RESUMO
Biology-guided radiotherapy (BgRT) is a novel technique of external beam radiotherapy, combining positron emission tomography-computed tomography (PET-CT) with a linear accelerator (LINAC). The key innovation is to utilize PET signals from tracers in tumor tissues for real-time tracking and guiding beamlets. Compared with a traditional LINAC system, a BgRT system is more complex in hardware design, software algorithm, system integration and clinical workflow. RefleXion Medical has developed the world's first BgRT system. Nevertheless, its actively advertised function, PET-guided radiotherapy, is still in the research and development phase. In this review study, we presented a number of issues related to BgRT, including its technical advantages and potential challenges.
Assuntos
Tomografia por Emissão de Pósitrons combinada à Tomografia Computadorizada , Radioterapia Guiada por Imagem , Planejamento da Radioterapia Assistida por Computador/métodos , Algoritmos , Aceleradores de Partículas , Biologia , Radioterapia Guiada por Imagem/métodos , Dosagem RadioterapêuticaRESUMO
Portable radiation detectors are widely used in environmental radiation detection and medical imaging due to their portability feature, high detection efficiency, and large field of view. Lutetium-yttrium oxyorthosilicate (LYSO) is a widely used scintillator in gamma radiation detection. However, the structure and the arrangement of scintillators limit the sensitivity and detection accuracy of these radiation detectors. In this study, a novel portable sensor based on a monolithic LYSO ring was developed for the detection of environmental radiation through simulation, followed by construction and assessments. Monte Carlo simulations were utilized to prove the detection of gamma rays at 511 keV by the developed sensor. The simulations data, including energy resolutions, decoding errors, and sensitivity, showed good potential for the detection of gamma rays by the as-obtained sensor. The experimental results using the VA method revealed decoding errors in the energy window width of 50 keV less than 2°. The average error was estimated at 0.67°, a sufficient value for the detection of gamma radiation. In sum, the proposed radiation sensor appears promising for the construction of high-performance radiation detectors and systems.
Assuntos
Lutécio , Ítrio , Raios gama , Método de Monte Carlo , Tomografia por Emissão de PósitronsRESUMO
As a commonly used solution, the multi-ended readout can measure the depth-of-interaction (DOI) for positron emission tomography (PET) detectors. In the present study, the effects of the multi-ended readout design were investigated using the leading-edge discriminator (LED) triggers on the timing performance of time-of-flight (TOF) PET detectors. At the very first, the photon transmission model of the four detectors, namely, single-ended readout, dual-ended readout, side dual-ended readout, and triple-ended readout, was established in Tracepro. The optical simulation revealed that the light output of the multi-ended readout was higher. Meanwhile, the readout circuit could be triggered earlier. Especially, in the triple-ended readout, the light output at 0.5 ns was observed to be nearly twice that of the single-ended readout after the first scintillating photon was generated. Subsequently, a reference detector was applied to test the multi-ended readout detectors that were constructed from a 6 × 6 × 25 mm3 LYSO crystal. Each module is composed of a crystal coupled with multiple SiPMs. Accordingly, its timing performance was improved by approximately 10% after the compensation of fourth-order polynomial fitting. Finally, the compensated full-width-at-half-maximum (FWHM) coincidence timing resolutions (CTR) of the dual-ended readout, side dual-ended readout, and triple-ended readout were 216.9 ps, 231.0 ps, and 203.6 ps, respectively.
Assuntos
Tomografia por Emissão de Pósitrons , Contagem de Cintilação , Algoritmos , Simulação por Computador , FótonsRESUMO
This paper presented a non-uniform multiphase (NUMP) time-to-digital converter (TDC) implemented in a field-programmable gate array (FPGA) with real-time automatic temperature compensation. NUMP-TDC is a novel, low-cost, high-performance TDC that has achieved an excellent performance in Altera Cyclone V FPGA. The root mean square (RMS) for the intrinsic timing resolution was 2.3 ps. However, the propagation delays in the delay chain of some FPGAs (for example, the Altera Cyclone 10 LP) vary significantly as the temperature changes. Thus, the timing performances of NUMP-TDCs implemented in those FPGAs are significantly impacted by temperature fluctuations. In this study, a simple method was developed to monitor variations in propagation delays using two registers deployed at both ends of the delay chain and compensate for changes in propagation delay using a look-up table (LUT). When the variations exceeded a certain threshold, the LUT for the delay correction was updated, and a bin-by-bin correction was launched. Using this correction approach, a resolution of 8.8 ps RMS over a wide temperature range (5 °C to 80 °C) had been achieved in a NUMP-TDC implemented in a Cyclone 10 LP FPGA.
RESUMO
The Lutetium-Yttrium Oxyorthosilicate (LYSO) is one of the most widely used scintillation crystal in the high-performance Positron Emission Tomography (PET) systems. The quality of the surface finish of the LYSO has an important impact on the light output, the decoding performance, the energy resolution and timing resolution of the PET detectors and systems. In this paper, we present an ultra-precise method for processing the surface of LYSO crystals. The hardness and elastic modulus of the crystals were initially measured using Nano indentation technology. The scintillators were fixed onto the plate in sparse, serried and continuous arrangements and polished using an alumina (Al2O3) and cerium oxide (CeO2) polishing solution with particles of varying size. We used a magnetorheological-polishing technique to polish the LYSO crystals. The polishing solution here included hydroxyl iron powder and hard abrasives. The hardness and elastic modulus of the crystals in question was, respectively, 11.18 ± 0.50 and 155.78 ± 4gigapascals (GPa). A 3D optical surface profiler (3D-OPS) and an atomic force microscope (AFM) were used to evaluate the quality of the polished surfaces. The average roughness of Ra 0.55 nm measured by 3D-OPS was achieved using a precise plate grinding and polishing technique. The magnetorheological-polishing method also obtained an excellent roughness of Ra 0.75 nm (3D-OPS). Our report of the use of these processing technologies can serve as a foundation for further in-depth research regarding the optimal techniques for scintillator surface processing.
RESUMO
Reading out from large-scale silicon photomultiplier (SiPM) arrays is a fundamental technical obstacle blocking the application of revolutionary SiPM technologies in nuclear imaging systems. Typically, it requires using dedicated application-specific integrated circuits (ASICs) that need a long iterative process, special expertise, and tools to develop. The pico-positron emission tomography (Pico-PET) electronics system is an advanced 100-channel readout system based on 1-bit sigma-delta modulation and a field-programmable gate array (FPGA). It is compact (6 × 6 × 0.8 cm3 in size), consumes little power (less than 3W), and is constructed with off-the-shelf low-cost components. In experimental studies, the Pico-PET system demonstrates excellent and consistent performance. In addition, it has some unique features that are essential for nuclear imaging systems, such as its ability to measure V-I curves, breakdown voltages, and the dark currents of 100 SiPMs accurately, simultaneously, and in real time. The flexibility afforded by FPGAs allows multiple-channel clustering and intelligent triggering for different detector designs. These highly sought-after features are not offered by any other ASICs and electronics systems developed for nuclear imaging. We conclude that the Pico-PET electronics system provides a practical solution to the long-standing bottleneck problem that has limited the development of potentially advanced nuclear imaging technology using SiPMs.
RESUMO
We present a nonuniform multiphase (NUMP) method to construct a high-resolution time-to-digital converter (TDC) for low-cost field-programmable gate array (FPGA) devices. The NUMP method involves a system clock being passed through a series of delay elements to generate multiple clocks with different phase shifts. The phases of the rising and falling edges of all the clocks are sorted in order and the states of all the clocks are latched when a hit signal arrives. The sizes of the time bins (and precision) of the NUMP method are not limited by the uniformity and minimum value of the time delays of the delay lines. In theory, any delay sources with small jitters in an FPGA, not just very fine carry chains, can be used in the NUMP method to delay and randomize the clocks. Thus, the NUMP method can achieve excellent TDC timing resolutions in low-cost FPGAs without very fine delay lines. We implemented four NUMP TDC channels in a low-cost FPGA device (an Altera Cyclone V 5CEBA4F23C7N). The performance of the four NUMP TDCs was evaluated using both internal and external pulses. The root mean square (rms) for the timing resolution measured using the internal and the external pulses with short-time intervals (less than 1 ns) was 2.3 and 5.2 ps, respectively. A 14.1-ps rms timing resolution was measured at a time interval of 517 ns. The NUMP method is suitable for applications that require a number of high-performance TDC channels in a low-cost FPGA.
RESUMO
Efficient and comprehensive analysis of lipid profiles in yak ghee samples collected from different elevations is crucial for optimal utilization of these resources. Unfortunately, such research is relatively rare. Yak ghee collected from three locations at different altitudes (S2: 2986 m; S5: 3671 m; S6: 4508 m) were analyzed by quantitative lipidomic. Our analysis identified a total of 176 lipids, and 147 s lipid of them were upregulated and 29 lipids were downregulated. These lipids have the potential to serve as biomarkers for distinguishing yak ghee from different altitudes. Notably, S2 exhibited higher levels of fatty acids (21:1) and branched fatty acid esters of hydroxy fatty acids (14:0/18:0), while S5 showed increased levels of phosphatidylserine (O-20:0/19:1) and glycerophosphoric acid (19:0/22:1). S6 displayed higher levels of triacylglycerol (17:0/20:5/22:3), ceramide alpha-hydroxy fatty acid-sphingosine (d17:3/34:2), and acyl glucosylceramides (16:0-18:0-18:1). Yak ghee exhibited a high content of neutralizing glycerophospholipids and various functional lipids, including sphingolipids and 21 newly discovered functional lipids. Our findings provide insights into quantitative changes in yak ghee lipids during different altitudes, development of yak ghee products, and screening of potential biomarkers.
RESUMO
Bats have a very long evolutionary history and are highly differentiated in their physiological functions. Results of recent studies suggest effects of some host factors (e.g., phylogeny and dietary habit) on their gut microbiota. In this study, we examined the gut microbial compositions of 18 different species of bats. Results showed that Firmicutes, Gammaproteobacteria, and Actinobacteria were dominant in all fecal samples of bats. However, the difference in the diversity of gut microbiota among bats of different phylogenies was notable (p = 0.06). Various species of Firmicutes, Actinobacteria, and Gammaproteobacteria were found to contribute to the majority of variations in gut microbiota of all bats examined, and Aeromonas species were much more abundant in bats that feed on both insects and fish than in those of insectivores. The abundance of various species of Clostridium, Euryarchaeota, and ancient bacterial phyla was found to vary among bats of different phylogenies, and various species of Vibrio varied significantly among bats with different dietary habits. No significant difference in the number of genes involved in various metabolic pathways was detected among bats of different phylogenies, but the abundance of genes involved in 5 metabolic pathways, including transcription; replication, recombination, and repair; amino acid transport and metabolism; and signal transduction mechanisms, was different among bats with different dietary habits. The abundance of genes in 3 metabolic pathways, including those involved in stilbenoid, diarylheptanoid, and gingerol biosynthesis, was found to be different between insectivorous bats and bats that feed on both insects and fish. Results of this study suggest a weak association between dietary habit and gut microbiota in most bats but a notable difference in gut microbiota among bats of different phylogenies.
RESUMO
Objective: To determine the effect of laser needle-knife on vertebroarterial morphology, fibrinogen and blood viscosity in a rabbit model of cervical spondylotic arteriopathy (CSA) and the mechanism of action involved. Methods: A number of 40 healthy common grade rabbits were divided into four groups: normal control, model, acupuncture, and laser needle knife group. The normal control group does not establish a CSA rabbit model, and the other groups all establish a CSA rabbit model, but they are treated in different ways. CSA model rabbits were treated with acupuncture and moxibustion at "fengchi" and "cervical Jiaji" points, rabbits in the laser needle knife group were treated with "Jiaji" points, and the acupuncture points were punctured with the laser needle knife. The location of the acupuncture points is determined according to the acupoint map of the experimental map. The right vertebroarterial morphology before and after the treatment was analyzed by scanning electron microscope, and FIB concentration and blood viscosity were determined using the coagulation method. Results: After the treatment, the capillary and micropore hyperplasia in the laser needle knife group were more evident than that in the model group. Acupuncture and laser needle knife therapy can reduce whole blood viscosity (1/s, 5/s), and that the distinction between the two treatments is not statistically evident. Conclusion: Acupuncture and laser needle knife can regulate the coagulation and fibrinolysis system in CSA, stimulate capillary and micropore hyperplasia, reduce blood viscosity, and improve blood circulation, which may be one of the therapeutic mechanisms behind the laser needle knife treatment of CSA.
RESUMO
Changes in soil micronutrient availability may have adverse consequences on grassland productivity, yet it's still largely unclear how concurrent human practices, such as fertilization and mowing, affect micronutrient cycling in the plant-soil systems. Here, we measured six essential micronutrient (Fe, Mn, Cu, Zn, Co and Mo) contents in both plant pool (separated as aboveground plant parts, litter, and belowground roots) at the community level and soil pool (0−10 cm depth) after 12-year consecutive nitrogen (N) addition (0, 2, 10, and 50 g N m−2 year−1) and mowing in a typical steppe of the Mongolian Plateau. The results show that (i) medium-N (10 g m−2 year−1) and high-N (50 g m−2 year−1) addition rates significantly increased contents of soil-available Fe (+310.0%, averaging across the two N addition rates), Mn (+149.2%), Co (+123.6%) and Mo (+73.9%) irrespective of mowing treatment, whereas these addition treatments usually decreased contents of soil total Fe (−8.9%), Mn (−21.6%), Cu (−15.9%), Zn (−19.5%), Co (−16.4%) and Mo (−34.7%). (ii) Contents of Fe in aboveground plant parts, litter, and roots significantly decreased, whereas plant Mn increased with N addition. Contents of above ground plant Cu, Zn, Co, and Mo significantly decreased at high-N addition rate, whereas contents of micronutrients in roots and litters, except for Fe, generally increased with N addition. Moreover, the total amount of micronutrients in the plant pool (contents × biomass) significantly increased at the medium-N addition rate but decreased at the high-N addition rate. All N addition rates significantly enlarged the pool of litter micronutrients, and roots could hold more micronutrients under N addition, especially combined with mowing treatment. Importantly, although mowing could regulate the effects of N addition on variables (i) and (ii), the effects were weaker overall than those of N addition. (iii) Changes in root micronutrients, except for Mn, could explain corresponding changes in plant micronutrients (R2: 0.19−0.56, all p < 0.01), and significant linear correlations were also observed between soil-available Fe and Fe in plant and roots. Aboveground plant Mn was significantly correlated with soil-available Mn, while Co and Mo in roots were also significantly correlated with soil-available Co and Mo. These results indicate that soil micronutrient supply capacity may decrease due to a decrease in total micronutrient contents after long-term N addition and mowing. They also suggest that different magnitude responses of soil micronutrients in plants (i.e., litters, roots) and soil should be considered when comprehensively examining nutrient cycling in grassland ecosystems.
RESUMO
This study aimed to examine the effects of steam explosion (SE) pretreatment on the structural characteristics and immunostimulatory activity of polysaccharide from Poria cocos. Results showed that the average molecular weights of native polysaccharide (PCP) and SE-pretreated polysaccharide (SEPCP) were 18.67 and 6.52 kDa, respectively. PCP and SEPCP shared the same profiles of monosaccharides (mannose, glucose, galactose, and fucose) in different composition ratios, that is, PCP in a molar percentage of 13.5:33:40.3:13.2 and SEPCP in a molar percentage of 2.1:90.3:5.8:1.8. The surface structure of PCP showed smooth and densely spherical particles, whereas SEPCP had a rough surface and porous honeycomb structure. The main linkage types of PCP comprised 1,6-α-d-Galp, 1,2,6-α-d-Glcp, and T-α-d-Manp, whereas SEPCP primarily contained 1,3-ß-d-Glcp backbone and T-ß-d-Glcp branches. Compared with PCP, we further revealed that SEPCP had a better immune enhancement on the phagocytic ability, NO production, and the secretion levels of TNF-α and IL-6 in RAW 264.7 cells. Collectively, our observations supported that SE pretreatment could help to change the structure and improve the immunostimulatory activity of polysaccharide from P. cocos. PRACTICAL APPLICATIONS: SE technology is extensively used to extract bioactive components with improved yields owing to this technology's benefits of low energy consumption and high efficiency. SE pretreatment was found to contribute to the destruction of cell-wall structure, which could help to enhance the extraction yields of P. cocos polysaccharide (PCP). Meanwhile, SE pretreatment also could change the structural features and improve the immunostimulatory activity of PCP. This study revealed that more bioactive PCP with strengthened immunoregulatory effect was obtained pretreated by SE. This study was able to provide the effective information on the application of steam explosion technology to promote the further development and utilization of PCP in the pharmaceutical and functional food fields.
Assuntos
Wolfiporia , Fucose , Galactose , Glucose , Interleucina-6 , Manose , Monossacarídeos , Preparações Farmacêuticas , Polissacarídeos/química , Polissacarídeos/farmacologia , Vapor , Fator de Necrose Tumoral alfaRESUMO
Including apolipoprotein E-ε4 (APOE-ε4) status and older age into consideration may increase the accuracy of plasma Aß42/Aß40 detecting Aß+ individuals, but the rationale behind this remains to be fully understood. Besides, both Aß pathology and vascular diseases are related to neurodegeneration and cognitive decline, but it is still not fully understood how APOE-ε4 modulates these relationships. In this study, we examined 241 non-demented Alzheimer's Disease Neuroimaging Initiative participants to investigate the associations among age, white matter hyperintensities (WMH), hypertension, hyperlipidemia, body mass index (BMI), plasma Aß42/Aß40 measured by liquid chromatography tandem mass spectrometry, and 18F-florbetapir Aß PET as well as their prediction of longitudinal adjusted hippocampal volume (aHCV) and cognition in APOE-ε4 carriers and non-carriers. We found older age predicted faster WMH increase (p = 0.024) and cortical Aß accumulation (p = 0.043) in APOE-ε4 non-carriers only, whereas lower plasma Aß42/Aß40 predicted faster cortical Aß accumulation (p < 0.018) regardless of APOE-ε4 status. While larger WMH and underweight predicted (p < 0.05) faster decreases in aHCV and cognition in APOE-ε4 non-carriers, lower plasma Aß42/Aß40 predicted (p < 0.031) faster decreases in aHCV and cognition in APOE-ε4 carriers. Higher Aß PET also predicted faster rates of aHCV (p = 0.010) in APOE-ε4 carriers only, but was related to faster rates of cognitive decline (p < 0.022) regardless of APOE-ε4 status. These findings may provide novel insights into understanding different mechanisms underlie neurodegeneration and cognitive decline in non-demented elderly adults with and without APOE-ε4 allele, which may help the design of anti-Alzheimer's clinical trials.
Assuntos
Doença de Alzheimer , Disfunção Cognitiva , Doenças Vasculares , Adulto , Idoso , Doença de Alzheimer/genética , Apolipoproteína E4/genética , Disfunção Cognitiva/genética , Humanos , Testes NeuropsicológicosRESUMO
Extracellular ß-amyloid plaques and intracellular neurofibrillary tau tangles are the primary hallmarks of Alzheimer's disease. ß-Amyloid pathology can be directly quantified by positron emission tomography imaging or indirectly by measuring the decrease of cerebrospinal fluid ß-amyloid42/ß-amyloid40 ratio. Although these two ß-amyloid biomarkers may be considered interchangeable, they sometimes show discordance, particularly in early stage of Alzheimer's disease. Individuals with cerebrospinal fluid ß-amyloid positive only or ß-amyloid positron emission tomography positive only may be at early amyloidosis stage compared to those who are cerebrospinal fluid ß-amyloid negative and ß-amyloid positron emission tomography negative orcerebrospinal fluid ß-amyloid positive and ß-amyloid positron emission tomography positive. Besides, ß-amyloid pathology may play an initiating role in Alzheimer's disease onset, leading to subsequent tau increases. However, it is still unclear whether individuals with different ß-amyloid pathways have distinct spatial patterns of cortical tau tangles in early amyloidosis stage. In this study, we analyzed 238 cognitively unimpaired and 77 mild cognitive impairment individuals with concurrent (interval of acquisition <1 year) 18F-flortaucipir tau positron emission tomography, ß-amyloid (18F-florbetapir or 18F-florbetaben) positron emission tomography and cerebrospinal fluid ß-amyloid42 and ß-amyloid40 and cerebrospinal fluid p-Tau181 and divided them into four different cerebrospinal fluid/positron emission tomography groups based on the abnormal status of cerebrospinal fluid ß-amyloid42/ß-amyloid40 (cerebrospinal fluid±) and ß-amyloid positron emission tomography (±). We determined the cortical regions with significant tau elevations of different cerebrospinal fluid/positron emission tomography groups and investigated the region-wise and voxel-wise associations of tau positron emission tomography images with cerebrospinal fluid ß-amyloid42/ß-amyloid40, ß-amyloid positron emission tomography and cerebrospinal fluid p-Tau/ß-amyloid40 in early (cerebrospinal fluid positive/positron emission tomography negative and cerebrospinal fluid negative/positron emission tomography positive) and late (cerebrospinal fluid positive/positron emission tomography positive) amyloidosis stages. By compared to the cerebrospinal fluid negative/positron emission tomography negative individuals (Ref) without evidence of tau increase measured by cerebrospinal fluid or positron emission tomography, cerebrospinal fluid positive/positron emission tomography negative individuals showed higher tau in entorhinal but not in BraakIII/IV and BraakV/VI, whereas cerebrospinal fluid negative/positron emission tomography positive individuals had significant tau elevations in BraakV/VI but not in entorhinal and BraakIII/IV. In contrast, cerebrospinal fluid positive/positron emission tomography positive individuals showed significant tau increases in all the cortical regions than the Ref group. The voxel-wise analyses provided further evidence that lower cerebrospinal fluid ß-amyloid42/ß-amyloid40 was associated with higher tau in entorhinal, whilst higher ß-amyloid positron emission tomography was related to higher tau in BraakV/VI regions in early amyloidosis stage. Both lower cerebrospinal fluid ß-amyloid42/ß-amyloid40 and higher ß-amyloid positron emission tomography were correlated with tau aggregation in all the Braak stages regions in late amyloidosis stage. These findings provide novel insights into the spatial patterns of cortical tau tangles in different amyloidosis stages of Alzheimer's disease, suggesting cerebrospinal fluid ß-amyloid and ß-amyloid positron emission tomography discordant groups may have distinct characteristics of cortical tau tangles in early amyloidosis stage.
RESUMO
Preclinical positron emission tomography (PET) is a sensitive and quantitative molecule imaging modality widely used in characterizing the biological processes and diseases in small animals. The purpose of this study is to investigate the methods to optimize a PET detector for high-resolution preclinical imaging. The PET detector proposed in this study consists of a 28 × 28 array of LYSO crystals 0.5 × 0.5 × 6.25 mm3in size, a wedged lightguide, and a 6 × 6 array of SiPMs 3 × 3 mm2in size. The simulation results showed that the most uniform flood map was achieved when the thickness of the lightguide was 2.35 mm. The quality of the flood map was significantly improved by suppressing the electronics noises using the simple threshold method with a best threshold. The peak-to-valley ratio of flood map improved 25.4% when the algorithm of ICS rejection was applied. An energy resolution (12.96% ± 1.03%) was measured on the prototype scanner constructed with 12 proposed detectors. Lastly, a prototype preclinic PET imager was constructed with 12 optimized detectors. The point source experiment was performed and an excellent spatial resolution (axial: 0.56 mm, tangential: 0.46 mm, radial: 0.42 mm) was achieved with the proposed high-performance PET detectors.
Assuntos
Algoritmos , Tomografia por Emissão de Pósitrons , Animais , Simulação por Computador , Eletrônica , Desenho de EquipamentoRESUMO
A practical wearable brain PET scanner capable of dynamic neuroimaging during free bodily movement will enable potential breakthrough basic neuroscience studies and help develop imaging-based neurological diagnoses and treatments. Weight, brain coverage, and sensitivity are three fundamental technical obstacles in the development of Fully Wearable High-Performance (FWHP) brain PET scanners. The purpose of this study is to investigate the feasibility of building a FWHP brain PET using a limited volume of lutetium-yttrium oxyorthosilicate (LYSO) scintillator crystals. Six scanners, consisted of the same volume (2.66 kg) of LYSO scintillators with combinations of 2 different crystal pitches (3 mm and 1.5 mm) and 3 different crystal lengths (20 mm, 10 mm, and 5 mm), were simulated. The performances of the six scanners were assessed and compared with Siemen's HRRT brain PET and mCT whole-body PET, in terms of aperture, axial field of views (AFOV), sensitivity, spatial resolution, count rates, and image noise property. The time-of-flight (TOF) information was included in the image reconstruction to improve the effective sensitivity. The effects of the TOF was assessed by scanning a Jaszczak phantom and reconstructing images with the maximum likelihood expectation maximization (MLEM) algorithm with different timing settings (non-TOF, 500 ps, 200 ps, 100 ps and 50 ps Coincidence Time Resolution, CTR). The signal-noise ratio (SNR) of the images were assessed and compared with those of the HRRT scanner and mCT scanner. The results show that it is possible to construct a FWHP brain PET with better spatial resolution than the dedicated HRRT brain PET, comparable effective sensitivity (with 50 â¼ 100 ps CTR), and whole-brain coverage (23.7 cm inner diameter and 13.4 cm axial field of view) using 2.66 kg of LYSO.
Assuntos
Encéfalo/diagnóstico por imagem , Desenho de Equipamento , Neuroimagem/instrumentação , Tomografia por Emissão de Pósitrons/instrumentação , Dispositivos Eletrônicos Vestíveis , Algoritmos , Processamento de Imagem Assistida por Computador , Lutécio/química , Imagens de Fantasmas , Contagem de Cintilação , Silicatos/química , Ítrio/químicaRESUMO
Mitotic slippage involves cells exiting mitosis without proper chromosome segregation. Although degradation of cyclin B1 during prolonged mitotic arrest is believed to trigger mitotic slippage, its upstream regulation remains obscure. Whether mitotic slippage is caused by APC/CCDC20 activity that is able to escape spindle-assembly checkpoint (SAC)-mediated inhibition, or is actively promoted by a change in SAC activity remains an outstanding issue. We found that a major culprit for mitotic slippage involves reduction of MAD2 at the kinetochores, resulting in a progressive weakening of SAC during mitotic arrest. A further level of control of the timing of mitotic slippage is through p31comet-mediated suppression of MAD2 activation. The loss of kinetochore MAD2 was dependent on APC/CCDC20, indicating a feedback control of APC/C to SAC during prolonged mitotic arrest. The gradual weakening of SAC during mitotic arrest enables APC/CCDC20 to degrade cyclin B1, cumulating in the cell exiting mitosis by mitotic slippage.
Assuntos
Proteínas Adaptadoras de Transdução de Sinal/metabolismo , Pontos de Checagem do Ciclo Celular/genética , Proteínas de Ciclo Celular/metabolismo , Proteínas Mad2/metabolismo , Mitose/genética , Proteínas Nucleares/metabolismo , Proteínas Adaptadoras de Transdução de Sinal/genética , Ciclossomo-Complexo Promotor de Anáfase/metabolismo , Antígenos CD/genética , Antígenos CD/metabolismo , Caderinas/genética , Caderinas/metabolismo , Proteínas Cdc20/genética , Proteínas Cdc20/metabolismo , Proteínas de Ciclo Celular/genética , Ciclina B1/metabolismo , Técnicas de Silenciamento de Genes , Células HeLa , Humanos , Cinetocoros/metabolismo , Proteínas Nucleares/genética , Complexo de Endopeptidases do Proteassoma/metabolismo , RNA Interferente Pequeno/metabolismo , Fuso Acromático/metabolismoRESUMO
Don't tell azole: The first metal-catalyzed direct coupling of metal sulfides with aryl halides and subsequent intramolecular condensation provided substituted benzothiazoles (see scheme). A wide range of functional groups are tolerated under the reaction conditions.
Assuntos
Anilidas/química , Benzotiazóis/síntese química , Cobre/química , Sulfetos/química , Catálise , Iodo/química , Metais/químicaRESUMO
Recent work shows that Pockels effect and optics pump-probe measurement could be utilized as a novel method for 511 keV ionizing radiation photon detection for positron emission tomography (PET) which could potentially overcome the inherent physical limitation for coincidence time resolution of around 100 ps (Tao et al 2016 Phys. Med. Biol. 61 7600-22). In this paper, we embrace this observation and introduce a two-crossed-polarizers based setup to achieve similar detection concept, which is a simpler and more compact setup with comparable ionizing radiation detection capability as the setup used in the previously proposed work. We evaluated the performance of our experimental setup with Lithium Niobate (LiNbO3) and Cadmium Telluride (CdTe) detector crystals, and the desired properties of an ideal detector crystal were discussed. The modulation signal induced by 511 keV photons in both LiNbO3 and CdTe can be detected with repeatable signal amplitude using two-crossed-polarizers based method, while CdTe could provide eight times higher detection sensitivity to 511 keV photons than LiNbO3 under the same bias voltage, suggesting high effective Z number and high density properties of CdTe, as well as a shorter carrier lifetime and lower carrier mobility of LiNbO3. In addition, the strength of modulation signal increased linearly with bias voltage before saturation. The modulation signal strength in LiNbO3 continued to increase after 2000 V due to its high resistivity which could reduce the dark current in the detector, while the modulation signal of CdTe with low resistivity tended to be saturated at a bias voltage higher than 1200 V. Therefore, further increasing the bias voltage for detector crystals (especially for LiNbO3) may enhance the modulation strength and improve the detection sensitivity for annihilation photons.
Assuntos
Fenômenos Ópticos , Tomografia por Emissão de Pósitrons , Radiometria/instrumentação , Compostos de Cádmio , Fótons , Pontos Quânticos , TelúrioRESUMO
PURPOSE: Depth of interaction (DOI) decoding capability is of great importance for positron emission tomography (PET) requiring high resolution. In this study, we presented a novel low-cost DOI detector design with four crystals coupling to one SiPM, based on the method of rectangular light-sharing window (RLSW). A prototype detector was constructed, calibrated, and assessed using the methods of homogeneous radiation and flood map analysis. METHODS: The DOI detector was constructed with a 4 × 4 array of lutetium-yttrium oxyorthosilicate (LYSO) crystals (2.95 mm × 2.95 mm × 20 mm3 ), barium sulfate (BaSO4 ) reflectors, and optical glues. A RLSW 7 mm in height was deployed in the BaSO4 reflectors. A non-DOI detector with identical dimensions and without RLSW was also constructed for comparison. The light-output surface of the detector was air-coupled with a 4 × 4 array of SiPMs (3 mm × 3 mm2 ). The signals generated from the 16 SiPMs were read out by a custom-designed electronic system, and the signals from four adjacent 3 mm SiPMs were summed into one signal to emulate a 2 × 2 array of 6 mm SiPMs. The RLSW caused the DOI-related position shifts of the crystal spots in the flood map. A homogeneous radiation method was used to establish the transfer functions to convert the spot shifts measured from the flood map into DOI measurements. The accuracy of the DOI measurements was assessed with data acquired using the conventional collimated radiation method. RESULTS: All 16 crystals are distinctly separated from each other in the flood map. Twelve crystals, including four central crystals and eight edge crystals, have the DOI capability. The full width half maximum (FWHM) of the DOI measurements of the central crystals and the edge crystals are 3.06 ± 0.08 and 3.79 ± 0.15 mm, respectively, for the configuration with four crystals coupling to one SiPM. By contrast, the FWHMs (3.98 ± 0.16 and 5.12 ± 0.38 mm, respectively) are slightly worse for the configuration with one crystal coupling to one SiPM. The average and standard deviation (STD) of the FWHM energy resolutions of the DOI detector and non-DOI detector were 10.2% ± 0.7% and 10.7% ± 1.7%, respectively. Their FWHM coincidence timing resolutions were 197.0 ± 9.6 and 206.4 ± 13.3 ps, respectively. The RLSW had no significant impact on the energy resolutions and timing resolutions of the DOI detector. CONCLUSIONS: The novel four-crystals-to-one-SiPM coupling technology is a cost-efficient approach to construct high-performance detector modules with DOI capability. The methods of homogeneous radiation and flood map analysis are easy to perform and of good performance. Those methods can be adapted in the clinic PET scanners to enable the capability of DOI measurements.