RESUMO
We show that dehydrogenation of hydrogenated graphene proceeds much more slowly for bilayer systems than for single layer systems. We observe that an underlayer of either pristine or hydrogenated graphene will protect an overlayer of hydrogenated graphene against a number of chemical oxidants, thermal dehydrogenation, and degradation in an ambient environment over extended periods of time. Chemical protection depends on the ease of oxidant intercalation, with good intercalants such as Br2 demonstrating much higher reactivity than poor intercalants such as 1,2-dichloro-4,5-dicyanonbenzoquinone (DDQ). Additionally, the rate of dehydrogenation of hydrogenated graphene at 300 °C in H2/Ar was reduced by a factor of roughly 10 in the presence of a protective underlayer of graphene or hydrogenated graphene. Finally, the slow dehydrogenation of hydrogenated graphene in air at room temperature, which is normally apparent after a week, could be completely eliminated in samples with protective underlayers over the course of 39 days. Such protection will be critical for ensuring the long-term stability of devices made from functionalized graphene.
RESUMO
We present microscopic models for surface fouling of an isotropic spherical catalytic microswimmer at and away from equilibrium and show how a foulant gradient can induce chemotactic behavior. Our simulations establish that the presence of foulant manifests itself in two ways: as a braking effect on propulsive particle motion, and as a drift term which probes the foulant concentration gradient. Our results suggest that, while foulant gradients are unlikely to be directly useful for chemotactically directed particles, they nevertheless exert a non-negligible influence on particle motion under a wide range of conditions.
RESUMO
Single-layer graphene chemically reduced by the Birch process delaminates from a Si/SiOx substrate when exposed to an ethanol/water mixture, enabling transfer of chemically functionalized graphene to arbitrary substrates such as metals, dielectrics, and polymers. Unlike in previous reports, the graphene retains hydrogen, methyl, and aryl functional groups during the transfer process. This enables one to functionalize the receiving substrate with the properties of the chemically modified graphene (CMG). For instance, magnetic force microscopy shows that the previously reported magnetic properties of partially hydrogenated graphene remain after transfer. We also transfer hydrogenated graphene from its copper growth substrate to a Si/SiOx wafer and thermally dehydrogenate it to demonstrate a polymer- and etchant-free graphene transfer for potential use in transmission electron microscopy. Finally, we show that the Birch reduction facilitates delamination of CMG by weakening van der Waals forces between graphene and its substrate.
RESUMO
Fluorination can alter the electronic properties of graphene and activate sites for subsequent chemistry. Here, we show that graphene fluorination depends on several variables, including XeF2 exposure and the choice of substrate. After fluorination, fluorine content declines by 50-80% over several days before stabilizing. While highly fluorinated samples remain insulating, mildly fluorinated samples regain some conductivity over this period. Finally, this loss does not reduce reactivity with alkylamines, suggesting that only nonvolatile fluorine participates in these reactions.
Assuntos
Fluoretos/química , Grafite/química , Eletricidade , Xenônio/químicaRESUMO
Graphene, synthesized either epitaxially on silicon carbide or via chemical vapor deposition (CVD) on a transition metal, is gathering an increasing amount of interest from industrial and commercial ventures due to its remarkable electronic, mechanical, and thermal properties, as well as the ease with which it can be incorporated into devices. To exploit these superlative properties, it is generally necessary to transfer graphene from its conductive growth substrate to a more appropriate target substrate. In this review, we analyze the literature describing graphene transfer methods developed over the last decade. We present a simple physical model of the adhesion of graphene to its substrate, and we use this model to organize the various graphene transfer techniques by how they tackle the problem of modulating the adhesion energy between graphene and its substrate. We consider the challenges inherent in both delamination of graphene from its original substrate as well as relamination of graphene onto its target substrate, and we show how our simple model can rationalize various transfer strategies to mitigate these challenges and overcome the introduction of impurities and defects into the graphene. Our analysis of graphene transfer strategies concludes with a suggestion of possible future directions for the field.
RESUMO
We present a low-cost, easy-to-implement platform for printing materials and interfacing them with eukaryotic cells. We show that thermal or chemical reduction of a graphene oxide thin film allows water-assisted delamination of the film from glass or plastic. The chemical and physical properties and permeability of the resulting film are dependent on the method of reduction and deposition of the graphene oxide, with thermal reduction removing more oxidized carbon functionality than chemical reduction. We also developed a method to attach the films onto cell surfaces using a thin layer of gelatin as an adhesive. In general, the films are highly impermeable to nutrients and we observed a significant amount of cell death when gelatin was not used; gelatin enables diffusion of nutrients for sustained cell viability. The combination of nanoscale membranes with a low melting point biopolymer allows us to reversibly interface cells with cargo transferred by graphene oxide while maintaining cell viability. To demonstrate delivery of electronic structures, we modified a commercial off-the-shelf printer to print a silver-based ink directly onto the reduced graphene oxide films which we then transferred to the surface of the cells.
Assuntos
Gelatina , Grafite , EletrônicaRESUMO
Molecules trapped inside fullerenes exhibit interesting quantum behavior, including quantization of their translational degrees of freedom. In this study, a theoretical framework for predicting quantum properties of nonlinear small molecules in nonsymmetric open-cage fullerenes (OCFs) has been described along the lines of similar theories which treat small molecules inside C(60) and clathrate cages. As an example, the coupled translational-rotational energy structure has been calculated for the case of CH(4) inside a known OCF. The calculated energy levels have been used to calculate the equilibrium fraction of incorporated CH(4) as well as the translational heat capacity for the encapsulated molecule. The heat capacity shows an anomalous maximum at 239 K for CH(4) and 215 K for CD(4) which are not present in free methane.
RESUMO
An endohedral methane complex of a fullerene derivative is first synthesized by insertion of a methane molecule through the opening of an open-cage C(60) derivative. The trapped methane is confirmed by NMR spectroscopy and mass spectrometry. Both methane carbon and protons show remarkable upfield shifts in NMR, characteristic of a chemical species in a fullerene cage. CH(4) protons appear as one equivalent signal in the (1)H NMR spectrum, suggesting that even methane can rotate in a C(60) cage.
RESUMO
We put ammonia into an open-cage fullerene with a 20-membered ring ( 1) as the orifice and examined the properties of the complex using NMR and MALDI-TOF mass spectroscopy. The proton NMR shows a broad resonance corresponding to endohedral NH 3 at delta H = -12.3 ppm relative to TMS. This resonance was seen to narrow when a (14)N decoupling frequency was applied. MALDI spectroscopy confirmed the presence of both 1 ( m/ z = 1172) and 1 + NH 3 ( m/ z = 1189), and integrated intensities of MALDI peak trains and NMR resonances indicate an incorporation fraction of 35-50% under our experimental conditions. NMR observations showed a diminished incorporation fraction after 6 months of storage at -10 degrees C, which indicates that ammonia slowly escapes from the open-cage fullerene.
Assuntos
Amônia/química , Fulerenos/química , Espectroscopia de Ressonância Magnética/métodos , Espectroscopia de Ressonância Magnética/normas , Conformação Molecular , Padrões de Referência , Espectrometria de Massas por Ionização e Dessorção a Laser Assistida por Matriz/métodosRESUMO
Partially hydrogenated graphene is ferromagnetic and may be patterned by electron-beam irradiation. Sequential patterning produces a patterned magnetic array. Removal of the hydrogen atoms also can convert electrically insulating fully hydrogenated graphene back into conductive graphene, enabling the writing of chemically isolated, dehydrogenated graphene nanoribbons as narrow as 100 nm.
RESUMO
Mechanical stress can drive chemical reactions and is unique in that the reaction product can depend on both the magnitude and the direction of the applied force. Indeed, this directionality can drive chemical reactions impossible through conventional means. However, unlike heat- or pressure-driven reactions, mechanical stress is rarely applied isometrically, obscuring how mechanical inputs relate to the force applied to the bond. Here we report an atomic force microscope technique that can measure mechanically induced bond scission on graphene in real time with sensitivity to atomic-scale interactions. Quantitative measurements of the stress-driven reaction dynamics show that the reaction rate depends both on the bond being broken and on the tip material. Oxygen cleaves from graphene more readily than fluorine, which in turn cleaves more readily than hydrogen. The technique may be extended to study the mechanochemistry of any arbitrary combination of tip material, chemical group and substrate.
RESUMO
We demonstrate that hydrogenated graphene performs as a homoepitaxial tunnel barrier on a graphene charge/spin channel. We examine the tunneling behavior through measuring the IV curves and zero bias resistance. We also fabricate hydrogenated graphene/graphene nonlocal spin valves and measure the spin lifetimes using the Hanle effect, with spintronic nonlocal spin valve operation demonstrated up to room temperature. We show that while hydrogenated graphene indeed allows for spin transport in graphene and has many advantages over oxide tunnel barriers, it does not perform as well as similar fluorinated graphene/graphene devices, possibly due to the presence of magnetic moments in the hydrogenated graphene that act as spin scatterers.