Enabling Semihydrogenation of Alkynes to Alkenes by Using a Calcium Palladium Complex Hydride.

Selective hydrogenation of alkynes to alkenes requires a catalytic site with suitable electronic properties for modulating the adsorption and conversion of alkyne, alkene as well as dihydrogen. Here, we report a complex palladium hydride, CaPdH2, featured by electron-rich [PdH2]δ- sites that are surrounded by Ca cations that interacts with C2H2 and C2H4 via σ-bonding to Pd and unusual cation-π interaction with Ca, resulting in a much weaker chemisorption than those of Pd metal catalysts. Concomitantly, the dissociation of H2 and hydrogenation of C2Hx (x = 2-4) species experience significant energy barriers over CaPdH2, which is fundamentally different from those reported Pd-based catalysts. Such a unique catalytic environment enables CaPdH2, the very first complex transition-metal hydride catalyst, to afford a high alkene selectivity for the semihydrogenation of alkynes.

Synthesis and decomposition of Li3Na(NH2)4 and investigations of Li-Na-N-H based systems for hydrogen storage.

Previous studies have shown modified thermodynamics of amide-hydride composites by cation substitution, while this work systematically investigates lithium-sodium-amide, Li-Na-N-H, based systems. Li3Na(NH2)4 has been synthesized by combined ball milling and annealing of 3LiNH2-NaNH2 with LiNa2(NH2)3 as a minor by-product. Li3+xNa1-x(NH2)4 releases NaNH2 and forms non-stoichiometric Li3+xNa1-x(NH2)4 before it melts at 234 °C, as observed by in situ powder X-ray diffraction. Above 234 °C, Li3+xNa1-x(NH2)4 releases a mixture of NH3, N2 and H2 while a bi-metallic lithium sodium imide is not observed during decomposition. Hydrogen storage performances have been investigated for the composites Li3Na(NH2)4-4LiH, LiNH2-NaH and NaNH2-LiH. Li3Na(NH2)4-4LiH converts into 4LiNH2-NaH-3LiH during mechanochemical treatment and releases 4.2 wt% of H2 in multiple steps between 25 and 340 °C as revealed by Sievert's measurements. All three investigated composites have a lower peak temperature for H2 release as compared to LiNH2-LiH, possibly owing to modified kinetics and thermodynamics, due to the formation of Li3Na(NH2)4 and LiNa2(NH2)3.

Thermal decomposition of sodium amide, NaNH2, and sodium amide hydroxide composites, NaNH2-NaOH.

Sodium amide, NaNH2, has recently been shown to be a useful catalyst to decompose NH3 into H2 and N2, however, sodium hydroxide is omnipresent and commercially available NaNH2 usually contains impurities of NaOH (<2%). The thermal decomposition of NaNH2 and NaNH2-NaOH composites is systematically investigated and discussed. NaNH2 is partially dissolved in NaOH at T > 100 °C, forming a non-stoichiometric solid solution of Na(OH)1-x(NH2)x (0 < x < ∼0.30), which crystallizes in an orthorhombic unit cell with the space group P212121 determined by synchrotron powder X-ray diffraction. The composite xNaNH2-(1 - x)NaOH (∼0.70 < x < 0.72) shows a lowered melting point, ∼160 °C, compared to 200 and 318 °C for neat NaNH2 and NaOH, respectively. We report that 0.36 mol of NH3 per mol of NaNH2 is released below 400 °C during heating in an argon atmosphere, initiated at its melting point, T = 200 °C, possibly due to the formation of the mixed sodium amide imide solid solution. Furthermore, NaOH reacts with NaNH2 at elevated temperatures and provides the release of additional NH3.

Lithium imide synergy with 3d transition-metal nitrides leading to unprecedented catalytic activities for ammonia decomposition.

Alkali metals have been widely employed as catalyst promoters; however, the promoting mechanism remains essentially unclear. Li, when in the imide form, is shown to synergize with 3d transition metals or their nitrides TM(N) spreading from Ti to Cu, leading to universal and unprecedentedly high catalytic activities in NH3 decomposition, among which Li2NH-MnN has an activity superior to that of the highly active Ru/carbon nanotube catalyst. The catalysis is fulfilled via the two-step cycle comprising: 1) the reaction of Li2NH and 3d TM(N) to form ternary nitride of LiTMN and H2, and 2) the ammoniation of LiTMN to Li2NH, TM(N) and N2 resulting in the neat reaction of 2 NH3⇌N2+3 H2. Li2NH, as an NH3 transmitting agent, favors the formation of higher N-content intermediate (LiTMN), where Li executes inductive effect to stabilize the TM-N bonding and thus alters the reaction energetics.

Synthesis, thermal behavior, and dehydrogenation kinetics study of lithiated ethylenediamine.

The lithiation of ethylenediamine by LiH is a stepwise process to form the partially lithiated intermediates LiN(H)CH2 CH2 NH2 and [LiN(H)CH2 CH2 NH2 ][LiN(H)CH2 CH2 N(H)Li]2 prior to the formation of dilithiated ethylenediamine LiN(H)CH2 CH2 N(H)Li. A reversible phase transformation between the partial and dilithiated species was observed. One dimensional {Lin Nn } ladders and three-dimensional network structures were found in the crystal structures of LiN(H)CH2 CH2 NH2 and LiN(H)CH2 CH2 N(H)Li, respectively. LiN(H)CH2 CH2 N(H)Li undergoes dehydrogenation with an activation energy of 181±8 kJ mol(-1) , whereas the partially lithiated ethylenediamine compounds were polymerized and released ammonia at elevated temperatures. The dynamical dehydrogenation mechanism of the dilithiated ethylenediamine compounds was investigated by using the Johnson-Mehl-Avrami equation.

Lithiated primary amine--a new material for hydrogen storage.

A facile method for synthesizing crystalline lithiated amines by ball milling primary amines with LiH was developed. The lithiated amines exhibit an unprecedented endothermic dehydrogenation feature in the temperature range of 150-250 °C, which shows potential as a new type of hydrogen storage material. Structural analysis and mechanistic studies on lithiated ethylenediamine (Li2EDA) indicates that Li may mediate the dehydrogenation through an α,ß-LiH elimination mechanism, creating a more energy favorable pathway for the selective H2 release.

Alkali and alkaline-earth metal borohydride hydrazinates: synthesis, structures and dehydrogenation.

Four new borohydride hydrazinates, including NaBH4·NH2NH2, LiBH4·1/2NH2NH2, LiBH4·1/3NH2NH2 and Mg(BH4)2·3NH2NH2, were synthesized. NaBH4·NH2NH2 and Mg(BH4)2·3NH2NH2 possess monoclinic and trigonal structures, respectively, while LiBH4·1/2NH2NH2 and LiBH4·1/3NH2NH2 exhibit orthorhombic and monoclinic structures. The effects of composition on the dehydrogenation of hydrazinates were investigated. It is demonstrated that cations with high Pauling electronegativity hold hydrazine strongly in the vicinity of borohydride and result in direct dehydrogenation at elevated temperatures. Specifically, Mg(BH4)2 hydrazinates can directly generate hydrogen upon heating it under a flow of Ar; on the other hand, the Li and Na counterparts lost part or all of the hydrazine components under the same condition. In addition, reducing NH2NH2 content in the complexes leads to improved dehydrogenation properties. Mechanistic investigation of Mg(BH4)2 hydrazinates using isotopic labelling indicates that hydrogen desorption is via homogeneous dissociation of N-N bond of NH2NH2 followed by the establishment of B-N bond and combination of H(δ+) (N) and H(δ-) (B).

Monoammoniate of calcium amidoborane: synthesis, structure, and hydrogen-storage properties.

The monoammoniate of calcium amidoborane, Ca(NH(2)BH(3))(2)·NH(3), was synthesized by ball milling an equimolar mixture of CaNH and AB. Its crystal structure has been determined and was found to contain a dihydrogen-bonded network. Thermal decomposition under an open-system begins with the evolution of about 1 equivalent/formula unit (equiv.) of NH(3) at temperatures <100 °C followed by the decomposition of Ca(NH(2)BH(3))(2) to release hydrogen. In a closed-system thermal decomposition process, hydrogen is liberated in two stages, at about 70 and 180 °C, with the first stage corresponding to an exothermic process. It has been found that the presence of the coordinated NH(3) has induced the dehydrogenation to occur at low temperature. At the end of the dehydrogenation, about 6 equiv. (∼ 10.2 wt %) of hydrogen can be released, giving rise to the formation of CaB(2)N(3)H.

Li+ ionic conductivities and diffusion mechanisms in Li-based imides and lithium amide.

In this study, both experimental ionic conductivity measurements and the first-principles simulations are employed to investigate the Li(+) ionic diffusion properties in lithium-based imides (Li(2)NH, Li(2)Mg(NH)(2) and Li(2)Ca(NH)(2)) and lithium amide (LiNH(2)). The experimental results show that Li(+) ions present superionic conductivity in Li(2)NH (2.54 × 10(-4) S cm(-1)) and moderate ionic conductivity in Li(2)Ca(NH)(2) (6.40 × 10(-6) S cm(-1)) at room temperature; while conduction of Li(+) ions is hardly detectable in Li(2)Mg(NH)(2) and LiNH(2) at room temperature. The simulation results indicate that Li(+) ion diffusion in Li(2)NH may be mediated by Frenkel pair defects or charged vacancies, and the diffusion pathway is more likely via a series of intermediate jumps between octahedral and tetrahedral sites along the [001] direction. The calculated activation energy and pre-exponential factor for Li(+) ion conduction in Li(2)NH are well comparable with the experimentally determined values, showing the consistency of experimental and theoretical investigations. The calculation of the defect formation energy in LiNH(2) reveals that Li defects are difficult to create to mediate the Li(+) ion diffusion, resulting in the poor Li(+) ion conduction in LiNH(2) at room temperature.

Can nitrogen-based complex hydrides be a hydrogen isotope separation material?

A nitrogen-based complex hydride is investigated for hydrogen isotope separation for the first time. The experimental results show that a lithium amide-lithium hydride composite (Li-N-H) possesses a distinct positive isotope effect with a separation factor of 1.42. The H-D exchange process in this system occurs at 373 K and can be accelerated with the increase of temperature.

Stepwise phase transition in the formation of lithium amidoborane.

A stepwise phase transition in the formation of lithium amidoborane via the solid-state reaction of lithium hydride and ammonia borane has been identified and investigated. Structural analyses reveal that a lithium amidoborane-ammonia borane complex (LiNH(2)BH(3).NH(3)BH(3)) and two allotropes of lithium amidoborane (denoted as alpha- and beta-LiNH(2)BH(3), both of which adopt orthorhombic symmetry) were formed in the process of synthesis. LiNH(2)BH(3).NH(3)BH(3) is the intermediate of the synthesis and adopts a monoclinic structure that features layered LiNH(2)BH(3) and NH(3)BH(3) molecules and contains both ionic and dihydrogen bonds. Unlike alpha-LiNH(2)BH(3), the units of the beta phase have two distinct Li(+) and [NH(2)BH(3)](-) environments. beta-LiNH(2)BH(3) can only be observed in energetic ball milling and transforms to alpha-LiNH(2)BH(3) upon extended milling. Both allotropes of LiNH(2)BH(3) exhibit similar thermal decomposition behavior, with 10.8 wt % H(2) released when heated to 180 degrees C; in contrast, LiNH(2)BH(3).NH(3)BH(3) releases approximately 14.3 wt % H(2) under the same conditions.

Liberating Active Metals from Reducible Oxide Encapsulation for Superior Hydrogenation Catalysis.

The strong metal-support interaction (SMSI) is of significant importance to heterogeneous catalysis. The electronic modification and encapsulation of active metals by reducible supports are the intrinsic properties of the SMSI, where the latter would decrease or even cease the catalytic activity of transition metals. Here, we demonstrate for the first time that alkalies are the functional additives that can effectively manipulate the SMSI for better hydrogenation catalysis. Specifically, both thermodynamic analyses and experimental results show that the addition of alkalies to the Ru/TiO2 catalyst could form a titanate top layer that effectively hampers the migration of TiO2-x to the surface of Ru nanoparticles. In the meantime, a substantially enhanced reduction of the support is achieved, leading to an even stronger electron donation from the support to Ru. The alkali-modified Ru/TiO2 exhibits superior low-temperature catalytic activity in the hydrogenation of aromatics, which is ca. an order of magnitude higher than that of the commercial Ru/Al2O3 catalyst and is in clear contrast to that of the neat Ru/TiO2 catalyst that shows negligible activity due to the severe encapsulation of Ru by TiO2-x.

High-capacity hydrogen storage in lithium and sodium amidoboranes.

The safe and efficient storage of hydrogen is widely recognized as one of the key technological challenges in the transition towards a hydrogen-based energy economy. Whereas hydrogen for transportation applications is currently stored using cryogenics or high pressure, there is substantial research and development activity in the use of novel condensed-phase hydride materials. However, the multiple-target criteria accepted as necessary for the successful implementation of such stores have not yet been met by any single material. Ammonia borane, NH3BH3, is one of a number of condensed-phase compounds that have received significant attention because of its reported release of approximately 12 wt% hydrogen at moderate temperatures (approximately 150 degrees C). However, the hydrogen purity suffers from the release of trace quantities of borazine. Here, we report that the related alkali-metal amidoboranes, LiNH2BH3 and NaNH2BH3, release approximately 10.9 wt% and approximately 7.5 wt% hydrogen, respectively, at significantly lower temperatures (approximately 90 degrees C) with no borazine emission. The low-temperature release of a large amount of hydrogen is significant and provides the potential to fulfil many of the principal criteria required for an on-board hydrogen store.

Risk of automated driving: Implications on safety acceptability and productivity.

Autonomous Vehicles have captured the imagination of our society and have promised a future of safe and efficient mobility. However, there is a need to understand behaviour and its consequences in the use of autonomous vehicles. Using paradigms of behavioural and experimental economics, we show that risk attitudes play a role in acceptability of autonomous vehicles, productivity in autonomous vehicles and safety under risk of failures of autonomous systems. We found that risk attitudes and age have a significant impact on these. We believe these findings will help provide guidance to insurance agencies, licensing, vehicle design, and policies around automated vehicles.

Interaction of lithium hydride and ammonia borane in THF.

The two-step reaction between LiH and NH(3)BH(3) in THF leads to the production of more than 14 wt% of hydrogen at 40 degrees C.

Mechanistic investigations on the heterogeneous solid-state reaction of magnesium amides and lithium hydrides.

Isothermal and non-isothermal kinetic measurements on the chemical reaction between Mg(NH2)(2) and LiH, as well as the thermal decomposition of Mg(NH(2))(2), give apparent activation energies of 88.1 and 130 kJ/mol, respectively, which reveal that the thermal decomposition of Mg(NH2)(2) is unlikely to be an elementary step in the chemical reaction of Mg(NH2)(2) and 2LiH. The H-D exchange between H(delta+) in Mg(NH2)(2) and D(delta-) in LiD gives evidence for the coordinated interaction between amide and hydride. The observed linear and nonlinear kinetic growth in the reaction of Mg(NH2)(2)-2LiH indicates that the reaction rate is controlled by the interface reaction in the early stage of the reaction and by mass transport through the imide layer in the later stage. Both particle size and degree of mixing of the reacting species affect the overall kinetics of the reactions.

Hydrogen release from Mg(NH2)2-MgH2 through mechanochemical reaction.

A total of 7.4 wt % of hydrogen was released from the mixture of magnesium amide and magnesium hydride at a molar ratio of 1:2 by mechanical ball milling. Fourier Transform Infrared Spectroscopy (FTIR) and X-ray Diffraction (XRD) characterizations along with the amount of hydrogen released at different stages of ball milling reveal that magnesium imide was first formed in the reaction. The imide then reacted continuously with magnesium hydride and was converted to magnesium nitride and hydrogen. Thermodynamic calculation shows that the hydrogen desorption is a mild endothermic reaction with the standard enthalpy change of about 3.5 kJ/mol of H2.

Electronic promoter or reacting species? The role of LiNH2 on Ru in catalyzing NH3 decomposition.

LiNH2 decomposes to NH3 rather than N2 and H2 because of a severe kinetic barrier in NHx (x = 1, 2) coupling. In the presence of Ru, however, a drastic enhancement in N2 and H2 formation is obtained, which enables the LiNH2-Ru composite to act as a highly active catalyst for NH3 decomposition. Experimental and theoretical investigations indicate that Li creates a NHx-rich environment and Ru mediates the electron transfer facilitating NHx coupling. A strategy in catalytic material design is thus proposed.