Controlled In Situ Self-Assembly of Biotinylated Trans-Cyclooctene Nanoparticles for Orthogonal Dual-Pretargeted Near-Infrared Fluorescence and Magnetic Resonance Imaging.

A pretargeted strategy that decouples targeting vectors from radionuclides has shown promise for nuclear imaging and/or therapy in vivo. However, the current pretargeted approach relies on the use of antibodies or nanoparticles as the targeting vectors, which may be compromised by poor tissue penetration and limited accumulation of targeting vectors in the tumor tissues. Herein, we present an orthogonal dual-pretargeted approach by combining stimuli-triggered in situ self-assembly strategy with fast inverse electron demand Diels-Alder (IEDDA) reaction and strong biotin-streptavidin (SA) interaction for near-infrared fluorescence (NIR FL) and magnetic resonance (MR) imaging of tumors. This approach uses a small-molecule probe (P-Cy-TCO&Bio) containing both biotin and trans-cyclooctene (TCO) as a tumor-targeting vector. P-Cy-TCO&Bio can efficiently penetrate subcutaneous HeLa tumors through biotin-assisted targeted delivery and undergo in situ self-assembly to form biotinylated TCO-bearing nanoparticles (Cy-TCO&Bio NPs) on tumor cell membranes. Cy-TCO&Bio NPs exhibited an "off-on" NIR FL and retained in the tumors, offering a high density of TCO and biotin groups for the concurrent capture of Gd-chelate-labeled tetrazine (Tz-Gd) and IR780-labeled SA (SA-780) via the orthogonal IEDDA reaction and SA-biotin interaction. Moreover, Cy-TCO&Bio NPs offered multiple-valent binding modes toward SA, which additionally regulated the cross-linking of Cy-Gd&Bio NPs into microparticles (Cy-Gd&Bio/SA MPs). This process could significantly (1) increase r1 relaxivity and (2) enhance the accumulation of Tz-Gd and SA-780 in the tumors, resulting in strong NIR FL, bright MR contrast, and an extended time window for the clear and precise imaging of HeLa tumors.

Single-Cell Caspase-3 Measurement Using a Biomimetic Nanochannel.

Direct single-cell caspase-3 (Casp-3) analysis has remained challenging. A study of single-cell Casp-3 could contribute to revealing the fundamental pathogenic mechanisms in Casp-3-associated diseases. Here, a biomimetic nanochannel capable of single-cell sampling and ionic detection of intracellular Casp-3 is devised, which is established upon the installment of target-specific organic molecules (luc-DEVD) within the orifice of a glass nanopipette. The specific cleavage of luc-DEVD by Casp-3 could induce changes of inner-surface chemical groups and charge properties, thus altering the ionic response of the biomimetic nanochannel for direct Casp-3 detection. The practical applicability of this biomimetic nanochannel is confirmed by probing intracellular Casp-3 fluctuation upon drug stimulation and quantifying the Casp-3 evolution during induced apoptosis. This work realizes ionic single-cell Casp-3 analysis and provides a different perspective for single-cell protein analysis.

Tailoring a Near-Infrared Macrocyclization Scaffold Allows the Control of In Situ Self-Assembly for Photoacoustic/PET Bimodal Imaging.

Enzyme-triggered macrocyclization and in situ self-assembly of small molecules into nanoparticles has shown promise to design activatable probes for molecular imaging. However, controlling macrocyclization and self-assembly to concurrently augment positron emission tomography (PET) and photoacoustic (PA) signals for bimodality imaging is challenging. Herein, we report the engineering of a triazole-IR780 fluorophore as a versatile macrocyclization scaffold for controlling in situ self-assembly and design a caspase-3-activatable PA/PET bimodal probe ([18 F]-IR780-1) for in vivo imaging of tumor apoptosis. By leveraging the high-sensitivity whole-body imaging signals offered by PET with the high-resolution imaging signals offered by PA, [18 F]-IR780-1 can provide a promising tool for the early evaluation of antitumor efficacy, helpful for optimizing the therapeutic protocol for patients. This scaffold may be adopted to design other activatable bimodal probes for in vivo imaging.

An Activatable Near-Infrared Fluorescence Probe for in Vivo Imaging of Acute Kidney Injury by Targeting Phosphatidylserine and Caspase-3.

Renal-clearable and target-responsive near-infrared (NIR) fluorescent imaging probes have been promising for in vivo diagnosis of acute kidney injury (AKI). However, designing an imaging probe that is renal-clearable and concurrently responsive toward multiple molecular targets to facilitate early detection of AKI with improved sensitivity and specificity is challenging. Herein, by leveraging the receptor-mediated binding and retention effect along with enzyme-triggered fluorescence activation, we design and synthesize an activatable small-molecule NIR fluorescent probe (1-DPA2) using a "one-pot sequential click reaction" approach. 1-DPA2 can target both the externalized phosphatidylserine (PS) and active caspase-3 (Casp-3), two essential biomarkers of apoptosis, producing enhanced 808 nm NIR fluorescence and a high signal-to-background ratio (SBR) amenable to detecting the onset of cisplatin-induced AKI in mice as early as 24 h post-treatment with cisplatin. We not only monitor the gradual activation of Casp-3 in the kidney of mice upon AKI progression but also can report on the progressive recovery of kidney functions in AKI mice following N-acetyl-l-cysteine (NAC) therapy via real-time fluorescence imaging by 1-DPA2. This study demonstrates the ability of 1-DPA2 for longitudinal monitoring of renal cell apoptosis by concurrently targeting PS externalization and Casp-3 activation, which is efficient for early diagnosis of AKI and useful for prediction of potential drug nephrotoxicity as well as in vivo screening of anti-AKI drugs' efficacy.

NIR Scaffold Bearing Three Handles for Biocompatible Sequential Click Installation of Multiple Functional Arms.

Near-infrared (NIR) probes are ideal for fluorescence labeling and imaging of biological targets in living animals. However, the instability of common NIR dyes hampers the construction of NIR probes bearing multiple functional components such as biomolecules for specific targeting and imaging reagents for multimodality imaging. To overcome these limitations, we designed a novel NIR scaffold bearing two terminal alkynes as clickable handles and a chloride on the heptamethine backbone that allows nucleophilic substitution with an azide to generate the third clickable handle. This unique scaffold allows for facile installation of multiple functional arms for the construction of multifunctional NIR probes. Various biomacromolecules or imaging reagents can be introduced to the NIR scaffold by sequential one-pot click reactions under biocompatible conditions. The preclickable handle chloride on the NIR backbone does not interfere with the initial click reactions, and it can be easily transformed into an azide for a following click reaction. On the basis of this unique NIR scaffold, we developed a highly efficient method to construct diverse NIR probes containing multiple functional biomolecules including peptides, antibodies, nucleic acids, and NIR/PET (positron emission tomography) dual-modality imaging probes bearing tumor-targeting groups. NIR imaging or multimodality imaging using these probes was performed on live cells or tumor models on living mice.

A Photoacoustic Probe for the Imaging of Tumor Apoptosis by Caspase-Mediated Macrocyclization and Self-Assembly.

Photoacoustic (PA) imaging shows promise in the sensitive detection of caspase-3 activated in early tumor apoptosis in response to chemotherapy; smart PA probes are thus in high demand. Herein, we report the first smart PA probe (1-RGD) responsive to caspase-3, enabling real-time and high-resolution imaging of tumor apoptosis. 1-RGD is designed to leverage the synergetic effect of active delivery and caspase-3 activation. It is selectively recognized by active caspase-3 to trigger peptide substrate cleavage and biocompatible macrocyclization-mediated self-assembly, leading to an amplified PA imaging signal and prolonged retention in apoptotic tumor cells. Strong, high-resolution PA images are obtained in chemotherapy-induced apoptotic tumors in living mice after intravenous administration with 1-RGD, facilitating sensitive reporting of caspase-3 activity and distribution within tumor tissues.

A carbonic anhydrase-targeted NIR-II fluorescent cisplatin theranostic nanoparticle for combined therapy of pancreatic tumors.

Optically active organic nanoparticles capable of emitting strong near-infrared II (NIR-II) fluorescence and eliciting tumor hyperthermia are promising for tumor imaging and photothermal therapy (PTT). However, their applications for the treatment of pancreatic tumors via mere PTT are challenging as both the nanoparticles and light are hard to enter the deeply located pancreatic tumors. Here, we report a NIR-II light excitable, carbonic anhydrase (CA)-targeting cisplatin prodrug-decorated nanoparticle (IRNPs-SBA/PtIV) for NIR-II fluorescence imaging (FLI)-guided combination PTT and chemotherapy of pancreatic tumors. IRNPs-SBA/PtIV is designed to hold a high photothermal conversion efficiency (PCE ≈ 65.17 %) under 1064 nm laser excitation, a strong affinity toward CA (Kd = 14.40 ± 5.49 nM), and a prominent cisplatin release profile in response to glutathione (GSH) and 1064 nm laser irradiation. We show that IRNPs-SBA/PtIV can be actively delivered into pancreatic tumors where the CA is upregulated, and emits NIR-II fluorescence to visualize tumors with a high sensitivity and penetration depth under 980 nm laser excitation. Moreover, the tumor-resided IRNPs-SBA/PtIV can efficiently inhibit the CA activity and consequently, relieve the acidic and hypoxic tumor microenvironment, benefiting to intensify chemotherapy. Guided by the NIR-II FLI, IRNPs-SBA/PtIV is capable of efficiently inhibiting pancreatic tumor growth via combinational PTT and chemotherapy with 1064 nm laser excitation under a low-power density (0.5 W cm-2, 10 min). This study demonstrates promise to fabricate NIR-II excitable nanoparticles for FLI-guided precise theranostics of pancreatic tumors.

Controlled sequential in situ self-assembly and disassembly of a fluorogenic cisplatin prodrug for cancer theranostics.

Temporal control of delivery and release of drugs in tumors are important in improving therapeutic outcomes to patients. Here, we report a sequential stimuli-triggered in situ self-assembly and disassembly strategy to direct delivery and release of theranostic drugs in vivo. Using cisplatin as a model anticancer drug, we design a stimuli-responsive small-molecule cisplatin prodrug (P-CyPt), which undergoes extracellular alkaline phosphatase-triggered in situ self-assembly and succeeding intracellular glutathione-triggered disassembly process, allowing to enhance accumulation and elicit burst release of cisplatin in tumor cells. Compared with cisplatin, P-CyPt greatly improves antitumor efficacy while mitigates off-target toxicity in mice with subcutaneous HeLa tumors and orthotopic HepG2 liver tumors after systemic administration. Moreover, P-CyPt also produces activated near-infrared fluorescence (at 710 nm) and dual photoacoustic imaging signals (at 700 and 750 nm), permitting high sensitivity and spatial-resolution delineation of tumor foci and real-time monitoring of drug delivery and release in vivo. This strategy leverages the advantages offered by in situ self-assembly with those of intracellular disassembly, which may act as a general platform for the design of prodrugs capable of improving drug delivery for cancer theranostics.

Recent advances in stimuli-responsive in situ self-assembly of small molecule probes for in vivo imaging of enzymatic activity.

Stimuli-responsive in situ self-assembly of small molecule probes into nanostructures has been promising for the construction of molecular probes for in vivo imaging. In the past few years, a number of intelligent molecular imaging probes with fluorescence, magnetic resonance imaging (MRI), positron electron tomography (PET) or photoacoustic imaging (PA) modality have been developed based on the in situ self-assembly strategy. In this minireview, we summarize the recent advances in the development of different modality imaging probes through controlling in situ self-assembly for in vivo imaging of enzymatic activity. This review starts from the brief introduction of two different chemical approaches amenable for in situ self-assembly, including (1) stimuli-mediated proteolysis and (2) stimuli-triggered biocompatible reaction. We then discuss their applications in the design of fluorescence, MRI, PET, PA, and bimodality imaging probes for in vivo imaging of different enzymes, such as caspase-3, furin, gelatinase and phosphatase. Finally, we discuss the current and prospective challenges in the stimuli-responsive in situ self-assembly strategy for in vivo imaging.