[Research Photon Energy Spectrum of Medical Linear Accelerator by Monte Carlo Method].

Objective: The distribution of the photon energy spectrum in isocenter plane of the medical linear accelerator and the influence of secondary collimator on the photon energy spectrum are studied. Methods Use the BEAMnrc program to simulate the transmission of the 6 MeV electrons and photons in 5 cm×5 cm,10 cm×10 cm,15 cm×15 cm and 20 cm×20 cm fields in treatment head of the medical linear accelerator, where a phase space file was set up at the isocenter plane to record the particle information passing through this plane. The BEAMdp program is used to analyze the phase space file, in order to obtain the distribution of the photon energy spectrum in isocenter plane and the influence of secondary collimator on the photon energy spectrum. Results: By analyzing the photon energy spectrum of a medical linear accelerator with a nominal energy of 6 MV, it is found that the secondary collimator has little effect on the photon energy spectrum; different fields have different photon energy spectrum distributions; the photon energy spectrum in different central regions of the same field have the same normalized distribution. Conclusion: In the dose calculation of radiation therapy, the influence of photon energy spectrum should be carefully considered.

The ecdysis triggering hormone system is essential for reproductive success in Mythimna separata (Walker).

Ecdysis triggering hormone (ETH) was originally discovered as a key hormone that regulates insect moulting via binding to its receptor, ETH receptor (ETHR). However, the precise role of ETH in moth reproduction remains to be explored in detail. ETH function was verified in vivo using Mythimna separata (Walker), an important cereal crop pest. RT-qPCR analysis revealed that transcriptional expression profiles of MsepETH showed evident sexual dimorphism in the adult stage. MsepETH expression increased in the females on day 3 and persisted thereafter till day 7, consistent with female ovarian maturation, and was merely detectable in males. Meanwhile, MsepETH expression levels were significantly higher in the trachea than in other tissues. MsepETHR-A and MsepETHR-B were expressed in both sexes and were significantly higher in the antennae than in other tissues. MsepETH and MsepETHR knockdown in females by RNA interference significantly reduced the expression of MsepETH, MsepETHR-A, MsepETHR-B, MsepJHAMT, and MsepVG, which delayed egg-laying and significantly reduced egg production. RNAi 20-hydroxyecdysone (20E) receptor (EcR) decreased MsepETH expression whereas injecting 20E restored egg production that had been disrupted by MsepETH interference. Meanwhile, RNAi juvenile hormone (JH) methoprene tolerant protein (Met) also decreased MsepETH expression and smearing JH analog methoprene (Meth) restored egg production. In conclusion, the reproduction roles of ETH, JH, and 20E were investigated in M. separata. These findings will lay the foundation for future research to develop an antagonist that reduces female reproduction and control strategies for pest insects.

Prognostic Significance of Clinicopathological Factors Influencing Overall Survival and Event-Free Survival of Patients with Cervical Cancer: A Systematic Review and Meta-Analysis.

BACKGROUND Cervical cancer (CC) is the most frequent type of cancer among women and its poor prognosis is a main concern, while the prognostic factors for CC have still remained controversial. We conducted this systematic review and meta-analysis to identify the prognostic significance of clinicopathological factors, influencing overall survival (OS), and event-free survival (EFS) of CC patients. MATERIAL AND METHODS The electronic databases of PubMed, EmBase, and the Cochrane library were systematically searched for identification of eligible studies published until June 2021. The pooled hazard ratio (HR) with 95% confidence interval (CI) were calculated using the random-effects model. Sensitivity and subgroup analyses and assessment of publication bias were also conducted. RESULTS We selected 140 studies that involved 47 965 patients for the meta-analysis. The results revealed that age, cell type, depth of tumor invasion, the International Federation of Gynecology and Obstetrics stage, hemoglobin level, histological grade, leukocytosis, lymph node involvement, lymph-vascular space invasion, neutrophil-to-lymphocyte ratio, parametrial invasion, platelet-to-lymphocyte ratio, resection margin, squamous cell carcinoma antigen level, thrombocytosis, tumor grade, tumor size, and tumor volume were clinicopathological factors influencing OS and EFS of CC patients (P<0.05). CONCLUSIONS This study comprehensively identified the prognostic significance of clinicopathological factors, influencing OS, and EFS of CC patients. However, further large-scale prospective studies should be conducted to verify our findings and develop more accurate prognostic models for CC.

Three-dimensional printing-based personalized limb salvage and reconstruction treatment of pelvic tumors.

BACKGROUND AND OBJECTIVES: The treatment of pelvic tumors is widely recognized to be challenging. The purpose of this study was to evaluate the efficacy of personalized three-dimensional (3D) printing-based limb salvage and reconstruction treatment for pelvic tumors. METHODS: Twenty-eight pelvic tumor patients were enrolled. 3D printing lesion models and osteotomy templates were prepared for surgery planning, prosthesis design, and osteotomy assistance during surgery. 3D printing-based personalized pelvic prostheses were manufactured and used in all 28 patients. Follow-up of postoperative survival, prosthesis survival, imaging examinations, and Musculoskeletal Tumor Society (MSTS) lower limb functional scores were carried out. RESULTS: The mean follow-up period was 32.2 months, during which 16 patients had disease-free survival, 3 survived with the disease, and 9 died. The prostheses were stable, and the mean offset of the center of rotation was 5.48 mm. The prosthesis-bone interface showed good integration. For the 19 surviving patients, the mean MSTS lower limb functional score was 23.2. Postoperative complications included superficial infection in six patients and hip dislocation in three patients. CONCLUSIONS: Personalized 3D printing-based limb salvage and reconstruction was an effective treatment for pelvic tumors. Our patients achieved good early postoperative efficacy and functional recovery.

Functional analysis of the odorant receptor coreceptor in odor detection in Grapholita molesta (lepidoptera: Tortricidae).

The olfactory system must detect and discriminate various semiochemicals in the environment. In response to such diversity, insects have evolved a family of odorant-gated ion channels composed of a common receptor (coreceptor, Orco) and a ligand-binding tuning odorant receptor (OR) that confers odour specificity. This study aims to examine the expression pattern of Orco gene of Grapholita molesta (GmolOrco) and to elucidate the role of GmolOrco in detecting G. molesta sex pheromone and green leaf volatiles by using gene silencing via RNA interference (RNAi) coupled antennal electrophysiological (EAG). Multiple sequence alignment showed that GmolOrco shared high sequence similarities with the Orco ortholog of lepidopterans. The results of real-time quantitative PCR detection demonstrated that GmolOrco was predominantly expressed in adult antennae and had the highest expression quantity in adult period among the different developmental stages. Compared with the noninjected controls, GmolOrco expression in GmolOrcodouble-stranded RNA (dsRNA)-injected males was reduced to 39.92% and that in females was reduced to 40.43%. EAG assays showed that the responses of GmolOrco-dsRNA injected males to sex pheromones (Z)-8-dodecenyl acetate (Z8-12:OAc) and (Z)-8-dodecenyl alcohol (Z8-12:OH) were significantly reduced, and the GmolOrco-dsRNA-injected female to green leaf volatile (Z)-3-hexenyl acetate also significantly declined. We inferred that Orco-mediated olfaction was different in male and female G. molesta adults and was mainly involved in recognizing the sex pheromones released by female moths.

Demography of Mythimna separata (Lepidoptera: Noctuidae) at outdoor fluctuating temperatures.

The oriental armyworm Mythimna separata (Walker) (Lepidoptera: Noctuidae) is a major migratory pest of cereal crops in East Asia, South Asia and Australia. To comprehensively understand the ecological tolerance of M. separata, we collected life table data of individuals from four consecutive generations reared under outdoor natural fluctuating temperatures from 15 April to 17 October 2018 in Yangling, Shaanxi, China. The results showed that the immature stage in early summer and summer were shorter than in spring and autumn. High mortality in late larval instar and pupal stages was observed in the summer generation. The adult pre-oviposition period in autumn was longer than the other seasons. The population in the earlier two seasons had heavier pupae and higher fecundity than the population in the latter two seasons. The intrinsic rate of increase and the finite rate of increase was the highest in early summer (r = 0.1292 day-1, λ = 1.1391 day-1), followed by spring (r = 0.1102 day-1, λ = 1.1165 day-1), and was the lowest in summer (r = 0.0281 day-1, λ = 1.0293 day-1). The results of this study would be useful to predict the population dynamics of M. separata and deepen our standing of the adaptiveness of this migratory pest in natural fluctuating ambient environments.

A clinical study on bone defect reconstruction and functional recovery in benign bone tumors of the lower extremity, treated by bone marrow mesenchymal stem cell rapid screening-enrichment-composite system.

BACKGROUND: With the development of medical technology, credible options for defect reconstructions after the resection of benign bone tumors of the lower extremities have become a high priority. As the current reconstructive methods commonly used in clinical practice have some flaws, new methods of reconstruction need to be explored. We aimed to prepare a new kind of bioactive scaffold for the repair of bone defects through a stem cell rapid screening-enrichment-composite technology system developed by our team. Furthermore, we aimed to investigate the curative effects of these bioactive scaffolds. METHODS: Firstly, cell count, trypan blue exclusion rate, and ALP staining were used to evaluate changes in enrichment efficiency, cell activity, and osteogenic ability before and after enrichment. Then, the scaffolds were placed under the skin of nude mice to verify their osteogenic effects in vivo. Finally, the scaffolds were used for the reconstruction of bone defects after operations for benign bone tumors in a patient's lower limb. The healing status of the defect site at 1 and 3 months was assessed by X-ray, and the Musculoskeletal Tumor Society (MSTS) score was applied to reflect the recovery of patient limb function. RESULTS: The system effectively enriched stem cells without affecting the activity and osteogenic abilities of the bone marrow mesenchymal stem cells (BMSCs). Meanwhile, the bioactive scaffolds obtained better osteogenic effects. In patients, the active scaffolds showed better bone integration and healing status, and the patients also obtained higher MSTS scores at 1 and 3 months after surgery. CONCLUSION: As a new technique, the rapid screening-enrichment-composite technology of stem cells demonstrates a better therapeutic effect in the reconstruction of bone defects after surgery for benign bone tumors of the lower extremities, which will further improve patient prognosis.

Partially Melted Ti6Al4V Particles Increase Bacterial Adhesion and Inhibit Osteogenic Activity on 3D-printed Implants: An In Vitro Study.

BACKGROUND: A porous Ti6Al4V implant that is manufactured using selective laser melting (SLM) has broad potential applications in the field of orthopaedic implants. The pore structure of the SLM porous Ti6Al4V implant allows for cell migration and osteogenic differentiation, which is favorable for bone ingrowth and osseointegration. However, it is unclear whether the pore structure and partially melted Ti6Al4V particles on a SLM porous Ti6Al4V implant will increase bacterial adhesion and, perhaps, the risk of implant-related infection. QUESTIONS/PURPOSES: (1) Is there more bacterial adhesion and colonization on SLM porous Ti6Al4V implants than on polished orthopaedic implants? (2) Do partially melted Ti6Al4V particles on SLM porous Ti6Al4V implants reduce human bone mesenchymal stem cells (hBMSCs) adhesion, viability, and activity? METHODS: To determine bacterial adhesion and biofilm formation, we incubated five different Ti6Al4V discs (polished, grit-blasted, plasma-sprayed, particle SLM porous, and nonparticle SLM porous discs) with methicillin-resistant Staphylococcus aureus (MRSA) and Escherichia coli. Bacterial coverage on the surface of the five different Ti6Al4V discs were evaluated based on scanning electron microscopy (SEM) images quantitatively. In addition, a spread-plate method was used to quantitatively evaluate the bacterial adhesion on those implants. The biofilm formation was stained with crystal violet and semi-quantitatively determined with a microplate reader. The morphology and adhesion of hBMSCs on the five Ti6Al4V discs were observed with SEM. The cell viability was quantitatively evaluated with a Cell Counting Kit-8 assay. In addition, the osteogenic activity was determined in vitro with a quantitatively alkaline phosphatase activity assay and alizarin-red staining. For semiquantitative analysis, the alizarin-red stained mineralized nodules were dissolved and determined with a microplate reader. RESULTS: The polished discs had the lowest MRSA adhesion (8.3% ± 2.6%) compared with grit-blasted (19.1% ± 3.9%; p = 0.006), plasma-sprayed (38.5% ± 5.3%; p < 0.001), particle (23.1% ± 2.8%; p < 0.001), and nonparticle discs (15.7% ± 2.5%; p = 0.003). Additionally, when comparing the two SLM discs, we found that particle discs had higher bacterial coverage than nonparticle discs (23.1% ± 2.8% versus 15.7% ± 2.5%; p = 0.020). An E. coli analysis showed similar results, with the higher adhesion to particle SLM discs than to nonparticle discs (20.7% ± 4.2% versus 14.4% ± 3.6%; p = 0.011). In addition, on particle SLM porous discs, bacterial colonies were localized around the partially melted Ti6Al4V particles, based on SEM images. After a 7-day incubation period, the cell viability in the particle group (optical density value 0.72 ± 0.05) was lower than that in the nonparticle groups (optical density value: 0.87 ± 0.08; p = 0.003). Alkaline phosphatase activity, as a marker of osteogenic differentiation, was lower in the particle group than in the nonparticle group (1.32 ± 0.12 U/mL versus 1.58 ± 0.09 U/mL; p = 0.012). CONCLUSION: Higher bacterial adhesion was observed on SLM porous discs than on polished discs. The partially melted Ti6Al4V particles on SLM porous discs not only enhanced bacterial adhesion but also inhibited the osteogenic activity of hBMSCs. Postprocessing treatment is necessary to remove partially melted Ti6Al4V particles on an SLM implant before further use. Additional studies are needed to determine whether an SLM porous Ti6Al4V implant increases the risk of implant-related infection in vivo. CLINICAL RELEVANCE: As implants with porous Ti6Al4V made using SLM are being designed, our preliminary findings suggest that postprocessing treatment is needed to remove partially melted Ti6Al4V particles before further use. In addition, the depth of the porous structure of the SLM implant should not exceed the maximum depth of bone ingrowth because the host immune defense cannot prevent bacterial adhesion without integration.

The terpene synthase gene family in Gossypium hirsutum harbors a linalool synthase GhTPS12 implicated in direct defence responses against herbivores.

Herbivore-induced terpenes have been reported to function as ecological signals in plant-insect interactions. Here, we showed that insect-induced cotton volatile blends contained 16 terpenoid compounds with a relatively high level of linalool. The high diversity of terpene production is derived from a large terpene synthase (TPS) gene family. The TPS gene family of Gossypium hirsutum and Gossypium raimondii consist of 46 and 41 members, respectively. Twelve TPS genes (GhTPS4-15) could be isolated, and protein expression in Escherichia coli revealed catalytic activity for eight GhTPS. The upregulation of the majority of these eight genes additionally supports the function of these genes in herbivore-induced volatile biosynthesis. Furthermore, transgenic Nicotiana tabacum plants overexpressing GhTPS12 were generated, which produced relatively large amounts of (3S)-linalool. In choice tests, female adults of Helicoverpa armigera laid fewer eggs on transgenic plants compared with non-transformed controls. Meanwhile, Myzus persicae preferred feeding on wild-type leaves over leaves of transgenic plants. Our findings demonstrate that transcript accumulation of multiple TPS genes is mainly responsible for the production and diversity of herbivore-induced volatile terpenes in cotton. Also, these genes might play roles in plant defence, in particular, direct defence responses against herbivores.

Degradation of sex pheromone and plant volatile components by an antennal glutathione S-transferase in the oriental fruit moth,Grapholita molesta Busck (Lepidoptera: Tortricidae).

Insect antennae have a primary function of perceiving and discerning odorant molecules including sex pheromones and host plant volatiles. The assumption that genes highly expressed in the antennae may have an olfactory-related role associated with signal transduction. Here, one delta subfamily glutathione S-transferase (GST) gene (GmolGSTD1) was obtained from an antennal transcriptome of Grapholita molesta. Quantitative real-time polymerase chain reaction results revealed that GmolGSTD1 was mainly expressed in antennae and the expression levels were significantly higher in female antennae than in male antennae. The recombinant GmolGSTD1 (rGmolGSTD1) showed glutathione-conjugating activity toward 1-chloro-2,4-dinitrobenzene (CDNB) as substrates. The pH range for optimal rGmolGSTD1 enzyme activity was 6.0-6.5, and rGmolGSTD1 enzyme activity had maximal peaks at 35-40°C. Spectrophotometric analysis indicated that insecticides had weak inhibitory effects on the activity of rGmolGSTD1 with the inhibitory rates of 28.82% for chlorpyrifos, 22.27% for lambda-cyhalothrin, 18.07% for bifenthrin, 20.42% for acetamiprid, 17.57% for thiamethoxam, 25.67% for metaflumizone, 27.43% for abamectin, and 7.24% for chlorbenzuron. rGmolGSTD1 exhibited high degradation activity to the sex pheromone component (Z)-8-dodecenyl alcohol and the host plant volatile butyl hexanoate with the degradation efficiency of 75.01% and 48.54%, respectively. We speculate that GmolGSTD1 works in inactivating odorant molecules and maintaining sensitivity to olfactory communication of G. molesta.

Molecular and functional characterization of three odorant binding proteins from the oriental fruit moth Grapholita molesta (Busck) (Lepidoptera: Tortricide).

Odorant binding proteins (OBPs) act in recognizing odor molecules and their most well-studied functions are transporting odors across the sensillum lymph to olfactory receptor neurons within the insect antennal sensillum. The adults of Grapholita molesta highly depend on olfactory cues in locating host plants and selecting oviposition sites, in which OBPs play an important role in perceiving and recognizing host plant volatiles. Exploring the physiological function of OBPs could facilitate our understanding of their importance in insects' chemical communication. In this study, three OBP genes were cloned and named GmolOBP4, GmolOBP5, and GmolOBP10. Quantitative real-time PCR results indicated that GmolOBP4 and GmolOBP10 were predominantly expressed in adult antennae and GmolOBP5 was expressed in multiple tissues, including head, legs, and wings in addition to antennae. The binding affinities of the three recombinant GmolOBPs (rGmolOBPs) with four sex pheromone components and twenty-nine host plant volatiles were measured using 1-N-Phenyl-naphthylamine as a fluorescence probe. The three rGmolOBPs exhibited specific binding properties to potential ligands, GmolOBP4 and GmolOBP10 bound to minor sex pheromone components, such as (Z)-8-dodecenyl alcohol and dodecanol, respectively. rGmolOBP4 showed intermediate binding ability with hexanal, benzyl alcohol, and pear ester, rGmolOBP5 had a weak affinity for benzaldehyde, pear ester and, methyl jasmonate, and rGmolOBP10 showed strong binding capacity toward hexanol, decanol, and α-ocimene. We speculate that the GmolOBP4 and GmolOBP10 have dual functions in perception and recognition of host plant volatiles and sex pheromone components, while GmolOBP5 may serve other function(s).

Dosimetric study of GZP6 60 Co high dose rate brachytherapy source.

The purpose of this study was to obtain dosimetric parameters of GZP6 60 Co brachytherapy source number 3. The Geant4 MC code has been used to obtain the dose rate distribution following the American Association of Physicists in Medicine (AAPM) TG-43U1 dosimetric formalism. In the simulation, the source was centered in a 50 cm radius water phantom. The cylindrical ring voxels were 0.1 mm thick for r ≤ 1 cm, 0.5 mm for 1 cm < r ≤ 5 cm, and 1 mm for r > 5 cm. The kerma-dose approximation was performed for r > 0.75 cm to increase the simulation efficiency. Based on the numerical results, the dosimetric datasets were obtained. These results were compared with the available data of the similar 60 Co high dose rate sources and the detailed dosimetric characterization was discussed.

CLONING, EXPRESSION, AND FUNCTIONAL ANALYSIS OF THREE ODORANT-BINDING PROTEINS OF THE ORIENTAL FRUIT MOTH, Grapholita molesta (BUSCK) (LEPIDOPTERA: TORTRICIDAE).

Odorant-binding proteins (OBPs) act in insect olfactory processes. OBPs are expressed in the olfactory organs and serve in binding and transport of hydrophobic odorants through the sensillum lymph to olfactory receptor neurons within the antennal sensilla. In this study, three OBP genes were cloned from the antennal transcriptome database of Grapholita molesta via reverse-transcription PCR. Recombinant GmolOBPs (rGmolOBPs) were expressed in a prokaryotic expression system and enriched via Ni ion affinity chromatography. The binding properties of the three rGmolOBPs to four sex pheromones and 30 host-plant volatiles were investigated in fluorescence ligand-binding assays. The results demonstrated that rGmolOBP8, rGmolOBP11, and rGmolOBP15 exhibited high binding affinities with the major sex pheromone components (E)-8-dodecenyl acetate, (Z)-8-dodecenyl alcohol, and dodecanol. The volatiles emitted from peach and pear, decanal, butyl hexanoate, and α-ocimene, also showed binding affinities to rGmolOBP8 and rGmolOBP11. Hexanal, heptanal, and α-pinene showed strong binding affinities to rGmolOBP15. Results of the electrophysiological recording experiments and previous behavior bioassays indicated that adult insects had strong electroantennogram and behavioral responses toward butyl hexanoate, hexanal, and heptanal. We infer that the GmolOBP8 and GmolOBP11 have dual functions in perception and recognition of host-plant volatiles and sex pheromones, while GmolOBP15 was mainly involved in plant volatile odorants' perception.

Effect of short neuropeptide F signaling on larval feeding in Mythimna separata.

Mythimna separata is a notorious phytophagous pest which poses serious threats to cereal crops owing to the gluttony of the larvae. Because short neuropeptide F (sNPF) and its receptor sNPFR are involved in a diversity of physiological functions, especially in functions related to feeding in insects, it is a molecular target for pest control. Herein, an sNPF and 2 sNPFRs were identified and cloned from M. separata. Bioinformatics analysis revealed that the sNPF and its receptors had a highly conserved RLRFamide C-terminus and 7 transmembrane domains, respectively. The sNPF and its receptor genes were distributed across larval periods and tissues, but 2 receptors had distinct expression patterns. The starvation-induced assay elucidated that sNPF and sNPFR expression levels were downregulated under food deprivation and recovered with subsequent re-feeding. RNA interference knockdown of sNPF, sNPFR1, and sNPFR2 by injection of double-stranded RNA into larvae not only suppressed food consumption and increased body size and weight, but also led to decrease of glycogen and total lipid contents, and increase of trehalose compared with double-stranded green fluorescent protein injection. Furthermore, molecular docking was performed on the interaction mode between sNPFR protein and its ligand sNPF based on the 3-dimensional models constructed by AlphaFold; the results indicated that both receptors were presumably activated by the mature peptide sNPF-2. These results revealed that sNPF signaling played a considerably vital role in the feeding regulation of M. separata and represents a potential control target for this pest.

Evaluation of flattening-filter-free and flattening filter dosimetric and radiobiological criteria for lung SBRT: A volume-based analysis.

Introduction: The use of volumetric modulated arc therapy (VMAT) with flattening-filter-free (FFF) beams is becoming more prevalent in lung cancer stereotactic body radiotherapy (SBRT). The aim in this study was to assess the impact of dosimetric and radiobiological differences between FFF and flattening filter (FF) beams for lung SBRT based on the target volume. Methods: A total of 198 lung stereotactic body radiation therapy treatment plans with FFF beams and FF beams were retrospectively selected for this study. For all plans, the prescribed dose was 50 Gy/5 fractions, and the dose volume histogram (DVH) for the target and organs at risk (OAR) and the normal tissue complication probability (NTCP) of the lung were recorded and compared. Moreover, monitor units (MUs), the beam on-time and the treatment time were evaluated. Results: The study was performed following the Radiation Therapy Oncology Group (RTOG) 0813 and 0915 protocols. No significant differences in D90, coverage rate (CR) or conformity index (CI) of the target were observed between FFF beams and FF beams (p>0.05). The D2, R50% and gradient index (GI) for the target improved with FFF beams compared with FF beams (p<0.05). FFF beams also significantly reduced the dose for the lung, heart, spinal cord, esophagus and NTCP of the lung (p<0.05), compared with FF beams. However, there was no significant difference in sparing of the trachea (p>0.05). The mean MUs, beam on-time and treatment time were 1871 ± 278 MUs, 3.2 ± 0.2 min and 3.9 ± 0.3 min for FFF beams, and 1890 ± 260 MUs, 4.2 ± 0.3 min and 4.8 ± 0.4 min for FF beams, respectively. Discussion: The FFF beam technique for lung SBRT with VMAT results in a better dose fall-off, better dose-sparing of OAR, lower NTCP of the lung and a shorter beam on-time compared with the FF beam technique. Additionally, the improvement in target and OAR-sparing for FFF beams was increased with increasing target volume.

Identification of the neuropeptide gene family and feeding regulation by neuropeptide Y in Mythimna separata (Lepidoptera: Noctuidae).

Mythimna separata is a crucial agricultural pest with polyphagous characteristic. Neuropeptide signaling, especially neuropeptide Y (NPY) involved in feeding regulation, is considered as a potential pest control target. In this study, we identified 50 neuropeptides including NPY of M. separata using transcriptome sequencing. Bioinformatics analysis showed that NPY had a conserved carboxyterminal motif of RGRYamide and shared very high homology across lepidopteran insects. Spatio-temporal expression profile articulated that NPY was mainly expressed in the larval stage, and with the highest expression in larval midgut and adult alimentary canal. RNAi knockdown by the injection of dsNPY into larvae significantly inhibited food uptake and body weight, delayed developmental duration, and also caused increase of trehalose and decrease of glycogen and total lipid compared to dsGFP. This study identified nearly the entire neuropeptide gene family of M. separata and further indicated that NPY signaling pathway might played a vital role in the feeding regulation and related to energy metabolism. Our results not only laid a preliminary foundation for functional studies on neuropeptide of M. separata, but also provided a potential molecular target for future pesticide development.

Monte Carlo dosimetry of the 60Co sources of a new GZP3 HDR afterloading system.

BACKGROUND: The purpose of this work was to obtain the dosimetric parameters of the new GZP3 60Co high-dose-rate afterloading system launched by the Nuclear Power Institute of China, which is comprised of two different 60Co sources. METHODS: The Monte Carlo software Geant4 and EGSnrc were employed to derive accurate calculations of the dosimetric parameters of the new GZP3 60Co brachytherapy source in the range of 0-10 cm, following the formalism proposed by American Association of Physicists in Medicine reports TG43 and TG43U1. Results of the two Monte Carlo codes were compared to verify the accuracy of the data. The source was located in the center of a 30-cm-radius theoretical sphere water phantom. RESULTS: For channels 1 and 2 of the new GZP3 60Co afterloading system, the results of the dose-rate constant (Λ) were 1.115 cGy h-1 U-1 and 1.112 cGy h-1 U-1, and for channel 3 they were 1.116 cGy h-1 U-1 and 1.113 cGy h-1 U-1 according to the Geant4 and EGSnrc, respectively. The radial dose function in the range of 0.25-10.0 cm in a longitudinal direction was calculated, and the fitting formulas for the function were obtained. The polynomial function for the radial dose function and the anisotropy function (1D and 2D) with a [Formula: see text] of 0°-175° and an r of 0.5-10.0 cm were obtained. The curves of the radial function and the anisotropy function fitted well compared with the two Monte Carlo software. CONCLUSION: These dosimetric data sets can be used as input data for TPS calculations and quality control for the new GZP3 60Co afterloading system.

The first 3D-bioprinted personalized active bone to repair bone defects: A case report.

The repair and reconstruction of bone defects are still major problems to be solved in the field of orthopedics. Meanwhile, 3D-bioprinted active bone implants may provide a new and effective solution. In this case, we used bioink prepared from the patient's autologous platelet-rich plasma (PRP) combined with polycaprolactone/ß-tricalcium phosphate (PCL/ß-TCP) composite scaffold material to print personalized PCL/ß-TCP/PRP active scaffolds layer by layer through 3D bioprinting technology. The scaffold was then applied in the patient to repair and reconstruct bone defect after tibial tumor resection. Compared with traditional bone implant materials, 3D-bioprinted personalized active bone will have significant clinical application prospects due to its advantages of biological activity, osteoinductivity, and personalized design.

Feasibility of delta radiomics-based pCR prediction for rectal cancer patients treated with magnetic resonance-guided adaptive radiotherapy.

Magnetic resonance-guided adaptive radiotherapy (MRgART) represents the latest frontier in precision radiotherapy. It is distinguished from other modalities by the possibility of acquiring high-contrast soft tissue images, combined with the ability to recalculate and re-optimize the plan on the daily anatomy. The extensive database of available images offers ample scope for using disciplines such as radiomics to try to correlate features and outcomes. This study aimed to correlate the change of radiomics feature along the treatment to pathological complete response (pCR) for locally advanced rectal cancer (LARC) patients. Twenty-eight LARC patients undergoing neoadjuvant chemoradiotherapy (nCRT) with a short course (25 Gy, 5 Gy × 5f) MRgART at 1.5 Tesla MR-Linac were enrolled. The T2-weighted images acquired at each fraction, corresponding target delineation, pCR result of the surgical specimen, and clinical variables were collected. Seven families of features [First Order, Shape, Gray-level Co-occurrence Matrix (GLCM), Gray-level Dependence Matrix (GLDM), Gray-level Run Length Matrix (GLRLM), Gray-level Size Zone Matrix (GLSZM), and Neighborhood Gray Tone Difference Matrix (NGTDM)] were extracted, and delta features were calculated from the ratio of features of each successive fraction to those of the first fraction. Mann-Whitney U test and LASSO were utilized to reduce the dimension of features and select those features that are most significant to pCR. At last, the radiomics signatures were established by linear regression with the final set of features and their coefficients. A total of 581 radiomics features were extracted, and 2,324 delta features were calculated for each patient. Nineteen features and delta features, and one clinical variable (cN) were significant (p< 0.05) to pCR; seven predictive features were further selected and included in the linear regression to construct the radiomics signature significantly discriminating pCR and non-pCR groups (p< 0.05). Delta features based on MRI images acquired during a short course MRgART could potentially be used to predict treatment response in LARC patients undergoing nCRT.

3D-printed biodegradable magnesium alloy scaffolds with zoledronic acid-loaded ceramic composite coating promote osteoporotic bone defect repair.

Osteoporotic fracture is one of the most serious complications of osteoporosis. Most fracture sites have bone defects, and restoring the balance between local osteogenesis and bone destruction is difficult during the repair of osteoporotic bone defects. In this study, we successfully fabricated three-dimensional (3D)-printed biodegradable magnesium alloy (Mg-Nd-Zn-Zr) scaffolds and prepared a zoledronic acid-loaded ceramic composite coating on the surface of the scaffolds. The osteogenic effect of Mg and the osteoclast inhibition effect of zoledronic acid were combined to promote osteoporotic bone defect repair. In vitro degradation and drug release experiments showed that the coating significantly reduced the degradation rate of 3D-printed Mg alloy scaffolds and achieved a slow release of loaded drugs. The degradation products of drug-loaded coating scaffolds can promote osteogenic differentiation of bone marrow mesenchymal stem cells as well as inhibit the formation of osteoclasts and the bone resorption by regulating the expression of related genes. Compared with the uncoated scaffolds, the drug-coated scaffolds degraded at a slower rate, and more new bone grew into these scaffolds. The healing rate and quality of the osteoporotic bone defects significantly improved in the drug-coated scaffold group. This study provides a new method for theoretical research and clinical treatment using functional materials for repairing osteoporotic bone defects.