Initial metal-metal bond breakage detected by fs X-ray scattering in the photolysis of Ru3(CO)12 in cyclohexane at 400 nm.

Using femtosecond resolution X-ray solution scattering at a free electron laser we were able to directly observe metal-metal bond cleavage upon photolysis at 400 nm of Ru3(CO)12, a prototype for the photochemistry of transition metal carbonyls. This leads to the known single intermediate Ru3(CO)11(µ-CO)*, with a bridging ligand (µCO) and where the asterisk indicates an open Ru3-ring. This loses a CO ligand on a picosecond time scale yielding a newly observed triple bridge intermediate, Ru3(CO)8(µ-CO)3*. This loses another CO ligand to form the previously observed Ru3(CO)10, which returns to Ru3(CO)12via the known single-bridge Ru3(CO)10(µ-CO). These results indicate that contrary to long standing hypotheses, metal-metal bond breakage is the only chemical reaction immediately following the photolysis of Ru3(CO)12 at 400 nm. Combined with previous picosecond resolution X-ray scattering data and time resolved infrared spectroscopy these results yield a new mechanism for the photolysis of Ru3(CO)12.

NpSe2 : a Binary Chalcogenide Containing Modulated Selenide Chains and Ambiguous-Valent Metal.

A new binary compound, NpSe2, possesses metal-chalcogen and chalcogen-chalcogen interactions different from those reported for other metal dichalcogenides. Its structure is incommensurately modulated and features linear Se chains and valence-ambiguous Np cations.

Soft X-Ray Second Harmonic Generation as an Interfacial Probe.

Nonlinear optical processes at soft x-ray wavelengths have remained largely unexplored due to the lack of available light sources with the requisite intensity and coherence. Here we report the observation of soft x-ray second harmonic generation near the carbon K edge (∼284 eV) in graphite thin films generated by high intensity, coherent soft x-ray pulses at the FERMI free electron laser. Our experimental results and accompanying first-principles theoretical analysis highlight the effect of resonant enhancement above the carbon K edge and show the technique to be interfacially sensitive in a centrosymmetric sample with second harmonic intensity arising primarily from the first atomic layer at the open surface. This technique and the associated theoretical framework demonstrate the ability to selectively probe interfaces, including those that are buried, with elemental specificity, providing a new tool for a range of scientific problems.

Towards characterization of photo-excited electron transfer and catalysis in natural and artificial systems using XFELs.

The ultra-bright femtosecond X-ray pulses provided by X-ray Free Electron Lasers (XFELs) open capabilities for studying the structure and dynamics of a wide variety of biological and inorganic systems beyond what is possible at synchrotron sources. Although the structure and chemistry at the catalytic sites have been studied intensively in both biological and inorganic systems, a full understanding of the atomic-scale chemistry requires new approaches beyond the steady state X-ray crystallography and X-ray spectroscopy at cryogenic temperatures. Following the dynamic changes in the geometric and electronic structure at ambient conditions, while overcoming X-ray damage to the redox active catalytic center, is key for deriving reaction mechanisms. Such studies become possible by using the intense and ultra-short femtosecond X-ray pulses from an XFEL, where sample is probed before it is damaged. We have developed methodology for simultaneously collecting X-ray diffraction data and X-ray emission spectra, using an energy dispersive spectrometer, at ambient conditions, and used this approach to study the room temperature structure and intermediate states of the photosynthetic water oxidizing metallo-protein, photosystem II. Moreover, we have also used this setup to simultaneously collect the X-ray emission spectra from multiple metals to follow the ultrafast dynamics of light-induced charge transfer between multiple metal sites. A Mn-Ti containing system was studied at an XFEL to demonstrate the efficacy and potential of this method.

Multiconfigurational nature of 5f orbitals in uranium and plutonium intermetallics.

Uranium and plutonium's 5f electrons are tenuously poised between strongly bonding with ligand spd-states and residing close to the nucleus. The unusual properties of these elements and their compounds (e.g., the six different allotropes of elemental plutonium) are widely believed to depend on the related attributes of f-orbital occupancy and delocalization for which a quantitative measure is lacking. By employing resonant X-ray emission spectroscopy (RXES) and X-ray absorption near-edge structure (XANES) spectroscopy and making comparisons to specific heat measurements, we demonstrate the presence of multiconfigurational f-orbital states in the actinide elements U and Pu and in a wide range of uranium and plutonium intermetallic compounds. These results provide a robust experimental basis for a new framework toward understanding the strongly-correlated behavior of actinide materials.

Ex situ formation of metal selenide quantum dots using bacterially derived selenide precursors.

Luminescent quantum dots were synthesized using bacterially derived selenide (Se(II-)) as the precursor. Biogenic Se(II-) was produced by the reduction of Se(IV) by Veillonella atypica and compared directly against borohydride-reduced Se(IV) for the production of glutathione-stabilized CdSe and ß-mercaptoethanol-stabilized ZnSe nanoparticles by aqueous synthesis. Biological Se(II-) formed smaller, narrower size distributed QDs under the same conditions. The growth kinetics of biologically sourced CdSe phases were slower. The proteins isolated from filter sterilized biogenic Se(II-) included a methylmalonyl-CoA decarboxylase previously characterized in the closely related Veillonella parvula. XAS analysis of the glutathione-capped CdSe at the S K-edge suggested that sulfur from the glutathione was structurally incorporated within the CdSe. A novel synchrotron based XAS technique was also developed to follow the nucleation of biological and inorganic selenide phases, and showed that biogenic Se(II-) is more stable and more resistant to beam-induced oxidative damage than its inorganic counterpart. The bacterial production of quantum dot precursors offers an alternative, 'green' synthesis technique that negates the requirement of expensive, toxic chemicals and suggests a possible link to the exploitation of selenium contaminated waste streams.

5f covalency from x-ray resonant Raman spectroscopy.

X-ray resonant Raman spectroscopy (XRRS), a variant of resonant inelastic x-ray scattering, has been used to investigate the two prototype systems, UF4and UO2. Both are U5f2and each is an example of 5f localized, ionic behavior and 5f localized, covalent behavior, respectively. From the M5XRRS measurements, the 5f band gap in each can be directly determined and, moreover, a clear and powerful sensitivity to 5f covalency emerges.

A systematic review and meta-analysis on the therapeutic equivalence of statins.

BACKGROUND: Statins are the most commonly prescribed agents for hypercholesterolemia because of their efficacy and tolerability. As the number of patients in need of statin therapy continues to increase, information regarding the relative efficacy and safety of statins is required for decision-making. OBJECTIVE: This study will use systematic review to compare the efficacy and safety profiles of different statins at different doses and determine the therapeutically equivalent doses of statins to achieve a specific level of low-density lipoprotein cholesterol (LDL-C) lowering effect. METHODS: Publications of head-to-head randomized controlled trials (RCTs) of statins were retrieved from the Oregon state database (1966-2004), MEDLINE (2005-April of 2006), EMBASE (2005-April of 2006), and the Cochrane Controlled Trials Registry (up to the first quarter of 2006). The publications were evaluated with predetermined criteria by a reviewer before they were included in the review. The mean change in cholesterol level of each statin was calculated and weighted by number of subjects involved in each RCT. Where possible, meta-analysis was performed to generate pooled estimates of the cholesterol lowering effect of statins and the difference between statins. RESULTS: Seventy-five studies reporting RCTs of head-to-head comparisons on statins were included. Most studies had similar baseline characteristics, except the rosuvastatin related studies. A daily dose of atorvastatin 10 mg, fluvastatin 80 mg, lovastatin 40-80 mg, and simvastatin 20 mg could decrease LDL-C by 30-40%, and fluvastatin 40 mg, lovastatin 10-20 mg, pravastatin 20-40 mg, and simvastatin 10 mg could decrease LDL-C by 20-30%. The only two statins that could reduce LDL-C more than 40% were rosuvastatin and atorvastatin at a daily dose of 20 mg or higher. Meta-analysis indicated a statistically significant but clinically minor difference (<7%) between statins in cholesterol lowering effect. Comparisons of coronary heart disease prevention and safety could not be made because of insufficient data. CONCLUSIONS: At comparable doses, statins are therapeutically equivalent in reducing LDL-C.

A versatile Johansson-type tender x-ray emission spectrometer.

We present a high energy resolution x-ray spectrometer for the tender x-ray regime (1.6-5.0 keV) that was designed and operated at Stanford Synchrotron Radiation Lightsource. The instrument is developed on a Rowland geometry (500 mm of radius) using cylindrically bent Johansson analyzers and a position sensitive detector. By placing the sample inside the Rowland circle, the spectrometer operates in an energy-dispersive mode with a subnatural line-width energy resolution (∼0.32 eV at 2400 eV), even when an extended incident x-ray beam is used across a wide range of diffraction angles (∼30° to 65°). The spectrometer is enclosed in a vacuum chamber, and a sample chamber with independent ambient conditions is introduced to enable a versatile and fast-access sample environment (e.g., solid/gas/liquid samples, in situ cells, and radioactive materials). The design, capabilities, and performance are presented and discussed.

A seven-crystal Johann-type hard x-ray spectrometer at the Stanford Synchrotron Radiation Lightsource.

We present a multicrystal Johann-type hard x-ray spectrometer (~5-18 keV) recently developed, installed, and operated at the Stanford Synchrotron Radiation Lightsource. The instrument is set at the wiggler beamline 6-2 equipped with two liquid nitrogen cooled monochromators--Si(111) and Si(311)--as well as collimating and focusing optics. The spectrometer consists of seven spherically bent crystal analyzers placed on intersecting vertical Rowland circles of 1 m of diameter. The spectrometer is scanned vertically capturing an extended backscattering Bragg angular range (88°-74°) while maintaining all crystals on the Rowland circle trace. The instrument operates in atmospheric pressure by means of a helium bag and when all the seven crystals are used (100 mm of projected diameter each), has a solid angle of about 0.45% of 4π sr. The typical resolving power is in the order of E/ΔE ~ 10,000. The spectrometer's high detection efficiency combined with the beamline 6-2 characteristics permits routine studies of x-ray emission, high energy resolution fluorescence detected x-ray absorption and resonant inelastic x-ray scattering of very diluted samples as well as implementation of demanding in situ environments.

A high resolution and large solid angle x-ray Raman spectroscopy end-station at the Stanford Synchrotron Radiation Lightsource.

We present a new x-ray Raman spectroscopy end-station recently developed, installed, and operated at the Stanford Synchrotron Radiation Lightsource. The end-station is located at wiggler beamline 6-2 equipped with two monochromators-Si(111) and Si(311) as well as collimating and focusing optics. It consists of two multi-crystal Johann type spectrometers arranged on intersecting Rowland circles of 1 m diameter. The first one, positioned at the forward scattering angles (low-q), consists of 40 spherically bent and diced Si(110) crystals with 100 mm diameters providing about 1.9% of 4π sr solid angle of detection. When operated in the (440) order in combination with the Si (311) monochromator, an overall energy resolution of 270 meV is obtained at 6462.20 eV. The second spectrometer, consisting of 14 spherically bent Si(110) crystal analyzers (not diced), is positioned at the backward scattering angles (high-q) enabling the study of non-dipole transitions. The solid angle of this spectrometer is about 0.9% of 4π sr, with a combined energy resolution of 600 meV using the Si (311) monochromator. These features exceed the specifications of currently existing relevant instrumentation, opening new opportunities for the routine application of this photon-in/photon-out hard x-ray technique to emerging research in multidisciplinary scientific fields, such as energy-related sciences, material sciences, physical chemistry, etc.