Flexibility of 3D Extruded Printing for a Novel Controlled-Release Puerarin Gastric Floating Tablet: Design of Internal Structure.

The objective of this study was to investigate the development of a novel puerarin gastric floating system with a concentric annular internal pattern by a 3D extrusion-based printing technique and to explore the flexibility of turning the release behavior through the design of the internal structure. The composition consisted of the conventional sustained-release pharmaceutical excipients without addition of foaming agent or light materials. First, the proper alcohol/water proportion was selected for the binding agent. The desired drug release behaviors and good floating properties were obtained either through modification of the formulation composition or adjustment of the internal structure. In vitro, the printed tablets were evaluated for drug release, mechanical properties, lag time, and floating duration time. The in vivo behaviors of the formulations were noted at certain time intervals through assessment of the radiographic pictures of healthy volunteers. The gastric retention time in the 3D-printed tablet was approximately 6 h in vivo. Results indicated these puerarin gastric floating 3D-printed tablets had great potential to achieve good gastric residence time and controlled release. Therefore, 3D extrusion-based printing appears to be appropriate for the production of oral administration systems, owing to its flexibility and the great floating ability and controlled-release capacity of its products.

Structure-Based Gastro-Retentive and Controlled-Release Drug Delivery with Novel 3D Printing.

In the present contribution, the aim is to explore and establish a way in which 3D printing and gastro-retentive drug delivery systems (GRDDSs) are combined (focusing on inner structure innovation) to achieve extended and stable gastro-retention and controlled-release of drug. Three digital models diverse in construction were designed and substantialized by a pressure-assisted microsyringe (PAM) 3D printer. Preparations were characterized by means of DSC, XRD, FTIR, and SEM. In vitro buoyancy study and in vivo gamma scintigraphy method were conducted to validate gastro-retention property of these innovative preparations in vitro/in vivo respectively. Release kinetic model was established and release mechanism was discussed. Tablets manufactured under certain range of parameters (intersecting angle, full filling gap) were tight and accurate in shape. Tablets printed with specific parameters (full filling gap, 50%; nozzle extrusion speed, 0.006 mm/s; layer height, 0.4 mm; compensation value, 0.25; quantity of layers, 15; outline printing value, 2) exhibited satisfactory in vitro (10-12 h)/in vivo (8-10 h) retention ability and possessed stable 10-12 h controlled-release quality. In general, 3D printing has tremendous advantage over conventional fabrication technique in intricate drug delivery systems and will be widely employed in pharmacy.

Study of controlled-release floating tablets of dipyridamole using the dry-coated method.

Dipyridamole (DIP), having a short biological half-life, has a narrow absorption window and is primarily absorbed in the stomach. So, the purpose of this study was to prepare controlled-release floating (CRF) tablets of dipyridamole by the dry-coated method. The influence of agents with different viscosity, hydroxypropylmethylcellulose (HPMC) and polyvinylpyrollidon K30 (PVP K30) in the core tablet and low-viscosity HPMC and PVP K30 in the coating layer on drug release, were investigated. Then, a study with a three-factor, three-level orthogonal experimental design was used to optimize the formulation of the CRF tablets. After data processing, the optimized formulation was found to be: 80 mg HPMC K4M in the core tablet, 80 mg HPMC E15 in core tablet and 40 mg PVP K30 in the coating layer. Moreover, an in vitro buoyancy study showed that the optimized formulation had an excellent floating ability and could immediately float without a lag time and this lasted more than 12 h. Furthermore, an in vivo gamma scintigraphic study showed that the gastric residence time of the CRF tablet was about 8 h.

In vitro and in vivo evaluation of controlled-release matrix tablets of highly water-soluble drug applying different mw polyethylene oxides (PEO) as retardants.

The aim of the work presented is to prepare a controlled-release hydrophilic matrix tablet (CMT) controlling release of highly water-soluble drug applying pure combination of high- and low-Mw PEO as matrix materials, to avoid the lag time of drug release, and to overcome incomplete release in later stages. The influences of types and amounts of different Mw PEOs used, drug loading, pH of release medium and agitation rate on drug release were evaluated. The study of uptake and erosion of matrix was conducted and mechanism of improving drug release was discussed. In vivo pharmacokinetics of the CMT and reference preparation self-made controlled-release osmotic pump tablets (COPT) were performed in beagle dogs. The optimized formulation containing 43% PEO WSR 303 and 32% PEO N750 showed a zero order release from 1 h to 12 h. In vivo results demonstrated that the CMT had similar AUC0-48 h and Cmax with the COPT but smaller Tmax than the COPT and provided a more stable therapeutic concentration compared to the COPT. In conclusion, hydrophilic matrix tablet combining only different Mw PEOs as matrix materials had very good potential to be developed into a controlled-release drug delivery system for highly water-soluble drug. Besides, its manufacturing processes were succinct which would be preferable for modern medicine industry.

Aqueous Polymer Dispersion Coating Used for Osmotic Pump Tablets: Membrane Property Investigation and IVIVC Evaluation.

The objective of this study was to investigate the fundamental properties of propranolol hydrochloride osmotic pump tablets coated by aqueous polymer dispersion, simultaneously exploring the in vitro and in vivo correlation of the tablet. The physicochemical properties and parameters of aqueous polymer dispersion membranes (SEM, water uptake, and water vapor transmission coefficient) were investigated. In addition, the release behavior and the in vitro release and in vivo absorption profiles of the tablets coated by aqueous polymer dispersion were investigated by comparing with propranolol hydrochloride osmotic pump tablets coated by an organic solvent. Results showed that the similarity factor (f 2) between cellulose acetate-coated tablet and Eudragit-coated tablet was 78.1, and f 2 between cellulose acetate-coated tablet and Kollicoat-coated tablet was 77.6. The linear IVIVC of Eudragit-coated and Kollicoat-coated osmotic pump tablets was determined, which confirmed excellent correlation between the absorption in vivo and the drug release in vitro. Consequently, the membrane coated by aqueous polymer dispersion or organic solvent has similar in vitro release rates of controlled release. Also, compared with organic solvent coating, aqueous polymer dispersion has numerous advantages, such as reduced toxicity and no environmental damage. Therefore, the aqueous polymer dispersion technology has enormous potential as a replacement of organic solvent coating.

Design and Evaluation of Hydrophilic Matrix System Containing Polyethylene Oxides for the Zero-Order Controlled Delivery of Water-Insoluble Drugs.

The aim of this study was to design a polyethylene oxide (PEO) binary hydrophilic matrix controlled system and investigate the most important influence(s) on the in vitro water-insoluble drug release behavior of this controlled system. Direct-compressed PEO binary matrix tablets were obtained from a variety of low viscosity hydrophilic materials as a sustained agent, using anhydrous drugs as a model drug. Water uptake rate, swelling rate, and erosion rate of matrices were investigated for the evaluation of the PEO hydrophilic matrix systems. The effect of the dose, the solubility of water-insoluble drug, and the rheology of polymers on in vitro release were also discussed. Based on the in vitro release kinetics study, three optimized PEO binary matrices were selected for further research. And, these PEO binary matrices had shown the similar release behavior that had been evaluated by the similarity factor f 2. Further study indicated that they had identical hydration, swelling, and erosion rate. Moreover, rheology study exhibited the similar rheological equation of Herschel-Bulkley and their viscosity was also within the same magnitude. Therefore, viscosity plays the most important role to control drug release compared to other factors in PEO binary matrix system. This research provides fundamental understanding of in vitro drug release of PEO binary hydrophilic matrix tablets and helps pharmaceutical workers to develop a hydrophilic controlled system, which will effectively shorten the process of formulation development by reducing trial-and-error.

Design of a Time-Controlled Pulsatile Release System for Propranolol Using the Dry-Coated Method: In Vitro and In Vivo Evaluation.

The objective of this study was to design a time-controlled pulsatile release (TCPR) system containing propranolol (PNH) as an active pharmaceutical ingredient. Here, the developed dosage forms were coated with hydroxypropyl-methylcellulose (HPMC) and other excipients as barrier layer using dry-coated technology. The influence of HPMC, microcrystalline cellulose (MCC), and lactose in the outer coating and the coating weight on drug release were investigated. Then, a three-factor, five-level central composite design (CCD) and response surface method were used to optimize the formula of the coating. After data processing, the optimal prescription was found to be as follows: HPMC E50(X1) 86.2 mg, MCC(X2) 43.8 mg, and lactose (X3) 21.3 mg in the coating. Moreover, the in vitro tests showed that the optimized formulation of TCPR had a lag time of 4 h followed by a 4-h drug release. Also, determination of the extent of erosion of the TCPR tablets revealed that the lag time is related to the coating erosion speed. The in vivo test in beagle dogs and comparison of the parameters for the TCPR tablets and reference preparations showed significant differences for Tmax (7.83 ± 0.408 and 2 ± 0.00) and Cmax (185.45 ± 28.561 and 587 ± 45.27 ng/ml) but no significant differences in the AUC0-∞ (1757.876 ± 208.832 and 1779.69 ± 229.02 ng h/ml). These results demonstrated that the TCPR tablets successfully prolonged the lag time and controlled the release of propranolol.

Preparation and investigation of novel gastro-floating tablets with 3D extrusion-based printing.

Three dimensional (3D) extrusion-based printing is a paste-based rapid prototyping process, which is capable of building complex 3D structures. The aim of this study was to explore the feasibility of 3D extrusion-based printing as a pharmaceutical manufacture technique for the fabrication of gastro-floating tablets. Novel low-density lattice internal structure gastro-floating tablets of dipyridamole were developed to prolong the gastric residence time in order to improve drug release rate and consequently, improve bioavailability and therapeutic efficacy. Excipients commonly employed in the pharmaceutical study could be efficiently applied in the room temperature 3D extrusion-based printing process. The tablets were designed with three kinds of infill percentage and prepared by hydroxypropyl methylcellulose (HPMC K4M) and hydroxypropyl methylcellulose (HPMC E15) as hydrophilic matrices and microcrystalline cellulose (MCC PH101) as extrusion molding agent. In vitro evaluation of the 3D printed gastro-floating tablets was performed by determining mechanical properties, content uniformity, and weight variation. Furthermore, re-floating ability, floating duration time, and drug release behavior were also evaluated. Dissolution profiles revealed the relationship between infill percentage and drug release behavior. The results of this study revealed the potential of 3D extrusion-based printing to fabricate gastro-floating tablets with more than 8h floating process with traditional pharmaceutical excipients and lattice internal structure design.

Zero-Order Controlled Delivery of Gliclazide from Polyethylene Oxides Matrix Tables: In vitro and In vivo Evaluation.

BACKGROUND: In recent years, controlled and sustained release drug delivery system has become the focus of pharmaceutical researchers. Some technologies aimed to develop the controlled and sustained release of the drug, which used to be administered several times a day and generate plasma concentration fluctuation. As all, a controlled drug release rate has always been a goal pursued by researchers. This paper introduced a controlled delivery hydrophilic matrix system, and evaluated their relevance between in vitro and in vivo behaviors. METHODS: The matrix tablets were fabricated by direct powder compression method. Single-factor test and the orthogonal experimental design were used to find out the optimal formulation. And the in vivo pharmacokinetics study was also evaluated in this paper. RESULTS: The amount of WSR N301 and low viscosity materials significantly affect the drug release. Compared with commercially available sustained-release tablets Diamicron®, the pharmacokinetics parameters of these matrix tablets exhibited similar blood profiles, and other parameters such as prolonged Tmax, Cmax, MRT and similar bioavailability. However, this matrix system showed unstable blood profiles in comparison with two-layer-core osmotic pump tablet. The IVIVC study suggested that there was a good correlation between absorption in vivo and drug release in vitro. CONCLUSION: Zero-order controlled drug release of hydrophilic matrix system has the simpler manufacture process. And it will be a promising system to control drug release. Due to the disadvantage of hydrophilic matrix tablets in vivo release, for further research the zero-order delivery of PEO matrix tablets system, some pharmaceutical technology are needed to decrease the influence of gastrointestinal peristalsis. Therefore, the study of polyethylene oxide hydrophilic matrix tablets provides a promising formulation for promoting the development of a drug delivery system.

A time-adjustable pulsatile release system for ketoprofen: In vitro and in vivo investigation in a pharmacokinetic study and an IVIVC evaluation.

A time-adjustable pulsatile release system (TAPS) containing ketoprofen (KF) as an active pharmaceutical agent was developed having been designed for bedtime dosing and releasing drug in the early morning to control the symptoms of rheumatoid arthritis (RA). The formulation involved a tablet core (KF) and a control-release layer, and the coating membrane was composed of EC and Eudragit L100. A single-factor study, a central composite design and a response surface method were selected to optimize the formula and the optimum prescription was as follows: tablet core (KF 50mg, MCC 70mg, lactose 40mg, L-HPC 38mg), and film (EC 7.8g, Eudragit L100 4.2g, PEG 6000 1.8g in 95% alcohol each 200ml). The in vivo release behavior of the tablets was evaluated in Beagle dogs after a parallel oral administration of KF TAPS tablets and commercial KF capsules, when it was found that the KF TAPS tablets released the drug after a lag-time of 3.458h and the Tmax was 5.833h. The relative bioavailability was 85.01%, and the two formulations were bioequivalent in terms of Cmax and AUC0-t and the in vitro- in vivo correlations indicated that test formulation had a good in vivo-in vitro correlation (r=0.9703). These results show that the novel drug delivery system (TAPS) has the potential to be used as a KF preparation with chronophamacokinetics characteristics.

Preparation and investigation of controlled-release glipizide novel oral device with three-dimensional printing.

The purpose of this study was to explore the feasibility of combining fused deposition modeling (FDM) 3D printing technology with hot melt extrusion (HME) to fabricate a novel controlled-release drug delivery device. Glipizide used in the treatment of diabetes was selected as model drug, and was successfully loaded into commercial polyvinyl alcohol (PVA) filaments by HME method. The drug-loaded filaments were printed through a dual-nozzle 3D printer, and finally formed a double-chamber device composed by a tablet embedded within a larger tablet (DuoTablet), each chamber contains different contents of glipizide. The drug-loaded 3D printed device was evaluated for drug release under in vitro dissolution condition, and we found the release profile fit Korsmeyer-Peppas release kinetics. With the double-chamber design, it is feasible to design either controlled drug release or delayed drug release behavior by reasonably arranging the concentration distribution of the drug in the device. The characteristics of the external layer performed main influence on the release profile of the internal compartment such as lag-time or rate of release. The results of this study suggest the potential of 3D printing to fabricate controlled-release drug delivery system containing multiple drug concentration distributions via hot melt extrusion method and specialized design configurations.