RESUMO
For the design and development of organic electronic devices, the main focus is particularly on the synthesis of new organic semiconductors and dielectric materials. Molecular engineering is another effective strategy, in this direction which has been explored successfully in this study through synthesis of a π-conjugated oligomer CbzTPAU2, with Mw = 2169. This bow shaped oligomer has its core unit made of 2,7-disubstituted carbazole which further has been connected to its end-terminal unit TPAU2 by 1,4-bis(decyloxy)-2,5-diethynylbenzene. The presence of a uracil moiety on end terminals of CbzTPAU2 has triggered the self-assembly of CbzTPAU2 molecules through knitting up of each of these single units through four Uracil-Uracil intermolecular hydrogen bonds (UU) per CbzTPAU2 unit. An Atomic Force Microscope (AFM) study was employed to explore the directionality of hydrogen bonding. Further, the effect of solvent polarity on the stability of UU bonding in CbzTPAU2 oligomers has also been reported here in this study. The potential of these self-assembled CbzTPAU2 oligomers when explored as charge transporting layers in OTFTs has shown p-type behaviour. The OTFT device bottom-gate, top-contact when fabricated on the heavily doped n-type Si wafer with SiO2 as a gate dielectric (200 nm) has shown a good on/off ratio 3.43 × 10(3) and with an average hole mobility of 0.167 cm(2) V(-1) s(-1).
RESUMO
In this research, we used a polycrystalline silicon nanowire field-effect transistor (poly-Si NWFET) as a biosensor that employs the sidewall spacer technique instead of an expensive electron beam lithography method. When compared with commercial semiconductor processes, the sidewall spacer technique has the advantages of simplicity and low cost. In this study, we employed a novel poly-Si NWFET device for real-time, label-free, and ultrahigh-sensitivity detection of prostate-specific antigen (PSA) in human serum. Since serum proteome is very complex containing high levels of salts and other interfering compounds, we hereby developed a standard operating procedure for real-sample pretreatment to keep a proper pH value and ionic strength of the desalted serum and also utilized Tween 20 to serve as the passivation agent by surface modification on the NWFET to reduce nonspecific binding for medical diagnostic applications. We first modified 3-aminopropyltriethoxysilane on the surface of a poly-Si nanowire device followed by glutaraldehyde functionalization, and the PSA antibodies were immobilized on the aldehyde terminal. While PSA was prepared in the buffers to maintain an appropriate pH value and ionic strength, the results indicated that the sensor could detect trace PSA at less than 5 fg/mL in a microfluidic channel. The novel poly-Si NWFET is developed as a diagnostic platform for monitoring prostate cancer and predicting the risk of early biochemical relapse.
Assuntos
Técnicas Biossensoriais , Nanofios , Antígeno Prostático Específico/sangue , Silício/química , Cristalização , Humanos , Microscopia Eletrônica de VarreduraRESUMO
Nanoparticle-based material is a revolutionary scientific and engineering venture that will invariably impact the existing analytical separation and preconcentration for a variety of analytes. Nanoparticles can be regarded as a hybrid between small molecule and bulk material. A material on the nanoscale produces considerable changes on various properties, making them size- and shape-dependent. Gold nanoparticles (Au NPs), one of the wide variety of core materials available, coupled with tunable surface properties in the form of inorganic or inorganic-organic hybrid have been reported as an excellent platform for a broad range of analytical methods. This review aims to introduce the basic principles, examples, and descriptions of methods for the characterization of Au NPs by using chromatography, electrophoresis, and self-assembly strategies for separation science. Some of the latest important applications of using Au NPs as stationary phases toward open-tubular capillary electrochromatography, gas chromatography, and liquid chromatography as well as roles of run buffer additive to enhance separation and preconcentration in the field of chromatographic, electrophoretic and in chip-based systems are reviewed. Additionally, we review Au NPs-assisted state-of-the-art techniques involving the use of micellar electrokinetic chromatography, an online diode array detector, solid-phase extraction, and mass spectrometry for the preconcentration of some chemical compounds and biomolecules.
Assuntos
Técnicas de Química Analítica/instrumentação , Ouro/química , Nanopartículas Metálicas/química , Nanotecnologia/instrumentação , Animais , Técnicas de Química Analítica/métodos , Humanos , Nanotecnologia/métodosRESUMO
Fully flexible metal-insulator-metal (MIM) capacitors fabricated on 25 microm thin polyimide (PI) substrates via the surface sol-gel process using 10-nm-thick zirconium-silicate (ZrSixOy) and hafnium-silicate (HfSimOn) films as gate dielectrics. The surface morphology of the ZrSixOy and HfSimOn films were investigated using atomic force microscopy and scanning electron microscopy, which confirmed that continuous and crack-free surface growth had occurred on the PI. Both the films treated with oxygen (O2) plasma and annealing (ca. 250 degrees C) consisted of amorphous phase; confirmed by X-ray diffraction. We employed X-ray photoelectron spectroscopy (XPS) at high resolution to examine the chemical composition of the films subjected to various treatment conditions. The shift of the XPS peaks towards higher binding energy revealed the O2 plasma-pretreatment followed by annealing was the most effective process to the surface oxidation at relatively low-temperature, for further passivate the grease traps and making dielectric films thermally stable. The ZrSixOy and HfSimOn films in sandwich-like MIM configuration on the PI substrates exhibited the low leakage current densities of 7.1 x 10(-9) and 8.4 x 10(-9) A/cm2 at applied electric field of 10 MV/cm and maximum capacitance densities of 7.5 and 5.3 fF/microm2 at 1 MHz, respectively. In addition, the ZrSixOy and HfSimOn films in MIM capacitors showed the estimated dielectric constants of 8.2 and 6.0, respectively. Prior to use of flexible MIM capacitors in advanced flexible electronic devices; the reliability test was studied by applying day-dependent leakage current density measurements up to 30 days. These films of silicate-surfactant mesostructured materials have special interest to be used as gate dielectrics in future for flexible metal-oxide-semiconductor devices.
RESUMO
A miniaturized metal semiconductor metal photodetector was developed as the core detector for chemiluminescence biosensor. The biosensor utilized the semiconductor manufacturing to fabricate the 83 interdigitated patterns of 250-nm metal line and 278-nm space in 100 microm x 100 microm active region. The established real-time detector was operated at 0.4 V to ensure the maximal signal to background ratio of 3600 under illumination intensity of 1.46 mW/cm(2). A chemiluminescence in the miniaturized chamber was successfully proposed to determine the model protein concentration in real-time analysis. Before the emission of light from the catalytic reaction of substrate, the model protein of streptavidin bound to horseradish peroxidase was successfully immobilized onto the sensor surface through the high-affinity conjugate with biotin. The detection limit of 4.76 nM for streptavidin analysis was obtained under the calibration curve of linear range over 5-100 nM with correlation coefficient of 0.9999.
Assuntos
Técnicas Biossensoriais/instrumentação , Técnicas Biossensoriais/métodos , Medições Luminescentes/instrumentação , Medições Luminescentes/métodos , Miniaturização/instrumentação , Proteínas/análise , Proteínas de Bactérias/análise , Proteínas de Bactérias/metabolismo , Calibragem , Desenho de Equipamento , Peroxidase do Rábano Silvestre/análise , Peroxidase do Rábano Silvestre/metabolismo , Proteínas Imobilizadas/análise , Proteínas Imobilizadas/metabolismo , Modelos Lineares , Modelos Químicos , Proteínas/metabolismo , Semicondutores/instrumentação , Sensibilidade e EspecificidadeRESUMO
Kinetic and thermodynamic studies reveal that the property of significantly enhanced catalytic activity with colloidal stability is attributed to an efficacious means of tuning enzyme-substrate association by varying with the rate constants in the presence of functionalized gold nanoparticles.
Assuntos
Enzimas Imobilizadas/metabolismo , Ouro/química , Lipase/metabolismo , Nanopartículas Metálicas/química , Biocatálise , Coloides/química , Cinética , Tamanho da Partícula , Cloreto de Sódio/química , Propriedades de Superfície , TermodinâmicaRESUMO
Peptide-based supramolecular hydrogels have been comprehensively investigated in biomaterial applications because of their unique bioactivity, biofunctionality, and biocompatible features. However, the presence of organic building blocks in peptide-based hydrogels often results in low mechanical stability. To expand their practical use and range of applications, it is necessary to develop the tool kit available to prepare bioinspired, peptide-based supramolecular hydrogels with improved mechanical stability. In this paper, we present an innovative electrostatic and cross-linking approach in which naphthyl-Phe-Phe-Cys (NapFFC) oligopeptides are combined with gold nanoparticles (AuNPs) and calcium ions (Ca(2+)) to produce peptide-based supramolecular hydrogels. We further investigate the interactions among NapFFC, AuNPs and Ca(2+) by microscopy. The morphology of the nanofibrous network constructions and the binding forces exhibited from the hydrogel demonstrated that the combination of two mechanisms successfully enhanced the mechanical stability through the formation of a densely entangled fibrous network of peptide multimers that is attributed to the AuNP linkage and Ca(2+)-induced agglomeration. UV-vis spectrophotometry and fluorescence analysis were also used to demonstrate the enhanced stability of the hydrogel under various conditions such as thermal, solvent erosion, pH value and sonication. All results indicate that the presence of AuNPs and Ca(2+) can strengthen the prepared hydrogel by more than doubling the diameter of NapFFC nanofibers, enabling the formation of stronger frameworks and slowing the release of components. Further experiments confirmed that HeLa cells can grow on the bioinspired NapFFC-AuNP hydrogel and exhibit high cell viability and that these cells were killed on contact with a hydrogel containing a drug. Our peptide-based supramolecular hydrogels prepared from the observed electrostatic and cross-linking mechanisn exhibited a significantly improved mechanical stability, making them well suited to use as a drug carrier in hydrogel dressings and as extracellular materials (ECMs) for tissue engineering.
Assuntos
Materiais Biocompatíveis/química , Géis/química , Hidrogel de Polietilenoglicol-Dimetacrilato/síntese química , Cálcio/análise , Morte Celular , Doxorrubicina/farmacologia , Sistemas de Liberação de Medicamentos , Ouro/química , Células HeLa , Humanos , Concentração de Íons de Hidrogênio , Íons , Nanopartículas Metálicas/química , Nanofibras/ultraestrutura , Oligopeptídeos/química , Imagem Óptica , Solventes , Sonicação , Espectrofotometria Ultravioleta , TemperaturaRESUMO
An organic-organic blend thin film has been synthesized through the solution deposition of a triblock copolymer (Pluronic P123, EO20-PO70-EO20) and polystyrene (PS), which is called P123-PS for the blend film whose precursor solution was obtained with organic additives. In addition to having excellent insulating properties, these materials have satisfied other stringent requirements for an optimal flexible device: low-temperature fabrication, nontoxic, surface free of pinhole defect, compatibility with organic semiconductors, and mechanical flexibility. Atomic force microscope measurements revealed that the optimized P123-PS blend film was uniform, crack-free, and highly resistant to moisture absorption on polyimide (PI) substrate. The film was well-adhered to the flexible Au/Cr/PI substrate for device application as a stable insulator, which was likely due to the strong molecular assembly that includes both hydrophilic and hydrophobic effects from the high molecular weights. The contact angle measurements for the P123-PS surface indicated that the system had a good hydrophobic surface with a total surface free energy of approximately 19.6 mJ m(-2). The dielectric properties of P123-PS were characterized in a cross-linked metal-insulator-metal structured device on the PI substrate by leakage current, capacitance, and dielectric constant measurements. The P123-PS film showed an average low leakage current density value of approximately 10(-10) A cm(-2) at 5-10 MV cm(-1) and large capacitance of 88.2 nF cm(-2) at 1 MHz, and the calculated dielectric constant was 2.7. In addition, we demonstrated an organic thin-film transistor (OTFT) device on a flexible PI substrate using the P123-PS as the gate dielectric layer and pentacene as the channel layer. The OTFT showed good saturation mobility (0.16 cm(2) V(-1) s(-1)) and an on-to-off current ratio of 5 × 10(5). The OTFT should operate under bending conditions; therefore flexibility tests for two types of bending modes (tensile and compressive) were also performed successfully.
RESUMO
A series of experiments were performed to systematically analyze the effect of nanoparticle (NP) size on the catalytic behavior of enzyme-NP conjugates, and a shielding model based on diffusion-collision theory was developed to explain the correlation between the size effects and the kinetic responses.
Assuntos
Biocatálise , Lipase/química , Lipase/metabolismo , Modelos Químicos , Nanopartículas/química , Tamanho da Partícula , Candida/enzimologia , CinéticaRESUMO
A new organic-organic nanoscale composite thin-film (NCTF) dielectric has been synthesized by solution deposition of 1-bromoadamantane and triblock copolymer (Pluronic P123, BASF, EO20-PO70-EO20), in which the precursor solution has been achieved with organic additives. We have used a sol-gel process to make a metal-insulator-metal capacitor (MIM) comprising a nanoscale (10â nm-thick) thin-film on a flexible polyimide (PI) substrate at room temperature. Scanning electron microscope and atomic force microscope revealed that the deposited NCTFs were crack-free, uniform, highly resistant to moisture absorption, and well adhered on the Au-Cr/PI. The electrical properties of 1-bromoadamantane-P123 NCTF were characterized by dielectric constant, capacitance, and leakage current measurements. The 1-bromoadamantane-P123 NCTF on the PI substrate showed a low leakage current density of 5.5 x 10(-11)â A cm(-2) and good capacitance of 2.4â fF at 1â MHz. In addition, the calculated dielectric constant of 1-bromoadamantane-P123 NCTF was 1.9, making them suitable candidates for use in future flexible electronic devices as a stable intermetal dielectric. The electrical insulating properties of 1-bromoadamantane-P123 NCTF have been improved due to the optimized dipole moments of the vanâ der Waals interactions.