrosis, and bone mineral density (BMD) at various sites. Specifically, there were significant age group differences between individuals aged 40-60 years and those aged ≥60 years (P < .05). There were also significant differences noted in the degree of liver fibrosis with mean values of 5.59 ± 0.81, 7.43 ± 0.26, and 15.48 ± 10.02 for the F0-F1, F2, and F3-F4 groups, respectively (P < .05). The BMDs of the lumbar spine (L2, L3, L4, and Total values) and hip (Total values, right femoral neck (Neck), and trochantor (Troch)) showed significant differences (all P < .05). However, no significant differences were found in the BMDs for the L1 vertebra and Ward's triangle among the groups (both P > .05). The analysis also revealed that the mean BMDs of the F2 group were significantly higher than those of the F0-F1 and F3-F4 groups. Furthermore, there was a positive correlation between the F2 and F0-F1 groups and a negative correlation between the F2 and F3-F4 groups (P < .05). The logistic regression analysis showed that age group (OR = 2.047, 95% CI: 0.135-1.298, P = .016) and Total BMD for the hip (OR = 176.368, 95% CI: 0.233-10.112, P = .040) were significantly, independently correlated with the degree of liver fibrosis. Conclusions: According to the findings of the present study, a positive correlation was observed between liver stiffness and bone mineral density (BMD) values in patients at the F0-F1 to F2 stage of liver fibrosis. In contrast, a significant negative correlation was identified between these parameters in patients at the F2 to F3-F4 stage, indicating that BMD tends to decrease as the degree of liver fibrosis increases. These results suggest a potential link between liver fibrosis and bone health. The comparisons between groups F0-F1 and F3-F4 with group F2. Specifically, the study found that the BMD values of the F2 group were significantly higher than those of the F0-F1 and F3-F4 groups.
Assuntos
Densidade Óssea , Osteoporose , Adulto , Humanos , Pessoa de Meia-Idade , Cirrose Hepática/complicações , Absorciometria de Fóton , Osteoporose/etiologia , Coluna VertebralRESUMO
We present a new approach to achieving strong coupling between electrically injected excitons and photonic bound states in the continuum of a dielectric metasurface. Here a high-finesse metasurface cavity is monolithically patterned in the channel of a perovskite light-emitting transistor to induce a large Rabi splitting of â¼200 meV and more than 50-fold enhancement of the polaritonic emission compared to the intrinsic excitonic emission of the perovskite film. Moreover, the directionality of polaritonic electroluminescence can be dynamically tuned by varying the source-drain bias, which induces an asymmetric distribution of exciton population within the transistor channel. We argue that this approach provides a new platform to study strong light-matter interactions in dispersion engineered photonic cavities under electrical injection and paves the way to solution-processed electrically pumped polariton lasers.
RESUMO
Soil microbes are fundamental to ecosystem health and productivity. How soil microbial communities are influenced by elevated atmospheric carbon dioxide (eCO2) concentration and nitrogen (N) deposition under heavy metal pollution remains uncertain, despite global exposure of terrestrial ecosystems to eCO2, high N deposition and heavy metal stress. Here, we conducted a four year's open-top chamber experiment to assess the effects of soil cadmium (Cd) treatment (10 kg hm-2 year-1) alone and combined treatments of Cd with eCO2 concentration (700 ppm) and/or N addition (100 kg hm-2 year-1) on tree growth and rhizosphere microbial community. Relative to Cd treatment alone, eCO2 concentration in Cd contaminated soil increased the complexity of microbial networks, including the number links, average degree and positive/negative ratios. The combined effect of eCO2 and N addition in Cd contaminated soil not only increased the complexity of microbial networks, but also enhanced the abundance of microbial urealysis related UreC and nitrifying related amoA1 and amoA2, and the richness of arbuscular mycorrhiza fungi (AMF), thereby improving the symbiotic functions between microorganisms and plants. Results from correlation analysis and structural equation model (SEM) further demonstrated that eCO2 concentration and N addition acted on functions and networks differently. Elevated CO2 positively regulated microbial networks and functions through phosphorus (P) and Cd concentration in roots, while N addition affected microbial functions through soil available N and soil organic carbon (SOC) concentration and microbial network through soil Cd concentration. Overall, our findings highlight that eCO2 concentration and N addition make microbial communities towards ecosystem health that may mitigate Cd stress, and provide new insights into the microbiology supporting phytoremediation for Cd contaminated sites in current and future global change scenarios.
Assuntos
Metais Pesados , Microbiota , Rizosfera , Cádmio/química , Simbiose , Dióxido de Carbono/análise , Nitrogênio/análise , Carbono , Microbiologia do Solo , Solo/química , Metais Pesados/análiseRESUMO
Urban land is a fundamental but scarce resource that carries intensive human socio-economic activities. The demographic decline and housing vacancy issues that emerged with de-industrialization have raised concerns regarding the sustainable utilization of urban land resources, particularly in the American Rust Belt region. In this context, a comprehensive analysis of industrial land use can offer valuable insights to support the sustainable planning of shrinking cities. However, existing urban land research exhibits insufficient resolution at the sectoral scale and impedes the evaluation of industrial land use efficiency within the urban context. To address this gap, we established an integrated land use estimation framework for economic sectors based on multi-source data, which enables the assessment of land use efficiency at a finer sectoral scale. The method was then applied to the city of Detroit, Cleveland, and Pittsburgh. The results demonstrate that the current industrial land mix in the three cities is dominated by service-providing industries, but the land usage by goods-producing sectors in these cities presents a relatively high level of efficiency. The Moran's I value indicates a clustered tendency for the main economic sectors. The land use area results reveal that Other Services occupies the most land area in Detroit (2.29 million m2) and Cleveland (2.04 million m2). While in Pittsburgh, Professional Scientific and Technical Services (1.44 million m2) is the largest. In terms of the economic output, Management of Companies and Enterprises is the most efficient sector in Detroit (20.28 thousand $/m2) and Cleveland (29.43 thousand $/m2), while Pittsburgh's Public Administration (11.73 thousand $/m2) is the most efficient. As many other cities in the world are about to enter the era of de-industrialization or low growth, the outcomes can also serve as a reference to guide their sustainable revitalization in line with the SDGs.
Assuntos
Indústrias , Urbanização , Humanos , Cidades , China , Conservação dos Recursos NaturaisRESUMO
Serving as a vital linkage between surface water and groundwater, the hyporheic zone (HZ) plays a fundamental role in improving water quality and maintaining ecological security. In arid or semi-arid areas, effluent discharge from wastewater treatment facilities could occupy a predominant proportion of the total base flow of receiving rivers. Nonetheless the relationship between microbial activity, abundance and environmental factors in the HZ of effluent-receiving rivers appear to be rarely addressed. In this study, a spatiotemporal field study was performed in two representative effluent-dominated receiving rivers in Xi'an, China. Land use data, physical and chemical water quality parameters of surface and subsurface water were used as predictive variables, while the microbial respiratory electron transport system activity (ETSA), the Chao1 and Shannon index of total microbial community, as well as the Chao1 and Shannon index of denitrifying bacteria community were used as response variables, while ETSA was used as response variables indicating ecological processes and Shannon and Chao1 were utilized as parameters indicating microbial diversity. Two machine learning models were utilized to provide evidence-based information on how environmental factors interact and drive microbial activity and abundance in the HZ at variable depths. The models with Chao1 and Shannon as response variables exhibited excellent predictive performances (R2: 0.754-0.81 and 0.783-0.839). Dissolved organic nitrogen (DON) was the most important factor affecting the microbial functions, and an obvious threshold value of â¼2 mg/L was observed. Credible predictions of models with Chao1 and Shannon index of denitrifying bacteria community as response variables were detected (R2: 0.484-0.624 and 0.567-0.638), with soluble reactive phosphorus (SRP) being the key influencing factor. Fe (â ¡) was favorable in predicting denitrifying bacteria community. The ESTA model highlighted the importance of total nitrogen in the ecological health monitoring in HZ. These findings provide novel insights in predicting microbial activity and abundance in highly-impacted areas such as the HZ of effluent-dominated receiving rivers.
Assuntos
Microbiota , Rios , Rios/microbiologia , Águas Residuárias , Bactérias , Qualidade da ÁguaRESUMO
Domestic sheep and their wild relatives harbor substantial genetic variants that can form the backbone of molecular breeding, but their genome landscapes remain understudied. Here, we present a comprehensive genome resource for wild ovine species, landraces and improved breeds of domestic sheep, comprising high-coverage (â¼16.10×) whole genomes of 810 samples from 7 wild species and 158 diverse domestic populations. We detected, in total, â¼121.2 million single nucleotide polymorphisms, â¼61 million of which are novel. Some display significant (P < 0.001) differences in frequency between wild and domestic species, or are private to continent-wide or individual sheep populations. Retained or introgressed wild gene variants in domestic populations have contributed to local adaptation, such as the variation in the HBB associated with plateau adaptation. We identified novel and previously reported targets of selection on morphological and agronomic traits such as stature, horn, tail configuration, and wool fineness. We explored the genetic basis of wool fineness and unveiled a novel mutation (chr25: T7,068,586C) in the 3'-UTR of IRF2BP2 as plausible causal variant for fleece fiber diameter. We reconstructed prehistorical migrations from the Near Eastern domestication center to South-and-Southeast Asia and found two main waves of migrations across the Eurasian Steppe and the Iranian Plateau in the Early and Late Bronze Ages. Our findings refine our understanding of genome variation as shaped by continental migrations, introgression, adaptation, and selection of sheep.