RESUMO
To compare the structure of microbial community in the oily wastewater treatment plants (OWWTPs) located in China, and to discern the impacts of environment variables on the variance of microbial community, activated sludge samples from six typical OWWTPs were taken and the structure of microbial community of these six samples were analyzed via Illumina high-throughput sequencing. 18 core genera including Comamonas, Bacillus, Pseudomonas, Thauera, Paenibacillus, etc. were shared by all OWWTPs. Canonical correspondence analysis (CCA) suggested that temperature, oil concentration, DO and pH exhibited significant impacts in shaping the structure of microbial community. Variance partitioning analyses (VPA) illuminated that the most variation in microbial community was contributed to geographic location, explaining 36.4% of the total variations obtained, followed by wastewater characteristics (18.7%) and operational parameters (8.6%). This work offered insights into the structure of microbial community in OWWTPs at different geographic locations and illustrated the correlations between environment variables and microbial community in OWWTPs.
Assuntos
Bactérias , Microbiota , Águas Residuárias , China , EsgotosRESUMO
In this study, spent bleaching earth (SBE) and pyrolyzed SBE (SBE@C) were tested for their capacity to remove tetracycline hydrochloride (TCH) from aqueous solution. The maximum adsorption capacity obtained by the Langmuir model is 0.114 mmol/g for SBE@C and 0.087 mmol/g for SBE. The deleterious effects of coexisting cations were ranked in a decline: Al3+ > Mg2+ > Na+. The results of various characterization methods show that the adsorption mechanisms mainly included π-π interactions, hydrogen bonding, electrostatic interactions, and changes in physical and chemical properties. After 3 repeated cycles of pyrolysis, the adsorption capacity of SBE@C remained at 85.4%, with SBE@C potentially recycled 21 times before complete loss of adsorption capacity. Furthermore, the problem of secondary pollution caused by SBE and residual oil is resolved by the use of SBE@C. All results indicate that SBE@C is a likely candidate for the treatment of TCH wastewater in the coming practical applications.
RESUMO
Hydrogen autotrophic reduction of perchlorate have advantages of high removal efficiency and harmless to drinking water. But so far the reported information about the microbial community structure was comparatively limited, changes in the biodiversity and the dominant bacteria during acclimation process required detailed study. In this study, perchlorate-reducing hydrogen autotrophic bacteria were acclimated by hydrogen aeration from activated sludge. For the first time, high-throughput sequencing was applied to analyze changes in biodiversity and the dominant bacteria during acclimation process. The Michaelis-Menten model described the perchlorate reduction kinetics well. Model parameters q(max) and K(s) were 2.521-3.245 (mg ClO4(-)/gVSS h) and 5.44-8.23 (mg/l), respectively. Microbial perchlorate reduction occurred across at pH range 5.0-11.0; removal was highest at pH 9.0. The enriched mixed bacteria could use perchlorate, nitrate and sulfate as electron accepter, and the sequence of preference was: NO3(-) > ClO4(-) > SO4(2-). Compared to the feed culture, biodiversity decreased greatly during acclimation process, the microbial community structure gradually stabilized after 9 acclimation cycles. The Thauera genus related to Rhodocyclales was the dominated perchlorate reducing bacteria (PRB) in the mixed culture.
Assuntos
Processos Autotróficos , Bactérias/genética , Bactérias/metabolismo , Hidrogênio/metabolismo , Percloratos/metabolismo , Biodegradação Ambiental , Biodiversidade , Água Potável , Sequenciamento de Nucleotídeos em Larga Escala , Concentração de Íons de Hidrogênio , Cinética , Modelos Estatísticos , Oxirredução , Esgotos , Thauera/genética , Thauera/metabolismo , Microbiologia da ÁguaRESUMO
TiO2 nanotube (TiNT) electrodes anodized in fluorinated organic solutions were successfully prepared on Ti sheets. Field-emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD) were performed to characterize the TiNT electrodes. The linear voltammetry results under irradiation showed that the TiNT electrode annealed at 450°C presented the highest photoelectrochemical activity. By combining photocatalytic with electrochemical process, a significantly synergetic effect on ammonia degradation was observed with Na2SO4 as supporting electrolyte at pH10.7. Furthermore, the photoelectrocatalytic efficiency on the ammonia degradation was greatly enhanced in presence of chloride ions without the limitation of pH. The degradation rate was improved by 14.8 times reaching 4.98×10-2min-1 at pH10.7 and a faster degradation rate of 6.34×10-2min-1 was obtained at pH3.01. The in situ photoelectrocatalytic generated active chlorine was proposed to be responsible for the improved efficiency. On the other hand, an enhanced degradation of ammonia using TiNT electrode fabricated in fluorinated organic solution was also confirmed compared to TiNT electrode anodized in fluorinated water solution and TiO2 film electrode fabricated by sol-gel method. Finally, the effect of chloride concentration was also discussed.
Assuntos
Cloro/química , Eletrodos , Modelos Químicos , Nanotubos/química , Processos Fotoquímicos , Titânio/química , Amônia , Técnicas Eletroquímicas , Concentração de Íons de Hidrogênio , Microscopia Eletrônica de VarreduraRESUMO
The chemical industry is a major source of various pollution accidents. Improving the management level of risk sources for pollution accidents has become an urgent demand for most industrialized countries. In pollution accidents, the released chemicals harm the receptors to some extent depending on their sensitivity or susceptibility. Therefore, identifying the potential risk sources from such a large number of chemical enterprises has become pressingly urgent. Based on the simulation of the whole accident process, a novel and expandable identification method for risk sources causing water pollution accidents is presented. The newly developed approach, by analyzing and stimulating the whole process of a pollution accident between sources and receptors, can be applied to identify risk sources, especially on the nationwide scale. Three major types of losses, such as social, economic and ecological losses, were normalized, analyzed and used for overall consequence modeling. A specific case study area, located in a chemical industry park (CIP) along the Yangtze River in Jiangsu Province, China, was selected to test the potential of the identification method. The results showed that there were four risk sources for pollution accidents in this CIP. Aniline leakage in the HS Chemical Plant would lead to the most serious impact on the surrounding water environment. This potential accident would severely damage the ecosystem up to 3.8 km downstream of Yangtze River, and lead to pollution over a distance stretching to 73.7 km downstream. The proposed method is easily extended to the nationwide identification of potential risk sources.
Assuntos
Vazamento de Resíduos Químicos , Modelos Teóricos , Poluição da Água , China , Indústrias , Medição de RiscoRESUMO
Calcium alginate (CA) hydrogel spheres were widely used as adsorbents to remove organics, but their adsorption capacities and reusability to some antibiotics are unsatisfactory. In this study, calcium alginate/chitosan (CA/CTS) hydrogel spheres were prepared as precursors. Acid-washed CA/CTS (CA/CTS-M) hydrogel spheres (310.6 mg/g) behaved much better adsorption capacity of norfloxacin (NOR) than CA (69.5 mg/g) and CA/CTS (87.7 mg/g) hydrogel spheres. Astonishingly, after being reused for 15 cycles, CA/CTS-M has no loss of NOR adsorption capacity. In the original idea, acid wash was expected to remove the chitosan in CA/CTS hydrogel spheres for obtaining a larger specific surface area. Both scanning electron microscopy and Brunauer-Emmett-Teller test showed that acid wash can remove CTS from CA/CTS hydrogel spheres to increase the specific surface area. However, part of the chitosan remained in CA/CTS-M, having a role to enhance the structural stability of the material, because the acid-washed CA (about 2 mm) has a significantly smaller diameter than CA/CTS-M (about 3 mm). According to the influence of pH and density functional theory calculations, electrostatic attraction is the key driving force of NOR adsorption. Importantly, acid wash led to more negative-charged surface characterized by Zeta potential, which is the main reason of the significantly enhanced adsorption capacity of CA/CTS-M in removal of NOR. In short, CA/CTS-M hydrogel spheres are environment friendly and highly stable adsorbents with high adsorption capacity in the removal of NOR.
Assuntos
Quitosana , Poluentes Químicos da Água , Norfloxacino , Hidrogéis , Adsorção , Alginatos , Concentração de Íons de Hidrogênio , CinéticaRESUMO
Antimony (Sb), a toxic metalloid, has serious negative effects on human health and its pollution has become a global environmental problem. Bio-reduction of Sb(V) is an effective Sb-removal approach. This work, for the first time, demonstrates the feasibility of autotrophic Sb(V) bio-reduction and removal coupled to anaerobic oxidation of elemental sulfur (S0). In the S0-based biological system, Sb(V) was reduced to Sb(III) via autotrophic bacteria by using S0 as electron donor. Meanwhile, S0 disproportionation reaction occurred under anaerobic condition, generating sulfide and SO42- in the bio-systems. Subsequently, Sb(III) reacted with sulfide and formed Sb(III)-S precipitate, achieving an effective total Sb removal. The precipitate was identified as Sb2S3 by SEM-EDS, XPS, XRD and Raman spectrum analyses. In addition, it was found that co-existing nitrate inhibited the Sb removal, as nitrate is the favored electron acceptor over Sb(V). In contrast, the bio-reduction of co-existing SO42- enhanced sulfide generation, followed by promoting Sb(V) reduction and precipitation. Illumina high-throughput sequencing analysis revealed that Metallibacterium, Citrobacter and Thiobacillus might be responsible for Sb(V) reduction and S0 disproportionation. This study provides a promising approach for the remediation of Sb(V)-contaminated water.
Assuntos
Antimônio , Nitratos , Humanos , Oxirredução , Sulfetos , Enxofre , ÁguaRESUMO
Hydrogen autotrophic bioreduction of antimonate (Sb(V)) to antimonite (Sb(III)) is an alternative approach for removing antimony (Sb) from water. This study investigated Sb(V) reduction kinetics and the effects of various parameters on the Sb(V) removal performance in a hydrogen autotrophic reaction system (HARS). Sb(V) reduction in the HARS was well fitted to the Michaelis-Menten model, showing a positive correlation between the reaction rate and biomass. The maximum specific substrate removal rates were 0.29-4.86 and 6.82-15.87 mg Sb(V)/(g·VSS·h) at initial Sb(V) concentrations of 500 µg/L and 10 mg/L, respectively. Coexisting nitrate significantly inhibited Sb(V) reduction, and the inhibition intensified with increasing nitrate concentration. However, coexisting sulfate had a positive effect on Sb(V) reduction, and the sulfate effectively enhanced total antimony (TSb) removal performance by generating sulfide from sulfate reduction. Illumina high-throughput sequencing technology was used to determine the changes in microbial community structure during different periods in the HARS, revealing the effects of co-existing ions on the dominant Sb(V) reducing bacteria. In the HARS, Longilinea and Terrimonas were the dominant genera in the presence of nitrate, and Longilinea was the dominant genus in the presence of sulfate, at initial Sb(V) concentration of 500 µg/L. When the concentration of Sb(V) was 10 mg/L, Longilinea and Thauera were the dominant genus in the HARS for treating water co-polluted with nitrate and sulfate, respectively. These results provide a theoretical basis of the application of HARS for the bio-remediation of Sb(V) contaminated water.
Assuntos
Antimônio , Microbiota , Antimônio/química , Antimônio/farmacologia , Hidrogênio , Nitratos , Sulfatos , Sulfetos , ÁguaRESUMO
In this study, the novel mesoporous carbonized material (HSBE/C) was prepared from clay/carbon composite (SBE/C) treated with hydrofluoric acid (HF) for the first time, and was employed to efficiently adsorb bisphenol A (BPA) in water. Specifically, SBE/C was derived from the pyrolysis of spent bleaching earth (SBE), an industrial waste. HF removed SiO2 from SBE/C and increased the specific surface area of HSBE/C (from 100.21 to 183.56 m2/g), greatly providing more adsorption sites for enhanced BPA adsorption capacity. The Langmuir monolayer maximum adsorption capacity of HSBE/C (103.32 mg/g) was much higher than the commercial activated carbon (AC) (42.53 mg/g). The adsorption process by HSBE/C followed well with the Freundlich isotherm model and the pseudo-second-order kinetic model and also was endothermic (ΔH0 > 0) and spontaneous (ΔG0 < 0). Based on the systematic characterization and factor experiment (temperature, dosage, initial pH, co-existing ions), BPA adsorption mechanism by HSBE/C likely included the hydrogen bonding, electrostatic interaction, and hydrophobic interaction. Moreover, there was no secondary pollution during the total adsorption process. Extraordinary, HSBE/C manifested stability by NaOH desorption regeneration. This study provides a new sight for application of waste-based materials as the promising adsorbents in the treatment of endocrine disruptors.
Assuntos
Dióxido de Silício , Poluentes Químicos da Água , Adsorção , Compostos Benzidrílicos , Concentração de Íons de Hidrogênio , Cinética , Fenóis , Água , Poluentes Químicos da Água/análiseRESUMO
The environmentally friendly clay/carbon composite (SBE/C) was prepared by one-step pyrolysis under N2 atmosphere at 700°C of spent bleaching earth (SBE) from the industrial waste of the refined oil industry. SBE/C was tested to remove anionic dye Eosin Y from aqueous water. The results revealed that SBE/C had larger specific surface area than SBE, and the equilibrium adsorption capacity of SBE/C (11.15 mg/g) was about 3 times than that of SBE (4.04 mg/g). The adsorption process was found to be exothermic and spontaneous. The adsorption capacity of SBE/C was independent on pH (5-12), and exhibits satisfactorily recyclable performance. Combined with characterization analysis, the adsorption mechanism likely includes electrostatic interaction, hydrogen bonding, hydrophobic interaction, halogen bonding, and π-π interaction. Overall, this exploration of SBE/C might open a window to the design of an efficient and low-cost adsorbent for Eosin Y dye elimination from wastewater. PRACTITIONER POINTS: The resource utilization of industrial waste SBE was achieved. SBE/C was synthesized and tested to adsorb Eosin Y for the first time. SBE/C had characteristics with porous structure and large surface area. pH had little effect on adsorption capacity of SBE/C for Eosin Y. SBE/C exhibited potential for dye elimination from wastewater.
Assuntos
Carbono , Poluentes Químicos da Água , Adsorção , Argila , Amarelo de Eosina-(YS) , Concentração de Íons de Hidrogênio , Cinética , ÁguaRESUMO
A novel Fe3O4-graphene-biochar composite (GBC-Fe3O4) was prepared to enhance the adsorption capacity and recollection efficiency of graphene-biochar composites (GBCs). The adsorption characteristics were tested to remove crystal violet (CV), which is a refractory compound in industrial wastewater. Structural and morphological analysis exhibited that a larger surface area, greater thermal stability, and more functional groups were present after Fe3O4 nanoparticles coated the GBC surface. This improved the CV adsorption versus uncoated GBC. The introduction of G and Fe3O4 nanoparticles collectively reduced the zeta potentials of GBC-Fe3O4 to -38.1 ± 1.1 mV versus -24.3 ± 2.2 mV for GBC and -20.7 ± 1.2 mV for BC. The maximum Qmax values were obtained 436.68 mg/g at 40 °C. Fourier transform infrared analysis suggested that the interactions of functional groups, such as aromatic C = C and C = O, -OH, C-C, and π-π played an important role in CV adsorption. The thermodynamic analysis of Langmuir and Freundlich isotherms indicated that the adsorption improved as a spontaneous endothermic process. The saturation magnetization of GBC-Fe3O4 reached 61.48 emu/g, allowing efficient recollection of the material with a magnet. The CV adsorbability of the re-collected GBC-Fe3O4 was 157.31 mg/g, which was slightly lower than freshly prepared GBC-Fe3O4 (199 mg/g). These findings demonstrated that GBC-Fe3O4 was an efficient and reusable multifunctional biochar.
Assuntos
Carvão Vegetal , Adsorção , Compostos Férricos , Violeta Genciana , Grafite , Cinética , Poluentes Químicos da ÁguaRESUMO
An electrochemical process combined with ultraviolet light irradiation (UPE) using nonphotoactive dimensionally stable anodes (DSAs) like RuO2/Ti and IrO2/Ti in the presence of chlorides was investigated for ammonia degradation. In this process, the in situ electrogenerated active chlorine and in situ photogenerated chlorine radicals were responsible for the high efficiency of ammonia degradation. More than 97% of ammonia was converted to nitrogen and a significantly synergistic effect was confirmed. Compared with the single electrochemical (E) and photochemical (P) process, the degradation rates of ammonia and the average current efficiencies (ACEs) of the UPE process increased by 1.5 and 1.7 times using RuO2/Ti and IrO2/Ti electrodes, respectively. On the basis of the linear voltammograms, Electrochemical Impedance Spectra (EIS), UV-vis spectra, Electron Spin Resonance (ESR) analysis and a series of experiments designed, the synergistic mechanism was investigated. In addition, this unique process succeeded in transferring the reaction from the electrode surface to the bulk of the solution compared with the conventional photoelectrocatalytic (PEC) process. The loss of chloride decreased from 21.0% to 7.2% and the recycle of chloride was accelerated in the UPE process. Finally the effects of initial pH, current density and ammonia-nitrogen concentration were discussed. Results indicated that pH and ammonia concentration exerted little influences on the degradation rates and current density was the "rate-determining" factor.
Assuntos
Amônia/química , Cloretos/química , Eletroquímica/métodos , Raios Ultravioleta , Cloro/química , Eletricidade , Espectroscopia de Ressonância de Spin Eletrônica , Concentração de Íons de Hidrogênio , Laboratórios , Nitrogênio/química , Soluções , Sulfatos/químicaRESUMO
A combined heterotrophic-sulfur-autotrophic system (CHSAS) was established to simultaneously reduce perchlorate and nitrate in water. In this system, the OH- produced by the acetate heterotrophic part (H-part) could be neutralized with the H+ produced by the sulfur autotrophic part (S-part); thus, the pH of the final effluent could keep neutral. In addition, the S-part could further reduce the pollutants and residual carbon from the H-part to achieve a high performance. For 19.62⯱â¯0.30â¯mg/L ClO4- and 21.56⯱â¯0.83â¯mg/L NO3--N in the influent, the operating parameters were optimal at a hydraulic retention time (HRT) of 1.0â¯h and an acetate concentration of 70â¯mg/L. The removal efficiency of ClO4- and NO3- reached 95.43% and 99.23%, without secondary pollution caused by residual organic carbon. It was also revealed that sulfur (S0) disproportionation can be inhibited by shortening the HRT and reducing the acetate dosage. The dominant heterotrophic and autotrophic bacteria were Thauera and Ferritrophicum, respectively, while Chlorobaculum was related to S0 disproportionation.
Assuntos
Chlorobi , Microbiota , Processos Autotróficos , Reatores Biológicos , Desnitrificação , Concentração de Íons de Hidrogênio , Nitratos , Percloratos , EnxofreRESUMO
A novel Moving-Bed Biofilm Reactor (MBBR), based on proton-exchange membrane electrolysis, was developed and tested for perchlorate transformation. The bacteria growing on the carrier in the cathode chamber could use in situ-generated hydrogen to reduce perchlorate to chloride via electrolysis; the resulting chloride ions and chloride ions in raw water were then oxidized into chlorine by anode reaction to disinfect the final effluent and improve water quality. For a ClO4- concentration of 10.00⯱â¯0.08â¯mg/L in the influent, at hydraulic retention times (HRTs) of 4.0, 2.0, and 1.5â¯h, the optimal applied currents (OACs) were 130, 240, and 270â¯mA, with a corresponding removal efficiencies of 99.90⯱â¯0.21, 96.70⯱â¯0.36, and 78.50⯱â¯0.24%, respectively. Active chlorine concentration was in the range of 0.063-0.096â¯mg/L, contributing to simultaneous electro-disinfection. Along the water flow direction, OH- generated by the cathode could be neutralized in the anode chamber; thus, the final effluent pH was kept a balance with the influent pH. Proteobacteria, Bacteroidetes, and Firmicutes were the dominant bacteria in the MBBR. The maximum value of current efficiency (13.32⯱â¯0.69%) was obtained at 100â¯mA and an HRT of 4.0â¯h, which was in accordance with the abundance of Thauera.
Assuntos
Biofilmes , Reatores Biológicos , Desinfecção/métodos , Técnicas Eletroquímicas/métodos , Percloratos/química , Prótons , Desinfecção/instrumentação , Técnicas Eletroquímicas/instrumentação , Eletrólise , Membranas Artificiais , OxirreduçãoRESUMO
This study investigates the sulfur (S) disproportionation tendencies in a sulfur packed bed reactor for perchlorate bio-autotrophic reduction at different temperatures. The reactor was operated with over 99% efficiency for 21.00⯱â¯1.40â¯mgâ¯L-1 perchlorate removal when the hydraulic retention time (HRT) ranged from 12.00â¯h to 0.75â¯hâ¯at 27⯱â¯2⯰C. When HRT was controlled at 1.00â¯h, the perchlorate removal efficiency was only 8⯱â¯1% as the temperature dropped to 6⯱â¯1⯰C. The half-order model fit both perchlorate removal and S disproportionation reaction well. Compared with S disproportionation, the decrease of temperature had a greater influence on perchlorate reduction. As the temperature dropped from 27⯱â¯2⯰C to 6⯱â¯1⯰C, the 1/2K1/2v,R for perchlorate reduction decreased from 7.37 mg1/2â¯L-1/2 h-1 to 0.19 mg1/2â¯L-1/2 h-1. Meanwhile, the 1/2K1/2v,S for S disproportionation decreased from 3.04 mg1/2â¯L-1/2 h-1 to 1.96 mg1/2â¯L-1/2 h-1. The reaction activation energy of perchlorate reduction and S disproportionation was 120.28â¯kJâ¯mol-1 and 13.44â¯kJâ¯mol-1, respectively. The S disproportionation reaction proceeded remarkably at the beginning of the reduction, a longer HRT and higher temperature promoted S disproportionation, resulting in excessive sulfate generation and alkalinity consumption. Besides, the spatial distribution of the microbial communities and the dominant bacteria function under different HRTs was analyzed using high-throughput sequencing.
Assuntos
Processos Autotróficos , Reatores Biológicos/microbiologia , Microbiota , Percloratos/química , Enxofre/química , Purificação da Água/métodos , TemperaturaRESUMO
In this study, cow dung biochar (CDB) and ferric chloride-modified CDB (Fe@CDB) were synthesized to remove low concentration perchlorate from water. The pseudo-second-order kinetics model was used and satisfactorily described perchlorate removal onto CDB and Fe@CDB. The Langmuir model fit the experimental isotherm data better than the Freundlich model. The maximum adsorption capacity obtained using the Langmuir model was 1787⯵g/g for Fe@CDB and 304⯵g/g for CDB. The detrimental effects of coexisting anions decreased as: NO3-â¯>â¯SO42-â¯>â¯Cl-. FeCl3 modification enhanced ion exchange, and this was the main mechanism rather than electrostatic interactions. Also, after modification, the surface area, pore volume, and pore size increased and promoted adsorption. The surface hydrophilicity increased and so did the amounts of the surface oxygenated functional groups OH and COOH, which were responsible for perchlorate adsorption. The materials were further characterized using Brunner-Emmet-Teller (BET) measurements, Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES), Scanning Electron Microscopy (SEM), Elemental analysis, X-ray photoelectron spectroscopy (XPS), Boehm titration, Zeta potential and Fourier transform infrared spectroscopy (FTIR).
RESUMO
This study investigated the simultaneous removal of perchlorate and nitrate from aqueous solution in an up-flow sulfur autotrophic reduction reactor. A nitrate and perchlorate containing pollution solution was treated with a remarkable removal efficiency greater than 97%. The concentration of nitrate was 22.03 ± 1.07 mg-N/L coexisting with perchlorate either 21.87 ± 1.03 mg/L or 471.7 ± 50.3 µg/L, in this case the reactor could be operated at a hydraulic retention time (HRT) ranging from 12.00 h to 0.75 h. Half-order kinetics model fit the experimental data well; this indicates that diffusion in the biofilm was the limiting step. Perchlorate reduction required a longer reaction time than the coexisting nitrate, regardless of the perchlorate concentration. Sulfur (S) disproportionation was inhibited when nitrate was not completely removed; whereas it was accelerated when perchlorate decreased to low concentrations. This process therefore generated excessive sulfate and consumed much more alkalinity. High-throughput sequencing method was used to analyze bacterial community spatial distribution in the reactor under different operational conditions. The reduction of the two contaminants was accompanied by a decrease in biodiversity. The results indicated that Sulfuricella, Sulfuritalea Thiobacillus, and Sulfurimonas are effective DB (denitrification bacteria)/PRB (perchlorate reduction bacteria). The Chlorobaculum genus was the dominant bacteria associated with S disproportionation.
Assuntos
Percloratos , Enxofre/química , Reatores Biológicos/microbiologia , Chlorobi , Cinética , Nitratos/química , Purificação da ÁguaRESUMO
Berberine is a broad-spectrum antibiotic extensively used in personal medication. The production of berberine results in the generation of wastewater containing concentrated residual berberine. However, few related studies up to date focus on berberine removal from wastewaters. In this study, a lab-scale upflow anaerobic sludge blanket (UASB)-membrane bioreactor (MBR) process was developed for berberine removal from synthetic wastewater. The performance of the UASB-MBR system on berberine, COD and NH(4)(+)--N removal was investigated at different berberine loadings. And the effects of berberine on bacterial communities were evaluated using polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE). Results showed that, as the increase of berberine loadings, UASB performance was affected remarkably, whereas, efficient and stable performance of MBR ensured the overall removal rates of berberine, COD and NH(4)(+)--N consistently reached up to 99%, 98% and 98%, respectively. Significant shifts of bacterial community structures were detected in both UASB and MBR, especially in the initial operations. Along with the increase of berberine loadings, high antibiotic resisting species and some functional species, i.e. Acinetobacter sp., Clostridium sp., Propionibacterium sp., and Sphingomonas sp. in UASB, as well as Sphingomonas sp., Methylocystis sp., Hydrogenophaga sp. and Flavobacterium sp. in MBR were enriched in succession.
Assuntos
Anti-Infecciosos/metabolismo , Berberina/metabolismo , Reatores Biológicos , Consórcios Microbianos/efeitos dos fármacos , Poluentes Químicos da Água/metabolismo , Anti-Infecciosos/administração & dosagem , Anti-Infecciosos/toxicidade , Berberina/administração & dosagem , Berberina/toxicidade , Análise por Conglomerados , Eletroforese em Gel de Gradiente Desnaturante , Estudos de Viabilidade , Filogenia , Águas Residuárias/microbiologia , Poluentes Químicos da Água/administração & dosagem , Poluentes Químicos da Água/toxicidade , Purificação da ÁguaRESUMO
Biodegradation of berberine antibiotic was investigated in upflow anaerobic sludge blanket (UASB)-membrane bioreactor (MBR) process. After 118days of operation, 99.0%, 98.0% and 98.0% overall removals of berberine, COD and NH4(+)-N were achieved, respectively. The detailed composition of the established bacterial communities was studied by using 16S rDNA clone library. Totally, 400 clones were retrieved and grouped into 186 operational taxonomic units (OTUs). UASB was dominated by Firmicutes and Bacteroidetes, while Proteobacteria, especially Alpha- and Beta-proteobacteria were prevalent in the MBRs. Clostridium, Eubacterium and Synergistes in the UASB, as well as Hydrogenophaga, Azoarcus, Sphingomonas, Stenotrophomonas, Shinella and Alcaligenes in the MBRs were identified as potential functional species in biodegradation of berberine and/or its metabolites. The bacterial community compositions in two MBRs were significantly discrepant. However, the identical functions of the functional species ensured the comparable pollutant removal performances in two bioreactors.
Assuntos
Bactérias/metabolismo , Berberina/isolamento & purificação , Reatores Biológicos , Membranas Artificiais , Esgotos , Águas Residuárias , Poluentes Químicos da Água/isolamento & purificação , Anaerobiose , Bactérias/classificação , Bactérias/genética , Berberina/metabolismo , Filogenia , Reação em Cadeia da Polimerase , Poluentes Químicos da Água/metabolismoRESUMO
Fosfomycin pharmaceutical wastewater contains highly concentrated and refractory antibiotic organic phosphorus (OP) compounds. Wet air oxidation (WAO)-phosphate crystallization process was developed and applied to fosfomycin pharmaceutical wastewater pretreatment and phosphorus recovery. Firstly, WAO was used to transform concentrated and refractory OP substances into inorganic phosphate (IP). At 200°C, 1.0MPa and pH 11.2, 99% total OP (TOP) was transformed into IP and 58% COD was reduced. Subsequently, the WAO effluent was subjected to phosphate crystallization process for phosphorus recovery. At Ca/P molar ratio 2.0:1.0 or Mg/N/P molar ratio 1.1:1.0:1.0, 99.9% phosphate removal and recovery were obtained and the recovered products were proven to be hydroxyapatite and struvite, respectively. After WAO-phosphate crystallization, the BOD/COD ratio of the wastewater increased from 0 to more than 0.5, which was suitable for biological treatment. The WAO-phosphate crystallization process was proven to be an effective method for phosphorus recovery and for fosfomycin pharmaceutical wastewater pretreatment.