Effects of strength training on the biomechanics and coordination of short-term maximal cycling.

The aim was to investigate the effects of a gym-based strength training intervention on biomechanics and intermuscular coordination patterns during short-term maximal cycling. Twelve track sprint cyclists performed 3 × 4 s seated sprints at 135 rpm, interspersed with 2 × 4 s seated sprints at 60 rpm on an isokinetic ergometer, repeating the session 11.6 ± 1.4 weeks later following a training programme that included two gym-based strength training sessions per week. Joint moments were calculated via inverse dynamics, using pedal forces and limb kinematics. EMG activity was measured for 9 lower limb muscles. Track cyclists 'leg strength" increased (7.6 ± 11.9 kg, P = 0.050 and ES = 0.26) following the strength training intervention. This was accompanied by a significant increase in crank power over a complete revolution for sprints at 135 rpm (26.5 ± 36.2 W, P = 0.028 and ES = 0.29). The increase in leg strength and average crank power was associated with a change in biceps femoris muscle activity, indicating that the riders successfully adapted their intermuscular coordination patterns to accommodate the changes in personal constraints to increase crank power.

Determination and Prediction of Zinc Speciation in Estuaries.

Lowering of the estuarine Environmental Quality Standard for zinc in the UK to 121 nM reflects rising concern regarding zinc in ecosystems and is driving the need to better understand its fate and behavior and to develop and parametrize speciation models to predict the metal species present. For the first time, an extensive data set has been gathered for the speciation of zinc within an estuarine system with supporting physicochemical characterization, in particular dissolved organic carbon. WHAM/Model VII and Visual MINTEQ speciation models were used to simulate zinc speciation, using a combination of measured complexation variables and available defaults. Data for the five estuarine transects from freshwater to seawater endmembers showed very variable patterns of zinc speciation depending on river flows, seasons, and potential variations in metal and ligand inputs from in situ and ex situ sources. There were no clear relationships between free zinc ion concentration [Zn2+] and measured variables such as DOC concentration, humic and biological indices. Simulations of [Zn2+] carried out with both models at high salinities or by inputting site specific complexation capacities were successful, but overestimated [Zn2+] in low salinity waters, probably owing to an underestimation of the complexation strength of the ligands present. Uncertainties in predicted [Zn2+] are consistently smaller than standard deviations of the measured values, suggesting that the accuracy of the measurements is more critical than model uncertainty in evaluating the predictions.

Predicting Copper Speciation in Estuarine Waters-Is Dissolved Organic Carbon a Good Proxy for the Presence of Organic Ligands?

A new generation of speciation-based aquatic environmental quality standards (EQS) for metals have been developed using models to predict the free metal ion concentration, the most ecologically relevant form, to set site-specific values. Some countries such as the U.K. have moved toward this approach by setting a new estuarine and marine water EQS for copper, based on an empirical relationship between copper toxicity to mussels (Mytilus sp.) and ambient dissolved organic carbon (DOC) concentrations. This assumes an inverse relationship between DOC and free copper ion concentration owing to complexation by predominantly organic ligands. At low DOC concentrations, the new EQS is more stringent, but above 162 µM DOC it is higher than the previous value. However, the relationship between DOC and copper speciation is poorly defined in estuarine waters. This research discusses the influence of DOC from different sources on copper speciation in estuaries and concludes that DOC is not necessarily an accurate predictor of copper speciation. Nevertheless, the determination of ligand strength and concentrations by Competitive Ligand Exchange Adsorptive Cathodic Stripping Voltammetry enabled the prediction of the free metal ion concentration within an order of magnitude for estuarine waters by using a readily available metal speciation model (Visual MINTEQ).

The Reliability of Functional Movement Screening and In-Season Changes in Physical Function and Performance Among Elite Rugby League Players.

This study aimed to (a) assess the reliability of the functional movement screening (FMS) protocol and (b) to establish changes in both FMS and tests of physical performance throughout a season. The reliability of the FMS components (12 in total) was assessed through a nonparametric statistical approach, based on 2 trials, separated by 1 week. Score on the FMS, strength (3 repetition maximum full squat, 1 repetition maximum [1 RM] bench press), running speed (10 and 40 m), and jump height of 12 elite male under-19 rugby league players was monitored at pre-, mid-, and late-season periods. There was no bias (p > 0.05) found between trials for the FMS, with the majority of components reaching 100% "perfect agreement," reflecting the good reliability of the FMS tool. There were no effects (p > 0.05) of season stage on any of the FMS components; however, an improvement (p ≤ 0.05) between the pre- and both mid- and late-season periods was apparent in every component of fitness, such as 1 RM bench press (112.92 ± 24.54 kg; 125.83 ± 21.41 kg; 125.98 ± 24.48 kg) and 40-m sprint time (5.69 ± 0.35 seconds; 5.62 ± 0.31 seconds; 5.64 ± 0.27 seconds). Our findings demonstrate that the FMS can be reliably administered to elite rugby league players but will not change in accordance with physical performance across a competitive season. Our findings should not necessarily deter practitioners from using the FMS but begin to question the specific qualities that are being assessed through its administration.

Combined uncertainty estimation for the determination of the dissolved iron amount content in seawater using flow injection with chemiluminescence detection.

This work assesses the components contributing to the combined uncertainty budget associated with the measurement of the Fe amount content by flow injection chemiluminescence (FI-CL) in <0.2 µm filtered and acidified seawater samples. Amounts of loaded standard solutions and samples were determined gravimetrically by differential weighing. Up to 5% variations in the loaded masses were observed during measurements, in contradiction to the usual assumptions made when operating under constant loading time conditions. Hence signal intensities (V) were normalised to the loaded mass and plots of average normalised intensities (in V kg-1) vs. values of the Fe amount content (in nmol kg-1) added to a "low level" iron seawater matrix were used to produce the calibration graphs. The measurement procedure implemented and the uncertainty estimation process developed were validated from the agreement obtained with consensus values for three SAFe and GEOTRACES reference materials (D2, GS, and GD). Relative expanded uncertainties for peak height and peak area based results were estimated to be around 12% and 10% (coverage factor k = 2), respectively. The most important contributory factors were the uncertainty on the sensitivity coefficient (i.e., calibration slope) and the within-sequence-stability (i.e., the signal stability over several hours of operation; here 32 h). For GD, using peak height measurements, these factors contributed respectively 69.7% and 21.6% while the short-term repeatability accounted for only 7.9%. Therefore, an uncertainty estimation based on the intensity repeatability alone, as is often done in FI-CL studies, is not a realistic estimation of the overall uncertainty of the procedure.

A three-season comparison of match performances among selected and unselected elite youth rugby league players.

This study compared technical actions, movements, heart rates and perceptual responses of selected and unselected youth rugby league players during matches (under-15 to under-17 age groups). The players' movements and heart rates were assessed using 5 Hz Global Positioning Systems (GPSs), while their technical actions were analysed using video analysis. The maturity of each player was predicted before each season for statistical control. There were no differences (P > 0.05) between selected and unselected players in the under-15 or the under-17 age group for any variables. However, in the under-16 age group, the selected players (57.1 ± 11.9 min) played for longer than the unselected players (44.1 ± 12.3 min; P = 0.017; ES = 1.08 ± CI = 0.87), and covered more distance (5181.0 ± 1063.5 m cf. 3942.6 ± 1108.6 m, respectively; P = 0.012; ES = 1.14 ± CI = 0.88) and high-intensity distance (1808.8 ± 369.3 m cf. 1380.5 ± 367.7 m, respectively; P = 0.011; ES = 1.16 ± CI = 0.88). Although successful carries per minute was higher in the selected under-15 age group, there were no other differences (P > 0.05) in match performance relative to playing minutes between groups. Controlling for maturity, the less mature, unselected players from the under-16 age group performed more high-intensity running (P < 0.05). Our findings question the use of match-related measurements in differentiating between selected and unselected players, showing that later maturing players were unselected, even when performing greater high-intensity running during matches.

The relationship between physical abilities, ball-carrying and tackling among elite youth rugby league players.

This study investigated the relationship between the physical abilities of adolescent rugby league players and tackling and ball-carrying skills performed during matches, across three seasons (under-15 to under-17). The players were measured each season for acceleration (10-30 m), peak and mean speed (10-30 m), sprinting force (10-30 m), aerobic power, counter-movement jump (CMJ) height and jumping power. The matches were filmed and analysed for ball-carrying and tackling frequency per minute (successful and unsuccessful outcomes). There were strong relationships between successful carries∙min(-1) and 10 m force in the under-15 (R = 0.61, P < 0.001), under-16 (R = 0.69, P < 0.001) and under-17 groups (R = 0.64, P < 0.001). There were also strong and moderate relationships between predicted vertical power and successful carries∙min(-1) in the under-15 (R = 0.63, P = 0.011) and under-17 group (R = 0.40, P = 0.030), respectively. There were no relationships between carries or tackles and any other performance indicators. These findings suggest that acceleration, in accordance with gains in body mass, support ball-carrying but not tackling performance. Performance measurements, such as CMJ or aerobic power, do not support ball-carrying ability among youth rugby league players.

Changes in anthropometry and performance, and their interrelationships, across three seasons in elite youth rugby league players.

This study investigated the changes in anthropometry and performance, and their interrelationships, across 3 consecutive seasons (under-15 to under-17 age groups) in elite youth rugby league players. Each player participated in annual anthropometrical and performance assessments, comprising measurements of stature; body mass; limb lengths and circumference; skinfolds; predicted muscle cross-sectional area (CSA); 20-m speed, countermovement jump height, vertical power, and aerobic power. Lean body mass percentage changed (p ≤ 0.05) between the under-15 (70.9 ± 5.9%), under-16 (72.0 ± 5.8%), and the under-17 age groups (74.1 ± 5.7%). Likewise, predicted quadriceps muscle CSA also changed (p ≤ 0.05) between each age group (under-15 = 120.9 ± 37.8 cm; under-16 = 133.2 ± 36.0 cm; under-17 = 154.8 ± 28.3 cm). Concomitant changes between the under-15 and under-16 groups were found for 20-m speed (3.5 ± 0.1 cf. 3.4 ± 0.2 seconds; p = 0.008) and predicted jumping power (3,611.3 ± 327.3 W cf. 4,081.5 ± 453.9 W; p = 0.003). Both lean body mass and quadriceps muscle CSA consistently, related to both 20-m sprint time and jumping power, with r values ranging between -0.39 and -0.63 (20-m sprint time) and 0.55 to 0.75 (jumping power). Our findings demonstrate the importance of gains in lean body mass across later adolescence that support the ability to generate horizontal speed and predicted vertical power. This information informs the expectations and subsequent training programs of elite rugby league practitioners.

The movement characteristics of English Premiership rugby union players.

The purpose of this investigation was to quantify the movement characteristics of elite rugby union players during competitive play and identify whether position-related differences exist. Ninety-eight elite players from eight English Premiership Clubs were tracked using global positioning systems (GPS) during 44 competitive matches throughout the 2010/2011 season. Player positions were defined as: (1) backs or forwards; (2) front, second and back rows, scrum half, inside and outside backs; (3) 15 individual positions (numbers 1-15). Analysis revealed the game is predominantly played at low speeds with little distance covered 'sprinting' by either the backs (50 ± 76 m) or the forwards (37 ± 64 m). The backs travelled greater (P < 0.05) absolute and relative distances than the forwards. The scrum half covered the greatest total distance during a match (7098 ± 778 m) and the front row the least (5158 ± 200 m). The back row covered the greatest distances at 'sprinting' speeds, particularly the number 8 position (77 m). These findings reflect notable differences in the movement characteristics displayed by elite rugby union players in specific positional roles, and reinforce the contemporary view that training programmes for such players ought to be structured with this in mind.

Temporal variability in nutrient concentrations and loads in the River Tamar and its catchment (SW England) between 1974 and 2004.

This study reports the results from the analyses of a 30-year (1974-2004) river water quality monitoring dataset for NO x -N (NO3-N + NO2-N), NH4-N, PO4-P and SiO2-Si at the tidal limit of the River Tamar (SW England), an agriculturally dominated and sparsely populated catchment. Annual mean concentrations of NH4-N, PO4-P and SiO2-Si were similar to other rural UK rivers, while annual mean concentrations of NO x -N were clearly lower. Estimated values for the 1940s were much lower than for those of post-1974, at least for NO3-N and PO4-P. Flow-weighted mean concentrations of PO4-P decreased by approximately 60 % between 1974 and 2004, although this change cannot be unequivocally ascribed to either PO4-P stripping from sewage treatment work effluents or reductions in phosphate fertiliser applications. Lower-resolution sampling (to once per month) in the late 1990s may also have led to the apparent decline; a similar trend was also seen for NH4-N. There were no temporal trends in the mean concentrations of NO x -N, emphasising the continuing difficulty in controlling diffuse pollution from agriculture. Concentrations of SiO2-Si and NO x -N were significantly and positively correlated with river flows ≤15 m(3) s(-1), showing that diffuse inputs from the catchment were important, particularly during the wet winter periods. In contrast, concentrations of PO4-P and NH4-N did not correlate across any flow window, despite the apparent importance of diffuse inputs for these constituents. This observation, coupled with the absence of a seasonal (monthly) cycle for these nutrients, indicates that, for PO4-P and NH4-N, there were no dominant sources and/or both undergo extensive within-catchment processing. Analyses of nutrient fluxes reveal net losses for NO3-N and SiO2-Si during the non-winter months; for NO3-N, this may be due to denitrification. Areal fluxes of NO x -N from the catchment were towards the higher end of the range for the UK, while NH4-N and PO4-P were closer to the lower end of the ranges for these nutrients. These data, taken together with information on sestonic chlorophyll a, suggest that water quality in the lower River Tamar is satisfactory with respect to nutrients. Analyses of these monitoring data, which were collected at considerable logistical and monetary cost, have revealed unique insights into the environmental behaviour of key nutrients within the Tamar catchment over a 30-year period.

Biomechanical measures of short-term maximal cycling on an ergometer: a test-retest study.

An understanding of test-retest reliability is important for biomechanists, such as when assessing the longitudinal effect of training or equipment interventions. Our aim was to quantify the test-retest reliability of biomechanical variables measured during short-term maximal cycling. Fourteen track sprint cyclists performed 3 × 4 s seated sprints at 135 rpm on an isokinetic ergometer, repeating the session 7.6 ± 2.5 days later. Joint moments were calculated via inverse dynamics, using pedal forces and limb kinematics. EMG activity was measured for 9 lower limb muscles. Reliability was explored by quantifying systematic and random differences within- and between-session. Within-session reliability was better than between-sessions reliability. The test-retest reliability level was typically moderate to excellent for the biomechanical variables that describe maximal cycling. However, some variables, such as peak knee flexion moment and maximum hip joint power, demonstrated lower reliability, indicating that care needs to be taken when using these variables to evaluate biomechanical changes. Although measurement error (instrumentation error, anatomical marker misplacement, soft tissue artefacts) can explain some of our reliability observations, we speculate that biological variability may also be a contributor to the lower repeatability observed in several variables including ineffective crank force, ankle kinematics and hamstring muscles' activation patterns.

Evaluation of electrospray ionisation mass spectrometry as a technique for the investigation of competitive interactions: a case study of the ternary Th-Mn-EDTA system.

RATIONALE: Electrospray ionisation mass spectrometry (ESI-MS) is a useful tool for exploring the speciation of solution-phase metal complexes; however, the quantification of ternary systems is challenging due to the differences in the electrospray response of different species. Here, the Th-Mn-EDTA system was investigated to evaluate the capability of ESI-MS for quantifying the species present. METHODS: Increasingly complex mixtures of Th(IV), Mn(II) and EDTA were analysed using manual flow injection of samples into an HPLC grade water mobile phase delivered to an ion trap mass spectrometer fitted with an ESI interface (ThermoQuest Finnigan Mat LCQ). Mass spectra were obtained in the positive and negative ion modes over a mass-to-charge (m/z) range from 50-2000. RESULTS: The instrumental response to EDTA was affected by the addition of Th(NO(3))(4) but not MnCl(2), while the response to both Th-EDTA and Mn-EDTA species was affected by addition of the other metal salt. Internal standards were also found to suppress signals to different extents. Therefore, each signal suppression was carefully quantified as the solution became more complex, and signal correction factors were used in conjunction with regular external calibration. Mixed metal signals were quantified adequately. CONCLUSIONS: This study showed the complexity of quantifying a ternary system involving different co-existing species. Nonetheless, the step-wise protocol developed provided quantitative data on the displacement of Mn from its EDTA complex by Th.

Mobilization of technetium from reduced sediments under seawater inundation and intrusion scenarios.

Predicted sea level rise would increase the vulnerability of low lying coastal legacy nuclear sites to inundation and intrusion with oxygenated seawater. This could have a significant impact on the mobility of redox-sensitive radionuclides such as Tc. Here, batch and column experiments were used to simulate and investigate the effect of these processes on the mobilization of Tc from sediments under a range of geochemically reduced conditions. Batch experiments showed that only a small proportion of Tc was rapidly (within 5 days) released from the sediments into seawater and groundwater. The subsequent Tc release was slowest and ultimately limited to the greatest extent (17%) in initially Fe-reducing sediments, when they were reoxidized in seawater. Thus, the cycling of iron and the impact of the water chemistry on iron mineralogy were important for hindering Tc release. Column experiments showed that iron minerals were less effective at retarding Tc release under flow-through conditions. Kinetically controlled and solubility limited Fe dissolution led to ongoing Tc release from the sediments; i.e. the retarding effect of iron phases was temporary, and significantly more Tc was mobilized (79-93%) compared with the batch experiments (17-45%). These results demonstrate the potential for Tc(IV) to be oxidized and mobilized from sediments at coastal nuclear sites resulting from predicted intrusion and inundation with oxic seawater.

Determination of nitrate and nitrite in freshwaters using flow-injection with luminol chemiluminescence detection.

A simple and sensitive flow-injection (FI) method for the determination of nitrate and nitrite in natural waters, based on luminol chemiluminescence (CL) detection, is reported. Nitrate was reduced online to nitrite via a copperized cadmium (Cu-Cd) column and then reacted with acidic hydrogen peroxide to form peroxynitrous acid. CL emission was observed from the oxidation of luminol in an alkaline medium in the presence of the peroxynitrite anion. The limits of detection (S:N = 3) were 0.02 and 0.01 µg N/L, with sample throughputs of 40 and 90 /h for nitrate and nitrite, respectively. Calibration graphs were linear over the range 0.02-50 and 0.01-50 µg N/L [R2 = 0.9984 (n = 8) and R2 = 0.9965 (n = 7)] for nitrate and nitrite, respectively, with relative standard deviations (RSDs; n = 3) in the range 1.8-4.6%. The key chemical and physical variables (reagent concentrations, buffer pH, flow rates, sample volume, Cu-Cd reductor column length) were optimized and potential interferences investigated. The effect of cations [Ca(II), Mg(II), Co(II), Fe(II) and Cu(II)] was masked online with EDTA. Common anions (PO4(3-) , SO4(2-) and HCO3-) did not interfere at their maximum admissible concentrations in freshwaters. The effect of salinity on the luminol CL reaction with and without nitrate and nitrite (2 and 0.5 µg N/L, respectively) was also investigated. The method was successfully applied to freshwaters and the results obtained were in good agreement with those obtained by an automated segmented flow analyser reference method.

Measurement procedures affect the interpretation of metatarsophalangeal joint function during accelerated sprinting.

The metatarsophalangeal joint (MPJ) is a significant absorber of energy in sprinting. This study examined the influence of MPJ axis choice and filter cut-off frequency on kinetic variables describing MPJ function during accelerated sprinting. Eight trained sprinters performed maximal sprints along a runway. Three-dimensional high-speed (1000 Hz) kinematic and kinetic data were collected at the 20 m point. Three axis definitions for the five MPJs were compared. MPJ moments, powers and energies were calculated using different filter cut-off frequencies. The more anatomically appropriate dual axis resulted in less energy absorbed at the MPJ compared to the oblique axis which also absorbed less energy compared to the perpendicular axis. Furthermore, a low cut-off frequency (8 Hz) substantially underestimated MPJ kinematics, kinetics and the energy absorbed at the joint and lowered the estimate of energy production during push-off. It is concluded that a better understanding of MPJ function during sprinting would be obtained by using an oblique or anatomically appropriate representation of the joint together with appropriate kinematic data sampling and filtering so that high frequency movement characteristics are retained.

Quantifying the hip-ankle synergy in short-term maximal cycling.

Simulation studies have demonstrated that the hip and ankle joints form a task-specific synergy during the downstroke in maximal cycling to enable the power produced by the hip extensor muscles to be transferred to the crank. The existence of the hip-ankle synergy has not been investigated experimentally. Therefore, we sought to apply a modified vector coding technique to quantify the strength of the hip-ankle moment synergy in the downstroke during short-term maximal cycling at a pedalling rate of 135 rpm. Twelve track sprint cyclists performed 3 × 4 s seated sprints at 135 rpm, interspersed with 2 × 4 s seated sprints at 60 rpm on an isokinetic ergometer. Data from the 60 rpm sprints were not analysed in this study. Joint moments were calculated via inverse dynamics, using pedal forces and limb kinematics. The hip-ankle moment synergy was quantified using a modified vector coding method. Results showed, for 28.8% of the downstroke the hip and ankle moments were in-phase, demonstrating the hip and ankle joints tend to work in synergy in the downstroke, providing some support findings from simulation studies of cycling. At a pedalling rate of 135 rpm the hip-phase was most frequent (42.5%) significantly differing from the in- (P = 0.044), anti- (P < 0.001), and ankle-phases (P = 0.004), demonstrating hip-dominant action. We believe this method shows promise to answer research questions on the relative strength of the hip-ankle synergy between different cycling conditions (e.g., power output and pedalling rates).

Concurrent validity and test-retest reliability of a global positioning system (GPS) and timing gates to assess sprint performance variables.

There has been no previous investigation of the concurrent validity and reliability of the current 5 Hz global positioning system (GPS) to assess sprinting speed or the reliability of integrated GPS-accelerometer technology. In the present study, we wished to determine: (1) the concurrent validity and reliability of a GPS and timing gates to measure sprinting speed or distance, and (2) the reliability of proper accelerations recorded via GPS-accelerometer integration. Nineteen elite youth rugby league players performed two over-ground sprints and were simultaneously assessed using GPS and timing gates. The GPS measurements systematically underestimated both distance and timing gate speed. The GPS measurements were reliable for all variables of distance and speed (coefficient of variation [CV] = 1.62% to 2.3%), particularly peak speed (95% limits of agreement [LOA] = 0.00 ± 0.8 km · h(-1); CV = 0.78%). Timing gates were more reliable (CV = 1% to 1.54%) than equivalent GPS measurements. Accelerometer measurements were least reliable (CV = 4.69% to 5.16%), particularly for the frequency of proper accelerations (95% LOA = 1.00 ± 5.43; CV = 14.12%). Timing gates and GPS were found to reliably assess speed and distance, although the validity of the GPS remains questionable. The error found in accelerometer measurements indicates the limits of this device for detecting changes in performance.

Movement and physiological match demands of elite rugby league using portable global positioning systems.

Twelve elite players from an English Super League club consented to participate in the present study using portable global positioning system (GPS) devices to assess position-specific demands. Distances covered at low-intensity running, moderate-intensity running, high-intensity running, very high-intensity running, and total distance were significantly (P < 0.05) lower in forwards compared with outside backs and adjustables. Metres per minute was higher in adjustables and forwards, owing to higher values for relative distance in medium-intensity running and a rise in high-intensity running from previous absolute values. Sprint distance, sprint frequency, and peak speed were higher in outside backs than both adjustables and forwards. A moderate, significant correlation (r = 0.62, P = 0.001) was apparent between session ratings of perceived exertion and summated heart rate. Results support the requirement for position-specific conditioning and provide preliminary evidence for the use of session ratings of perceived exertion as a measure of match load.

The contribution of roadside soil to phosphorus loading in the eutrophic Lagos Lagoon, Nigeria.

Roadside soils were sampled from the Lagos Lagoon catchment during the wet and dry seasons over the period 2005-2009. Lagoon sediment samples were also collected within the same period. All samples were digested with aqua regia to determine total phosphorus and extracted with 0.5 M sodium bicarbonate to determine the bioavailable fraction (Olsen-P). A segmented flow analyser method was used for analysis and good accuracy was demonstrated for two reference soils (SO-2 from CCMET and SRM 2711 from NIST). The Lagos Lagoon is a hypereutrophic water body (1270 ± 1170 µg P L(-1)), with significant areas of anoxia and water hyacinth growth. The total phosphorus concentrations in roadside soils (16 sites; mean ± 2 S.D.) were 285 ± 279 mg kg(-1) in the wet season and 424 ± 629 mg kg(-1) in the dry season, indicating that rainwater leaching is a major source of phosphorus in the lagoon. The bioavailable fractions were 5.17 ± 3.47 mg kg(-1) (2.1 ± 1.5% of the total) in the wet season and 13.0 ± 8.7 mg kg(-1) (4.3 ± 4.5% of the total) in the dry season.