RESUMO
Surfactant enhanced elution is an effective method for removing hydrophobic organic pollutants from soils. The key to the development of leaching technology is selective removal of targeted pollutants in soil washing effluent and recycling of surfactant solutions. In this study, a molecular imprinting technique was applied to selectively sorb polybrominated diphenyl ethers (PBDEs) in soil washing effluent. The novel molecular imprinted polymers (MIPs) using different template molecules were synthesized by precipitation polymerization. Adsorption behaviors and mechanisms of MIPs were studied through experiments and theoretical calculations. The results show that 4-bromo-4'-hydroxybiphenyl and toluene can be effective imprinting molecule for MIPs synthesis. The maximal adsorption capacity of selected dummy molecular imprinted polymer (D1-MIP) was 1032.36 µmol/g, and that of part molecular imprinted polymer (P-MIP) was 981.13 µmol/g. Their imprinting factors in 5 PBDEs adsorption ranged from 2.13 to 5.88, the recovery percentage of Triton X-100 can reach 99.09%, confirming the feasibility of reusing surfactant. Various PBDEs could be removed by MIPs, and Quantitative Structure Property Relationship analysis revealed that PBDEs' molecular volume, planarity, polarity, and hydrophobicity have major influences on their adsorption performance. DFT calculation revealed that Van der Waals force and hydrogen bonding played important roles during selective adsorption. These results can provide effective theoretical guidance for surfactant enhanced soil elution in practical engineering applications.
Assuntos
Poluentes Ambientais , Impressão Molecular , Éteres Difenil Halogenados , Impressão Molecular/métodos , Polímeros/química , Tensoativos , AdsorçãoRESUMO
Manganese dioxide (MnO2) nanomaterials have shown excellent performance in catalytic degradation and other fields because of their low density and great specific surface area, as well as their tunable chemical characteristics. However, the methods used to synthesize MnO2 nanomaterials greatly affect their structures and properties. Therefore, the present work systematically illustrates common synthetic routes and their advantages and disadvantages, as well as examining research progress relating to electrochemical applications. In contrast to previous reviews, this review summarizes approaches for preparing MnO2 nanoparticles and describes their respective merits, demerits, and limitations. The aim is to help readers better select appropriate preparation methods for MnO2 nanomaterials and translate research results into practical applications. Finally, we also point out that despite the significant progress that has been made in the development of MnO2 nanomaterials for electrochemical applications, the related research remains in the early stages, and the focus of future research should be placed on the development of green synthesis methods, as well as the composition and modification of MnO2 nanoparticles with other materials.
RESUMO
Soil washing techniques can effectively remove soil polybrominated diphenyl ethers (PBDEs), but further removal of PBDEs from washing effluent is disrupted by environmental factors and coexisting organic matter. Hence, this work prepared novel magnetic molecularly imprinted polymers (MMIPs) to selectively remove PBDEs in soil washing effluent and recycling surfactants, with Fe3O4 nanoparticles as the magnetic core, methacrylic acid (MAA) as the functional monomer, and ethylene glycol dimethacrylate (EGDMA) as the cross-linker. Later, the prepared MMIPs were applied to adsorb 4,4'-dibromodiphenyl ether (BDE-15) in Triton X-100 soil-washing effluent and characterized by scanning electron microscopy (SEM), infrared spectrometry (FT-IR), nitrogen adsorption and desorption experiments. According to our observations, BDE-15 equilibrium adsorptions on dummy-template magnetic molecularly imprinted adsorbent (D-MMIP, 4-bromo-4'-hydroxyl biphenyl as template) and part-template magnetic molecularly imprinted adsorbent (P-MMIP, toluene as template) were reached within 40 min, and their equilibrium adsorption capacities were 164.54 µmol/g and 145.55 µmol/g, respectively, with imprinted factor α > 2.03, selectivity factor ß > 2.14, and selectivity S > 18.05. MMIPs exhibited good adaptability to pH, temperature, and cosolvent. Our Triton X-100 recovery rate reached as high as 99.9%, and MMIPs maintained a more than 95% adsorption capacity after being recycled five times. Our results offer a novel approach to selectively remove PBDEs in soil-washing effluent, with efficient recovery of surfactants and adsorbents in soil-washing effluent.
Assuntos
Impressão Molecular , Polímeros Molecularmente Impressos , Éteres Difenil Halogenados , Impressão Molecular/métodos , Polímeros/química , Espectroscopia de Infravermelho com Transformada de Fourier , Octoxinol , Adsorção , Fenômenos MagnéticosRESUMO
Jarosite is an important scavenger for arsenic (As) due to its strong adsorption capacity and ability to co-precipitate metal(loid)s in acid mine drainage (AMD) environments. When subjected to natural organic matter (NOM), metastable jarosite may undergo dissolution and transformation, affecting the mobility behavior of As. Therefore, the present study systematically explored the dissolution and transformation of jarosite, and the consequent redistribution of coprecipitated As(V) under anoxic condition in the presence of a common phenolic acid-gallic acid (GA). The results suggested that As(V) incorporating into the jarosite structure stabilized the mineral and inhibited the dissolution process. Jarosite persisted as the dominant mineral phase at pH 2.5 up to 60 d, though a large amount of structural Fe(III) was reduced by GA. However, at pH 5.5, jarosite mainly transformed to ferrohexahydrite (FeSO4·6H2O) with GA addition, while the principal end-product was goethite in GA-free system. The dissolution process enhanced As(V) mobilization into aqueous and surface-complexed phase at pH 2.5, while co-precipitated fraction of As(V) remained dominant under pH 5.5 condition. Result of XPS indicated that no reduction of As(V) occurred during the interaction between GA and As(V)-bearing jarosite, which would limit the toxicity to the environment. The reductive process involved that GA promoted the dissolution of jarosite via the synergistic effect of ligand and reduction, following by GA and release As(V) competing for active sites on mineral surface. The findings demonstrated that phenolic groups in NOM can exert great influence on the stability of jarosite and partitioning behavior of As(V).
Assuntos
Arsênio/química , Compostos Férricos/química , Ácido Gálico/química , Sulfatos/química , Adsorção , Compostos de Ferro , Minerais , Mineração , OxirreduçãoRESUMO
In recent years, persulfate (PS) has been widely studied as a promising oxidant. In this work, a new K-Fe2O3 catalyst was synthesized via a facile impregnation method. K-Fe2O3 samples were utilized as heterogeneous photocatalysts for the degradation of aquatic organic pollutants (rhodamine, RhB, and ciprofloxacin, CIP). The catalysts showed excellent catalytic activity in the presence of PS under the irradiation of visible light, owing to the generation of SO4Ë- and ·OH active radicals. The degradation ratio and COD removal ratio for RhB were 99.8% and 88.3%. More importantly, the system retained a high degradation activity for RhB within a wide operating pH range of 2.9-10. The results of cycling degradation experiments confirmed that the K-Fe2O3 catalyst was stable and recoverable. Large-scale experiments for treating dye wastewater under irradiation by natural sunlight were carried out, showing that this study can provide a new perspective for the treatment of wastewater.
RESUMO
In this work, a magnetic ion imprinted polymer (MIIP) with specific recognition capability toward cadmium was prepared by a sol-gel method using waste beer yeast, which is a macromolecule biomass, as a functional monomer. The obtained Cd(ii)-MIIP was characterized using scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy and adsorption experiments. Then, a MIIP adsorbent based magnetic solid phase extraction (MSPE)-graphite furnace atomic absorption (GFAA) method was established to analyze the cadmium content in food and environmental samples. The maximum cadmium adsorption capacities by the MIIP and magnetic non-imprinted polymer (MNIP) were 62.74 and 32.38 mg g-1, respectively. The absorption by the MIIP was fitted using a pseudo-second-order kinetic model. The Cd(ii)-MIIP demonstrated superior absorption capability for selective removal cadmium. The recovery rate of the MIIP was 90.7% after four adsorption-desorption cycles. The calculated Cd(ii) detection limit (S/N = 3) was 0.18 µg L-1 with the relative standard deviation (RSD) equal to â¼3.5% for 10 µg L-1 of Cd(ii) standard solution. Our proposed method was successfully used in detecting Cd(ii) in aqueous samples. The results obtained in this work suggest that the Cd(ii)-MIIPs might be promising adsorbents to remove harmful cadmium ions from aqueous samples.
RESUMO
The alkaline phosphatase activities (APA) and phosphorus fractions in activated sludge during wastewater treatment were studied. Our results showed that the phosphorus concentration and fractions in activated sludge were highly correlated with the characteristics of influents. Inorganic phosphorus (IP) and non-apatite inorganic phosphorus (NAIP) were the main phosphorus fractions of sludge. A larger phosphorus concentration was found in activated sludge due to the more readily mobilizable and bio-available forms. The APA in sludge was directly correlated with mixed liquor suspended solids (MLSS) in activated sludge. The APA in the sludge is implicated the depletion of organic phosphorus forms in sludge, whilst also implying its less inhibition of inorganic phosphorus in sludge. The APA and phosphorus fractions in different sludge samples from the same wastewater treatment plant were quite stable. This stability shows their tight interactions in sludge.
Assuntos
Fosfatase Alcalina/química , Fósforo/química , Esgotos/análise , Esgotos/química , Ativação EnzimáticaRESUMO
The influence of metal ions, anions, ortho-phosphate, polyphosphate and organic phosphorus on the activity and kinetics of alkaline phosphatase in aerobic activated sludge taken from a local municipal wastewater treatment plant was investigated. Results suggested that there were three impact models of heavy metals on alkaline phosphatase activity (APA) and most inorganic anions were relatively innocuous at concentrations from 0 to 5.0mM. However, phosphorus especially pyrophosphate had an inhibitory effect on APA, since the residual activity of alkaline phosphatase dramatically decreased to 34.8% of the control at the pyrophosphate concentration of 5.0mM. The inhibition of Cu(2+) on alkaline phosphatase was described satisfactorily by an uncompetitive type at low concentrations, but a mixed of noncompetitive-uncompetitive type at high concentrations. The inhibition of ortho-phosphate was found to be of the competitive type. V(max)/K(m) ratio is a good indicator for the catalytic efficiency of alkaline phosphatases in wastewater.
Assuntos
Aerobiose , Fosfatase Alcalina/metabolismo , Íons , Fosfatos/química , Esgotos , Cinética , Metais Pesados/químicaRESUMO
A series of pot and field experiments and field demonstrations showed that in comparing with the commonly used specific-fertilizers containing same amounts of nutrients, single basal application of rice-specific controlled release fertilizer could increase the use efficiency of N and P by 12.2% - 22.7% and 7.0% - 35.0%, respectively in pot experiment, and the use efficiency of N by 17.1% in field experiment. In 167 field demonstrations successively conducted for 3 years in various rice production areas of Guangdong Province, single basal application of the fertilizer saved the application rate of N and P by 22.1% and 21.8%, respectively, and increased the yield by 8.2%, compared with normal split fertilization.