Ageing well with diabetes: A workshop to co-design research recommendations for improving the diabetes care of older people.

AIMS: To identify key research questions where answers could improve care for older people living with diabetes (PLWD), and provide detailed recommendations for researchers and research funders on how best to address them. METHODS: A series of online research workshops were conducted, bringing together a range of PLWD and an acknowledged group of academic and clinical experts in their diabetes care to identify areas for future research. Throughout the pre-workshop phase, during each workshop, and in manuscript preparation and editing, PLWD played an active and dynamic role in discussions as part of both an iterative and narrative process. RESULTS: The following key questions in this field were identified, and research recommendations for each were developed: How can we improve our understanding of the characteristics of older people living with diabetes (PLWD) and their outcomes, and can this deliver better person-centred care? How are services to care for older PLWD currently delivered, both for their diabetes and other conditions? How can we optimise and streamline the process and ensure everyone gets the best care, tailored to their individual needs? What tools might be used to evaluate the level of understanding of diabetes in the older population amongst non-specialist Healthcare Professionals (HCPs)? How can virtual experts or centres most effectively provide access to specialist multi-disciplinary team (MDT) expertise for older PLWD and the HCPs caring for them? Is a combination of exercise and a nutrition-dense, high protein diet effective in the prevention of the adverse effects of type 2 diabetes and deterioration in frailty, and how might this be delivered in a way which is acceptable to people with type 2 diabetes? How might we best use continuous glucose monitoring (CGM) in older people and, for those who require support, how should the data be shared? How can older PLWD be better empowered to manage their diabetes in their own home, particularly when living with additional long-term conditions? What are the benefits of models of peer support for older PLWD, both when living independently and when in care? CONCLUSIONS: This paper outlines recommendations supported by PLWD through which new research could improve their diabetes care and calls on the research community and funders to address them in future research programmes and strategies.

Towards passive bioremediation of dye-bearing effluents using hydrous ferric oxide wastes: Mechanisms, products and microbiology.

A novel, circular economy-inspired approach for the "passive" (non-powered and reagent-free) treatment of dye-bearing effluent is presented. The treatment utilises the biogeochemical interaction of dye-bearing wastewater with hydrous ferric oxide (HFO) bearing sludges. The work presented demonstrates for the first time the reuse of HFO-rich waste sludges from potable water and mine water treatment. The waste was used directly without modification or reagent addition, as media/substrate in simple flow-through reactors for the decolourisation and biodegradation of methyl orange (MO) and mixed dyes textile effluent. Three phases of exploratory proof of concept work were undertaken. Columns containing HFO sludges were challenged with solution of MO, and MO amended with glycerol (Phase I), MO in a synthetic textile effluent recipe (Phase II), and real mixed textile effluent containing a mixture of dyes (Phase III). After an initial lag period extensive decolourisation of dye was observed in all cases at rates comparable with pure strains and engineered bioreactor processes, with evidence of biodegradation beyond simple cleavage of the mono azo chromophore and mineralisation. The microbiology of the initial sludge samples in both cases exhibited a diverse range of iron oxidising and reducing bacteria. However, post experiment the microbiology of sludge evolved from being dominated by Proteobacteria to being dominated by Firmicutes. Distinct changes in the microbial community structure were observed in post-treatment MWTS and WTWS where genera capable of iron and sulphate reduction and/or aromatic amine degradation were identified. Average nitrogen removal rates for the columns ranged from 27.8 to 194 g/m3/day which is higher than engineered sequential anaerobic-aerobic bioreactor. Postulated mechanisms for the fast anaerobic decolourisation, biodegradation, and mineralisation of the dyes (as well nitrogen transformations) include various direct and indirect enzymatic and metabolic reactions, as well as reductive attack by continuously regenerated reductants such as Fe(II), HFO bound Fe(II), FeS, and HS-. The ability of iron reducers to degrade aromatic rings is also considered important in the further biodegradation and complete mineralisation of organic carbon. The study reveals that abundant and ubiquitous HFO-rich waste sludges, can be used without amendment, as a substrate in simple flow-through bioremediation system for the decolourisation and partial biodegradation of dyes in textile effluent.

Impaired skeletal muscle fatigue resistance during cardiac hypertrophy is prevented by functional overload- or exercise-induced functional capillarity.

KEY POINTS: Capillary rarefaction is hypothesized to contribute to impaired exercise tolerance in cardiovascular disease, but it remains a poorly exploited therapeutic target for improving skeletal muscle performance. Using an abdominal aortic coarctation rat model of compensatory cardiac hypertrophy, we determine the efficacy of aerobic exercise for the prevention of, and mechanical overload for, restoration of hindlimb muscle fatigue resistance and microvascular impairment in the early stages of heart disease. Impaired muscle fatigue resistance was found after development of cardiac hypertrophy, but this impairment was prevented by low-intensity aerobic exercise and recovered after mechanical stretch due to muscle overload. Changes in muscle fatigue resistance were closely related to functional (i.e. perfused) microvascular density, independent of arterial blood flow, emphasizing the critical importance of optimal capillary diffusion for skeletal muscle function. Pro-angiogenic therapies are an important tool for improving skeletal muscle function in the incipient stages of heart disease. ABSTRACT: Microvascular rarefaction may contribute to declining skeletal muscle performance in cardiac and vascular diseases. It remains uncertain to what extent microvascular rarefaction occurs in the earliest stages of these conditions, if impaired blood flow is an aggravating factor and whether angiogenesis restores muscle performance. To investigate this, the effects of aerobic exercise (voluntary wheel running) and functional muscle overload on the performance, femoral blood flow (FBF) and microvascular perfusion of the extensor digitorum longus (EDL) were determined in a chronic rat model of compensatory cardiac hypertrophy (CCH, induced by surgically imposed abdominal aortic coarctation). CCH was associated with hypertension (P = 0.001 vs. Control) and increased relative heart mass (P < 0.001). Immediately upon placing the aortic band (i.e. before development of CCH), post-fatigue test FBF was reduced (P < 0.003), coinciding with attenuated fatigue resistance (P = 0.039) indicating an acute arterial perfusion constraint on muscle performance. While FBF was normalized during CCH in chronic groups (P > 0.05) fatigue resistance remained reduced (P = 0.039) and was associated with reduced (P = 0.009) functional capillarity after development of CCH without intervention, indicating a microvascular limitation to muscle performance. Normalization of functional capillarity after aerobic exercise (P = 0.065) and overload (P = 0.329) in CCH coincided with restoration to control levels of muscle fatigue resistance (P > 0.999), although overload-induced EDL hypertrophy (P = 0.027) and wheel-running velocity and duration (both P < 0.05) were attenuated after aortic banding. These data show that reductions in skeletal muscle performance during CCH can be countered by improving functional capillarity, providing a therapeutic target to improve skeletal muscle function in chronic diseases.

Sensorimotor delays in tracking may be compensated by negative feedback control of motion-extrapolated position.

Sensorimotor delays dictate that humans act on outdated perceptual information. As a result, continuous manual tracking of an unpredictable target incurs significant response delays. However, no such delays are observed for repeating targets such as the sinusoids. Findings of this kind have led researchers to claim that the nervous system constructs predictive, probabilistic models of the world. However, a more parsimonious explanation is that visual perception of a moving target position is systematically biased by its velocity. The resultant extrapolated position could be compared with the cursor position and the difference canceled by negative feedback control, compensating sensorimotor delays. The current study tested whether a position extrapolation model fit human tracking of sinusoid (predictable) and pseudorandom (less predictable) targets better than the non-biased position control model, Twenty-eight participants tracked these targets and the two computational models were fit to the data at 60 fixed loop delay values (simulating sensorimotor delays). We observed that pseudorandom targets were tracked with a significantly greater phase delay than sinusoid targets. For sinusoid targets, the position extrapolation model simulated tracking results more accurately for loop delays longer than 120 ms, thereby confirming its ability to compensate for sensorimotor delays. However, for pseudorandom targets, this advantage arose only after 300 ms, indicating that velocity information is unlikely to be exploited in this way during the tracking of less predictable targets. We conclude that negative feedback control of position is a parsimonious model for tracking pseudorandom targets and that negative feedback control of extrapolated position is a parsimonious model for tracking sinusoidal targets.

Monitoring of Dynamic Plantar Foot Temperatures in Diabetes with Personalised 3D-Printed Wearables.

Diabetic foot ulcers (DFUs) are a life-changing complication of diabetes that can lead to amputation. There is increasing evidence that long-term management with wearables can reduce incidence and recurrence of this condition. Temperature asymmetry measurements can alert to DFU development, but measurements of dynamic information, such as rate of temperature change, are under investigated. We present a new wearable device for temperature monitoring at the foot that is personalised to account for anatomical variations at the foot. We validate this device on 13 participants with diabetes (no neuropathy) (group name D) and 12 control participants (group name C), during sitting and standing. We extract dynamic temperature parameters from four sites on each foot to compare the rate of temperature change. During sitting the time constant of temperature rise after shoe donning was significantly (p < 0.05) faster at the hallux (p = 0.032, 370.4 s (C), 279.1 s (D)) and 5th metatarsal head (p = 0.011, 481.9 s (C), 356.6 s (D)) in participants with diabetes compared to controls. No significant differences at the other sites or during standing were identified. These results suggest that temperature rise time is faster at parts of the foot in those who have developed diabetes. Elevated temperatures are known to be a risk factor of DFUs and measurement of time constants may provide information on their development. This work suggests that temperature rise time measured at the plantar surface may be an indicative biomarker for differences in soft tissue biomechanics and vascularisation during diabetes onset and progression.

A pilot single-blind multicentre randomized controlled trial to evaluate the potential benefits of computer-assisted arm rehabilitation gaming technology on the arm function of children with spastic cerebral palsy.

OBJECTIVE: To evaluate the potential benefits of computer-assisted arm rehabilitation gaming technology on arm function of children with spastic cerebral palsy. DESIGN: A single-blind randomized controlled trial design. Power calculations indicated that 58 children would be required to demonstrate a clinically important difference. SETTING: Intervention was home-based; recruitment took place in regional spasticity clinics. PARTICIPANTS: A total of 15 children with cerebral palsy aged five to 12 years were recruited; eight to the device group. INTERVENTIONS: Both study groups received 'usual follow-up treatment' following spasticity treatment with botulinum toxin; the intervention group also received a rehabilitation gaming device. MAIN MEASURES: ABILHAND-kids and Canadian Occupational Performance Measure were performed by blinded assessors at baseline, six and 12 weeks. RESULTS: An analysis of covariance showed no group differences in mean ABILHAND-kids scores between time points. A non-parametric analysis of variance on Canadian Occupational Performance Measure scores showed a statistically significant improvement across time points (χ2 (2,15) = 6.778, p = 0.031), but this improvement did not reach minimal clinically important difference. Mean daily device use was seven minutes. Recruitment did not reach target owing to unanticipated staff shortages in clinical services. Feedback from children and their families indicated that the games were not sufficiently engaging to promote sufficient use that was likely to result in functional benefits. CONCLUSION: This study suggests that computer-assisted arm rehabilitation gaming does not benefit arm function, but a Type II error cannot be ruled out.

The effect of anthropogenic arsenic contamination on the earthworm microbiome.

Earthworms are globally distributed and perform essential roles for soil health and microbial structure. We have investigated the effect of an anthropogenic contamination gradient on the bacterial community of the keystone ecological species Lumbricus rubellus through utilizing 16S rRNA pyrosequencing for the first time to establish the microbiome of the host and surrounding soil. The earthworm-associated microbiome differs from the surrounding environment which appears to be a result of both filtering and stimulation likely linked to the altered environment associated with the gut micro-habitat (neutral pH, anoxia and increased carbon substrates). We identified a core earthworm community comprising Proteobacteria (∼50%) and Actinobacteria (∼30%), with lower abundances of Bacteroidetes (∼6%) and Acidobacteria (∼3%). In addition to the known earthworm symbiont (Verminephrobacter sp.), we identified a potential host-associated Gammaproteobacteria species (Serratia sp.) that was absent from soil yet observed in most earthworms. Although a distinct bacterial community defines these earthworms, clear family- and species-level modification were observed along an arsenic and iron contamination gradient. Several taxa observed in uncontaminated control microbiomes are suppressed by metal/metalloid field exposure, including eradication of the hereto ubiquitously associated Verminephrobacter symbiont, which raises implications to its functional role in the earthworm microbiome.

Arabidopsis thaliana and Pisum sativum models demonstrate that root colonization is an intrinsic trait of Burkholderia cepacia complex bacteria.

Burkholderia cepacia complex (Bcc) bacteria possess biotechnologically useful properties that contrast with their opportunistic pathogenicity. The rhizosphere fitness of Bcc bacteria is central to their biocontrol and bioremediation activities. However, it is not known whether this differs between species or between environmental and clinical strains. We investigated the ability of 26 Bcc strains representing nine different species to colonize the roots of Arabidopsis thaliana and Pisum sativum (pea). Viable counts, scanning electron microscopy and bioluminescence imaging were used to assess root colonization, with Bcc bacteria achieving mean (±sem) levels of 2.49±0.23×10(6) and 5.16±1.87×10(6) c.f.u. per centimetre of root on the A. thaliana and P. sativum models, respectively. The A. thaliana rhizocompetence model was able to reveal loss of colonization phenotypes in Burkholderia vietnamiensis G4 transposon mutants that had only previously been observed in competition experiments on the P. sativum model. Different Bcc species colonized each plant model at different rates, and no statistical difference in root colonization was observed between isolates of clinical or environmental origin. Loss of the virulence-associated third chromosomal replicon (>1 Mb DNA) did not alter Bcc root colonization on A. thaliana. In summary, Bcc bacteria possess intrinsic root colonization abilities irrespective of their species or source. As Bcc rhizocompetence does not require their third chromosomal replicon, the possibility of using synthetic biology approaches to engineer virulence-attenuated biotechnological strains is tractable.

Microbial community and antimicrobial resistance niche differentiation in a multistage, surface flow constructed wetland.

Free-living (FL) and particulate-associated (PA) communities are distinct bacterioplankton lifestyles with different mobility and dissemination routes. Understanding spatio-temporal dynamics of PA and FL fractions will allow improvement to wastewater treatment processes including pathogen and AMR bacteria removal. In this study, PA, FL and sediment community composition and antimicrobial resistance gene (ARG; tetW, ermB, sul1, intI1) dynamics were investigated in a full-scale municipal wastewater free-water surface polishing constructed wetland. Taxonomic composition of PA and FL microbial communities shifted towards less diverse communities (Shannon, Chao1) at the CW effluent but retained a distinct fraction-specific composition. Wastewater treatment plant derived PA communities introduced the bulk of AMR load (70 %) into the CW. However, the FL fraction was responsible for exporting over 60 % of the effluent AMR load given its high mobility and the effective immobilization (1-3 log removal) of PA communities. Strong correlations (r2>0.8, p < 0.05) were observed between the FL fraction, tetW and emrB dynamics, and amplicon sequence variants (ASVs) of potentially pathogenic taxa, including Bacteroides, Enterobacteriaceae, Aeromonadaceae, and Lachnospiraceae. This study reveals niche differentiation of microbial communities and associated AMR in CWs and shows that free-living bacteria are a primary escape route of pathogenic and ARG load from CWs under low-flow hydraulic conditions.

The effect of calcaneus and metatarsal head offloading insoles on healthy subjects' gait kinematics, kinetics, asymmetry, and the implications for plantar pressure management: A pilot study.

BACKGROUND: The global number of people with diabetes is estimated to reach 643 million by 2030 of whom 19-34% will present with diabetic foot ulceration. Insoles which offload high-risk ulcerative regions on the foot, by removing insole material, are the main contemporary conservative treatment to maintain mobility and reduce the likelihood of ulceration. However, their effect on the rest of the foot and relationship with key gait propulsive and balance kinematics and kinetics has not been well researched. PURPOSE: The aim of this study is to investigate the effect of offloading insoles on gait kinematics, kinetics, and plantar pressure throughout the gait cycle. METHODS: 10 healthy subjects were recruited for this experiment to walk in 6 different insole conditions. Subjects walked at three speeds on a treadmill for 10 minutes while both plantar pressure and gait kinematics, kinetics were measured using an in-shoe pressure measurement insole and motion capture system/force plates. Average peak plantar pressure, pressure time integrals, gait kinematics and centre of force were analysed. RESULTS: The average peak plantar pressure and pressure time integrals changed by -30% (-68% to 3%) and -36% (-75% to -1%) at the region of interest when applying offloading insoles, whereas the heel strike and toe-off velocity changed by 15% (-6% to 32%) and 12% (-2% to 19%) whilst walking at three speeds. CONCLUSION: The study found that offloading insoles reduced plantar pressure in the region of interest with loading transferred to surrounding regions increasing the risk of higher pressure time integrals in these locations. Heel strike and toe-off velocities were increased under certain configurations of offloading insoles which may explain the higher plantar pressures and supporting the potential of integrating kinematic gait variables within a more optimal therapeutic approach. However, there was inter-individual variability in responses for all variables measured supporting individualised prescription.

The potential of construction robotics to reduce airborne virus transmission in the construction industry in the UK and China.

This paper aims to identify construction robotics' potential to reduce airborne virus transmission, review factors limiting the technology's adoption and highlight how similar barriers have been addressed in other industries. Construction robotics were identified and classified into 8 themes with 25 categories through a critical literature review. We undertook interviews with 4 construction contractors and conducted an online questionnaire with 32 experts from the UK (n=14) and China (n=18) who reviewed the robotic systems we identified and ranked the potential ability of each to reduce airborne virus transmission within the construction industry. The results of this study showed that construction robotics is not only beneficial to reduce airborne virus transmission, but may also help to reduce the spread of future contagious viruses. We found no significant difference (P>0.05) in practical usage and implementation barriers to construction robotics between the UK and China. Cost, training and limited awareness of robotic technologies were the main implementation barriers we identified in both countries. Both the UK and China may need to adopt strategies such as providing more financial support to small construction industries and skill training which are utilised successfully in other sectors to realise the potential of construction robotic technologies.

Increasing the precision of simulated percutaneous dilatational tracheostomy-a pilot prototype device development study.

Percutaneous dilatational tracheostomy (PDT) is a bedside medical procedure which sites a new tracheostomy tube in the front of the neck. The critical first step is accurate placement of a needle through the neck tissues into the trachea. Misplacement occurs in around 5% of insertions, causing morbidity, mortality, and delays to recovery. We aimed to develop and evaluate a prototype medical device to improve precision of initial PDT-needle insertion. The Guidance for Tracheostomy (GiFT) system communicates the relative locations of intra-tracheal target sensor and PDT-needle sensor to the operator. In simulated "difficult neck" models, GiFT significantly improved accuracy (mean difference 10.0 mm, ANOVA p < 0.001) with ten untrained laboratory-based participants and ten experienced medical participants. GiFT resulted in slower time-to-target (mean difference 56.1 s, p < 0.001) than unguided attempts, considered clinically insignificant. Our proof-of-concept study highlights GiFT's potential to significantly improve PDT accuracy, reduce procedural complications and offer bedside PDT to more patients.

Simultaneous detection and characterization of common respiratory pathogens in wastewater through genomic sequencing.

Genomic surveillance of SARS-CoV-2 has given insight into the evolution and epidemiology of the virus and its variant lineages during the COVID-19 pandemic. Expanding this approach to include a range of respiratory pathogens can better inform public health preparedness for potential outbreaks and epidemics. Here, we simultaneously sequenced 38 pathogens including influenza viruses, coronaviruses and bocaviruses, to examine the abundance and seasonality of respiratory pathogens in urban wastewater. We deployed a targeted bait capture method and short-read sequencing (Illumina Respiratory Virus Oligos Panel; RVOP) on composite wastewater samples from 8 wastewater treatment plants (WWTPs) and one associated hospital site. By combining seasonal sampling with whole genome sequencing, we were able to concurrently detect and characterise a range of common respiratory pathogens, including SARS-CoV-2, adenovirus and parainfluenza virus. We demonstrated that 38 respiratory pathogens can be detected at low abundances year-round, that hospital pathogen diversity is higher in winter vs. summer sampling events, and that significantly more viruses are detected in raw influent compared to treated effluent samples. Finally, we compared detection sensitivity of RT-qPCR vs. next generation sequencing for SARS-CoV-2, enteroviruses, influenza A/B, and respiratory syncytial viruses. We conclude that both should be used in combination; RT-qPCR allowed accurate quantification, whilst genomic sequencing detected pathogens at lower abundance. We demonstrate the valuable role of wastewater genomic surveillance and its contribution to the field of wastewater-based epidemiology, gaining rapid understanding of the seasonal presence and persistence for common respiratory pathogens. By simultaneously monitoring seasonal trends and early warning signs of many viruses circulating in communities, public health agencies can implement targeted prevention and rapid response plans.

In Vitro Evaluation of Pore Size Graded Bone Scaffolds with Different Material Composition.

The demand for biomimetic and biocompatible scaffolds in equivalence of structure and material composition for the regeneration of bone tissue is relevantly high. This article is investigating a novel three-dimensional (3D) printed porous structure called bone bricks with a gradient pore size mimicking the structure of the bone tissue. Poly-ɛ-caprolactone (PCL) combined with ceramics such as hydroxyapatite (HA), ß-tricalcium phosphate (TCP), and bioglass 45S5 were successfully mixed using a melt blending method and fabricated with the use of screw-assisted extrusion-based additive manufacturing system. Bone bricks containing the same material concentration (20 wt%) were biologically characterized through proliferation and differentiation tests. Scanning electron microscopy (SEM) was used to investigate the morphology of cells on the surface of bone bricks, whereas energy dispersive X-ray (EDX) spectroscopy was used to investigate the element composition on the surface of the bone bricks. Confocal imaging was used to investigate the number of differentiated cells on the surface of bone bricks. Proliferation results showed that bone bricks containing PCL/HA content are presenting higher proliferation properties, whereas differentiation results showed that bone bricks containing PCL/Bioglass 45S5 are presenting higher differentiation properties. Confocal imaging results showed that bone bricks containing PCL/Bioglass 45S5 are presenting a higher number of differentiated cells on their surface compared with the other material contents.

Examining the stability of viral RNA and DNA in wastewater: Effects of storage time, temperature, and freeze-thaw cycles.

Wastewater-based epidemiology (WBE) has been demonstrably successful as a relatively unbiased tool for monitoring levels of SARS-CoV-2 virus circulating in communities during the COVID-19 pandemic. Accumulated biobanks of wastewater samples allow retrospective exploration of spatial and temporal trends for public health indicators such as chemicals, viruses, antimicrobial resistance genes, and the possible emergence of novel human or zoonotic pathogens. We investigated virus resilience to time, temperature, and freeze-thaw cycles, plus the optimal storage conditions to maintain the stability of genetic material (RNA/DNA) of viral +ssRNA (Envelope - E, Nucleocapsid - N and Spike protein - S genes of SARS-CoV-2), dsRNA (Phi6 phage) and circular dsDNA (crAssphage) in wastewater. Samples consisted of (i) processed and extracted wastewater samples, (ii) processed and extracted distilled water samples, and (iii) raw, unprocessed wastewater samples. Samples were stored at -80 °C, -20 °C, 4 °C, or 20 °C for 10 days, going through up to 10 freeze-thaw cycles (once per day). Sample stability was measured using reverse transcription quantitative PCR, quantitative PCR, automated electrophoresis, and short-read whole genome sequencing. Exploring different areas of the SARS-CoV-2 genome demonstrated that the S gene in processed and extracted samples showed greater sensitivity to freeze-thaw cycles than the E or N genes. Investigating surrogate and normalisation viruses showed that Phi6 remains a stable comparison for SARS-CoV-2 in a laboratory setting and crAssphage was relatively resilient to temperature variation. Recovery of SARS-CoV-2 in raw unprocessed samples was significantly greater when stored at 4 °C, which was supported by the sequencing data for all viruses - both time and freeze-thaw cycles negatively impacted sequencing metrics. Historical extracts stored at -80 °C that were re-quantified 12, 14 and 16 months after original quantification showed no major changes. This study highlights the importance of the fast processing and extraction of wastewater samples, following which viruses are relatively robust to storage at a range of temperatures.

Cross-continental comparative experiences of wastewater surveillance and a vision for the 21st century.

The COVID-19 pandemic has brought the epidemiological value of monitoring wastewater into sharp focus. The challenges of implementing and optimising wastewater monitoring vary significantly from one region to another, often due to the array of different wastewater systems around the globe, as well as the availability of resources to undertake the required analyses (e.g. laboratory infrastructure and expertise). Here we reflect on the local and shared challenges of implementing a SARS-CoV-2 monitoring programme in two geographically and socio-economically distinct regions, São Paulo state (Brazil) and Wales (UK), focusing on design, laboratory methods and data analysis, and identifying potential guiding principles for wastewater surveillance fit for the 21st century. Our results highlight the historical nature of region-specific challenges to the implementation of wastewater surveillance, including previous experience of using wastewater surveillance, stakeholders involved, and nature of wastewater infrastructure. Building on those challenges, we then highlight what an ideal programme would look like if restrictions such as resource were not a constraint. Finally, we demonstrate the value of bringing multidisciplinary skills and international networks together for effective wastewater surveillance.

Comparative assessment of Nanotrap and polyethylene glycol-based virus concentration in wastewater samples.

Wastewater-based epidemiology is now widely used in many countries for the routine monitoring of SARS-CoV-2 and other viruses at a community level. However, efficient sample processing technologies are still under investigation. In this study, we compared the performance of the novel Nanotrap® Microbiome Particles (NMP) concentration method to the commonly used polyethylene glycol (PEG) precipitation method for concentrating viruses from wastewater and their subsequent quantification and sequencing. For this, we first spiked wastewater with SARS-CoV-2, influenza and measles viruses and norovirus and found that the NMP method recovered 0.4%-21% of them depending on virus type, providing consistent and reproducible results. Using the NMP and PEG methods, we monitored SARS-CoV-2, influenza A and B viruses, RSV, enteroviruses and norovirus GI and GII and crAssphage in wastewater using quantitative PCR (qPCR)-based methods and next-generation sequencing. Good viral recoveries were observed for highly abundant viruses using both methods; however, PEG precipitation was more successful in the recovery of low-abundance viruses present in wastewater. Furthermore, samples processed with PEG precipitation were more successfully sequenced for SARS-CoV-2 than those processed with the NMP method. Virus recoveries were enhanced by high sample volumes when PEG precipitation was applied. Overall, our results suggest that the NMP concentration method is a rapid and easy virus concentration method for viral targets that are abundant in wastewater, whereas PEG precipitation may be more suited to the recovery and analysis of low-abundance viruses and for next generation sequencing.

Biostimulation of jarosite and iron oxide-bearing mine waste enhances subsequent metal recovery.

Novel resource recovery technologies are required for metals-bearing hazardous wastes in order to achieve circular economy outcomes and industrial symbiosis. Iron oxide and co-occurring hydroxysulphate-bearing wastes are globally abundant and often contain other elements of value. This work addresses the biostimulation of indigenous microbial communities within an iron oxide/ hydroxysulphate-bearing waste and its effect on the subsequent recoverability of metals by hydrochloric, sulphuric, citric acids, and EDTA. Laboratory-scale flow-through column reactors were used to examine the effect of using glycerol (10% w/w) to stimulate the in situ microbial community in an iron oxide/ hydroxysulphate-bearing mine waste. The effects on the evolution of leachate chemistry, changes in microbiological community, and subsequent hydrometallurgical extractability of metals were studied. Results demonstrated increased leachability and selectivity of Pb, Cu, and Zn relative to iron after biostimulation with a total of 0.027 kg of glycerol per kg of waste. Biostimulation, which can be readily applied in situ, potentially opens new routes to metal recovery from globally abundant waste streams that contain jarosite and iron oxides.

Microplastic biofilm, associated pathogen and antimicrobial resistance dynamics through a wastewater treatment process incorporating a constructed wetland.

Microplastics in wastewater are colonized by biofilms containing pathogens and antimicrobial resistance (AMR) genes that can be exported into receiving water bodies. This study investigated establishment and changes in microplastic-associated biofilm and AMR during a conventional full-scale 2100 population equivalent wastewater treatment process combined with a free water surface polishing constructed wetland. Sequential microplastic colonization experiments were conducted at different stages of the wastewater treatment process, including in raw sewage, treated effluent and the constructed wetland. Two scenarios were tested in which the constructed wetland served as either (i) a polishing step or (ii) as primary recipient of sewage inoculated microplastics. Bacterial 16S rRNA gene sequencing was carried out for qualitative bacterial community analysis. qPCR was applied for quantitative analysis of AMR genes (sul1, ermB, tetW, intiI1), bacterial biomass (16S rRNA) and a human fecal marker (HF183). Microbial diversity on microplastics increased with incubation time. The initial sewage-derived biofilm composition changed more significantly in the wastewater effluent compared to the constructed wetland. Pathogen and AMR load decreased by up to two orders of magnitude after coupled conventional and constructed wetland treatment, while less impact was observed when sewage-inoculated microplastic material was directly transferred into the constructed wetland. Aeromonas, Klebsiella, and Streptococcus were key pathogenic genera correlated with AMR in microplastic-associated biofilms. Despite decreasing trends on human pathogens and AMR load along the treatment process, microplastic-associated biofilms were a considerable potential hotspot for AMR (intI1 gene) and accommodated Cyanobacteria and fish pathogens.

Poor air passenger knowledge of COVID-19 symptoms and behaviour undermines strategies aimed at preventing the import of SARS-CoV-2 into the UK.

Air travel mediates transboundary movement of SARS-CoV-2. To prepare for future pandemics, we sought to understand air passenger behaviour and perceived risk during the COVID-19 pandemic. This study of UK adults (n = 2103) quantified knowledge of COVID-19 symptoms, perceived health risk of contracting COVID-19, likelihood of returning to the UK with COVID-19 symptoms, likelihood to obey self-quarantining guidelines, how safe air travellers felt when flying during the pandemic (n = 305), and perceptions towards face covering effectiveness.Overall knowledge of COVID-19 symptoms was poor. Men and younger age groups (18-44) were less informed than women and older age groups (44 +). A significant proportion (21%) of the population would likely travel back to the UK whilst displaying COVID-19 symptoms with many expressing that they would not fully comply with self-isolation guidelines. Overall, males and younger age groups had a reduced perceived personal risk from contracting COVID-19, posing a higher risk of transporting SARS-CoV-2 back to the UK. Poor passenger knowledge and behaviour undermines government guidelines and policies aimed at preventing SARS-CoV-2 entry into the UK. This supports the need for stricter, clearer and more targeted guidelines with point-of-departure viral testing and stricter quarantining upon arrival.