Anchoring Ni(OH)2-CeOx Heterostructure on FeOOH-Modified Nickel-Mesh for Efficient Alkaline Water-Splitting Performance with Improved Stability under Quasi-Industrial Conditions.

Developing low-cost and industrially viable electrode materials for efficient water-splitting performance and constructing intrinsically active materials with abundant active sites is still challenging. In this study, a self-supported porous network Ni(OH)2-CeOx heterostructure layer on a FeOOH-modified Ni-mesh (NiCe/Fe@NM) electrode is successfully prepared by a facile, scalable two-electrode electrodeposition strategy for overall alkaline water splitting. The optimized NiCe0.05/Fe@NM catalyst reaches a current density of 100 mA cm-2 at an overpotential of 163 and 262 mV for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively, in 1.0 m KOH with excellent stability. Additionally, NiCe0.05/Fe@NM demonstrates exceptional HER performance in alkaline seawater, requiring only 148 mV overpotential at 100 mA cm-2. Under real water splitting conditions, NiCe0.05/Fe@NM requires only 1.701 V to achieve 100 mA cm-2 with robust stability over 1000 h in an alkaline medium. The remarkable water-splitting performance and stability of the NiCe0.05/Fe@NM catalyst result from a synergistic combination of factors, including well-optimized surface and electronic structures facilitated by an optimal Ce ratio, rapid reaction kinetics, a superhydrophilic/superaerophobic interface, and enhanced intrinsic catalytic activity. This study presents a simple two-electrode electrodeposition method for the scalable production of self-supported electrocatalysts, paving the way for their practical application in industrial water-splitting processes.

One Stone, Three-Birds Approach: Ultra-active Ru/N, S-MoO2/CNTs Electrocatalyst for Overall Water Splitting in Wide Electrode Applications (NF, GC, and CC).

The construction of exceptionally multifunctional electrocatalysts is essential for various applications, but it poses significant challenges. A novel electrocatalyst, denoted as Ru/N, S-MoO2/CNTs, was successfully synthesized using a combination of mechano-grinding and hydrothermal/calcination techniques. The Ru/N, S-MoO2/CNTs demonstrates ultrasmall overpotentials of 12 and 163 mV in NF, 51 and 167 mV in GCE, and 54 and 173 mV in CC for HER and OER, respectively, at a current density of 10 mA/cm2 in alkaline medium. To accomplish electrocatalytic OWS, a current density of 10 mA/cm2 can be obtained by using a cell voltage of 1.446 V. Theoretical studies demonstrated that the inclusion of Ru, N, and S triggers a change in the composition of MoO2; produces oxygen vacancies; and forms Ru, N, and S-oxygen-Mo catalytic centers. The combination of Ru, N, and S nanoclusters; Ru, N, and S-oxygen-Mo catalytic centers; and OVs-enriched MoO2 would position it among the top electrocatalysts.

Promoting CO2 Dynamic Activation via Micro-Engineering Technology for Enhancing Electrochemical CO2 Reduction.

Optimizing the coordination structure and microscopic reaction environment of isolated metal sites is promising for boosting catalytic activity for electrocatalytic CO2 reduction reaction (CO2 RR) but is still challenging to achieve. Herein, a newly electrostatic induced self-assembly strategy for encapsulating isolated Ni-C3 N1 moiety into hollow nano-reactor as I-Ni SA/NHCRs is developed, which achieves FECO  of 94.91% at -0.80 V, the CO partial current density of ≈-15.35 mA cm-2 , superior to that with outer Ni-C2 N2 moiety (94.47%, ≈-12.06 mA cm-2 ), or without hollow structure (92.30%, ≈-5.39 mA cm-2 ), and high FECO of ≈98.41% at 100 mA cm-2 in flow cell. COMSOL multiphysics finite-element method and density functional theory (DFT) calculation illustrate that the excellent activity for I-Ni SA/NHCRs should be attributed to the structure-enhanced kinetics process caused by its hollow nano-reactor structure and unique Ni-C3 N1 moiety, which can enrich electron on Ni sites and positively shift d-band center to the Fermi level to accelerate the adsorption and activation of CO2 molecule and *COOH formation. Meanwhile, this strategy also successfully steers the design of encapsulating isolated iron and cobalt sites into nano-reactor, while I-Ni SA/NHCRs-based zinc-CO2 battery assembled with a peak power density of 2.54 mW cm--2 is achieved.

Synergistically Coupled Ni/CeOx@C Electrocatalysts for the Hydrogen Evolution Reaction: Remarkable Performance to Pt/C at High Current Density.

Incredibly active electrocatalysts comprising earth-abundant materials that operate as effectively as noble metal catalysts are essential for the sustainable generation of hydrogen through water splitting. However, the vast majority of active catalysts are produced via complicated synthetic processes, making scale-up considerably tricky. In this work, a facile strategy is developed to synthesize superhydrophilic Ni/CeOx nanoparticles (NPs) integrated into porous carbon (Ni/CeOx@C) by a simple two-step synthesis strategy as efficient hydrogen evolution reaction (HER) electrocatalysts in 1.0 M KOH. Benefiting from the electron transport induced by the heterogeneous interface between Ni and CeOx NPs and the superhydrophilic structure of the catalyst, the resultant Ni2Ce1@C/500 catalysts exhibit a low overpotential of 26 and 184 mV at a current density of 10 and 300 mA cm-2, respectively, for HER with a small Tafel slope of 62.03 mV dec-1 and robust durability over 300 h, and its overpotential at a high current density is much better than the benchmark commercial Pt/C. Results revealed that the electronic rearrangement between Ni and CeOx integrated into porous carbon could effectively regulate the local conductivity and charge density. In addition, the oxygen vacancies and Ni/CeOx heterointerface promote water adsorption and hydrogen intermediate dissociation into H2 molecules, which ultimately accelerate the HER reaction kinetics. Notably, the electrochemical results demonstrate that structural optimization by regulating synthesis temperature and metal concentration could improve the surface features contributing to high electrical conductivity and increase the number of electrochemically active sites on the Ni/CeOx@C heterointerface, high crystal purity, and better electrical conductivity, resulting in its exceptional electrocatalytic performance toward the HER. These results indicated that the Ni/CeOx@C electrocatalyst has the potential for practical water-splitting applications because of its controlled production strategy and outstanding Pt-like HER performance.

Size-controllable synthesis of zinc ferrite/reduced graphene oxide aerogels: efficient electrochemical sensing of p-nitrophenol.

In this study, a nonaqueous method for the synthesis of size-controlled highly crystalline zinc ferrite/reduced graphene oxide (ZFO/rGO) aerogel was provided by using benzyl alcohol as the medium. In our findings, benzyl alcohol was introduced not only as the solvent, but the structure-directing agent and strong reducing agent during the nucleation and growth of ZnFe2O4 nanoparticles (NPs). The characterization analysis indicated that ZnFe2O4 NPs were immobilized on the multilayer rGO with a controllable size of 12 nm. Moreover, the 3D ZFO/rGO aerogel shows excellent electrochemical property as a facile electrochemical sensor for the detection of p-nitrophenol (p-NP). The ZFO/rGO electrochemical sensing offers the advantages of wide linear range (1-500 µmol l-1), excellent sensitivity (23.985 mA mM-1 cm-2), good stability and selectivity (<8.8%). In addition, the possible reaction mechanism of 3D ZFO/rGO aerogel was explained during the detection process under acidic condition. Significantly, our results not only provided insight into the possible reaction mechanism of 3D ZFO/rGO nanocomposite, but proposed the way for the synthesis of highly crystalline materials through a benzyl alcohol-mediated method.

Selective adsorption of organic dyes by porous hydrophilic silica aerogels from aqueous system.

Hydrophilic silica aerogel (HSA) was obtained by sol-gel method and dried at ambient conditions and further studied for the removal of organic dyes in water. Silica aerogel was characterized by its morphology, porous structure, specific surface area and particle size distribution by scanning electron microscopy, Brunauer-Emmett-Teller and pore size distribution. The HSA after calcination had a specific surface area of 888.73 m2/g and an average particle size of 2.6341 nm. Moreover, adsorption properties of the HSA toward organic dyes - adsorption conditions, kinetics data, and equilibrium model - were investigated. The removal rate of cationic dyes (rhodamine B (RhB), methylene blue (MB) and crystal violet (CV)) by HSA was up to 90%, while the removal rate of anionic dye (acid orange 7) was not more than 30%. The maximum adsorptions were: RhB 191.217 mg/g, MB 51.1601 mg/g and CV 24.85915 mg/g, respectively. Based on the adsorption mechanism of HSA for cationic/anionic dyes, the conclusion confirmed the prospect of HSA as effective adsorbent to treat cationic dyes wastewater.

L-cysteine-assisted synthesis of hierarchical NiS2 hollow spheres supported carbon nitride as photocatalysts with enhanced lifetime.

Novel hierarchical NiS2 hollow spheres modified by graphite-like carbon nitride were prepared using a facile L-cysteine-assisted solvothermal route. The NiS2/g-C3N4 composites exhibited excellent photocatalytic efficiency in rhodamine B, methyl orange and ciprofloxacin degradation as compared to single g-C3N4 and NiS2, which could be due to the synergistic effects of the unique hollow sphere-like structure, strong visible-light absorption and increased separation rate of the photoinduced electron-hole pairs at the intimate interface of heterojunctions. A suitable combination of g-C3N4 with NiS2 showed the best photocatalytic performance. In addition, an electron spin resonance and trapping experiment demonstrated that the photogenerated hydroxyl radicals and superoxide radicals were the two main photoactive species in photocatalysis. A possible photocatalytic mechanism of NiS2/g-C3N4 composites under visible light irradiation is also proposed. The strategy presented here can be extended to a general strategy for constructing 3D/2D heterostructured photocatalysts for broad applications in photocatalysis.

In situ synthesis of silver supported nanoporous iron oxide microbox hybrids from metal-organic frameworks and their catalytic application in p-nitrophenol reduction.

Ag nanoparticles (NPs) are successfully grown in situ on nanoporous Fe2O3 microboxes (Ag/Fe2O3) simply by annealing Prussian blue (PB) in the presence of silver nitrate for the first time. The catalytic activity of the Ag/Fe2O3 microboxes for the reduction of p-nitrophenol (PNP) with NaBH4 is measured by UV-vis spectroscopy. It is found that the composites exhibit bifunctional properties with high magnetization and excellent catalytic activity toward PNP reduction. The high catalytic activity of the catalyst might be attributed to its high surface area and the synergistic effect on the delivery of electrons between Ag NPs and Fe2O3 microboxes. In addition, efficient reduction is observed and found to depend upon the content of Ag in the Ag/Fe2O3 microboxes. The dosage of the catalyst and the reaction temperature were investigated. Furthermore, the catalysts can be easily recycled by applying an external magnetic field while maintaining the catalytic activity without significant decrease even after running six times. The unique properties provide an ideal platform to study various metal/Fe2O3 catalysts which can be potentially applied in a wide variety of fields of catalysis and green chemistry.

Three N-H functionalized metal-organic frameworks with selective CO2 uptake, dye capture, and catalysis.

Three N-H functionalized metal-organic frameworks, Pb-DDQ, Zn-DDQ, and Cu-DDQ, were synthesized with a new flexible dicarboxylate ligand based on quinoxaline (H2DDQ = N,N'-dibenzoic acid-2,3-diaminoquinoxaline). CO2 adsorptions indicate that Zn-DDQ and Cu-DDQ have greatly enhanced the CO2 uptake due to the opposite N-H groups on pyrazine. With very small adsorption of N2, Cu-DDQ shows high selectivity for CO2 and N2. The three MOFs also have large adsorptions of some selected dyes, while Zn-DDQ and Cu-DDQ with large but different shapes of pores are demonstrated to be promising materials for fast separation of MB/other and CV/other mixtures, respectively. The cyanosilylation of aldehydes and ketones with high yields in a short reaction time for Cu-DDQ indicates that Cu-DDQ has a higher Lewis acidity than the other two MOFs.

Nitrogen- and fluorine-doped bimetallic carbide as active and stable oxygen reduction reaction electrocatalyst.

Nitrogen- and fluorine-doped bimetallic carbide composites with graphite matrix (abbreviated as C19Cr7Mo24/NG and C19Cr7Mo24/FG) are synthesized through carbonization at 1300 °C. The C19Cr7Mo24/NG displays an initial half-wave potential (E1/2) of 0.873 V and suffers merely 3 mV decrease in E1/2 within 60,000 CV cycles for oxygen reduction reaction (ORR) in alkaline media. A H2/O2 fuel cell testing system using the C19Cr7Mo24/NG as cathode maintains 95.9% of the initial peak power density (1.08 W cm-2) within 60,000 cycles. The C19Cr7Mo24/FG shows higher ORR activity than the C19Cr7Mo24/NG. The positive and negative charge centers caused by the N or F dopants are the critical reasons to their high activities. While F and bimetallic carbide more favor electron transfer respectively than the N and monometallic carbide. Their excellent stabilities originate from interactions among atoms due to electron transfer and the intrinsic chemical inertness of graphite and bimetallic carbides.

Strontium doped Fe-based porous carbon for highly efficient electrocatalytic ORR and MOR reactions.

The catalytic activity improvement of Fe-based active sites derived from metal organic frameworks toward oxygen reduction reaction (ORR) and methanol oxidation reaction (MOR) remains a major challenge. In this study, the growth of strontium decorated 2-methylimidazole zinc salt (Sr/ZIF-8) is prepared as a carrier to vapor deposited iron formation Sr doped Fe-based nitrogen-doped carbon framework (named as Sr/FeNC). After high-temperature pyrolysis and vapor deposition, strontium carbonate nanocrystals are evenly dispersed on the shrunk dodecahedron carbon frame and multitudinous Fe-based active catalytic sites are embedded in carbon skeleton. The optimal Sr/FeNC-2 catalyst demonstrates the outstanding ORR performance in terms of a half-wave potential of 0.851 V and an onset potential of 0.90 V, while Sr/FeNC-2 exhibits a high current density of 18.2 mA cm-2 and a lower Tafel slope of 21 mV dec-1 in MOR. The exceptional catalytic activity could be ascribed to the synergistic coupling effect of strontium compounds with Fe-based catalytic sites (Fe-Nx, Fe, and iron oxide). In particular, the formation of SrCO3 affects the bonding configuration of the iron species sites, leading to an optimization of the electronic structure within the multihole carbon matrix. The synthetic approach presents a prospective strategy for future endeavors in developing innovative and advanced bifunctional catalysts for ORR and MOR.

Negative differential resistance in MX- and MMX-type iodide-bridged platinum complexes.

Negative differential resistance (NDR) was discovered in MX- and MMX-type iodide-bridged platinum complexes for the first time. The low resistance of the complex observed under the large current cannot be explained only by the Joule heat. The intrinsic charge-ordering states are considered to play an important role in the NDR of these compounds.

Boosting activity on copper functionalized biomass graphene by coupling nanocrystalline Nb2O5 as impressive rate capability for supercapacitor and outstanding catalytic activity for oxygen reduction.

A novel and hierarchical porous but cross-linked copper-doped biomass graphene (Cu@HPBG) combined with Nb2O5 (denoted as Nb2O5/Cu@HPBG) is successfully fabricated on a large-scale using fig peels as biomass carbon and copper as the graphitization catalyst. During the synthesis process, basic copper carbonate serves dual functions of pore-forming agent, as well as homogeneous copper provider, and NH3 is employed as a defect-forming agent and N dopant. Owing to the porous hierarchical structure increased availability of contact interface and pseudo capacitance active sites provided by copper and Nb2O5, the assembled asymmetrical supercapacitor (ASC) employing Nb2O5/Cu@HPBG as positive electrode and HPBG as negative electrode can not only widen the stability window range of 0～1.9 V, but also deliver a maximum gravimetric energy density of 82.8 W h kg-1 at the power density of 950.0 W kg-1 and maintain a remarkable cycling stability of 97.1% after 15,000 cycles. Impressively, due to the synergistic enhancement of Cu@HPBG and Nb2O5, the resulting Nb2O5/Cu@HPBG hybrid displays more positive half wave potential (∼0.85 V) and a long-life stability than Pt/C electrode toward oxygen reduction reaction (ORR). Our research provides a feasible strategy to fabricate renewable biomass graphene electroactive composites for large-scale supercapacitor electrodes and efficient ORR catalysts toward energy applications.

Recent advances in understanding and design of efficient hydrogen evolution electrocatalysts for water splitting: A comprehensive review.

An unsustainable reliance on fossil fuels is the primary cause of the vast majority of greenhouse gas emissions, which in turn lead to climate change. Green hydrogen (H2), which may be generated by electrolyzing water with renewable power sources, is a possible substitute for fossil fuels. On the other hand, the increasing intricacy of hydrogen evolution electrocatalysts that are presently being explored makes it more challenging to integrate catalytic theories, catalytic fabrication procedures, and characterization techniques. This review will initially present the thermodynamics, kinetics, and associated electrical and structural characteristics for HER electrocatalysts before highlighting design approaches for the electrocatalysts. Secondly, an in-depth discussion regarding the rational design, synthesis, mechanistic insight, and performance improvement of electrocatalysts is centered on both the intrinsic and extrinsic influences. Thirdly, the most recent technological advances in electrocatalytic water-splitting approaches are described. Finally, the difficulties and possibilities associated with generating extremely effective HER electrocatalysts for water-splitting applications are discussed.

Reactivity and mechanistic insight into Visible-light-Induced anerobic selective reaction by Ag/brookite titania.

Ag-loaded brookite titania (Ag/TiO2(B)) nanocomposites were prepared via photochemical reduction using silver acetate and pure TiO2(B) as precursor. The samples were characterized by X-ray diffraction spectrometry (XRD), ultraviolet-visible diffuse reflectance spectrometry (UV-vis DRS), transmission electron microscopy (TEM) and photoluminescence spectra (PL). Photocatalytic degradation of Rhodamine B (Rh B) and photocatalytic oxidation of benzyl alcohol served as a probe reaction to evaluate the photocatalytic activity of the as-prepared nanocomposites under visible light irradiation(lambda > 400 nm). The results indicate different Ag loading amount influence the activity of the samples, among which Ag/TiO2(B) with 2.5 wt% Ag content exhibited the best photodegradation activity of Rh B as well as the highest selectivity for photocatalytic oxidation of benzyl alcohol. The effect of Ag loading and reaction substrates on the performance of Ag/TiO2(B) is investigated in detail. Based on the characterization results and frontier electron density theory (FED) calculation, possible mechanism of the photocatalytic oxidation of benzyl alcohol by photo-generated holes is discussed.

Chrysanthemum-like FeS/Ni3S2 heterostructure nanoarray as a robust bifunctional electrocatalyst for overall water splitting.

The development of a scalable strategy to prepare highly efficient and stable bifunctional electrocatalysts is the key to industrial electrocatalytic water splitting cycles to produce clean hydrogen. Here, a simple and quick one-step hydrothermal method was used to successfully fabricate a three-dimensional core chrysanthemum-like FeS/Ni3S2 heterogeneous nanoarray (FeS/Ni3S2@NF) on a porous nickel foam skeleton. Compared with the monomer Ni3S2@NF, the chrysanthemum-like FeS/ Ni3S2@NF heterostructure nanomaterials have improved catalytic performance in alkaline media, showing low overpotentials of 192 mV (η10) and 130 mV (η-10) for OER and HER, respectively. This study attests that integrated interface engineering and precise morphology control are effective strategies for activating the Ni3+/Ni2+ coupling, promoting charge transfer and improving the intrinsic activity of the material to accelerate the OER reaction kinetics and promote the overall water splitting performance. The scheme can be reasonably applied to the design and development of transition metal sulfide-based electrocatalysts to put into industrial practice of electrochemical water oxidation.

Prostate cancer biomarker citrate detection using triaminoguanidinium carbon dots, its applications in live cells and human urine samples.

Citrate is a tricarboxylate, plays vital role in prostate cancer (PC) and the level of citrate is an indicator for PC identification. Herein, triaminoguanidine carbon dots (TAG-CDs) prepared by one step hydrothermal method and used as a citrate receptor. Notably the TAG-CDs without alkaline treatment were highly fluorescent at pH 7 with high quantum yield (11.3%). TAG-CDs were characterized through TEM, XRD, FT-IR, UV-vis and spectrofluorimetry. It is noted that the average size was of 2.8 nm, the presence of highly disordered carbon, retain the functionality of TAG. The absorbance maxima obtained at 294 nm and good emitting response observed at 396 nm. The Y-aromaticity of receptor guanidinium moiety acts as Lewis acid and have peculiar interaction with Lewis base citrate via electrostatic interaction and also protons in the TAG participate hydrogen bonds with citrate, which causes quenching of TAG-CDs. From the obtained linear quenching equation the LOD was found to be 4 nM. The probe expressed high selectivity, high interference tolerance (500 - fold), fast response in 15 mins and good biocompatible. Finally, TAG-CDs utilized for the intracellular imaging of citrate in live MCF-7 cells, it showed good cytotoxicity and delivered contrast images in presence, absence of citrate. TAG-CDs detected the citrate level in human urine samples, the obtained results are validated with HPLC method.

Bis(2,2'-bipyridine-κN,N')(nitrato-κO)copper(II) perchlorate.

In the title compound, [Cu(NO(3))(C(10)H(8)N(2))(2)]ClO(4), the five-coordinated Cu(II) atom has a distorted square-pyramidal CuN(4)O environment; the O atom is in the axial position whereas the N atoms from two bipyridine (bipy) ligands are in the equatorial plane. In the crystal, mol-ecules are assembled by C-H⋯O hydrogen bonding and π-π inter-actions between bipy groups [centroid-centroid distances = 3.7686 (16) and 3.7002 (16) Å] into a three-dimensional network. The nitrite anion is equally disordered over two sets of sites.

4-[2-(Hydrogen phosphonato)-2-hydroxy-2-phosphonoethyl]pyridinium.

The title compound, C(7)H(11)NO(7)P(2), exists as a zwitterion in which the positive charge resides on the protonated pyridyl N atom and the negative charge on one of the two phosphate groups. In the crystal, adjacent molcules are linked by O-H⋯O and N-H⋯O hydrogen bonds into a three-dimensional network.

Novel broad-spectrum-driven g-C3N4 with oxygen-linked band and porous defect for photodegradation of bisphenol A, 2-mercaptophenthiazole and ciprofloxacin.

Abundant active oxygen free radicals could efficiently remove refractory organic pollutants. In previous research, the original carbon nitride can form more hydrogen peroxide, however, owing to the limitation of its band structure, the original carbon nitride cannot decompose the hydrogen peroxide to generate more active oxygen free radicals. Herein, this work reports a simple bottom-up synthesis method, which synthesize a broad-spectrum-response carbon nitride (CN-CA) with oxygen-linked band and porous defect structure, while adjusting the band structure, and the introduction of the oxygen-linked band structure can also decompose the hydrogen peroxide produced by the original carbon nitride to form more active oxygen free radicals. Instrumental characterization and analysis of experimental results revealed the important role of oxygen-linked band and porous defects in adjusting the CN-CA energy band structure and improving its visible light absorption. The optimal CN-CA displays an outstanding photocatalytic degradation ability, that degradation rate of bisphenol A (BPA) reaches 99.8% within 150 min, the reaction rate constant of which is 6.77 times higher than that of pure g-C3N4, as also demonstrated with 2-mercaptophenthiazole (MBT) and ciprofloxacin (CIP). Meanwhile, the excellent degradation performance under blue LED (450-462 nm) and green LED (510-520 nm) exhibits the broad-spectrum characteristics of CN-CA. The degradation pathways of BPA and MBT were analyzed via HPLC-MS. Moreover, the primary active species were detected as O2-, OH and h+ based on the trapping experiments and ESR. This research provides a new strategy for g-C3N4 modified by porous defects and oxygen-linked band structure for environmental remediation.