RESUMO
PURPOSE: Cone-beam computed tomography (CBCT) does not record dental morphology accurately because of the scattering produced by metallic restorations and the reported magnification of the dentition. The aim of this study was the development and evaluation of a new method for the replacement of the distorted dentition of CBCT scans with a 3-dimensional (3D) dental image captured by a digital intraoral camera. MATERIALS AND METHODS: Six dried skulls with orthodontic brackets fixed on the teeth were used in this study. Three intraoral markers made of dental stone were constructed and attached to orthodontic brackets. The skulls were scanned by CBCT and the occlusal surfaces were captured using the TRIOS 3D intraoral scanner. The digital intraoral scan (IOS) was fused into the CBCT models. This produced a new composite digital model of the skull and the dentition. The skulls were scanned again using the commercially accurate Faro laser arm to produce the 3D model the skull and teeth gold standard for the assessment of the accuracy of the developed method. This was assessed by measuring the distance between the occlusal surfaces of the new composite model and the gold standard 3D laser produced model. RESULTS: The results showed the errors related to the superimposition of the intraoral image on the CBCT to replace the distorted dentition were 0.11 to 0.20 mm. CONCLUSION: The results of this novel method suggest that the dentition on the CBCT scan can be accurately replaced with the digital IOS image captured by an intraoral scanner to create a composite model that will improve the accuracy of digital orthognathic surgical planning and the fabrication of the guiding occlusal wafer.
Assuntos
Tomografia Computadorizada de Feixe Cônico/métodos , Imageamento Tridimensional/métodos , Registro da Relação Maxilomandibular/métodos , Procedimentos Cirúrgicos Ortognáticos , Planejamento de Assistência ao Paciente , Interpretação de Imagem Radiográfica Assistida por Computador/métodos , Radiografia Dentária Digital/métodos , Humanos , Técnicas In VitroRESUMO
Transplantation of teeth has been done for hundreds of years. In the late 18th and early 19th century transplants of teeth between individuals were relatively common at specialist dental practices in London. Surprisingly tooth allotransplants have been found to last 6 years on average. In Scandinavia during the 1950 and 1960's autotransplantation of teeth began to be carried out under increasingly controlled conditions. These have proved to be very successful in long term studies with autotransplants surviving up to 45 years post-surgery. Recent developments in cone beam CT and rapid 3D prototyping have enabled the fabrication of accurate surgical templates which can be used to prepare the recipient site immediately prior to transplantation. This has resulted in a drastically reduced extra-oral time for the transplant teeth which can be expected to improve success rates further. Autotransplants provide significant advantages compared to single tooth implants and should be considered the treatment of choice in the growing child.
Assuntos
Ortodontia/história , Doenças Dentárias/história , Dente/transplante , História do Século XIX , História do Século XX , Humanos , Doenças Dentárias/cirurgia , Transplante Autólogo , Reino UnidoRESUMO
PURPOSE: The aim of this study was to clinically monitor the progression of tooth wear over a period of 1 year in a cohort of referred tooth wear patients through the use of a computer-aided design/computer-assisted manufacture (CAD/CAM) scanner and a standardized scanning/assessment methodology. MATERIALS AND METHODS: Polyether impressions were made of 11 participants (130 teeth) at baseline and at 1 year. Impressions were poured in type IV dental stone and the anterior teeth were 3D scanned. A surface-matching software was used to compare 1-year and baseline scans and identify any dimensional differences. RESULTS: Parafunctional habits were reported by all patients. All participants exhibited tooth wear ≥ 140 µm in depth and extending to ≥ 280 µm in at least one tooth. Maxillary central incisors were the most commonly and severely affected teeth. CONCLUSION: The ability of the developed CAD/CAM scanning methodology in clinical monitoring of tooth wear was demonstrated. Further research is needed to assess its practicality in large-scale epidemiologic tooth wear studies.
Assuntos
Desenho Assistido por Computador , Desgaste dos Dentes/diagnóstico , Materiais para Moldagem Odontológica , Técnica de Moldagem Odontológica , Progressão da Doença , Feminino , Humanos , Imageamento Tridimensional , Masculino , Pessoa de Meia-Idade , Projetos Piloto , Fatores de Risco , Inquéritos e QuestionáriosRESUMO
PURPOSE: The aim of this study was to detail and assess the capability of a novel methodology to 3D-quantify tooth wear progression in a patient over a period of 12 months. MATERIALS AND METHODS: A calibrated stainless steel model was used to identify the accuracy of the scanning system by assessing the accuracy and precision of the contact scanner and the dimensional accuracy and stability of casts fabricated from three different types of impression materials. Thereafter, the overall accuracy of the 3D scanning system (scanner and casts) was ascertained. Clinically, polyether impressions were made of the patient's dentition at the initial examination and at the 12-month review, then poured in type IV dental stone to assess the tooth wear. The anterior teeth on the resultant casts were scanned, and images were analyzed using 3D matching software to detect dimensional variations between the patient's impressions. RESULTS: The accuracy of the 3D scanning system was established to be 33 µm. 3D clinical analysis demonstrated localized wear on the incisal and palatal surfaces of the patient's maxillary central incisors. The identified wear extended to a depth of 500 µm with a distribution of 4% to 7% of affected tooth surfaces. CONCLUSION: The newly developed 3D scanning methodology was found to be capable of assessing and accounting for the various factors affecting tooth wear scanning. Initial clinical evaluation of the methodology demonstrates successful monitoring of tooth wear progression. However, further clinical assessment is needed.