Unraveling Molecular Composition in Biological Samples-Systematic Evaluation of Statistical Methods for the Analysis of Hyperspectral Raman Data.

Recently, confocal Raman microscopy has gained popularity in biomedical research for studying tissues in healthy and diseased state due to its ability to acquire chemically selective data in a noninvasive approach. However, biological samples, such as brain tissue, are inherently difficult to analyze due to the superposition of molecules in the Raman spectra and low variation of spectral features within the sample. The analysis is further impeded by pathological hallmarks, for example beta-amyloid (Aß) plaques in Alzheimer's disease, which are often solely characterized by subtle shifts in the respective Raman peaks. To unravel the underlying molecular information, convoluted statistical procedures are inevitable. Unfortunately, such statistical methods are often inadequately described, and most natural scientists lack knowledge of their appropriate use, causing unreproducible results and stagnation in the application of hyperspectral Raman imaging. Therefore, we have set out to provide a comprehensive guide to address these challenges with the example of a complex hyperspectral data set of brain tissue samples with Aß plaques. Our study encompasses established as well as novel statistical methods, including univariate analysis, principal component analysis, cluster analysis, spectral unmixing, and 2D correlation spectroscopy, and critically compares the outcomes of each analysis. Moreover, we transparently demonstrate the effect of preprocessing decisions like denoising and scaling techniques, providing valuable insights into implications of spectral quality for data evaluation. Thereby, this study provides a comprehensive evaluation of analysis approaches for complex hyperspectral Raman data, laying out a blueprint for elucidating meaningful information from biological samples in chemical imaging.

Bioactive Insulin-Loaded Electrospun Wound Dressings for Localized Drug Delivery and Stimulation of Protein Expression Associated with Wound Healing.

Effective therapy of wounds is difficult, especially for chronic, non-healing wounds, and novel therapeutics are urgently needed. This challenge can be addressed with bioactive wound dressings providing a microenvironment and facilitating cell proliferation and migration, ideally incorporating actives, which initiate and/or progress effective healing upon release. In this context, electrospun scaffolds loaded with growth factors emerged as promising wound dressings due to their biocompatibility, similarity to the extracellular matrix, and potential for controlled drug release. In this study, electrospun core-shell fibers were designed composed of a combination of polycaprolactone and polyethylene oxide. Insulin, a proteohormone with growth factor characteristics, was successfully incorporated into the core and was released in a controlled manner. The fibers exhibited favorable mechanical properties and a surface guiding cell migration for wound closure in combination with a high uptake capacity for wound exudate. Biocompatibility and significant wound healing effects were shown in interaction studies with human skin cells. As a new approach, analysis of the wound proteome in treated ex vivo human skin wounds clearly demonstrated a remarkable increase in wound healing biomarkers. Based on these findings, insulin-loaded electrospun wound dressings bear a high potential as effective wound healing therapeutics overcoming current challenges in the clinics.

Application of Confocal Raman Microscopy for the Characterization of Topical Semisolid Formulations and their Penetration into Human Skin Ex Vivo.

PURPOSE: The quality testing and approval procedure for most pharmaceutical products is a streamlined process with standardized procedures for the determination of critical quality attributes. However, the evaluation of semisolid dosage forms for topical drug delivery remains a challenging task. The work presented here highlights confocal Raman microscopy (CRM) as a valuable tool for the characterization of such products. METHODS: CRM, a laser-based method, combining chemically-selective analysis and high resolution imaging, is used for the evaluation of different commercially available topical acyclovir creams. RESULTS: We show that CRM enables the spatially resolved analysis of microstructural features of semisolid products and provides insights into drug distribution and polymorphic state as well as the composition and arrangement of excipients. Further, we explore how CRM can be used to monitor phase separation and to study skin penetration and the interaction with fresh and cryopreserved excised human skin tissue. CONCLUSION: This study presents a comprehensive overview and illustration of how CRM can facilitate several types of key analyses of semisolid topical formulations and of their interaction with their biological target site, illustrating that CRM is a useful tool for research, development as well as for quality testing in the pharmaceutical industry.

An initiator- and catalyst-free hydrogel coating process for 3D printed medical-grade poly(ε-caprolactone).

Additive manufacturing or 3D printing as an umbrella term for various materials processing methods has distinct advantages over many other processing methods, including the ability to generate highly complex shapes and designs. However, the performance of any produced part not only depends on the material used and its shape, but is also critically dependent on its surface properties. Important features, such as wetting or fouling, critically depend mainly on the immediate surface energy. To gain control over the surface chemistry post-processing modifications are generally necessary, since it's not a feature of additive manufacturing. Here, we report on the use of initiator and catalyst-free photografting and photopolymerization for the hydrophilic modification of microfiber scaffolds obtained from hydrophobic medical-grade poly(ε-caprolactone) via melt-electrowriting. Contact angle measurements and Raman spectroscopy confirms the formation of a more hydrophilic coating of poly(2-hydroxyethyl methacrylate). Apart from surface modification, we also observe bulk polymerization, which is expected for this method, and currently limits the controllability of this procedure.

Preparation, characterisation and in vitro antibacterial property of ciprofloxacin-loaded nanostructured lipid carrier for treatment of Bacillus subtilis infection.

Context: In this study, controlled ciprofloxacin (CIPRO) nanostrustructured lipid carriers of Precirol® ATO 5/Transcutol® HP (batch A) and tallow fat/Transcutol® HP (batch B) was carreid out. Objective: The aim was to improve solubility and bioavailability of CIPRO. Objective: Study of controlled ciprofloxacin (CIPRO) nanostructured lipid carriers of Precirol® ATO 5/Transcutol® HP (batch A) and tallow fat/Transcutol® HP (batch B). Methods: CIPRO concentrations C1-5 (0.0, 0.2, 0.5, 0.8, and 1.0% w/w) as AC1-5 and BC1-5 were prepared by hot homogenisation and characterised by zetasizer, differential scanning calorimetry, Fourier transform infra-red spectroscopy, in vitro drug release and growth inhibitory zone diameter (IZD) on agar-seeded Bacillus subtilis. Results: AC5 achieved polydispersed particles of ∼605 nm, 92% encapsulation efficiency (EE) and -28 mV similar to BC5 (∼789 nm, 91% EE, and -31 mV). Crystallinity indices (AC5 and BC5) were low at 3 and 5%, respectively. CIPRO release in AC5 was ∼98% in SGF (pH 1.2) and BC5 similarly ∼98% in SIF (pH 6.8). Conclusions: AC5 had superior growth inhibition of B. subtilis at lower concentration (1.2 µg/mL) than BC5 and CIPRO controls; hence could serve as possible sustained delivery system of CIPRO.

Redispersible Spray-Dried Powder Containing Nanoencapsulated Curcumin: the Drying Process Does Not Affect Neuroprotection In vitro.

A redispersible spray-dried formulation containing curcumin-loaded, lipid-core nanocapsules (LNC-C) was developed for oral administration. The neuroprotective activity of curcumin after the spray-drying process was evaluated in vitro. The spray-dried powder (SD-LNC-C) was produced using a drying adjuvant composed of a blend of maltodextrin and L-leucine (90:10 w/w). Acceptable process yield (~ 70%) and drug content (6.5 ± 0.2 mg g-1) were obtained. SD-LNC-C was formed by smooth, spherical-shaped particles, and confocal Raman analysis indicated the distribution of the LNC-C on the surface of the leucine/maltodextrin agglomerates. The surface of the agglomerates was formed by a combination of LNC-C and adjuvants, and laser diffraction showed that SD-LNC-C had adequate aqueous redispersion, with no loss of controlled drug release behaviour of LNC-C. The in vitro curcumin activity against the lipopolysaccharide (LPS)-induced proinflammatory response in organotypic hippocampal slice cultures was evaluated. Both formulations (LNC-C and SD-LNC-C) reduced TNF-α to similar levels. Therefore, neuroprotection of curcumin in vitro may be improved by nanoencapsulation followed by spray-drying, with no loss of this superior performance. Hence, the redispersible spray-dried powder proposed here represents a suitable approach for the development of innovative nanomedicines containing curcumin for the prevention/treatment of neurodegenerative diseases.

Circulating Lipoproteins: A Trojan Horse Guiding Squalenoylated Drugs to LDL-Accumulating Cancer Cells.

Selective delivery of anticancer drugs to rapidly growing cancer cells can be achieved by taking advantage of their high receptor-mediated uptake of low-density lipoproteins (LDLs). Indeed, we have recently discovered that nanoparticles made of the squalene derivative of the anticancer agent gemcitabine (SQGem) strongly interacted with the LDLs in the human blood. In the present study, we showed both in vitro and in vivo that such interaction led to the preferential accumulation of SQGem in cancer cells (MDA-MB-231) with high LDL receptor expression. As a result, an improved pharmacological activity has been observed in MDA-MB-231 tumor-bearing mice, an experimental model with a low sensitivity to gemcitabine. Accordingly, we proved that the use of squalene moieties not only induced the gemcitabine insertion into lipoproteins, but that it could also be exploited to indirectly target cancer cells in vivo.

Redispersible spray-dried lipid-core nanocapsules intended for oral delivery: the influence of the particle number on redispersibility.

This study proposes a new approach to produce easily redispersible spray-dried lipid-core nanocapsules (LNC) intended for oral administration, evaluating the influence of the particle number density of the fed sample. The proposed approach to develop redispersible spray-dried LNC formulations intended for oral route is innovative, evidencing the needing of an optimization of the initial particle number density in the liquid suspension of nanocapsules. A mixture of maltodextrin and L-leucine (90:10 w/w) was used as drying adjuvant. Dynamic light scattering, turbidimetry, determination of surface area and pore size distribution, electron microscopy and confocal Raman microscopy (CRM) were used to characterize the proposed system and to better understand the differences in the redispersion behavior. An easily aqueous redispersion of the spray-dried powder composed of maltodextrin and L-leucine (90:10 w/w) was obtained, depending on the particle number density. Their surface area decreased in the presence of LNC. CRM enabled the visualization of the spatial distribution of the different compounds in the powders affording to better understand the influence of the particle number density of the fed sample on their redispersion behavior. This study shows the need for optimizing initial particle number density in the liquid formulation to develop redispersible spray-dried LNC powders.

Controlling the Release of Proteins from Therapeutic Nanofibers: The Effect of Fabrication Modalities on Biocompatibility and Antimicrobial Activity of Lysozyme.

Therapeutic application of pharmacologically active proteins requires advanced drug delivery systems for stabilizing their activity and preventing denaturation during storage and patient treatment. Depending on their clinical target, controlled drug release is often required to achieve the intended therapeutic effect. In this context, electrospun nanofibers gained considerable attention. However, even though immediate drug release from such fibers can easily be realized, fiber mat fabrication providing long-term controlled protein release still bares challenges.In this study, lysozyme was encapsulated in poly(vinyl alcohol) fibers followed by post-modification with MeOH, glutaraldehyde vapor, or UV light. Subsequently, a systematic investigation of the effect of these post-modification treatments on the physicochemical properties of the fibers and the stability and release kinetics of lysozyme was performed. MeOH treatment did not affect lysozyme release kinetics compared to untreated fibers, whereas glutaraldehyde vapor and UV light treatment prolonged the drug release. Infrared spectroscopy revealed cross-linking of the polymer by glutaraldehyde vapor, which reduced the lysozyme release from the fibers. Further, protein activity was significantly reduced for fibers treated with glutaraldehyde vapor and UV light. In addition, reduced viability was identified for cells in contact with glutaraldehyde vapor-treated fibers and, to a lesser extent, for UV light-treated fibers, whereas MeOH-treated fibers did not affect cell viability. These results elucidated the effects of fiber post-modification on the release kinetics, activity, and biocompatibility of protein drugs and can serve as guidance for rational development of nanomedicines for safe and effective therapeutic delivery of natural proteins.

Delivery of Therapeutic Proteins Using Electrospun Fibers-Recent Developments and Current Challenges.

Proteins play a vital role within the human body by regulating various functions and even serving as structural constituent of many body parts. In this context, protein-based therapeutics have attracted a lot of attention in the last few decades as potential treatment of different diseases. Due to the steadily increasing interest in protein-based therapeutics, different dosage forms were investigated for delivering such complex macromolecules to the human body. Here, electrospun fibers hold a great potential for embedding proteins without structural damage and for controlled release of the protein for therapeutic applications. This review provides a comprehensive overview of the current state of protein-based carrier systems using electrospun fibers, with special emphasis on discussing their potential and key challenges in developing such therapeutic strategies, along with a prospective view of anticipated future directions.

Intracellular Delivery of Poorly Soluble Polyphenols: Elucidating the Interplay of Self-Assembling Nanocarriers and Human Chondrocytes.

Increased molecular understanding of multifactorial diseases paves the way for novel therapeutic approaches requiring sophisticated carriers for intracellular delivery of actives. We designed and characterized self-assembling lipid-core nanocapsules for coencapsulation of two poorly soluble natural polyphenols curcumin and resveratrol. The polyphenols were identified as high-potential therapeutic candidates intervening in the intracellular inflammation cascade of chondrocytes during the progress of osteoarthritis. To elucidate the interplay between chondrocytes and nanocapsules and their therapeutic effect, we pursued a complementary analytical approach combining label-free visualization with biological assays. Primary human chondrocytes did not show any adverse effects upon nanocapsule application and coherent anti-Stokes Raman scattering images visualized their intracellular uptake. Further, by systematically blocking different uptake mechanisms, an energy independent uptake into the cells could be identified. Additionally, we tested the therapeutic effect of the polyphenol-loaded carriers on inflamed chondrocytes. Treatment with nanocapsules resulted in a major reduction of nitric oxide levels, a well-known apoptosis trigger during the course of osteoarthritis. For a more profound examination of this protective effect on joint cells, we pursued studies with atomic force microscopy investigations. Significant changes in the cell cytoskeleton as well as prominent dents in the cell membrane upon induced apoptosis were revealed. Interestingly, these effects could not be detected for chondrocytes which were pretreated with the nanocapsules. Overall, besides presenting a sophisticated carrier system for joint application, these results highlight the necessity of establishing combinatorial analytical approaches to elucidate cellular uptake, the interplay of codelivered drugs and their therapeutic effect on the subcellular level.

Budesonide Loaded PLGA Nanoparticles for Targeting the Inflamed Intestinal Mucosa--Pharmaceutical Characterization and Fluorescence Imaging.

PURPOSE: The purpose of this study was to evaluate the specifically targeted efficiency of budesonide loaded PLGA nanoparticles for the treatment of inflammatory bowel disease (IBD). METHODS: The nanoparticles were prepared by an oil/water (O/W) emulsion evaporation technique. The nanoparticles were characterized for their size, shape and in vitro drug release profile. Solid state characterization was carried out by differential scanning calorimetry (DSC) and X-ray Power diffraction (XPRD). In order to evaluate the targeted efficiency of nanoparticles, a particle localization study in the healthy and in the inflamed colon was determined in vivo. These data were complemented by cryo-sections. RESULTS: Nanoparticles were 200 ± 05 nm in size with a smooth and spherical shape. The encapsulation efficiency was around 85 ± 3.5%, which was find-out by both, direct and indirect methods. Release of budesonide from the nanoparticles showed a biphasic release profile with an initial burst followed by sustained release. XPRD data revealed that the drug in the polymer matrix existed in crystalline state. Nanoparticles accumulation in inflamed tissues was evaluated by in-vivo imaging system and it was found that particles are accumulated in abundance at the site of inflammation when compared to the healthy group. CONCLUSION: The study demonstrates that the budesonide loaded PLGA nanoparticles are an efficient delivery system for targeted drug delivery to the inflamed intestinal mucosa.

Synthesis of a deuterated probe for the confocal Raman microscopy imaging of squalenoyl nanomedicines.

The synthesis of ω-di-(trideuteromethyl)-trisnorsqualenic acid has been achieved from natural squalene. The synthesis features the use of a Shapiro reaction of acetone-d 6 trisylhydrazone as a key step to implement the terminal isopropylidene-d 6 moiety. The obtained squalenic acid-d 6 has been coupled to gemcitabine to provide the deuterated analogue of squalenoyl gemcitabine, a powerful anticancer agent endowed with self-assembling properties. The Raman spectra of both deuterated and non-deuterated squalenoyl gemcitabine nanoparticles displayed significant Raman scattering signals. They revealed no differences except from the deuterium peak patterns in the silent spectral region of cells. This paves the way for label-free intracellular trafficking studies of squalenoyl nanomedicines.

Novel in vitro approaches for the simulation and analysis of human skin wounds.

Considering the increasing incidence of chronic wounds and severe wound infections, effective drug delivery to wounded skin is of high importance. The rational development of novel therapeutic systems requires appropriate in vitro testing methodologies. In this context, suitable and reliable in vitro models simulating human wounds and advanced analytical techniques for precise wound characterization are urgently needed. In this study, we introduce a novel in vitro model based on excised human skin. In contrast to the established wound models, our novel approach has a coffin-shaped, linear, rectangular geometry with defined wound edges exhibiting consistent appearance along the entire wound bed. In addition, we introduce optical profilometry as a novel technique for nondestructive wound analysis. We successfully demonstrate the applicability of this optical imaging method based on white light reflection for three-dimensional visualization of different wound models. Furthermore, we create virtual noninvasive cross sections of these wounds to assess wound geometry in direct comparison to conventional histological analysis. Imaging analysis of our novel coffin-shaped model resulted in reproducible virtual sections along the entire wound bed. Our findings indicate the potential of our novel in vitro model for improved simulation of human wounds. Further, we successfully overcome the limitations of conventional histological analysis by the employment of optical profilometry for nondestructive three-dimensional wound characterization.

Combining confocal Raman microscopy and freeze-drying for quantification of substance penetration into human skin.

In the area of dermatological research, the knowledge of rate and extent of substance penetration into the human skin is essential not only for evaluation of therapeutics, but also for risk assessment of chemicals and cosmetic ingredients. Recently, confocal Raman microscopy emerged as a novel analytical technique for analysis of substance skin penetration. In contrast to destructive drug extraction and quantification, the technique is non-destructive and provides high spatial resolution in three dimensions. However, the generation of time-resolved concentration depth profiles is restrained by ongoing diffusion of the penetrating substance during analysis. To prevent that, substance diffusion in excised human skin can instantly be stopped at defined time points by freeze-drying the sample. Thus, combining sample preparation by freeze-drying with drug quantification by confocal Raman microscopy yields a novel analytical platform for non-invasive and quantitative in vitro analysis of substance skin penetration. This work presents the first proof-of-concept study for non-invasive quantitative substance depth profiling in freeze-dried excised human stratum corneum by confocal Raman microscopy.

The interplay of Pseudomonas aeruginosa and Staphylococcus aureus in dual-species biofilms impacts development, antibiotic resistance and virulence of biofilms in in vitro wound infection models.

Due to high tolerance to antibiotics and pronounced virulence, bacterial biofilms are considered a key factor and major clinical challenge in persistent wound infections. They are typically composed of multiple species, whose interactions determine the biofilm's structural development, functional properties and thus the progression of wound infections. However, most attempts to study bacterial biofilms in vitro solely rely on mono-species populations, since cultivating multi-species biofilms, especially for prolonged periods of time, poses significant challenges. To address this, the present study examined the influence of bacterial composition on structural biofilm development, morphology and spatial organization, as well as antibiotic tolerance and virulence on human skin cells in the context of persistent wound infections. By creating a wound-mimetic microenvironment, the successful cultivation of dual-species biofilms of two of the most prevalent wound pathogens, Pseudomonas aeruginosa and Staphylococcus aureus, was realized over a period of 72 h. Combining quantitative analysis with electron microscopy and label-free imaging enabled a comprehensive evaluation of the dynamics of biofilm formation and matrix secretion, revealing a twofold increased maturation of dual-species biofilms. Antibiotic tolerance was comparable for both mono-species cultures, however, dual-species communities showed a 50% increase in tolerance, mediated by a significantly reduced penetration of the applied antibiotic into the biofilm matrix. Further synergistic effects were observed, where dual-species biofilms exacerbated wound healing beyond the effects observed from either Pseudomonas or Staphylococcus. Consequently, predicting biofilm development, antimicrobial tolerance and virulence for multi-species biofilms based solely on the results from mono-species biofilms is unreliable. This study underscores the substantial impact of a multi-species composition on biofilm functional properties and emphasizes the need to tailor future studies reflecting the bacterial composition of the respective in vivo situation, leading to a more comprehensive understanding of microbial communities in the context of basic microbiology and the development of effective treatments.

Unlocking the potential of microfold cells for enhanced permeation of nanocarriers in oral drug delivery.

The therapeutic effects of orally administered nanocarriers depend on their ability to effectively permeate the intestinal mucosa, which is one of the major challenges in oral drug delivery. Microfold cells are specialized enterocytes in the intestinal epithelium known for their high transcytosis abilities. This study aimed to compare and evaluate two targeting approaches using surface modifications of polymer-based nanocarriers, whereas one generally addresses enterocytes, and one is directed explicitly to microfold cells via targeting the sialyl LewisA motif on their surface. We characterized the resulting carriers in terms of size and charge, supplemented by scanning electron microscopy to confirm their structural properties. For predictive biological testing and to assess the intended targeting effect, we implemented two human intestinal in vitro models containing microfold-like cells. Both models were thoroughly characterized prior to permeation studies with the different nanocarriers. Our results demonstrated improved transport for both targeted formulations compared to undecorated carriers in the in vitro models. Notably, there was an enhanced uptake in the presence of microfold-like cells, particularly for the nanocarriers directed by the anti-sialyl LewisA antibody. These findings highlight the potential of microfold cell targeting to improve oral administration of drugs and emphasize the importance of using suitable and well-characterized in vitro models for testing novel drug delivery strategies.

Biodegradable core-shell carriers for simultaneous encapsulation of synergistic actives.

Simultaneous encapsulation of multiple active substances in a single carrier is essential for therapeutic applications of synergistic combinations of drugs. However, traditional carrier systems often lack efficient encapsulation and release of incorporated substances, particularly when combinations of drugs must be released in concentrations of a prescribed ratio. We present a novel biodegradable core-shell carrier system fabricated in a one-step, solvent-free process on a microfluidic chip; a hydrophilic active (doxorubicin hydrochloride) is encapsulated in the aqueous core, while a hydrophobic active (paclitaxel) is encapsulated in the solid shell. Particle size and composition can be precisely controlled, and core and shell can be individually loaded with very high efficiency. Drug-loaded particles can be dried and stored as a powder. We demonstrate the efficacy of this system through the simultaneous encapsulation and controlled release of two synergistic anticancer drugs using two cancer-derived cell lines. This solvent-free platform technology is also of high potential value for encapsulation of other active ingredients and chemical reagents.

Freeze-drying as a preserving preparation technique for in vitro testing of human skin.

In vitro testing of drugs with excised human skin is a valuable prerequisite for clinical studies. However, the analysis of excised human skin presents several obstacles. Ongoing drug diffusion, microbial growth and changes in hydration state influence the results of drug penetration studies. In this work, we evaluate freeze-drying as a preserving preparation method for skin samples to overcome these obstacles. We analyse excised human skin before and after freeze-drying and compare these results with human skin in vivo. Based on comprehensive thermal and spectroscopic analysis, we demonstrate comparability to in vivo conditions and exclude significant changes within the skin samples due to freeze-drying. Furthermore, we show that freeze-drying after skin incubation with drugs prevents growth of drug crystals on the skin surface due to drying effects. In conclusion, we introduce freeze-drying as a preserving preparation technique for in vitro testing of human skin.

Bacteriophage-loaded functional nanofibers for treatment of P. aeruginosa and S. aureus wound infections.

The increasing incidence of infected skin wounds poses a major challenge in clinical practice, especially when conventional antibiotic therapy fails. In this context, bacteriophages emerged as promising alternatives for the treatment of antibiotic-resistant bacteria. However, clinical implementation remains hampered by the lack of efficient delivery approaches to infected wound tissue. In this study, bacteriophage-loaded electrospun fiber mats were successfully developed as next-generation wound dressings for the treatment of infected wounds. We employed a coaxial electrospinning approach, creating fibers with a protective polymer shell, enveloping bacteriophages in the core while maintaining their antimicrobial activity. The novel fibers exhibited a reproducible fiber diameter range and morphology, while the mechanical fiber properties were ideal for application onto wounds. Further, immediate release kinetics for the phages were confirmed as well as the biocompatibility of the fibers with human skin cells. Antimicrobial activity was demonstrated against Staphylococcus aureus and Pseudomonas aeruginosa and the core/shell formulation maintained the bacteriophage activity for 4 weeks when stored at - 20 °C. Based on these promising characteristics, our approach holds great potential as a platform technology for the encapsulation of bioactive bacteriophages to enable the translation of phage therapy into clinical application.