RESUMO
BACKGROUND: Yeasts exhibit promising potential for the microbial conversion of crude glycerol, owing to their versatility in delivering a wide range of value-added products, particularly lipids. Sweetwater, a methanol-free by-product of the fat splitting process, has emerged as a promising alternative feedstock for the microbial utilization of crude glycerol. To further optimize sweetwater utilization, we compared the growth and lipid production capabilities of 21 oleaginous yeast strains under different conditions with various glycerol concentrations, sweetwater types and pH. RESULTS: We found that nutrient limitation and the unique carbon composition of sweetwater boosted significant lipid accumulation in several strains, in particular Rhodosporidium toruloides NRRL Y-6987. Subsequently, to decipher the underlying mechanism, the transcriptomic changes of R. toruloides NRRL Y-6987 were further analyzed, indicating potential sugars and oligopeptides in sweetwater supporting growth and lipid accumulation as well as exogenous fatty acid uptake leading to the enhanced lipid accumulation. CONCLUSION: Our comparative study successfully demonstrated sweetwater as a cost-effective feedstock while identifying R. toluroides NRRL Y-6987 as a highly promising microbial oil producer. Furthermore, we also suggested potential sweetwater type and strain engineering targets that could potentially enhance microbial lipid production.
Assuntos
Glicerol , Leveduras , Glicerol/química , Ácidos Graxos/química , Carbono , BiocombustíveisRESUMO
We describe scalable and cost-efficient production of full length, His-tagged severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) spike glycoprotein trimer by Chinese hamster ovary (CHO) cells that can be used to detect SARS-CoV-2 antibodies in patient sera at high specificity and sensitivity. Transient production of spike in both human embryonic kidney (HEK) and CHO cells mediated by polyethyleneimine was increased significantly (up to 10.9-fold) by a reduction in culture temperature to 32°C to permit extended duration cultures. Based on these data GS-CHO pools stably producing spike trimer under the control of a strong synthetic promoter were cultured in hypothermic conditions with combinations of bioactive small molecules to increase yield of purified spike product 4.9-fold to 53 mg/L. Purification of recombinant spike by Ni-chelate affinity chromatography initially yielded a variety of co-eluting protein impurities identified as host cell derived by mass spectrometry, which were separated from spike trimer using a modified imidazole gradient elution. Purified CHO spike trimer antigen was used in enzyme-linked immunosorbent assay format to detect immunoglobulin G antibodies against SARS-CoV-2 in sera from patient cohorts previously tested for viral infection by polymerase chain reaction, including those who had displayed coronavirus disease 2019 (COVID-19) symptoms. The antibody assay, validated to ISO 15189 Medical Laboratories standards, exhibited a specificity of 100% and sensitivity of 92.3%. Our data show that CHO cells are a suitable host for the production of larger quantities of recombinant SARS-CoV-2 trimer which can be used as antigen for mass serological testing.
Assuntos
Teste para COVID-19/métodos , COVID-19/diagnóstico , SARS-CoV-2/metabolismo , Glicoproteína da Espícula de Coronavírus/biossíntese , Animais , Células CHO , COVID-19/virologia , Cricetinae , Cricetulus , Humanos , Proteínas Recombinantes/biossíntese , Testes Sorológicos/métodosRESUMO
BACKGROUND: The expression of XCR1 receptor and its metamorphic ligand lymphotactin (hLtn) has been shown in cancers but their precise role in tumorigenesis is poorly understood including the significance of the physiologically existing hLtn monomeric (CC3) and dimeric (W55D) confirmations where the latter thought to function as the receptor antagonist. The aim of this study was to explore the functional role of bioengineered hLtn variants and the role of fibroblasts in XCR1/hLtn expression regulation in oral cancer cells (OCCL). MATERIAL AND METHODS: qRT-PCR and flow cytometry were performed to evaluate mRNA and protein expression of XCR1 and hLtn. Recombinant hLtn variants (wild-type, CC3 and W55D mutant) were designed, expressed, purified and evaluated using proliferation, adhesion and chemotaxis assays. XCR1 and hLtn expression regulation by fibroblasts was determined using indirect co-culture. XCR1 and hLtn expression in primary and metastatic OSCC tissue was assessed using immunohistochemistry. RESULTS: hLtn caused a significant decrease in OCCL XCR1 surface protein expression. hLtn CC3 mutant was highly functional facilitating proliferation and migration. Conditioned media from primary cancer-associated and senescent fibroblasts significantly upregulated XCR1 and hLtn mRNA expression in OCCL. Immunohistochemistry revealed higher XCR1 and hLtn expression in metastatic tumour deposits and surrounding stroma compared to primary OSCC tissue. CONCLUSIONS: The development of hLtn biological mutants, regulation of XCR1 expression by its ligand hLtn and crosstalk with fibroblasts are novel findings suggesting an important role for the XCR1/hLtn axis within the OSCC tumour microenvironment. These discoveries build upon previous studies and suggest that the hLtn/XCR1 axis has a significant role in stromal crosstalk and OSCC progression.
Assuntos
Quimiocinas C , Neoplasias Bucais , Movimento Celular , Quimiocinas , Quimiocinas C/genética , Humanos , Linfocinas , Neoplasias Bucais/genética , Sialoglicoproteínas , Microambiente TumoralRESUMO
QuickStep is a cloning method that allows seamless point integration of a DNA sequence at any position within a target plasmid using only Q5 High-Fidelity DNA Polymerase and DpnI endonuclease. This efficient and cost-effective method consists of two steps: two parallel asymmetric PCRs, followed by a megaprimer-based whole-plasmid amplification. To further simplify the workflow, enhance the efficiency, and increase the uptake of QuickStep, we replaced the asymmetric PCRs with a conventional PCR that uses phosphorothioate (PTO) oligos to generate megaprimers with 3' overhangs. The ease and speed of PTO-QuickStep were demonstrated through (1) right-first-time cloning of a 1.8 kb gene fragment into a pET vector and (2) creating a random mutagenesis library for directed evolution. Unlike most ligation-free random mutagenesis library creation methods (e.g., megaprimer PCR of whole plasmid [MEGAWHOP]), PTO-QuickStep does not require the gene of interest to be precloned into an expression vector to prepare a random mutagenesis library. Therefore, PTO-QuickStep is a simple, reliable, and robust technique, adding to the ever-expanding molecular toolbox of synthetic biology and expediting protein engineering via directed evolution.
Assuntos
Clonagem Molecular/métodos , Mutagênese , Reação em Cadeia da Polimerase/métodos , Engenharia de Proteínas/métodos , DNA/genética , DNA/metabolismo , DNA Polimerase Dirigida por DNA/metabolismo , Desoxirribonucleases de Sítio Específico do Tipo II/metabolismo , Evolução Molecular Direcionada/métodos , Escherichia coli/genética , Escherichia coli/metabolismo , Biblioteca Gênica , Plasmídeos/genética , Plasmídeos/metabolismoRESUMO
Cupriavidus necator H16 is a non-pathogenic Gram-negative betaproteobacterium that can utilize a broad range of renewable heterotrophic resources to produce chemicals ranging from polyhydroxybutyrate (biopolymer) to alcohols, alkanes, and alkenes. However, C. necator H16 utilizes carbon sources to different efficiency, for example its growth in glycerol is 11.4 times slower than a favorable substrate like gluconate. This work used adaptive laboratory evolution to enhance the glycerol assimilation in C. necator H16 and identified a variant (v6C6) that can co-utilize gluconate and glycerol. The v6C6 variant has a specific growth rate in glycerol 9.5 times faster than the wild-type strain and grows faster in mixed gluconate-glycerol carbon sources compared to gluconate alone. It also accumulated more PHB when cultivated in glycerol medium compared to gluconate medium while the inverse is true for the wild-type strain. Through genome sequencing and expression studies, glycerol kinase was identified as the key enzyme for its improved glycerol utilization. The superior performance of v6C6 in assimilating pure glycerol was extended to crude glycerol (sweetwater) from an industrial fat splitting process. These results highlight the robustness of adaptive laboratory evolution for strain engineering and the versatility and potential of C. necator H16 for industrial waste glycerol valorization.
Assuntos
Carbono/metabolismo , Cupriavidus necator/metabolismo , Biocombustíveis , Biopolímeros/metabolismo , Glicerol/metabolismoRESUMO
Malonyl-CoA is the basic building block for synthesizing a range of important compounds including fatty acids, phenylpropanoids, flavonoids and non-ribosomal polyketides. Centering around malonyl-CoA, we summarized here the various metabolic engineering strategies employed recently to regulate and control malonyl-CoA metabolism and improve cellular productivity. Effective metabolic engineering of microorganisms requires the introduction of heterologous pathways and dynamically rerouting metabolic flux towards products of interest. Transcriptional factor-based biosensors translate an internal cellular signal to a transcriptional output and drive the expression of the designed genetic/biomolecular circuits to compensate the activity loss of the engineered biosystem. Recent development of genetically-encoded malonyl-CoA sensor has stood out as a classical example to dynamically reprogram cell metabolism for various biotechnological applications. Here, we reviewed the design principles of constructing a transcriptional factor-based malonyl-CoA sensor with superior detection limit, high sensitivity and broad dynamic range. We discussed various synthetic biology strategies to remove pathway bottleneck and how genetically-encoded metabolite sensor could be deployed to improve pathway efficiency. Particularly, we emphasized that integration of malonyl-CoA sensing capability with biocatalytic function would be critical to engineer efficient microbial cell factory. Biosensors have also advanced beyond its classical function of a sensor actuator for in situ monitoring of intracellular metabolite concentration. Applications of malonyl-CoA biosensors as a sensor-invertor for negative feedback regulation of metabolic flux, a metabolic switch for oscillatory balancing of malonyl-CoA sink pathway and source pathway and a screening tool for engineering more efficient biocatalyst are also presented in this review. We envision the genetically-encoded malonyl-CoA sensor will be an indispensable tool to optimize cell metabolism and cost-competitively manufacture malonyl-CoA-derived compounds.
Assuntos
Técnicas Biossensoriais/métodos , Malonil Coenzima A/análise , Engenharia Metabólica/métodos , Microrganismos Geneticamente Modificados , Malonil Coenzima A/genética , Malonil Coenzima A/metabolismo , Microrganismos Geneticamente Modificados/genética , Microrganismos Geneticamente Modificados/metabolismoRESUMO
Microbial strain improvement through adaptive laboratory evolution (ALE) has been a key strategy in biotechnology for enhancing desired phenotypic traits. In this Biotech Method paper, we present an accelerated ALE (aALE) workflow and its successful implementation in evolving Cupriavidus necator H16 for enhanced tolerance toward elevated glycerol concentrations. The method involves the deliberate induction of genetic diversity through controlled exposure to divalent metal cations, enabling the rapid identification of improved variants. Through this approach, we observed the emergence of robust variants capable of growing in high glycerol concentration environments, demonstrating the efficacy of our aALE workflow. When cultivated in 10% v/v glycerol, the adapted variant Mn-C2-B11, selected through aALE, achieved a final OD600 value of 56.0 and a dry cell weight of 15.2 g L-1, compared to the wild type (WT) strain's final OD600 of 39.1 and dry cell weight of 8.4 g L-1. At an even higher glycerol concentration of 15% v/v, Mn-C2-B11 reached a final OD600 of 48.9 and a dry cell weight of 12.7 g L-1, in contrast to the WT strain's final OD600 of 9.0 and dry cell weight of 3.1 g L-1. Higher glycerol consumption by Mn-C2-B11 was also confirmed by high-performance liquid chromatography (HPLC) analysis. This adapted variant consumed 34.5 times more glycerol compared to the WT strain at 10% v/v glycerol. Our method offers several advantages over other reported ALE approaches, including its independence from genetically modified strains, specialized genetic tools, and potentially carcinogenic DNA-modifying agents. By utilizing divalent metal cations as mutagens, we offer a safer, more efficient, and cost-effective alternative for expansion of genetic diversity. With its ability to foster rapid microbial evolution, aALE serves as a valuable addition to the ALE toolbox, holding significant promise for the advancement of microbial strain engineering and bioprocess optimization.
Assuntos
Cupriavidus necator , Glicerol , Cupriavidus necator/genética , Cupriavidus necator/metabolismo , Glicerol/metabolismo , Glicerol/química , Cátions Bivalentes , Evolução Molecular Direcionada/métodosRESUMO
Understanding the effects of organic co-solvents on protein structure and function is pivotal to engineering enzymes for biotransformation in non-aqueous solvents. The effects of DMSO on the catalytic activity of cytochrome P450 BM3 have previously been investigated and the importance of Phe87 in its organic co-solvent tolerance was identified. To probe the DMSO inactivation mechanism and the functional role of Phe87 in modulating the organic co-solvent tolerance of P450 BM3, the haem domain (Thr1-Leu455) of the F87A variant was cocrystallized in the presence of 14%(v/v) and 28%(v/v) DMSO. At both DMSO concentrations the protein retained the canonical structure of the P450 haem domain without any sign of partial or global unfolding. Interestingly, a DMSO molecule was found in the active site of both structures, with its O atom pointing towards the haem iron. The orientation of the DMSO molecule indicated a dynamic coordination process that was in competition with the active-site water molecule. The ability of the DMSO molecule to coordinate the haem iron is plausibly the main reason why P450 BM3 is inactivated at elevated DMSO concentrations. The data allowed an interesting comparison with the wild-type structures reported previously. A DMSO molecule was found when the wild-type protein was placed in 28%(v/v) DMSO, in which the DMSO molecule coordinated the haem iron directly via its S atom. Intriguingly, no DMSO molecule was observed at 14%(v/v) DMSO for the wild-type structure. These results suggested that the bulky phenyl side chain of Phe87 protects the haem from being accessed by the DMSO molecule and explains the higher tolerance of the wild-type enzyme towards organic co-solvents compared with its F87A variant.
Assuntos
Domínio Catalítico , Sistema Enzimático do Citocromo P-450/química , Dimetil Sulfóxido/química , Sistema Enzimático do Citocromo P-450/metabolismo , Humanos , Modelos Moleculares , Especificidade por SubstratoRESUMO
PTO-QuickStep is a quick and easy molecular cloning technique that allows seamless point integration of a DNA fragment, encoding either a tag or a protein, into any position within a target plasmid. The entire process is conducted in a time-efficient and cost-effective manner, without the need of DNA gel purification and enzymatic restriction and ligation. PTO-QuickStep further innovates protein engineering by providing the possibility of integrating a random mutagenesis step (e.g., error-prone PCR) into the workflow, without compromising the time duration required. Random mutagenesis libraries can be quickly and efficiently cloned into a plasmid of interest, thereby accelerating directed evolution. On top of that, PTO-QuickStep can be utilized for rapid integration of noncoding DNA fragments to modify existing plasmids, making it an excellent tool for synthetic biologists.
Assuntos
Clonagem Molecular , DNA , Biblioteca Gênica , DNA/genética , Mutagênese , Plasmídeos/genética , Reação em Cadeia da Polimerase/métodosRESUMO
The accumulation of emerging pollutants in the environment remains a major concern as evidenced by the increasing number of reports citing their potential risk on environment and health. Hence, removal strategies of such pollutants remain an active area of investigation. One way through which emerging pollutants can be eliminated from the environment is by enzyme-mediated bioremediation. Enzyme-based degradation can be further enhanced via advanced protein engineering approaches. In the present study a sensitive and robust bioanalytical liquid chromatography-tandem mass spectrometry (LCMSMS)-based approach was used to investigate the ability of a fungal dye decolorizing peroxidase 4 (DyP4) and two of its evolved variants-that were previously shown to be H2O2 tolerant-to degrade a panel of 15 different emerging pollutants. Additionally, the role of a redox mediator was examined in these enzymatic degradation reactions. Our results show that three emerging pollutants (2-mercaptobenzothiazole (MBT), paracetamol, and furosemide) were efficiently degraded by DyP4. Addition of the redox mediator had a synergistic effect as it enabled complete degradation of three more emerging pollutants (methyl paraben, sulfamethoxazole and salicylic acid) and dramatically reduced the time needed for the complete degradation of MBT, paracetamol, and furosemide. Further investigation was carried out using pure MBT to study its degradation by DyP4. Five potential transformation products were generated during the enzymatic degradation of MBT, which were previously reported to be produced during different bioremediation approaches. The current study provides the first instance of the application of fungal DyP4 peroxidases in bioremediation of emerging pollutants.
Assuntos
Recuperação e Remediação Ambiental/métodos , Peroxidases/metabolismo , Pleurotus/enzimologia , Biodegradação Ambiental , Cromatografia Líquida/métodos , Poluentes Ambientais , Proteínas Fúngicas/metabolismo , Fungos/metabolismo , Peróxido de Hidrogênio , Oxirredução , Peroxidases/fisiologia , Pleurotus/metabolismo , Espectrometria de Massas em Tandem/métodos , Poluentes Químicos da Água/químicaRESUMO
Starch-rich by-products could be efficiently exploited for polyhydroxyalkanoates (PHAs) production. Unfortunately, Cupriavidus necator DSM 545, one of the most efficient PHAs producers, is not able to grow on starch. In this study, a recombinant amylolytic strain of C. necator DSM 545 was developed for the one-step PHAs production from starchy residues, such as broken rice and purple sweet potato waste. The glucodextranase G1d from Arthrobacter globiformis I42 and the α-amylase amyZ from Zunongwangia profunda SM-A87 were co-expressed into C. necator DSM 545. The recombinant C. necator DSM 545 #11, selected for its promising hydrolytic activity, produced high biomass levels with noteworthy PHAs titers: 5.78 and 3.65 g/L from broken rice and purple sweet potato waste, respectively. This is the first report on the engineering of C. necator DSM 545 for efficient amylase production and paves the way to the one-step conversion of starchy waste into PHAs.
Assuntos
Cupriavidus necator , Poli-Hidroxialcanoatos , Biomassa , Cupriavidus necator/genética , AmidoRESUMO
Human mitochondrial transcription factor A (TFAM) is a multi-functional protein, involved in different aspects of maintaining mitochondrial genome integrity. In this report, we characterized TFAM and its interaction with tumor suppressor p53 using various biophysical methods. DNA-free TFAM is a thermally unstable protein that is in equilibrium between monomers and dimers. Self-association of TFAM is modulated by its basic C-terminal tail. The DNA-binding ability of TFAM is mainly contributed by its first HMG-box, while the second HMG-box has low-DNA-binding capability. We also obtained backbone resonance assignments from the NMR spectra of both HMG-boxes of TFAM. TFAM binds primarily to the N-terminal transactivation domain of p53, with a K(d) of 1.95 +/- 0.19 microM. The C-terminal regulatory domain of p53 provides a secondary binding site for TFAM. The TFAM-p53-binding interface involves both TAD1 and TAD2 sub-domains of p53. Helices alpha1 and alpha2 of the HMG-box constitute the main p53-binding region. Since both TFAM and p53 binds preferentially to distorted DNA, the TFAM-p53 interaction is implicated in DNA damage and repair. In addition, the DNA-binding mechanism of TFAM and biological relevance of the TFAM-p53 interaction are discussed.
Assuntos
Proteínas de Ligação a DNA/metabolismo , Proteínas Mitocondriais/metabolismo , Fatores de Transcrição/metabolismo , Proteína Supressora de Tumor p53/metabolismo , Linhagem Celular , Proteínas de Ligação a DNA/química , Proteína HMGB1/metabolismo , Proteína HMGB2/metabolismo , Humanos , Espectroscopia de Ressonância Magnética , Proteínas Mitocondriais/química , Multimerização Proteica , Estrutura Terciária de Proteína , Fatores de Transcrição/químicaRESUMO
Single-stranded DNA-binding proteins (SSB) form a class of proteins that bind preferentially single-stranded DNA with high affinity. They are involved in DNA metabolism in all organisms and serve a vital role in replication, recombination and repair of DNA. In this report, we identify human mitochondrial SSB (HmtSSB) as a novel protein-binding partner of tumour suppressor p53, in mitochondria. It binds to the transactivation domain (residues 1-61) of p53 via an extended binding interface, with dissociation constant of 12.7 (+/- 0.7) microM. Unlike most binding partners reported to date, HmtSSB interacts with both TAD1 (residues 1-40) and TAD2 (residues 41-61) subdomains of p53. HmtSSB enhances intrinsic 3'-5' exonuclease activity of p53, particularly in hydrolysing 8-oxo-7,8-dihydro-2'-deoxyguanosine (8-oxodG) present at 3'-end of DNA. Taken together, our data suggest that p53 is involved in DNA repair within mitochondria during oxidative stress. In addition, we characterize HmtSSB binding to ssDNA and p53 N-terminal domain using various biophysical measurements and we propose binding models for both.
Assuntos
DNA de Cadeia Simples/metabolismo , Proteínas de Ligação a DNA/metabolismo , Proteínas Mitocondriais/metabolismo , Proteína Supressora de Tumor p53/metabolismo , 8-Hidroxi-2'-Desoxiguanosina , Sítios de Ligação , Linhagem Celular Tumoral , DNA Polimerase gama , DNA Polimerase Dirigida por DNA/metabolismo , Desoxiguanosina/análogos & derivados , Desoxiguanosina/metabolismo , Exodesoxirribonucleases/metabolismo , Humanos , Ligação Proteica , Estabilidade Proteica , Estrutura Terciária de Proteína , Temperatura , Proteína Supressora de Tumor p53/químicaRESUMO
Signal peptides and secretory carrier proteins are commonly used to secrete heterologous recombinant protein in Gram-negative bacteria. The Escherichia coli osmotically-inducible protein Y (OsmY) is a carrier protein that secretes a target protein extracellularly, and we have previously applied it in the Bacterial Extracellular Protein Secretion System (BENNY) to accelerate directed evolution. In this study, we reported the first application of random and combinatorial mutagenesis on a carrier protein to enhance total secretory target protein production. After one round of random mutagenesis followed by combining the mutations found, OsmY(M3) (L6P, V43A, S154R, V191E) was identified as the best carrier protein. OsmY(M3) produced 3.1 ± 0.3 fold and 2.9 ± 0.8 fold more secretory Tfu0937 ß-glucosidase than its wildtype counterpart in E. coli strains BL21(DE3) and C41(DE3), respectively. OsmY(M3) also produced more secretory Tfu0937 at different cultivation temperatures (37 °C, 30 °C and 25 °C) compared to the wildtype. Subcellular fractionation of the expressed protein confirmed the essential role of OsmY in protein secretion. Up to 80.8 ± 12.2% of total soluble protein was secreted after 15 h of cultivation. When fused to a red fluorescent protein or a lipase from Bacillus subtillis, OsmY(M3) also produced more secretory protein compared to the wildtype. In this study, OsmY(M3) variant improved the extracellular production of three proteins originating from diverse organisms and with diverse properties, clearly demonstrating its wide-ranging applications. The use of random and combinatorial mutagenesis on the carrier protein demonstrated in this work can also be further extended to evolve other signal peptides or carrier proteins for secretory protein production in E. coli.
Assuntos
Sistemas de Secreção Bacterianos/metabolismo , Proteínas de Escherichia coli/metabolismo , Escherichia coli/genética , Escherichia coli/metabolismo , Mutagênese , Proteínas Periplásmicas de Ligação/metabolismo , Via Secretória/genética , Bacillus subtilis/enzimologia , Proteínas de Escherichia coli/genética , Lipase/genética , Lipase/metabolismo , Proteínas Luminescentes/genética , Proteínas Luminescentes/metabolismo , Microrganismos Geneticamente Modificados , Taxa de Mutação , Proteínas Periplásmicas de Ligação/genética , Sinais Direcionadores de Proteínas/genética , Transporte Proteico/genética , Proteínas Recombinantes de Fusão/metabolismo , Temperatura , Thermobifida/enzimologia , beta-Glucosidase/genética , beta-Glucosidase/metabolismo , Proteína Vermelha FluorescenteRESUMO
Carboxylic acids (CAs) are widespread in Nature. A prominent example is fatty acids, a major constituent of lipids. CAs are potentially economical precursors for bio-based products such as bio-aldehydes and bio-alcohols. However, carboxylate reduction is a challenging chemical transformation due to the thermodynamic stability of carboxylate. Carboxylic acid reductases (CARs), found in bacteria and fungi, offer a good solution to this challenge. These enzymes catalyse the NADPH- and ATP-dependent reduction of aliphatic and aromatic CAs. This review summarised all the protein engineering work that has been done on these versatile biocatalysts to date. The intricate catalytic mechanism and structure of CARs prompted us to first examine their domain architecture to facilitate the subsequent discussion of various protein engineering strategies. This then led to a survey of assays to detect aldehyde formation and to monitor aldenylation activity. Strategies for NADPH and ATP regeneration were also incorporated, as they are deemed vital to developing preparative-scale biocatalytic process and high-throughput screening systems. The objectives of the review are to consolidate CAR engineering research, stimulate interest, discussion or debate, and advance the field of bioreduction.
Assuntos
Ácidos Carboxílicos/metabolismo , Oxirredutases/genética , Engenharia de Proteínas/métodos , Trifosfato de Adenosina/metabolismo , Proteínas de Bactérias/genética , Proteínas de Bactérias/metabolismo , Biocatálise , Proteínas Fúngicas/genética , Proteínas Fúngicas/metabolismo , NADP/metabolismo , Oxirredutases/metabolismoRESUMO
BACKGROUND: Dye-decolorizing peroxidases (DyPs) are haem-containing peroxidases that show great promises in industrial biocatalysis and lignocellulosic degradation. Through the use of Escherichia coli osmotically-inducible protein Y (OsmY) as a bacterial extracellular protein secretion system (BENNY), we successfully developed a streamlined directed evolution workflow to accelerate the protein engineering of DyP4 from Pleurotus ostreatus strain PC15. RESULT: After 3 rounds of random mutagenesis with error-prone polymerase chain reaction (epPCR) and 1 round of saturation mutagenesis, we obtained 4D4 variant (I56V, K109R, N227S and N312S) that displays multiple desirable phenotypes, including higher protein yield and secretion, higher specific activity (2.7-fold improvement in k cat/K m) and higher H2O2 tolerance (sevenfold improvement based on IC50). CONCLUSION: To our best knowledge, this is the first report of applying OsmY to simplify the directed evolution workflow and to direct the extracellular secretion of a haem protein such as DyP4.
RESUMO
Well-characterized promoters with variable strength form the foundation of heterologous pathway optimization. It is also a key element that bolsters the success of microbial engineering and facilitates the development of biological tools like biosensors. In comparison to microbial hosts such as Escherichia coli and Saccharomyces cerevisiae, the promoter repertoire of Cupriavidus necator H16 is highly limited. This limited number of characterized promoters poses a significant challenge during the engineering of C. necator H16 for biomanufacturing and biotechnological applications. In this article, we first examined the architecture and genetic elements of the four most widely used constitutive promoters of C. necator H16 (i.e., P phaC1, P rrsC, P j5, and P g25) and established a narrow 6-fold difference in their promoter activities. Next, using these four promoters as starting points and applying a range of genetic modifications (including point mutation, length alteration, incorporation of regulatory genetic element, promoter hybridization, and configuration alteration), we created a library of 42 constitutive promoters, all of which are functional in C. necator H16. Although these promoters are also functional in E. coli, they show different promoter strength and hierarchical rank of promoter activity. Subsequently, the activity of each promoter was individually characterized, using l-arabinose-inducible P BAD promoter as a benchmark. This study has extended the range of constitutive promoter activities to 137-fold, with some promoter variants exceeding the l-arabinose-inducible range of P BAD promoter. Not only has the work enhanced our flexibility in engineering C. necator H16, it presented novel strategies in adjusting promoter activity in C. necator H16 and highlighted similarities and differences in transcriptional activity between this organism and E. coli.
Assuntos
Escherichia coli/genética , Biologia Sintética/métodos , Proteínas de Bactérias/genética , Cupriavidus necator/genética , Plasmídeos/genética , Regiões Promotoras Genéticas/genéticaRESUMO
We have developed a statistical method named MAP (mutagenesis assistant program) to equip protein engineers with a tool to develop promising directed evolution strategies by comparing 19 mutagenesis methods. Instead of conventional transition/transversion bias indicators as benchmarks for comparison, we propose to use three indicators based on the subset of amino acid substitutions generated on the protein level: (1) protein structure indicator; (2) amino acid diversity indicator with a codon diversity coefficient; and (3) chemical diversity indicator. A MAP analysis for a single nucleotide substitution was performed for four genes: (1) heme domain of cytochrome P450 BM-3 from Bacillus megaterium (EC 1.14.14.1); (2) glucose oxidase from Aspergillus niger (EC 1.1.3.4); (3) arylesterase from Pseudomonas fluorescens (EC 3.1.1.2); and (4) alcohol dehydrogenase from Saccharomyces cerevisiae (EC 1.1.1.1). Based on the MAP analysis of these four genes, 19 mutagenesis methods have been evaluated and criteria for an ideal mutagenesis method have been proposed. The statistical analysis showed that existing gene mutagenesis methods are limited and highly biased. An average amino acid substitution per residue of only 3.15-7.4 can be achieved with current random mutagenesis methods. For the four investigated gene sequences, an average fraction of amino acid substitutions of 0.5-7% results in stop codons and 4.5-23.9% in glycine or proline residues. An average fraction of 16.2-44.2% of the amino acid substitutions are preserved, and 45.6% (epPCR method) are chemically different. The diversity remains low even when applying a non-biased method: an average of seven amino acid substitutions per residue, 2.9-4.7% stop codons, 11.1-16% glycine/proline residues, 21-25.8% preserved amino acids, and 55.5% are amino acids with chemically different side-chains. Statistical information for each mutagenesis method can further be used to investigate the mutational spectra in protein regions regarded as important for the property of interest.
Assuntos
Evolução Molecular Direcionada/métodos , Mutagênese , Proteínas/genética , Substituição de Aminoácidos , Códon/genética , Modelos Genéticos , Modelos Moleculares , Estrutura Terciária de Proteína , Proteínas/químicaRESUMO
QuickStep-Cloning is a novel molecular cloning technique that builds upon the concepts of asymmetric PCR and megaprimer-based amplification of whole plasmid. It was designed specifically to address the major drawbacks of previously reported cloning methods. The fully optimized protocol allows for a seamless integration of a long DNA fragment into any position within a plasmid of choice, in a time-efficient and cost-effective manner, without the need of a tedious DNA gel purification, a restriction digestion, and an enzymatic ligation. QuickStep-Cloning can be completed in less than 6 h, significantly faster than most of the existing cloning methods, while retaining high efficiency.