Liquid-Phase Synthesis of Highly Reactive Rare-Earth Metal Nanoparticles.

The first liquid-phase synthesis of high-quality, small-sized rare-earth metal nanoparticles (1-3 nm)-ranging from lanthanum as one of the largest (187 pm) to scandium as the smallest (161 pm) rare-earth metal-is shown. Size, oxidation state, and reactivity of the nanoparticles are examined (e.g., electron microscopy, electron spectroscopy, X-ray absorption spectroscopy, selected reactions). Whereas the nanoparticles are highly reactive (e.g. in contact to air and water), they are chemically stable as THF suspensions and powders under inert conditions. The reactivity can be controlled to obtain inorganic and metal-organic compounds at room temperature.

Structural Properties and ELNES of Polycrystalline and Nanoporous Mg3N2.

Nanoporous, high-purity magnesium nitride (Mg3N2) was synthesized with a liquid ammonia-based process, for potential applications in optoelectronics, gas separation and catalysis, since these applications require high material purity and crystallinity, which has seldom been demonstrated in the past. One way to evaluate the degree of crystalline near-range order and atomic environment is electron energy-loss spectroscopy (EELS) in a transmission electron microscope. However, there are hardly any data on Mg3N2, which makes identification of electron energy-loss near-edge structure (ELNES) features difficult. Therefore, we have studied nanoporous Mg3N2 with EELS in detail in comparison to EELS spectra of bulk Mg3N2, which was analyzed as a reference material. The N-K and Mg-K edges of both materials are similar. Despite having the same crystal structure, however, there are differences in fine-structural features, such as shifts and absences of peaks in the N-K and Mg-K edges of nanoporous Mg3N2. These differences in ELNES are attributed to coordination changes in nanoporous Mg3N2 caused by the significantly smaller crystallite size of 2-6 nm compared to the larger (25-125 nm) crystal size in a bulk material.

Lithiumpyridinyl-Driven Synthesis of High-Purity Zero-Valent Iron Nanoparticles and Their Use in Follow-Up Reactions.

The synthesis of zero-valent iron (Fe(0)) nanoparticles in pyridine using lithium bipyridinyl ([LiBipy]) or lithium pyridinyl ([LiPy]) is presented. FeCl3 is used as the most simple starting material and reduced either in a [LiBipy]-driven two-step approach or in a [LiPy]-driven one-pot synthesis. High-quality nanoparticles are obtained with uniform, spherical shape, and mean diameters of 2.9 ± 0.5 nm ([LiBipy]) or 4.1 ± 0.7 nm ([LiPy]). The as-prepared, high purity Fe(0) nanoparticles are monocrystalline. In addition to particle characterization (high-resolution transmission electron microscopy, scanning transmission electron microscopy, dynamic light scattering), composition and purity are examined in detail based on electron diffraction, X-ray powder diffraction, elemental analysis, infrared spectroscopy, 57 Fe Mössbauer spectroscopy, and magnetic measurements. Due to their small size and high purity, the Fe(0) nanoparticles are highly reactive. They can be used in follow-up reactions to obtain a variety of iron compounds, which is exemplarily shown for the transformation to iron carbide (Fe3 C) nanoparticles, the reaction with sulfur to obtain FeS nanoparticles, or the direct reaction with pentamethylcyclopentadiene to FeCp*2 (Cp*: pentamethylcyclopentadienyl).

Pyridine-based Liquid-Phase Synthesis of Crystalline TiN and ZnSiN2 Nanoparticles.

TiN and ZnSiN2 nanoparticles are obtained via a novel pyridine-based synthesis route. This one-pot liquid-phase route strictly avoids all oxygen sources (including starting materials, surface functionalization, solvents), which is highly relevant in regard of the material purity and material properties. Colloidally stable suspensions of crystalline, small-sized TiN (5.4±0.4 nm) and ZnSiN2 (5.2±1.1 nm) are instantaneously available from the liquid phase. Elemental analysis and electron energy loss spectroscopy confirm the purity of the compounds and specifically the absence of oxygen. The as-prepared ZnSiN2 show yellowish emission (500-700 nm) already at room temperature with its maximum at 570 nm.

Impact of synthesis conditions on the morphology and crystal structure of tungsten nitride nanomaterials.

Nanocrystalline tungsten nitride (WN x ) aggregates and nanosheets are synthesized with a new alkylamine-based synthesis strategy for potential applications in nanoelectronics and catalysis. These applications preferentially require crystalline materials with controlled morphology, which has been rarely demonstrated for WN x nanomaterials in the past. In the synthesis approach presented in this work, the morphology of nanoscale WN x is controlled by long-chained amines that form lyotropic or lamellar phases depending on the surfactant concentration. The structural and chemical properties of the WN x nanomaterials are studied in detail using different electron microscopic techniques in combination with electron spectroscopic analyses. Material synthesis and sample preparation for transmission electron microscopy (TEM) were performed in an argon atmosphere (Schlenk line and glovebox). The samples were inserted into the electron microscope via an air-tight TEM transfer holder to protect the material from hydrolysis and oxidation. From the lyotropic phase nanocrystalline WN x aggregates were obtained, which consist of 2.4 ± 0.8 nm small crystallites of the cubic WN x phase with a composition of WN0.7. The lamellar phase with a higher surfactant concentration yields WN x nanosheets with lateral dimensions up to 500 nm and a mean thickness of 2.1 ± 1.1 nm. The nanosheets are N rich with a composition WN1.7-3.7 and occur in the hexagonal crystal structure. The nanosheets are often stacked on top of one another with frequent rotations of 4-6° around the hexagonal c axis, thereby forming commensurate interface structures between nanosheets. High stacking-fault densities and signs of nanotwins can be repeatedly observed in WN x nanosheets.