RESUMO
BACKGROUND: Electrospun (e-spun) nanofibers for wound dressing have attracted wide attention due to its large specific surface area, large porosity and breathability. Compared with solution electrospinning (e-spinning), melt e-spinning is more bio-friendly without toxic solvent participation, which provides the possibility of in situ e-spinning on wounds directly. However, previously reported melt e-spinning devices were usually bulky and cumbersome due to their necessary heating unit, and different components were separated to avoid electrostatic interference. RESULTS: In this article, we report on a self-powered hand-held melt e-spinning gun which can work without any external power supply (outdoors). The problem of electrostatic interference for this integrated device was solved by using a special high heat transfer insulation unit. The apparatus is easy and safe to operate by a single hand due to its small volume (24 × 6 × 13 cm3) and light weight (about 450 g). Some biodegradable polymers, for example, polycaprolactone (PCL) fibers were successful e-spun onto wounds directly by using this dressing gun. CONCLUSIONS: PCL fibrous membrane has good biocompatibility and can be in situ electrospun to wound surface as a wound dressing by the portable melt e-spinning gun. Besides wound dressing, this hand-held melt e-spinning gun may be used in 3D printing and experimental teaching demonstration aids.
Assuntos
Bandagens , Técnicas Eletroquímicas , Nanofibras , Animais , Sobrevivência Celular/efeitos dos fármacos , Células Cultivadas , Técnicas Eletroquímicas/instrumentação , Técnicas Eletroquímicas/métodos , Desenho de Equipamento , Fibroblastos/efeitos dos fármacos , Masculino , Nanofibras/química , Nanofibras/toxicidade , Poliésteres/química , Poliésteres/toxicidade , Porosidade , Ratos , Ratos Sprague-Dawley , TemperaturaRESUMO
PURPOSE: Acute paraplegia due to thoracic intervertebral disc protrusion and calcification is rare. The purpose of this study was to report two cases with acute paraplegia due to a calcified thoracic disc prolapse, and discuss its clinical diagnosis and surgical treatment with literature reviews. METHODS: These two cases were verified by patient history, physical examination, laboratory examination, CT and MRI studies, and pathological findings. RESULTS: CT scan revealed disc calcification and protrusion at the T11-12 level in case 1 and at the T10-11 level in case 2, respectively. MRI images revealed severe spinal cord compression with a hyperintense central core and surrounding hypointense area in two cases, which were directly connected to the calcified intervertebral nucleus pulposus. Pathological examination revealed calcium deposition. Patients underwent discectomy followed by interbody fusion, and satisfactory therapeutic outcomes were obtained. CONCLUSIONS: We suggest that decompression surgery should be carried out as early as possible for patients with early spinal myelopathy or paraplegia caused by a calcified protruded disc.
Assuntos
Calcinose/diagnóstico por imagem , Deslocamento do Disco Intervertebral/diagnóstico por imagem , Disco Intervertebral/diagnóstico por imagem , Paraplegia/etiologia , Vértebras Torácicas/diagnóstico por imagem , Dor nas Costas/etiologia , Calcinose/cirurgia , Humanos , Disco Intervertebral/cirurgia , Deslocamento do Disco Intervertebral/cirurgia , Imageamento por Ressonância Magnética , Masculino , Pessoa de Meia-Idade , Compressão da Medula Espinal/etiologia , Vértebras Torácicas/cirurgia , Tomografia Computadorizada por Raios XRESUMO
OBJECTIVE: To investigate the value of bone marrow-mesenchymal stem cells (BM-MSCs) transformed by nucleus pulposus (NPs) for construction of tissue engineering disc. METHODS: BM-MSCs and fetal NPs were cultured in vitro, planted on polylactic acid-polyglycolic acid copolymer (PLGA), and observed with inverted microscope and scanning electronic microscope. PLGA scaffolds with adherent BM-MSCs and NPs, as well as BM-MSCs and NPs suspension were implanted into intervertebral discs of New Zealand white rabbits, respectively. Intervertebral signal intensity was evaluated by Thompson grading 12 weeks later. Proteoglycan and type IIcollagen were determined by spectrophotometric method and immunohistochemistry, respectively. RESULTS: Spindle or multi-angular BM-MSCs turned into fibro-like phenotype coculture of BM-MSCs and NPs, which grew well with normal morphology when they attached on PLGA scaffolds. There was statistical difference in intervertebral signal intensity, and the expression of proteoglycan and type IIcollagen between PLGA scaffolds group and control group (P < 0.05), the content of proteoglycan was (3.93 ± 0.31) mg/100 mg in the PLGA scaffolds group whereas (3.52 ± 0.26) mg/100 mg in the control group. CONCLUSIONS: BM-MSCs can be induced into NPs by cocultivation, and PLGA scaffolds can provide good growing conditions, and maintain high mechanical properties and spacial structure which meet the requirement of tissue engineering disc to prevent degeneration.
Assuntos
Disco Intervertebral/citologia , Engenharia Tecidual/métodos , Alicerces Teciduais , Animais , Células Cultivadas , Humanos , Ácido Láctico , Células-Tronco Mesenquimais/citologia , Ácido Poliglicólico , Copolímero de Ácido Poliláctico e Ácido Poliglicólico , CoelhosRESUMO
INTRODUCTION: This study aimed to investigate the expression of a 70-kDa heat shock protein [heat shock 70-kDa protein 8 (HSPA8)/heat shock protein 70 (Hsc70)] in human degenerative lumbar intervertebral discs and its relationship with the degree of degeneration of human intervertebral discs. METHODS: A total of 72 cases of lumbar intervertebral disc nucleus pulposus tissues were collected. Among these, 18 cases of nucleus pulposus tissue were assigned to the control group, while 54 cases of nucleus pulposus tissues were assigned to the experimental group. According to the preoperative MRI, cases in the experimental group were further divided into three groups: protrusion group (n = 18), extrusion group (n = 18), and sequestration group (n = 18). Western blot was performed to determine the relative expression of HSPA8 in the nucleus pulposus in each group. Hematoxylin and eosin staining was performed to determine the number of nucleus pulposus cells, morphological differences, and cell densities of the degenerated intervertebral discs and normal intervertebral discs. Immunohistochemistry was performed to determine the expression of HSPA8 in nucleus pulposus tissues in each group. RESULTS: Hematoxylin and eosin staining results: There were significant differences in cell morphology and number between the control group and the experimental group. Furthermore, there were significant differences in cell density (F = 936.80, P < 0.01). Immunohistochemistry results: HSPA8 was expressed in lumbar intervertebral disc nucleus pulposus tissues, and its expression of gradually decreased with the severity of the disease, and the differences were significant (F = 2110.43, P < 0.01). Western blot results: The expression of HSPA8 in human degenerative nucleus pulposus tissues gradually decreased, and the differences were significant (F = 1841.72, P < 0.01). CONCLUSION: HSPA8 is stably expressed in human intervertebral disc nucleus pulposus tissues, and its expression is associated with the degree of intervertebral disc degeneration.
Assuntos
Proteínas de Choque Térmico HSC70/genética , Degeneração do Disco Intervertebral/fisiopatologia , Disco Intervertebral/fisiopatologia , Vértebras Lombares/anatomia & histologia , Vértebras Lombares/fisiopatologia , Núcleo Pulposo/anatomia & histologia , Núcleo Pulposo/fisiopatologia , Adulto , Idoso , Idoso de 80 Anos ou mais , Western Blotting , Feminino , Expressão Gênica , Humanos , Imuno-Histoquímica , Imageamento por Ressonância Magnética , Masculino , Pessoa de Meia-IdadeRESUMO
The traditional 2D culture medium used for simulating the in vitro microenvironment for leukemia cells usually leads to 95% of the drug test results being different to the subsequent clinical results. Unlike this 2D culture, 3D scaffolds are more similar to the bone marrow microenvironment so can better simulate the drug effect on leukemia cells, which can benefit the preliminary screening of drugs for clinical use. For this purpose, the freeze-drying method was proposed for the fabrication of 3D scaffolds of graphene oxide/silk fibroin/carboxymethyl chitosan (GO/SF/CMCS). Experimental results show that these 3D scaffolds exhibit a better swelling ratio because of the embedding of GO. The improved hydrophilicity of the scaffolds brings about promoted adhesion and proliferation of leukemia cells. In contrast to the traditional 2D culture, leukemia cells in this 3D culture show stronger drug resistance, which is consistent with the previously reported clinical results. It implies that these 3D GO/SF/CMCS scaffolds can simulate well the in vivo bone marrow microenvironment, making it a promising platform for preliminary drug screening for clinical use.
Assuntos
Células da Medula Óssea/citologia , Medula Óssea/efeitos dos fármacos , Ensaios de Seleção de Medicamentos Antitumorais , Leucemia/tratamento farmacológico , Porosidade , Engenharia Tecidual/métodos , Animais , Materiais Biocompatíveis , Bombyx , Proliferação de Células , Sobrevivência Celular , Quitosana/análogos & derivados , Quitosana/química , Meios de Cultura , Resistencia a Medicamentos Antineoplásicos , Fibroínas/química , Grafite/química , Humanos , Interações Hidrofóbicas e Hidrofílicas , Técnicas In Vitro , Células Jurkat , Microscopia Eletrônica de Varredura , Espectroscopia de Infravermelho com Transformada de Fourier , Análise Espectral Raman , Alicerces Teciduais/química , Microambiente TumoralRESUMO
Magnetic fibrous membrane used to generate heat under the alternating magnetic field (AMF) has attracted wide attention due to their application in magnetic hyperthermia. However, there is not magnetic fibrous membrane prepared by melt electrospinning (e-spinning) which is a solvent-free, bio-friendly technology. In this work, polycaprolactone (PCL)/Fe3O4 fiber membrane was prepared by melt e-spinning and using homemade self-powered portable melt e-spinning apparatus. The hand-held melt e-spinning apparatus has a weight of about 450 g and a precise size of 24 cm in length, 6 cm in thickness and 13 cm in height, which is more portable for widely using in the medical field. The PCL/Fe3O4 composite fibers with diameters of 4-17 µm, are very uniform. In addition, the magnetic composite fiber membrane has excellent heating efficiency and thermal cycling characteristics. The results indicated that self-powered portable melt e-spinning apparatus and PCL/Fe3O4 fiber membrane may provide an attractive way for hyperthermia therapy.
Assuntos
Hipertermia Induzida , Nanopartículas Magnéticas de Óxido de Ferro/química , Membranas Artificiais , Nanofibras/química , Poliésteres/química , Humanos , Nanopartículas Magnéticas de Óxido de Ferro/ultraestrutura , Nanofibras/ultraestruturaRESUMO
The present study examined the effects of transforming growth factor (TGF)-ß3, connective tissue growth factor (CTGF) and tissue inhibitor of metalloproteinase 1 (TIMP1) gene transduction, using a lentiviral vector, on rabbit intervertebral disc degeneration in vivo, with the intention of investigating their potential use in gene therapy. A model of lumbar intervertebral disc degeneration was created by needle puncture into the annulus fibrosus of 15 New Zealand white rabbits. Empty lentivirus or recombinant lentiviral plasmid lenti-TGFß3-P2A-CTGF-T2A-TIMP1 was injected into degenerative lumbar intervertebral discs (representing the control and experimental groups, respectively), whilst untreated degenerative lumbar intervertebral discs served as the puncture group. After 16 and 20 weeks, magnetic resonance imaging (MRI) was conducted and the changes in intensity on micrographs of degenerative intervertebral discs were measured. The mRNA levels of aggrecan and type II collagen in nucleus pulposus tissue were determined by reverse transcription-polymerase chain reaction, and protein expression levels of type II collagen and aggrecan were determined by western blot analysis. MRI results indicated that intervertebral disc degeneration was ameliorated in the experimental group when compared with the control and the puncture group. Furthermore, the expression levels of type II collagen and aggrecan in the puncture and control groups were significantly lower than in the experimental group (P<0.05). In conclusion, lenti-TGFß3-P2A-CTGF-T2A-TIMP1 co-transduction can promote synthesis of aggrecan and type II collagen in degenerative intervertebral discs, thereby delaying intervertebral disc degeneration. These results indicate the potential of gene therapy in treatment of intervertebral disc degeneration.
RESUMO
The aim of the study was to introduce a method of one stage laminoplasty and posterior herniotomy for myelopathy caused by cervical stenosis with cervical disc herniation and to evaluate the clinical efficacy of this surgery. From 1999 to 2008, 18 patients with myelopathy caused by cervical stenosis with cervical disc herniation who underwent this procedure were included. The average age was 63 years (range 48-74 years), and the average follow-up period was 46 months (range 3-108 months). Neurologic status was evaluated using the JOA scoring system. Neurological symptoms improvement was seen in all patients after surgery. The average JOA score was 14.22±1.86 by final follow-up, which was higher than preoperative values (P<0.01), and the average improvement in neurological function was 76.63%. Neurologic examination showed that excellent results had been obtained by 10 patients, good results by 8 patients, with no fair or poor results. 2 patients developed cerebrospinal fluid leakage after surgery and recovered during the follow-up period. One patient with cervical disc herniation developed postoperative C5 palsy on the axle side on the third day after surgery. She completely recovered by 1 month after surgery. No other patients experienced postoperative neurologic complications. Complete anterior and posterior decompression of the spinal cord was achieved after surgery. We concluded that one stage laminoplasty and posterior herniotomy is an effective, reliable, and safe procedure for the treatment of myelopathy caused by cervical stenosis with cervical disc herniation.