RESUMO
The high natural abundance of aluminium makes the respective fluorophores attractive for various optical applications, but photoluminescence quantum yields above 0.7 have yet not been reported for solutions of aluminium complexes. In this contribution, a dinuclear aluminium(III) complex featuring enhanced photoluminescence properties is described. Its facile one-pot synthesis originates from a readily available precursor and trimethyl aluminium. In solution, the complex exhibits an unprecedented photoluminescence quantum yield near unity (Φabsolute 1.0±0.1) and an excited-state lifetime of 2.3â ns. In the solid state, J-aggregation and aggregation-caused quenching are noted, but still quantum yields of 0.6 are observed. Embedding the complex in electrospun non-woven fabrics yields a highly fluorescent fleece possessing a quantum yield of 0.9±0.04.
RESUMO
Polyurethanes have the potential to impart cell-relevant properties like excellent biocompatibility, high and interconnecting porosity and controlled degradability into biomaterials in a relatively simple way. In this context, a biodegradable composite material made of an isocyanate-terminated co-oligoester prepolymer and precipitated calcium carbonated spherulites (up to 60% w/w) was synthesized and investigated with regard to an application as bone substitute in dental and orthodontic application. After foaming the composite material, a predominantly interconnecting porous structure is obtained, which can be easily machined. The compressive strength of the foamed composites increases with raising calcium carbonate content and decreasing calcium carbonate particle size. When stored in an aqueous medium, there is a decrease in pressure stability of the composite, but this decrease is smaller the higher the proportion of the calcium carbonate component is. In vitro cytocompatibility studies of the foamed composites on MC3T3-E1 pre-osteoblasts revealed an excellent cytocompatibility. The in vitro degradation behaviour of foamed composite is characterised by a continuous loss of mass, which is slower with higher calcium carbonate contents. In a first pre-clinical pilot trial the foamed composite bone substitute material (fcm) was successfully evaluated in a model of vertical augmentation in an established animal model on the calvaria and on the lateral mandible of pigs.
Assuntos
Materiais Biocompatíveis/administração & dosagem , Desenvolvimento Ósseo/efeitos dos fármacos , Carbonato de Cálcio/administração & dosagem , Poliésteres/administração & dosagem , Poliuretanos/administração & dosagem , Células 3T3 , Animais , Materiais Biocompatíveis/química , Regeneração Óssea/efeitos dos fármacos , Substitutos Ósseos/administração & dosagem , Substitutos Ósseos/química , Carbonato de Cálcio/química , Linhagem Celular , Força Compressiva/efeitos dos fármacos , Feminino , Camundongos , Osteoblastos/efeitos dos fármacos , Osteogênese/efeitos dos fármacos , Projetos Piloto , Poliésteres/química , Poliuretanos/química , Porosidade , Suínos , Alicerces Teciduais/químicaRESUMO
Electrospun PLGA microfibers with adequate intrinsic physical features (fiber alignment and diameter) have been shown to boost teno-differentiation and may represent a promising solution for tendon tissue engineering. However, the hydrophobic properties of PLGA may be adjusted through specific treatments to improve cell biodisponibility. In this study, electrospun PLGA with highly aligned microfibers were cold atmospheric plasma (CAP)-treated by varying the treatment exposure time (30, 60, and 90 s) and the working distance (1.3 and 1.7 cm) and characterized by their physicochemical, mechanical and bioactive properties on ovine amniotic epithelial cells (oAECs). CAP improved the hydrophilic properties of the treated materials due to the incorporation of new oxygen polar functionalities on the microfibers' surface especially when increasing treatment exposure time and lowering working distance. The mechanical properties, though, were affected by the treatment exposure time where the optimum performance was obtained after 60 s. Furthermore, CAP treatment did not alter oAECs' biocompatibility and improved cell adhesion and infiltration onto the microfibers especially those treated from a distance of 1.3 cm. Moreover, teno-inductive potential of highly aligned PLGA electrospun microfibers was maintained. Indeed, cells cultured onto the untreated and CAP treated microfibers differentiated towards the tenogenic lineage expressing tenomodulin, a mature tendon marker, in their cytoplasm. In conclusion, CAP treatment on PLGA microfibers conducted at 1.3 cm working distance represent the optimum conditions to activate PLGA surface by improving their hydrophilicity and cell bio-responsiveness. Since for tendon tissue engineering purposes, both high cell adhesion and mechanical parameters are crucial, PLGA treated for 60 s at 1.3 cm was identified as the optimal construct.
Assuntos
Materiais Biocompatíveis , Células Epiteliais/citologia , Copolímero de Ácido Poliláctico e Ácido Poliglicólico/química , Células-Tronco/citologia , Engenharia Tecidual , Alicerces Teciduais/química , Âmnio/citologia , Animais , Materiais Biocompatíveis/química , Materiais Biocompatíveis/farmacologia , Adesão Celular , Diferenciação Celular , Células Cultivadas , Interações Hidrofóbicas e Hidrofílicas , Fenômenos Mecânicos , OvinosRESUMO
Phototherapeutic applications of carbon monoxide (CO)-releasing molecules are limited because they require harmful UV and blue light for activation. We describe two-photon excitation with NIR light (800â nm)-induced CO-release from two MnI tricarbonyl complexes bearing 1,8-naphthalimide units (1, 2). Complex 2 behaves as a logic OR gate in solution, nonwovens, and in HeLa cells. CO release, indicated by fluorescence enhancement, was detected in solution, nonwoven, and HeLa cells by single- (405â nm) and two-photon (800â nm) excitation. The photophysical properties of 1 and 2 have been measured and supported by DFT and TDDFT quantum chemical calculations. Both photoCORMs are stable in the dark in solution and noncytotoxic, leading to promising applications as phototherapeutics with NIR light.
RESUMO
Applicability of phototherapeutic CO-releasing molecules (photoCORMs) is limited because they are activated by harmful and poorly tissue-penetrating near-ultraviolet light. Here, a strategy is demonstrated to activate classical photoCORM Mn2(CO)10 using red light (635 nm). By mixing in solution a triplet photosensitizer (PS) with the photoCORM and shining red light, energy transfer occurs from triplet excited-state 3PS* to a photolabile triplet state of Mn2(CO)10, which, like under near-UV irradiation, led to complete release of carbonyls. Crucially, such "triplet-sensitized CO-release" occurred in solid-state materials: when PS and Mn2(CO)10 were embedded in electrospun nonwoven fabrics, CO was liberated upon irradiation with low-intensity red light (≤36 mW 635 nm).
Assuntos
Monóxido de Carbono/química , Cor , Luz , Compostos de Manganês/química , Compostos de Manganês/efeitos da radiação , Polímeros/química , Monóxido de Carbono/efeitos da radiação , Transferência de Energia/efeitos da radiação , Polímeros/efeitos da radiação , Raios Ultravioleta/efeitos adversosRESUMO
A series of estradiol-17-ß esters of N-(p-sulfomylbenzamide)-amino acids were prepared and evaluated for systemic and hepatic estrogenic activity after oral administration in ovariectomized rats. The alkyl substitution at nitrogen of amino acids such as proline or N-methyl-alanine produced compounds that exhibit potent oral activity. The proline analog (EC508) was further evaluated along with 17ß-estradiol (E2) and ethinyl-estradiol (EE) and compared their effects on the uterus, angiotensin and HDL-cholesterol after oral administration to ovariectomized female rats. Orally administered EC508 produced systemic estrogenic activity 10 times greater than EE and a 100 times higher activity than E2 with no influence on levels of angiotensin and HDL-cholesterol, whereas EE and E2 reduced the HDL-cholesterol and increased the angiotensine plasma levels. EC508 might offer significant advantages in indications like fertility control and HRT based on its high oral bioavailability and lack of hepatic estrogenicity.
Assuntos
Estradiol/metabolismo , Fígado/metabolismo , Pró-Fármacos/metabolismo , Absorção Fisiológica , Administração Oral , Animais , Estradiol/administração & dosagem , Estradiol/química , Feminino , Ovariectomia , Pró-Fármacos/administração & dosagem , Pró-Fármacos/química , Ratos , Ratos WistarRESUMO
Staphylococcus aureus is a leading pathogen in skin and skin structure infections, including surgical and traumatic infections that are associated with biofilm formation. Because biofilm formation is accompanied by high phenotypic resistance of the embedded bacteria, they are almost impossible to eradicate by conventional antibiotics. Therefore, alternative therapeutic strategies are of high interest. We generated nanostructured hybrid nonwovens via the electrospinning of a photoresponsive carbon monoxide (CO)-releasing molecule [CORM-1, Mn2(CO)10] and the polymer polylactide. This nonwoven showed a CO-induced antimicrobial activity that was sufficient to reduce the biofilm-embedded bacteria by 70% after photostimulation at 405 nm. The released CO increased the concentration of reactive oxygen species (ROS) in the biofilms, suggesting that in addition to inhibiting the electron transport chain, ROS might play a role in the antimicrobial activity of CORMs on S. aureus The nonwoven showed increased cytotoxicity on eukaryotic cells after longer exposure, most probably due to the released lactic acid, that might be acceptable for local and short-time treatments. Therefore, CO-releasing nonwovens might be a promising local antimicrobial therapy against biofilm-associated skin wound infections.
Assuntos
Antibacterianos/química , Antibacterianos/farmacologia , Biofilmes/efeitos dos fármacos , Monóxido de Carbono/química , Staphylococcus aureus/efeitos dos fármacos , Eletroquímica/métodos , Poliésteres/química , Espécies Reativas de Oxigênio/metabolismo , Staphylococcus aureus/metabolismoRESUMO
OBJECTIVES: The aim of the present study was to prepare resorbable polylactide fibers for periodontitis treatment using coaxial electrospinning to optimize the release of metronidazole (MNA) by reducing the initial burst effect. METHODS: Poly(L-lactide-co-D,L-lactide) (PLA) fibers mats with different distributions of metronidazole (MNA) were manufactured by coaxial electrospinning (COAX). By COAX spinning the central core of the fiber was enriched with 40% MNA (m/m), while the sheath of the fiber consisted of PLA only (test group). In contrast, fibers of the control group were prepared by conventional electrospinning with the same amount of MNA but with a homogenous drug distribution (HDD - homogenously distributed drug). The release of MNA was determined by analyzing aliquots from the fiber mats using UV-VIS spectroscopy. Agar diffusion tests were carried out to determine the antibacterial effect on periodontopathogenic bacteria. Biocompatibility was tested in direct contact to human gingival fibroblasts (HGF) for two days. RESULTS: The COAX mats showed a retarded drug release compared to the conventional HDD fibers. After 24 h, 64% of total MNA was released cumulatively from the COAX fibers while 90% of the MNA was released from the HDD fibers (controls). The antibacterial effect of COAX fibers was significantly higher after 24 h compared to the HDD fibers. Cell cultivation revealed significant higher numbers of vital cells among the COAX mats. SIGNIFICANCE: COAX fibers showed improved sustained MNA release compared to conventional fibers and can be seen as potential drug delivery systems in local periodontitis treatment.
Assuntos
Nanofibras , Periodontite , Humanos , Metronidazol/farmacologia , Nanofibras/química , Sistemas de Liberação de Medicamentos , Antibacterianos/farmacologia , Antibacterianos/química , Poliésteres/química , Periodontite/tratamento farmacológico , Liberação Controlada de FármacosRESUMO
The antibacterial activity of different antibiotic and metal-free thin polymer coatings was investigated. The films comprised quaternary ammonium compounds (QAC) based on a vinyl benzyl chloride (VBC) building block. Two monomeric QAC of different alkyl chain lengths were prepared, and then polymerized by two different polymerization processes to apply them onto Ti surfaces. At first, the polymeric layer was generated directly on the surface by atom transfer radical polymerization (ATRP). For comparison purposes, in a classical route a copolymerization of the QAC-containing monomers with a metal adhesion mediating phosphonate (VBPOH) monomers was carried out and the Ti surfaces were coated via drop coating. The different coatings were characterized by X-ray photoelectron spectroscopy (XPS) illustrating a thickness in the nanomolecular range. The cytocompatibility in vitro was confirmed by both live/dead and WST-1 assay. The antimicrobial activity was evaluated by two different assays (CFU and BTG, resp.,), showing for both coating processes similar results to kill bacteria on contact. These antibacterial coatings present a simple method to protect metallic devices against microbial contamination.
RESUMO
Coronaviruses (CoVs) are common among humans and many animals, causing respiratory or gastrointestinal diseases. Currently, only a few antiviral drugs against CoVs are available. Especially for SARS-CoV-2, new compounds for treatment of COVID-19 are urgently needed. In this study, we characterize the antiviral effects of two high-sulfated glycosaminoglycan (GAG) derivatives against SARS-CoV-2 and bovine coronaviruses (BCoV), which are both members of the Betacoronavirus genus. The investigated compounds are based on hyaluronan (HA) and chondroitin sulfate (CS) and exhibit a strong inhibitory effect against both CoVs. Yield assays were performed using BCoV-infected PT cells in the presence and absence of the compounds. While the high-sulfated HA (sHA3) led to an inhibition of viral growth early after infection, high-sulfated CS (sCS3) had a slightly smaller effect. Time of addition assays, where sHA3 and sCS3 were added to PT cells before, during or after infection, demonstrated an inhibitory effect during all phases of infection, whereas sHA3 showed a stronger effect even after virus absorbance. Furthermore, attachment analyses with prechilled PT cells revealed that virus attachment is not blocked. In addition, sHA3 and sCS3 inactivated BCoV by stable binding. Analysis by quantitative real-time RT PCR underlines the high potency of the inhibitors against BCoV, as well as B.1-lineage, Alpha and Beta SARS-CoV-2 viruses. Taken together, these results demonstrated that the two high-sulfated GAG derivatives exhibit low cytotoxicity and represent promising candidates for an anti-CoV therapy.
Assuntos
Antivirais/farmacologia , Infecções por Coronavirus/veterinária , Coronavirus Bovino/efeitos dos fármacos , Glicosaminoglicanos/farmacologia , SARS-CoV-2/efeitos dos fármacos , Animais , Bovinos , Linhagem Celular , Sulfatos de Condroitina/química , Sulfatos de Condroitina/farmacologia , Infecções por Coronavirus/tratamento farmacológico , Glicosaminoglicanos/química , Glicosaminoglicanos/metabolismo , Humanos , Ácido Hialurônico/química , Ácido Hialurônico/farmacologia , Sulfatos/química , Sulfatos/farmacologia , Ligação Viral/efeitos dos fármacos , Tratamento Farmacológico da COVID-19RESUMO
It is demonstrated that water-soluble, glucosylated poly(pentafluorostyrene) derivatives revealed favorable coating material properties for magnetic iron oxide nanoparticles. To prepare the coating material in high reproducibility and purity as well as in sufficient amounts, a new route of synthesis is established. The preparation and characterization of the glucosylated, tetrafluorostyryl monomer, by thiol-para-fluorine "click" reaction, and its polymerization, via nitroxide-mediated radical process, is presented in detail. In addition, the coating material and the resulting particle properties are investigated by means of XPS, DLS, TGA, TEM, and cryo-TEM as well as flow cytometry. The glycopolymer acts as an appropriate stabilizing agent for the superparamagnetic nanoparticles by the formation of an approximately 10 nm thick shell, as shown by the XPS analysis. Furthermore, the application of FITC-labeled glycopolymer yielded fluorescent, superparamagnetic nanoparticles, which can be used for monitoring cell-carbohydrate interactions, because these particles show no cytotoxicity toward 3T3 fibroblasts.
Assuntos
Materiais Revestidos Biocompatíveis/síntese química , Magnetismo , Polimerização , Tioglicosídeos/química , Células 3T3 , Animais , Carboidratos , Citometria de Fluxo , Fluorescência , CamundongosRESUMO
Electrospun poly(lactic-co-glycolic acid) (PLGA) scaffolds with highly aligned fibers (ha-PLGA) represent promising materials in the field of tendon tissue engineering (TE) due to their characteristics in mimicking fibrous extracellular matrix (ECM) of tendon native tissue. Among these properties, scaffold biodegradability must be controlled allowing its replacement by a neo-formed native tendon tissue in a controlled manner. In this study, ha-PLGA were subjected to hydrolytic degradation up to 20 weeks, under di-H2O and PBS conditions according to ISO 10993-13:2010. These were then characterized for their physical, morphological, and mechanical features. In vitro cytotoxicity tests were conducted on ovine amniotic epithelial stem cells (oAECs), up to 7 days, to assess the effect of non-buffered and buffered PLGA by-products at different concentrations on cell viability and their stimuli on oAECs' immunomodulatory properties. The ha-PLGA scaffolds degraded slowly as evidenced by a slight decrease in mass loss (14%) and average molecular weight (35%), with estimated degradation half-time of about 40 weeks under di-H2O. The ultrastructure morphology of the scaffolds showed no significant fiber degradation even after 20 weeks, but alteration of fiber alignment was already evident at week 1. Moreover, mechanical properties decreased throughout the degradation times under wet as well as dry PBS conditions. The influence of acid degradation media on oAECs was dose-dependent, with a considerable effect at 7 days' culture point. This effect was notably reduced by using buffered media. To a certain level, cells were able to compensate the generated inflammation-like microenvironment by upregulating IL-10 gene expression and favoring an anti-inflammatory rather than pro-inflammatory response. These in vitro results are essential to better understand the degradation behavior of ha-PLGA in vivo and the effect of their degradation by-products on affecting cell performance. Indeed, buffering the degradation milieu could represent a promising strategy to balance scaffold degradation. These findings give good hope with reference to the in vivo condition characterized by physiological buffering systems.
Assuntos
Ácidos/química , Âmnio/citologia , Células Epiteliais/citologia , Imunomodulação , Copolímero de Ácido Poliláctico e Ácido Poliglicólico/química , Células-Tronco/citologia , Engenharia Tecidual , Alicerces Teciduais/química , Animais , Forma Celular , Condutividade Elétrica , Concentração de Íons de Hidrogênio , Interleucina-10/metabolismo , Interleucina-12/metabolismo , Peso Molecular , OvinosRESUMO
Electrospinning is a long-known polymer processing technique that has received more interest and attention in recent years due to its versatility and potential use in the field of biomedical research. The fabrication of three-dimensional (3D) electrospun matrices for drug delivery and tissue engineering is of particular interest. In the present study, we identified optimal conditions to generate novel electrospun polymeric scaffolds composed of poly-D/L-lactide and poly-L-lactide in the ratio 50:50. Scanning electron microscopic analyses revealed that the generated poly(D/L-lactide-co-L-lactide) electrospun hybrid microfibers possessed a unique porous high surface area mimicking native extracellular matrix (ECM). To assess cytocompatibility, we isolated dermal fibroblasts from human skin biopsies. After 5 days of in vitro culture, the fibroblasts adhered, migrated and proliferated on the newly created 3D scaffolds. Our data demonstrate the applicability of electrospun poly(D/L-lactide-co-L-lactide) scaffolds to serve as substrates for regenerative medicine applications with special focus on skin tissue engineering.
Assuntos
Poliésteres/química , Engenharia TecidualRESUMO
Injured tendons are challenging in their regeneration; thus, tissue engineering represents a promising solution. This research tests the hypothesis that the response of amniotic epithelial stem cells (AECs) can be modulated by fiber diameter size of tendon biomimetic fleeces. Particularly, the effect of electrospun poly(lactide-co-glycolide) (PLGA) fleeces with highly aligned microfibers possessing two different diameter sizes (1.27 and 2.5 µm: ha1- and ha2-PLGA, respectively) was tested on the ability of AECs to differentiate towards the tenogenic lineage by analyzing tendon related markers (Collagen type I: COL1 protein and mRNA Scleraxis: SCX, Tenomodulin: TNMD and COL1 gene expressions) and to modulate their immunomodulatory properties by investigating the pro- (IL-6 and IL-12) and anti- (IL-4 and IL-10) inflammatory cytokines. It was observed that fiber alignment and not fiber size influenced cell morphology determining the morphological change of AECs from cuboidal to fusiform tenocyte-like shape. Instead, fleece mechanical properties, cell proliferation, tenogenic differentiation, and immunomodulation were regulated by changing the ha-PLGA microfiber diameter size. Specifically, higher DNA quantity and better penetration within the fleece were found on ha2-PLGA, while ha1-PLGA fleeces with small fiber diameter size had better mechanical features and were more effective on AECs trans-differentiation towards the tenogenic lineage by significantly translating more efficiently SCX into the downstream effector TNMD. Moreover, the fiber diameter of 1.27 µm induced higher expression of pro-regenerative, anti-inflammatory interleukins mRNA expression (IL-4 and IL-10) with favorable IL-12/IL-10 ratio with respect to the fiber diameter of 2.5 µm. The obtained results demonstrate that fiber diameter is a key factor to be considered when designing tendon biomimetic fleece for tissue repair and provide new insights into the importance of controlling matrix parameters in enhancing cell differentiation and immunomodulation either for the cells functionalized within or for the transplanted host tissue.
Assuntos
Âmnio/citologia , Materiais Biomiméticos/farmacologia , Diferenciação Celular/efeitos dos fármacos , Fatores Imunológicos/farmacologia , Copolímero de Ácido Poliláctico e Ácido Poliglicólico/química , Células-Tronco/imunologia , Tendões/citologia , Engenharia Tecidual , Animais , Anti-Inflamatórios/farmacologia , Proliferação de Células/efeitos dos fármacos , Forma Celular/efeitos dos fármacos , Sobrevivência Celular/efeitos dos fármacos , Células Epiteliais/citologia , Células Epiteliais/efeitos dos fármacos , Células Epiteliais/metabolismo , Interleucinas/farmacologia , Ovinos , Espectroscopia de Infravermelho com Transformada de Fourier , Células-Tronco/citologia , Células-Tronco/efeitos dos fármacos , Células-Tronco/metabolismoRESUMO
Background. The design of tendon biomimetic electrospun fleece with Amniotic Epithelial Stem Cells (AECs) that have shown a high tenogenic attitude may represent an alternative strategy to overcome the unsatisfactory results of conventional treatments in tendon regeneration. Methods. In this study, we evaluated AEC-engineered electrospun poly(lactide-co-glycolide) (PLGA) fleeces with highly aligned fibers (ha-PLGA) that mimic tendon extracellular matrix, their biocompatibility, and differentiation towards the tenogenic lineage. PLGA fleeces with randomly distributed fibers (rd-PLGA) were generated as control. Results. Optimal cell infiltration and biocompatibility with both PLGA fleeces were shown. However, only ha-PLGA fleeces committed AECs towards an Epithelial-Mesenchymal Transition (EMT) after 48 h culture, inducing their cellular elongation along the fibers' axis and the upregulation of mesenchymal markers. AECs further differentiated towards tenogenic lineage as confirmed by the up-regulation of tendon-related genes and Collagen Type 1 (COL1) protein expression that, after 28 days culture, appeared extracellularly distributed along the direction of ha-PLGA fibers. Moreover, long-term co-cultures of AEC-ha-PLGA bio-hybrids with fetal tendon explants significantly accelerated of half time AEC tenogenic differentiation compared to ha-PLGA fleeces cultured only with AECs. Conclusions. The fabricated tendon biomimetic ha-PLGA fleeces induce AEC tenogenesis through an early EMT, providing a potential tendon substitute for tendon engineering research.
Assuntos
Âmnio/citologia , Materiais Biomiméticos/farmacologia , Diferenciação Celular/efeitos dos fármacos , Células Epiteliais/citologia , Transição Epitelial-Mesenquimal/efeitos dos fármacos , Copolímero de Ácido Poliláctico e Ácido Poliglicólico/farmacologia , Células-Tronco/citologia , Tendões/citologia , Engenharia Tecidual , Animais , Proliferação de Células/efeitos dos fármacos , Sobrevivência Celular/efeitos dos fármacos , Células Epiteliais/efeitos dos fármacos , Células Epiteliais/metabolismo , Transição Epitelial-Mesenquimal/genética , Regulação da Expressão Gênica/efeitos dos fármacos , Ovinos , Células-Tronco/efeitos dos fármacos , Células-Tronco/metabolismoRESUMO
Two major aspects need to be focused to accelerate wound healing of mucosal damages especially in the field of otorhinolaryngology. (i) The problem of application due to the small access during surgery, (ii) the fixation of the wound dressing to reveal a stable healing process. In the present work the high request to a mucosal wound dressing which additionally support hemostasis was addressed. We developed an electrospun fabric made of poly(l-lactide-co-d/l-lactide) (PLA) which can be loaded with the hemostatic agents adrenaline and tranexamic acid to cover mucosal lesions analogues to common skin patches. These loaded electrospun fabrics were demonstrated to be biocompatible, thin and flexible, and thus could be adapted individually to the mucosal defect with respect to localization and size of the lesion. The treatment of mucosal defects with these loaded PLA wound dressings induced a faster and time controlled hemostatic reaction, which significantly improved the healing process.
Assuntos
Bandagens , Poliésteres/química , Poliésteres/farmacologia , Mucosa Respiratória/lesões , Cicatrização , Animais , Feminino , Células HeLa , Humanos , Camundongos , Coelhos , Mucosa Respiratória/patologiaRESUMO
Levan is a high molecular weight fructose-based biotechnologically available polysaccharide with a range of interesting properties qualifying this molecule for applications in biomedicine. In this study, new levan derivatives containing methacrylate groups attached either via ester or urethane linkages to the fructan backbone could be synthesized and structurally characterized by conventional analytical techniques. The photochemical crosslinking of these substances applying different photoinitiator systems and reaction conditions resulted in hydrogels of diverse properties which were investigated with regard to mechanical behaviour, hydrolytic degradability, and cytocompatibility. It was found that crosslinkable levan derivatives represent a new class of promising biopolymer-based macromers broadening the spectrum of available biomaterials to facilitate the adaption to the requirements of specific applications.
Assuntos
Frutanos/química , Hidrogéis/química , Metacrilatos/química , Polissacarídeos/química , Materiais Biocompatíveis/síntese química , Materiais Biocompatíveis/química , Reagentes de Ligações Cruzadas/química , Frutose/química , Hidrogéis/síntese química , Processos Fotoquímicos , Polietilenoglicóis/química , Polissacarídeos/síntese químicaRESUMO
Bactericidal materials gained interest in the health care sector as they are capable of preventing material surfaces from microbial colonization and subsequent spread of infections. However, commercialization of antimicrobial materials requires proof of their efficacy, which is usually done using in vitro methods. The ISO 22196 standard (Japanese test method JIS Z 2801) is a method for measuring the antibacterial activity of daily goods. As it was found reliable for testing the biocidal activity of antimicrobially active materials and surface coatings most of the laboratories participating in this study used this protocol. Therefore, a round robin test for evaluating antimicrobially active biomaterials had to be established. To our knowledge, this is the first report on inaugurating a round robin test for the ISO 22196 / JIS Z 2801. The first round of testing showed that analyses in the different laboratories yielded different results, especially for materials with intermediate antibacterial effects distinctly different efficacies were noted. Scrutinizing the protocols used by the different participants and identifying the factors influencing the test outcomes the approach was unified. Four critical factors influencing the outcome of antibacterial testing were identified in a series of experiments: (1) incubation time, (2) bacteria starting concentration, (3) physiological state of bacteria (stationary or exponential phase of growth), and (4) nutrient concentration. To our knowledge, this is the first time these parameters have been analyzed for their effect on the outcome of testing according to ISO 22196 / JIS Z 2801. In conclusion, to enable assessment of the results obtained it is necessary to evaluate these single parameters in the test protocol carefully. Furthermore, uniform and robust definitions of the terms antibacterial efficacy / activity, bacteriostatic effects, and bactericidal action need to be agreed upon to simplify communication of results and also regulate expectations regarding antimicrobial tests, outcomes, and materials.
Assuntos
Testes de Sensibilidade Microbiana/normas , Anti-Infecciosos/farmacologia , Análise Fatorial , Humanos , Testes de Sensibilidade Microbiana/métodos , Reprodutibilidade dos TestesRESUMO
In vitro-generated soft tissue could provide alternate therapies for soft tissue defects. The aim of this study was to evaluate methacrylated gelatin/hyaluronan as scaffolds for soft tissue engineering and their interaction with human adipose-derived stem cells (hASCs). ASCs were incorporated into methacrylated gelatin/hyaluronan hydrogels. The gels were photocrosslinked with a lithium phenyl-2,4,6-trimethylbenzoylphosphinate photoinitiator and analyzed for cell viability and adipogenic differentiation of ASCs over a period of 30 days. Additionally, an angiogenesis assay was performed to assess their angiogenic potential. After 24 h, ASCs showed increased viability on composite hydrogels. These results were consistent over 21 days of culture. By induction of adipogenic differentiation, the mature adipocytes were observed after 7 days of culture, their number significantly increased until day 28 as well as expression of fatty acid binding protein 4 and adiponectin. Our scaffolds are promising as building blocks for adipose tissue engineering and allowed long viability, proliferation, and differentiation of ASCs.
RESUMO
OBJECTIVE: Our study was performed with the aim of preparing electrospun polylactide fibers with a combination of ampicillin (AMP) and metronidazole (MNZ) and investigating their drug release behavior and the antibacterial effect on Aggregatibacter actinomycetemcomitans and other oral pathogens. METHODS: AMP and MNZ were integrated as a combination in two separate fibers (dual fiber mats - DFW mix) of electrospun PLA fiber mats by means of multijet electrospinning and in a single fiber (single fiber mats - SFW mix). HPLC (high-performance liquid chromatography) was used to measure the released drug quantities. Agar diffusion tests were used to determine the antibacterial effect of the eluates on A. actinomycetemcomitans, Fusobacterium nucleatum, Porphyromonas gingivalis and Enterococcus faecalis. The neutral red test was made to examine the cytocompatibility of the eluates with human gingival fibroblasts (hGFs). RESULTS: The release of the active agents varied with the antibiotic concentrations initially used in the fiber mats, but also with the distribution of the active agents in one or two fibers. Of the total quantity of MNZ (AMP), the SFW mix fiber mats released >60% (>70%) within a span of 5min, and 76% (71%) after 96h. With these drug concentrations released by the fiber mats (≥5m%), an antibacterial effect was achieved on A. actinomycetemcomitans and on all other species tested. Fiber mats and their eluates have no cytotoxic influence on human gingival fibroblasts (hGFs). SIGNIFICANCE: Electrospun AMP/MNZ-loaded polymer fibers are a potential drug delivery system for use in periodontal and endodontic infections.