RESUMO
The optical properties of aligned nickel nanowire arrays (NiNWAs) with different degrees of oxidation for terahertz (THz) polarizer applications have been investigated by using THz time-domain spectroscopy. In frequency-domain spectra, the full width at half maxima of transmitted peaks was broadened and the peak positions have a blue shift with increasing oxidation levels, besides the enhancement in peak intensity. It is indicated that the oxidation of Ni nanowires (NWs) has a significant influence on the interaction between Ni NWs and THz wave. The transmittance of the aligned NiNWAs increases with annealing temperature increasing. Conversely, the degree of polarization and extinction ratio (ER) decreases. A corresponding relationship between the change of ER and degree of oxidation is summarized by means of thermogravimetric analysis. The change of ER for the annealing sample with the degree of oxidation of 0.507% is 27.32%, which induced the polarization properties of aligned NiNWAs to be sensitive to the oxidation of Ni NWs. These findings can provide new positive features in the development of future polarization-based device applications for THz electronics and photonics.
RESUMO
We present a broadband terahertz (THz) polarizer based on the stacks of aligned Ni nanowire (NW) arrays. We demonstrated that the polarizer has an extinction ratio of 58.8 dB and an average extinction ratio of 46.6 dB throughout a frequency range of 0.3-2.3 THz. Compared to carbon-nanotube and metallic wire-grid polarizers, our Ni-NW polarizers with rapid, reliable, low-cost fabrication processes are ideal candidates for emerging THz technologies.
RESUMO
Aligned Ni nanowire (NW) arrays were investigated for terahertz (THz) wave modulation. By adjusting the NW density and order of the NW arrays, the resonant frequency and intensity of the THz waves can be effectively tuned. The tuning range of the resonant frequency is about 0.29 THz, and a transmittance of less than 40% in the frequency region from 0.5 to 2 THz is achieved by changing the NW density. Although the order of the NW arrays has no influence on the resonant frequency, the transmittance can be tuned about 21%. The ability to tune the intensity and resonant frequency effectively and the ease of fabrication of the Ni-NW arrays make them the potential candidates for THz tunable filters, intensity modulators, and spatial light modulators.
RESUMO
High-quality monolayer graphene was synthesized on high-κ dielectric single crystal SrTiO3 (STO) substrates by a facile metal-catalyst-free chemical vapor deposition process. The as-grown graphene sample was suitable for fabricating a high performance field-effect transistor (FET), followed by a far lower operation voltage compared to that of a SiO2-gated FET and carrier motilities of approximately 870-1050 cm(2)·V(-1)·s(-1) in air at rt. The directly grown high-quality graphene on STO makes it a perfect candidate for designing transfer-free, energy-saving, and batch production of FET arrays.
RESUMO
Shock loads can pose a great threat to personnel or instruments, and efficient control of the buffering process is an effective means of reducing damage from shock energy. In this paper, magneto-rheological grease was used as the internal controllable material of the buffer to address the turbulence and settling problems of conventional magneto-rheological fluid. A bending and folding back magnetic circuit is proposed, and the magnetic circuit simulation was verified. The corresponding dynamic mechanical model was established, and the mechanical response characteristics of the buffer under impact load were also simulated dynamically. The mechanical properties of the designed and processed device were tested, and a variable current control method was used to improve the performance of the shock resistance of the buffer. The response of the magnetorheological grease buffer under different drop hammer impacts was investigated. The buffering effect and controllability of the buffer were analyzed by comparing the acceleration, velocity, and top-end cap displacement at the same drop hammer height for different current magnitudes. The results show that the buffer performance of the buffer gradually improved as the current increased. The response time of the designed new magnetorheological buffer was determined by the jump time of the peak damping force to be 9 ms. Lastly, the controllability was verified by manually and automatically adjusting the current magnitude, and the results were compared with those at 300 mm drop hammer height and 0.5 A current magnitude, and the continuous variable current control was found to be effective. This provides a feasible reference for scholars to study optimal buffer control.
RESUMO
Micro-tools comprising difficult-to-machine materials have seen widespread application in micro-manufacturing to satisfy the demands of micro-part processing and micro-device development. Taking micro-shafts as an example, the related developmental technology, based on wire electric discharge grinding (WEDG) as the core method, is one of the key technologies used to prepare high-precision micro-shafts. To enable efficient and high-precision machining of micro-shafts with target diameters, instead of performing multiple repeated on-machine measurements and reprocessing, a geometric constraint strategy is proposed based on the previously introduced twin-mirroring-wire tangential feed electrical discharge grinding (TMTF-WEDG). This strategy encompasses the tool setting method, tangential feed distance compensation, and an equation that establishes the relationship between tangential distance and diameter variation. These components are derived from a key points analysis of the geometric constraints. The micro-shafts with diameters of 50 µm and consistencies of ±1.5 µm are repeatedly processed. A series of micro-shafts with diameters ranging from 30 µm to 120 µm achieve geometric constraints with a diameter accuracy of ±2 µm, accompanied by the complete continuous automation of the entire process. Accordingly, it can be concluded that the geometric constraint strategy is flexible and stable and can be controlled with high precision in the TMTF-WEDG process.
RESUMO
Magnetically and bias current tunable transient photovoltaic (TPV) responses have been investigated in a manganite-based heterojunction composed of a La2/3Ca1/3MnO3 film and an n-type Si substrate at ambient temperature. Under irradiation of 248 nm pulsed laser with 20 ns duration the TPV peak values can be modulated in a range of -125 to 138 mV when the applied magnetic field perpendicular to the interface changes from -6.4 to + 6.4 kOe, and the relative variations (TPV(H) - TPV(0))/TPV(0) reach up to about 1000%. In addition, TPV responses can be also affected by bias current, and the photoresponse peaks change from positive to negative with the currents from -350 to 350 µA. These results indicate that the manganite-based heterojunction can be used for magnetically and electrically tunable ultraviolet photodetectors.
RESUMO
Nickel oxide (NiO) nanotubes were synthesized via a thermal oxidation process from Ni nanowires. The effects of oxidation temperature on the morphology, microstructures, and composition of nanowires were investigated using scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The results show that the Ni nanowires convert initially to Ni/NiO core-shell nanowires with increasing annealing temperatures, and then to the nanotubes at the critical transition temperature of about 425 °C. Our findings provide useful information for the preparation of NiO nanotubes to meet the required applications.
RESUMO
A facile and high-yield route, dropping method, has been used to synthesize Ni nanowires (NWs) with a high aspect ratio. Compared to the conventional chemical reduction method, the diameter of Ni NWs prepared by the dropping method distinctively decreased and the surface roughness was improved. After optimizing the process parameters such as the Ni ion concentration and volume of the dropped NiCl2·6H2O solution, the diameter and aspect ratio of the NWs are 70 nm and ~600, respectively. The possible synthesized process of the dropping method was discussed. This work presents a preferred approach to fabricate high-quality one-dimensional magnetic materials which have potential applications in electrochemical devices, magnetic sensors, and catalytic agents.
RESUMO
A rapid technique is necessary to quantitatively detect the density of nanowire (NW) and nanotube arrays in one-dimensional devices which have been identified as useful building blocks for nanoelectronics, optoelectronics, biomedical devices, etc. Terahertz (THz) time-domain spectroscopy was employed in this research to detect the density of aligned Ni NW arrays. The transmitted amplitude of THz peaks and optical thickness of NW arrays was found to be the effective parameters to analyze the density change of NW arrays. Owing to the low multiple scattering and high order of Ni NW arrays, a linear relationship was observed for the transmitted amplitude and optical thickness regarding NW density, respectively. Therefore, THz technique may be used as a promising tool to characterize the density of one-dimensional structures in the large-scale integrated nanodevice fabrication.