RESUMO
Broadband high-speed absorption spectroscopy using swept-wavelength external cavity quantum cascade lasers (ECQCLs) is applied to measure multiple pyrolysis and combustion gases in biomass burning experiments. Two broadly-tunable swept-ECQCL systems were used, with the first tuned over a range of 2089-2262 cm-1 (4.42-4.79 µm) to measure spectra of CO2, H2O, and CO. The second was tuned over a range of 920-1150 cm-1 (8.70-10.9 µm) to measure spectra of ammonia (NH3), ethene (C2H4), and methanol (MeOH). Absorption spectra were measured continuously at a 100 Hz rate throughout the burn process, including inhomogeneous flame regions, and analyzed to determine time-resolved gas concentrations and temperature. The results provide in-situ, dynamic information regarding gas-phase species as they are generated, close to the biomass fuel source.
RESUMO
We report a continuous-wave (cw) 532-nm-pumped singly resonant optical parametric oscillator (SRO) based on periodically poled lithium niobate. The pump source is a commercial 5-W cw diode-pumped, multilongitudinal-mode, intracavity-doubled Nd:YVO(4) laser. Using a four-mirror ring SRO cavity and single-pass pumping, we achieved subwatt internal oscillation threshold, 56% quantum efficiency, and output tuning from 917 to 1266 nm.
RESUMO
We present a full-wafer fabrication process for periodically poled lithium niobate with a 6.5-mum domain period. Samples that were 53 mm long and 0.5 mm thick were obtained with this process for single-pass cw 1064-nm Nd:YAG second-harmonic generation. These samples exhibited 78% of the ideal nonlinear coefficient, had a measured conversion efficiency of 8.5% /W in the low-power limit, and produced 2.7 W of cw 532-nm output with 6.5 W of cw input, which corresponds to 42% power conversion efficiency.