Peri-implant tissue augmentation by volume-stable collagen matrix transplantation: a study of dog mandibles.

The aim of this study was to investigate histologically the amount of peri-implant tissue augmentation after volume-stable porcine collagen matrix transplantation. Six male beagle dogs were used in the experiment. P2, P4, and M1 distal roots were extracted under general anesthesia. After 6 months, implants were placed in the same sites, and volume-stable porcine collagen matrix transplantation was performed. Impressions were taken at 1 and 2 weeks and at 1, 2, and 3 months after transplantation. The dogs were euthanized at 3 months, and their mandibles were removed and scanned using micro-computed tomography. Standard Triangulated Language data were also obtained. Using preoperative models as a reference, the data for all time points were compared, and changes in the thickness of the cross-section of the implant sites were measured. The model created at 3 months was then compared with the mandible data, and the thickness of collected peri-implant soft tissue was measured under optical microscopy. Increased thickness was found at some of the sites on the buccal side. Regarding the peri-implant soft tissue, the thickness of the measured sites on the buccal side was significantly increased at 3 months in the experimental group. Histological observations of the internal structures of the tissue in the experimental group revealed irregular collagen fibers and a remnant collagen matrix. Endogenous tissue was observed within the collagen matrix, indicating good fusion with the surrounding autologous tissue. These results suggest that volume-stable porcine collagen matrix transplantation promotes peri-implant tissue augmentation on the buccal side.

Elevated (Pro)renin Receptor Expression by Anti-Cancer Drugs, Carboplatin and Paclitaxel, in Cultured Cancer Cells: Possible Involvement of Apoptosis and Autophagy.

(Pro)renin receptor [(P)RR] is a component of the renin-angiotensin system and plays an essential role in the activity of vacuolar H+-ATPase and autophagy. (P)RR is expressed in cancer cells. However, the relationship among (P)RR, apoptosis and autophagy in the treatment of anti-cancer drugs has not been clarified. The aim of this study was to clarify the effects of anti-cancer drugs with autophagy-promoting activity on (P)RR expression in cancer cells. MCF-7 breast cancer cells and A549 lung cancer cells were treated with carboplatin or paclitaxel, and the expression of (P)RR, apoptosis markers and autophagy markers were assessed by RT-qPCR, western blot analysis and immunocytochemistry. Expression levels of (P)RR mRNA and soluble (P)RR protein were increased by carboplatin or paclitaxel in a dose-dependent manner. Immunofluorescence staining of (P)RR was increased in both MCF-7 and A549 cells treated by carboplatin or paclitaxel. Apoptosis induction was shown by elevated BAX/BCL2 mRNA levels and increased active caspase3-positive cells. Moreover, autophagy induction was confirmed by increased levels of autophagy-associated mRNAs and LC3B-II proteins. (P)RR knockdown by (P)RR-specific siRNA suppressed the cell viability in MCF-7 cells and A549 cells under the treatment of carboplatin or paclitaxel, suggesting that (P)RR deficiency inhibits the proliferation of cancer cells in a pathway different from carboplatin or paclitaxel. The present study showed that the expression of (P)RR mRNA and soluble (P)RR was increased by anti-cancer drugs with autophagy-promoting activity. Upregulated (P)RR and autophagy may constitute a stress adaptation that protects cancer cells from apoptosis.

Effect of impression holding time and tray removal speed on the dimensional accuracy of impressions for artificial abutment tooth inclined.

Oral scanners allow dental impressions to be taken in a short time without the use of an impression material. However, it has been noted that high impression accuracy cannot be obtained in cases where the abutment is inclined or in cases where the span is long. Consequently, in daily clinical practice, impressions are often created using silicone impression material. When taking an impression using silicone impression material, the curing time or the removal time of the impression material are often based on the intuition of the dental staff. This study investigated the effects of impression holding time and impression tray removal speed on the dimensional accuracy of impressions. A specimen with an abutment inclined 30° to the removal direction of an impression was prepared. Four types of silicone rubber impression materials were used. Impressions were taken with two levels of holding time and two levels of removal speed using an autograph. The diameter of stone models was measured at 3, 6, and 9 mm from the baseline of each. The height of the inclined and opposite sides was also measured. Two-way analysis of variance was used to analyze data regarding the assessment of the effects of holding time and tray removal speed. The reproducibility of the impressions was affected by the volume of undercut caused by the inclined abutment. For a large undercut, longer holding times and faster tray removal speeds are recommended to reduce the deformation of silicone rubber impressions.

Effects of toothbrush abrasion on surface and antibacterial properties of hydroxyapatite-tryptophan complex with gray titania.

Photocatalysts have attracted attention in the medical field for their antibacterial effects. However, typical photocatalysts are activated by ultraviolet rays, which may have adverse effects. Therefore, we focused on a new photocatalyst that is activated by visible light, hydroxyapatite (HAp), and amino acid complex with gray titania, and evaluated its antibacterial effects against Porphyromonas gingivalis and effect by toothbrushing. The test sample was a titanium alloy substrate, and four surface treatments were applied: (1) substrate only, (2) substrate with HAp complex, (3) substrate with HAp complex with gray titania, and (4) HAp-tryptophan complex with gray titania (TR). These surface treatments were evaluated with or without toothbrushing (8 total groups). Surface roughness (Sa), fluorescent X-ray analysis (XRF), and scanning electron microscopy (SEM) were used to evaluate surface properties. To investigate antibacterial effects, each sample was seeded with P. gingivalis, irradiated with red light, and total viable bacterial count was determined. For Sa measurement, TR showed no significant difference after toothbrushing. However, in XRF and SEM observation, TR exhibited peeling of the applied coating after toothbrushing. In the antibacterial test, TR showed a decrease in P. gingivalis under no toothbrushing condition. Conversely, with toothbrushing, the TR coating appeared to peel. However, no significant difference in P. gingivalis count was observed among all groups. HAp-tryptophan complex with gray titania coating showed an antibacterial effect against P. gingivalis when irradiated with visible light. However, toothbrushing can result in coat peeling and consequently reduce the antibacterial effect.

Effects of porcelain veneering methods on conformity of the marginal and internal fit of three-unit zirconia framework.

The purpose of this study is to investigate the effects of porcelain veneering methods on the marginal and internal fit of a three-unit zirconia framework. A zirconia master model, in which the lower-left second premolar and the second left molar were used as the abutment, was obtained using an intraoral scanner. Based on the data, three-unit zirconia frameworks for fabricating all-ceramic bridges were designed and milled (FW group). Two types of all-ceramic bridge were fabricated by veneering porcelain onto these frameworks using the press-over technique (P group) and the layering technique (L group). The replica technique was used to measure the gap size between the abutments and the bridges. Measurements were taken in the marginal opening area (MO), chamfer area (CH), axial area (AX), and occlusal area (OC). Statistical analysis was performed using the Mann-Whitney U-test. There was no significant difference in MO and CH between the P and L groups. However, in AX, the L group had a significantly larger gap size than that of the P group (p = 0.003). In addition, compared with the FW group, the P group showed a significantly larger gap size in MO (p < 0.000), CH (p = 0.008), and OC (p < 0.000). These results indicate that the gap size increased after porcelain veneering using the press-over and layering techniques. In addition, the all-ceramic bridges fabricated using the press-over and layering techniques had approximately equal gap sizes in MO.

Marginal and internal fit of three-unit fixed dental prostheses fabricated from translucent multicolored zirconia: Framework versus complete contour design.

STATEMENT OF PROBLEM: Translucent multicolored zirconia materials enable more esthetic complete contour zirconia fixed dental prostheses (FDPs) than conventional zirconia, which exhibits low translucency and high opacity and is monochromatic. However, how the marginal and internal fit of translucent multicolored zirconia FDPs compare with those of traditional frameworks that require veneering is unclear. PURPOSE: The purpose of this in vitro study was to compare the marginal and internal fit of frameworks and complete contour 3-unit FDPs fabricated from translucent multicolored zirconia. MATERIAL AND METHODS: Frameworks with a thickness of 0.5 mm and complete contour FDPs with a thickness of 0.8 to 1.5 mm were manufactured by using a workflow similar to one from a zirconia master model (mandibular left second premolar-mandibular left second molar). Two polyvinyl siloxane replicas were made for each specimen to measure the marginal and internal fit. Measurement locations were mesial, lingual, buccal, and distal for each abutment. In these locations, the marginal opening (MO), chamfer area (CA), axial wall (AW), and occlusal area (OC) were measured. The data were analyzed with 2-way ANOVA and the Bonferroni post hoc test (α=.05). RESULTS: Frameworks showed significantly better mean ±standard deviation fit values than complete contour 3-unit FDPs at measurement areas MO (frameworks: 112 ±22 µm, complete contour FDPs: 144 ±37 µm) (P=.013), CA (frameworks: 89 ±12 µm, complete contour FDPs: 110 ±22 µm) (P=.006), and OC (frameworks: 182 ±36 µm, complete contour FDPs: 244 ±64 µm) (P=.008). At the measurement area AW (frameworks: 47 ±7 µm, complete contour FDPs: 50 ±9 µm of each location, no significant difference was observed between frameworks and complete contour FDPs (P=.361). CONCLUSIONS: Design differences in 3-unit FDPs fabricated from translucent multicolored zirconia influenced the marginal and internal fit. Frameworks had smaller marginal fit than complete contour FDPs for translucent multicolored zirconia.

Effects of heat conduction of implant surface at thermal stimulation on implant placement.

The purpose of this study is to investigate, in vitro, how two different implant placement methods (one and two-stage implant placement) affect implant surface temperature after thermal stimulation. Two titanium screw implants were used and three thermocouples were attached to the implant surface at 0.5 mm (ch1), 5.5 mm (ch2) and 9.0 mm (ch3) under each platform. Experimental devices were fabricated pouring polymerization resin under a condition that imitated the two embedded technique with the one-stage implant placement model (1-stage) and the two-stage implant placement model (2-stage). A hot water storage device was installed in each model and hot water at three temperatures (60 °C, 70 °C and 100 °C) was flowed. The temperature change over time at the implant surface by the thermocouple was recorded. From the measurement data, the maximum temperature (Max-temp) at the implant surface, the time to reach 47 °C (47 °C r-time), and the duration of 47 °C or more (47 °C c-time) were calculated, and the test was repeated 26 times using the same method. The mean of repeated measurements was determined and statistical analysis was performed. Max-temp showed significant differences between each implant placement method, each channel and each thermal stimulation (p < 0.01). In this study suggested that the implant surface could reach 47 °C with 60 °C thermal stimulation in a 1-stage. In addition, it rose over 47 °C at 70 °C. The 2-stage implant surface did not rise to 47 °C.

Dental implant care and trouble among dependent patients based on the questionnaire survey among Japanese dental practitioners.

BACKGROUND: Self-care and professional care of implants may prove difficult for elderly people who require nursing care. However, the actual state of care and problems remains unknown. In this study, we investigated the actual state of implant problems in elderly people living in their own home or in a nursing home who received visiting dental treatment. METHODS: We mailed questionnaire survey forms to 2339 representatives or specialists who were members of the Japanese Society of Oral Implantology, the Japanese Society of Gerodontology or the Japan Prosthodontic Society. We narrowed down the respondents to those who provided visiting dental treatment, and analyzed the actual state of implants observed during visiting dental treatment (type, care, problems, countermeasures, etc.). RESULTS: Of the 924 dentists who responded to the questionnaire survey, 291 (22%) provided visiting dental treatment. While the majority of implant types encountered in the previous 12 months were root-form implants, there were still a certain number of blade and subperiosteal implants. Daily implant care involved mostly cleaning with a toothbrush + auxiliary tools. The most frequent implant problems encountered in the past were difficulty in cleaning and peri-implantitis. Medication and antiphlogistic treatment were most frequently adopted as countermeasures to implant problems, followed by observation. When we classified the results into those for the dentists who provided implant treatment and those for the dentists who did not, we found that many of the dentists who did not provide implant treatment opted for observation or medication, while those who provided implant treatment also implemented removal of superstructure, retightening of screws, repair and so forth. CONCLUSIONS: We found that many of the implant troubles encountered by dentists who provided visiting dental care were difficulty in cleaning or peri-implantitis, and that the actions taken against these troubles varied depending on the experience of the dentist performing the implant treatment. Our study also revealed that dentists who provide visiting dental care need to acquire knowledge and skills of implant treatment, to have actions prepared in case they encounter such cases, or to closely coordinate with dentists who specialize in implants.

Implant fracture under dynamic fatigue loading: influence of embedded angle and depth of implant.

The purpose of this study was to investigate the relationship between implant fracture under cyclic-fatigue loading at different embedding angles, embedding depths, and loading forces. Twenty-four cylinder-type implants 3.3 mm in diameter and 10 mm in length were used. Test specimens were 30 mm(3) resin blocks with one surfaces inclined at angles of either 5°, 10°, 15° and 20° and embedded vertically with implants at depths of either 5 or 10 mm to the these surfaces. A straight abutment was connected to the implant and cut to 5 mm in length, and a hemispherical crown 5 mm in diameter and 7 mm in length was cast with a 12 % gold-silver-palladium alloy and cemented onto the abutment. Each specimen was mounted onto a fatigue loading device to apply repeated vertical loads of 294, 392, and 490 N to the coronal edge of the crown 60 times per min until reaching 100,000 cycles. For each respective specimen, we recorded the combined conditions of embedding and loading forces and the number of loading cycles until fracture, and then observed the fracture sites microscopically. The number of loading cycles until implant fracture tended to decrease in proportion to increased loading forces and embedded angles, and decreased embedded depths. Implant fracture was observed at angles of inclination over 10°. For specimens with an implant embedded at a depth of 5 mm, almost all fractures occurred at the center of the implant body; however, for those embedded at a depth of 10 mm, fractures occurred at the interface between the implant body and the abutment. These results demonstrate that implant fracture is associated with the loading axis, the amount of loading, and the embedded depth of the implant.

NRIP1 regulates cell proliferation in lung adenocarcinoma cells.

Nuclear receptor interacting protein 1 (NRIP1) is a transcription cofactor that regulates the activity of nuclear receptors and transcription factors. Functional expression of NRIP1 has been identified in multiple cancers. However, the expression and function of NRIP1 in lung adenocarcinoma have remained unclear. Thus, we aimed to clarify the NRIP1 expression and its functions in lung adenocarcinoma cells. NRIP1 and Ki-67 were immunostained in the tissue microarray section consisting of 64 lung adenocarcinoma cases, and the association of NRIP1 immunoreactivity with clinical phenotypes was examined. Survival analysis was performed in lung adenocarcinoma data from The Cancer Genome Atlas (TCGA). Human A549 lung adenocarcinoma cell line with an NRIP1-silencing technique was used in vitro study. Forty-three of 64 cases were immunostained with NRIP1. Ki-67-positive cases were more frequent in NRIP1-positive cases as opposed to NRIP1-negative cases. Higher NRIP1 mRNA expression was associated with poor prognosis in the TCGA lung adenocarcinoma data. NRIP1 was mainly located in the nucleus of A549 cells. NRIP1 silencing significantly reduced the number of living cells, suppressed cell proliferation, and induced apoptosis. These results suggest that NRIP1 participates in the progression and development of lung adenocarcinoma. Targeting NRIP1 may be a possible therapeutic strategy against lung adenocarcinoma.

Discovery of novel 5-alkynyl-4-anilinopyrimidines as potent, orally active dual inhibitors of EGFR and Her-2 tyrosine kinases.

5-Alkenyl or 5-alkynyl-4-anilinopyrimidines were prepared and evaluated for in vitro inhibition of EGFR/Her-2 kinase activity and the growth of tumor cell lines (BT474 and N87). Several of these compounds inhibited the growth of BT474 and N87 at concentrations below 200nM. Structure-activity relationship studies revealed a critical role for the 5-alkynyl moieties. The representative compound 19 exhibited significant antitumor potency in a mouse xenograft model.

Effect of firing temperature on the interface between 3Y-TZP zirconia and porcelain.

PURPOSE: The purpose of this study is to clarify the porcelain firing temperature conditions that give strongest bonding strength of porcelain to zirconia to manufacture all-ceramic fixed dental prostheses (FDPs) with excellent long-term stability. METHODS: Opaque porcelain samples (8.0 × 3.0 × 1.2 mm) were placed in the center of zirconia plates (25.0 × 3.0 × 0.5 mm) and fired at temperatures of 950°C, 1,050°C, 1,100°C, and 1,150°C. Schwickerath crack initiation tests, elemental analyses, and morphological changes of the samples were compared. RESULTS: There was no difference in the bonding strength among all the groups of porcelain fired at different temperatures. Elemental analysis of Si and O2 at the interface between the zirconia and porcelain were observed in the 950°C, 1,050°C, and 1,100°C groups. No silicon was found in the 1,150°C group by elemental analysis, and the zirconia plate where the porcelain sample was placed had irregular shape changes. CONCLUSION: It is suggested that silicon is also involved in chemical bonds due to firing at high temperatures.

(Pro)renin receptor and insulin signalling regulate cell proliferation in MCF-7 breast cancer cells.

(Pro)renin receptor [(P)RR] is related to both the renin-angiotensin system and V-ATPase with various functions including stimulation of cell proliferation. (P)RR is implicated in the pathophysiology of diabetes mellitus and cancer. Hyperinsulinemia is observed in obesity-related breast cancer. However, the relationship between (P)RR and insulin has not been clarified. We have therefore studied the effect of insulin on (P)RR expression, cell viability and AKT phosphorylation under the conditions with and without (P)RR knockdown. Effects of insulin were studied in a human breast cancer cell line, MCF-7. Cell proliferation assay was performed by WST-8 assay. (P)RR expression was suppressed by (P)RR-specific siRNAs. The treated cells were analysed by western blotting and reverse transcriptase-quantitative polymerase chain reaction analysis. Insulin stimulated proliferation of MCF-7 cells and increased (P)RR protein expression, but not (P)RR mRNA levels. Moreover, autophagy flux was suppressed by insulin. Suppression of (P)RR expression reduced cell number of MCF-7 cells and AKT phosphorylation significantly in both the presence and the absence of insulin, indicating that (P)RR is important for cell viability and AKT phosphorylation. In conclusion, insulin upregulates the level of (P)RR protein, which is important for cell viability, proliferation, AKT phosphorylation and autophagy in breast cancer cells.

Maintenance issues of elderly patients requiring nursing care with implant treatments in dental visiting: position paper.

PURPOSE: Japan, with an increasing number of elderly people needing long-term care in a super-aged society, urgent needs to develop the clinical guidelines on implant maintenance for elderly people with declining independence. The purpose is to categorize the troubles encountered in the care of patients with dental implants and to indicate actual practices and points of note. METHODS: From the members of the Japanese Society of Oral Implantology, 12 expert panelists who were experienced with many problems of implant maintenance during dental visits and were familiar with their solutions were selected. Through repeated discussions in the many panel meetings, the problems of implant maintenance during dental visits were distilled. RESULTS: During a dental visit, the oral cavity, general conditions, and background of elderly patients who cannot orally care for themselves must be grasped, and medical staff, care managers, and patients should understand the changes in these factors as time goes by. The solutions and responses that can be made differ greatly depending on the medical care facilities, the environment, differences in the experience of medical staff, and the patient's background. Thus, it is necessary to select safe treatments appropriate to each situation. CONCLUSIONS: This paper features many opinions based on clinical experiences. However, clinical guidelines on implant management during dental visits should be formulated in the future based on the accumulation of evidence through the implementation of clinical research.

Synthesis and evaluation of novel pyrimidine-based dual EGFR/Her-2 inhibitors.

A structure-activity relationship study of 4-anilinopyrimidines for dual EGFR/Her-2 inhibitor has resulted in the identification of 4-anilino-5-alkenyl or 5-alkynyl-6-methylpyrimidine derivatives that have exhibited effective inhibitory activity against both enzymes. The presence of 5-alkenyl or 5-alkynyl moiety bearing terminal hydrophilic group played important role for inhibition of these enzymes. Selected compounds in the series demonstrated some activity against Her-2 dependent cell line (BT474).

Comparison of diameters at the cementoenamel junction between South Asians and Japanese.

Previously, sex differences among the various tooth types in Japanese skulls were examined to facilitate choosing an implant diameter similar to the cervical diameter of each tooth, and it was found that mesiodistal diameters at the cementoenamel junction were narrower in women than in men. Also interesting and relevant to the selection of implant diameter is the possible existence of racial differences in diameters at the cementoenamel junction. The purpose of this research was to test the hypothesis that the diameter at the cementoenamel junction of the tooth differs in humans of different races. We compared 106 skulls of unknown sex collected from South Asia with the skulls of Japanese women. Our conclusions are as follows: (1) Except for the lower canine, no significant racial differences were found in the labiolingual diameter of any teeth. (2) Except for the upper canine, upper central incisor, lower second premolar, and lower first premolar, a significant racial difference was found in the mesiodistal diameter. In all teeth in which this value differed, the mesiodistal diameters of South Asians were narrower than those of Japanese women, except for the lower canine. (3) The labiolingual and mesiodistal diameters of the lower canine were significantly larger in South Asians than in Japanese women. (4) Among South Asians, no significant left/right differences were found in the diameter at the cementoenamel junction of any tooth.

Antibacterial activity of blue high-power light-emitting diode-activated flavin mononucleotide against Staphylococcus aureus biofilm on a sandblasted and etched surface.

BACKGROUND: Because of high affinity to the titanium implant surface, Staphylococcus aureus (S. aureus) has been reported as key microorganism that cause the peri-implantitis, even though it is not the typical periodontal pathogenic bacterial strain. The aim of this study was to evaluate the antibacterial property of the aPDT device, using blue high-power LED light activated flavin mononucleotide, comparing to the previously proven aPDT method using methylene blue and red laser on S. aureus biofilm. METHODS: Commercial pure titanium grade 4 modified surface with SLA were used to form S. aureus biofilm for 48 h. Two aPDT systems were used in this study; 1) HELBO®Blue Photosensitizer (Bredent medical), which is methylene blue (MB) activated by 670-nm red diode laser and 2) FotoSan® Blue agent Gel (CMS Dental), which contains flavin mononucleotide (FMN) activated by FotoSan® BLUE LAD (Light Activated Disinfection) light. The antibacterial tests were performed by total viable count, crystal violet assay, and direct observation methods. RESULTS: Using the light activated-PS, the log reduction in CFU/mL compared to non-treatment was 1.23 ±â€¯0.19 log10 and 1.23 ±â€¯0.12 log10 (about 93 % of reduction) for MB and FMN, respectively. The significant difference in the reduction could be determined when comparing with using only light (p < 0.01). Regarding two aPDT systems, the decrease in amount of bacteria after treatment was not significantly different (p > 0.05). CONCLUSION: The antibacterial activities of aPDT using blue high-power LED light activated flavin mononucleotide on S. aureus biofilm was comparable to those of previous research supporting aPDT using photoactivated MB.

Marginal and internal fit of three-unit zirconia fixed dental prostheses: Effects of prosthesis design, cement space, and zirconia type.

PURPOSE: The purpose of this study was to compare the marginal and internal fit of three-unit fixed dental prostheses (FDPs) fabricated using CAD/CAM with two designs, two cement space (CS), and two zirconia types. METHODS: A master model with two zirconia abutments and a missing tooth was scanned with an intraoral scanner. FDPs were fabricated with two designs (Full contour: FC, Framework: FW), two zirconia types (multi-layer: L, single-layer: W), and two CS values (30 and 45 µm for L and 30 µm for W). There were six experimental groups. The fit of the FDPs was evaluated using the replica method. The space between an abutment and the FDPs in the marginal (MO), chamfer (CH), axial (AX), and occlusal (OC) areas was measured under an optical microscope and the data was statistically analyzed using three-way ANOVA and Bonferroni test (p < 0.05). RESULTS: FW-l-45 µm showed a significantly smaller space than those for the FC in MO (p = 0.011), CH (p = 0.001) and AXE (p = 0.003). FW-l-30 µm showed a significantly smaller space than that for the 45 µm in AXE (p = 0.000) and OC (p = 0.016). FW-W-30 µm showed a significantly smaller space than that for the L in MO (p = 0.000), CH (p = 0.000), AXE (p = 0.000), and OC (p = 0.002). CONCLUSIONS: The design and CS of the FDPs affected the fit. FDPs with single-layer zirconia showed better fit than that obtained with multi-layer zirconia.

The Antibacterial Activity of Hydroxyapatite-Tryptophan Complex with Gray Titania by Photocatalysis Using LED Diodes.

PURPOSE: Peri-implantitis is an important biologic complication that can lead to implant failure. Proper treatment should effectively kill bacteria, not harm the implant surface, and promote regeneration. Recently, photocatalytic coating without antibiotics or external agents was proposed to be an alternative to antibiotic therapy. The aim of this study was to evaluate the photocatalytic antibacterial effect of a new titanium implant coating made from hydroxyapatite-tryptophan complex and gray titania, which was activated by two visible lights. MATERIALS AND METHODS: Titanium alloy substrate was plasma sprayed with hydroxyapatite (80 wt%) and dititanium trioxide (20 wt%) and then pressed with tryptophan. Three bacteria related to peri-implantitis, Porphyromonas gingivalis, Tannerella forsythia, and Aggregatibacter actinomycetemcomitans, were used in this study. Six conditions were tested: (1) control group (only bacteria), (2) photocatalytic sample in darkness (bacteria and coated sample in darkness), (3) red laser for 15 minutes (bacteria irradiated with photoactivated disinfection [PAD] light, 650-nm wavelength), (4) broadband light-emitting diode (LED) for 15 minutes (bacteria irradiated with broadband LED, peak wavelength at 470 nm), (5) photocatalysis by red laser for 15 minutes (bacteria and coated sample irradiated with PAD light), and (6) photocatalysis by broadband LED for 15 minutes (bacteria and coated sample irradiated with broadband LED). After 15 minutes of irradiation, photocatalytic antibacterial effects were evaluated by total viable bacterial count, adenosine triphosphate (ATP) assay, and LIVE/DEAD assay. RESULTS: The number of all bacteria tested was significantly decreased by the photocatalytic effect of both visible light sources (P < .05). For P gingivalis, viable bacteria of lethal photosensitization groups were also significantly decreased (P < .05), especially when using the broadband LED. However, the coating material itself did not have antibacterial properties without light activation. There was no significant difference in ATP among groups (P > .05). LIVE/DEAD staining showed that red fluorescent bacterial cells were present in photocatalytic groups from the two light sources. CONCLUSION: Photoactivated hydroxyapatite-tryptophan complex and gray titania as a photocatalytic coating has antibacterial effects on bacteria associated with peri-implantitis.

Influence of the difference between implant body and screw materials on abutment screw loosening.

The purpose of this study was to investigate how differences in dental implant and screw materials affected screw loosening. Screws (pure titanium; Ti4S, titanium alloy; TiAS), blocks (Y-TZP; ZrB, pure titanium; Ti4B) and plates (Y-TZP; ZrP), representing abutment screws, implant bodies and superstructures, respectably, were used. Plates were fastened to blocks by screws using a torque of 20 N•cm, and the loosening torque was measured after cyclic loading. Tests was performed on 13 specimens per group, with four groups for loading at the eccentric point (9 mm from screw center) and one group at the centric point (3 mm from screw center). In eccentric point tests, Ti4S screws led to significantly more loosening than TiAS screws (p<0.01). The block material had no effect. For ZrBTi4S, there was no difference in loosening before and after the centric point tests. More loosening occurred for eccentric point than for centric point tests (p<0.05).