A novel magnetic sludge biochar was prepared by making full use of internal iron in sludge combining KMnO4-NaOH modification to enhance the adsorption of Pb (â ¡), Cu (â ¡) and Cd (â ¡).

This study synthesized novel magnetic biochar (PCMN600) by KMnO4-NaOH combined modification using iron-containing pharmaceutical sludge to remove toxic metals from wastewater effectively. Various characterization experiments of engineered biochar showed that the modification process introduced ultrafine MnOx particles on the carbon surface and resulted in higher BET surface area and porosity along with more oxygen-containing surface functional groups. Batch adsorption studies indicated that the maximum adsorption capacities of PCMN600 for Pb2+, Cu2+ and Cd2+ were 181.82 mg/g, 30.03 mg/g and 27.47 mg/g, respectively, at a temperature of 25 °C and pH of 5.0, which were much higher than that of pristine biochar (26.46 mg/g, 6.56 mg/g and 6.40 mg/g). The adsorption datums of three toxic metal ions fitted well to the pseudo-second-order model and Langmuir isotherm, and the sorption mechanisms were identified as electrostatic attraction, ion exchange, surface complexation, cation-π interaction and precipitation. The strong magnetic properties of the engineered biochar endowed the adsorbent with remarkable reusability, and after five cycles of recycling, PCMN600 still retained nearly 80% of its initial adsorption capacities.

Revisiting the Surface Energy Parameters of Standard Test Liquids with a Corrected Contact Angle Method over Rough Surfaces.

Interfacial free energy is a quantitative basis for explaining and predicting interfacial behavior that is ubiquitous in nature. The contact angle (CA) method can determine the surface free energy (γ) as well as Lifshitz-van der Waals (γLW) and Lewis acid/base (γ+/γ-) components of a solid material from its CAs with a set of known test liquids according to the extended Young-Dupré equation. However, the reliability of the "known" parameters of the test liquids is questioned due to the long-neglected surface roughness effect during calibration of the liquids. This study proposed a simple and practicable two-step approach to correct the energy parameters of several test liquids by incorporating Wenzel's surface roughness relationship into CA measurement. Step 1: water and two apolar liquids (diiodomethane and α-bromonaphthalene) were used as benchmarks to calibrate the surface roughness and energy parameters of two reference solids [apolar poly(tetrafluoroethylene) and monopolar poly(methyl methacrylate)], and step 2: the reference solids were used to calibrate any other test liquids by solving the energy parameters from their CAs in the extended Young-Dupré-Wenzel model. Monte Carlo simulation was used to evaluate error transmission and robustness of the model solutions. The obtained energy parameters (γLW/γ+/γ-) of four test liquids (dimethyl sulfoxide, formamide, ethylene glycol, and glycerol) are 28.01/13.68/4.67, 34.95/3.53/37.62, 26.26/7.51/15.74, and 32.99/9.24/26.02 mJ/m2, respectively, and different from the literature values. The liquids were applied to characterize an example solid surface with true γLW/γ+/γ- values of 28.00/1.00/8.00 mJ/m2 and a roughness index (r) of 1.60. Without correction of the liquid parameters, the calculated surface energy, hydration energy, and hydrophobic attraction energy of the solid sample can deviate by 50, 13, and 27%, respectively. This proves the necessity of correcting parameters of the test liquids before they can be used in CA and interfacial energy studies in the presence of surface roughness.

Three-dimensional graphene/amino-functionalized metal-organic framework for simultaneous electrochemical detection of Cd(II), Pb(II), Cu(II), and Hg(II).

Trace detection of multiple toxic heavy metals is a very important and difficult problem, conveniently, sensitively, and reliably. In this work, we developed an innovative electrochemical sensor for simultaneously detected heavy metal ions (Cd2+, Hg2+, Cu2+, and Pb2+). In order to detect trace amounts of Cd(II), Pb(II), Cu(II), and Hg(II) in food quickly, accurately, and at low cost, this study used electrochemical reduction to prepare a screen-printed electrode (3DGO) modified with 3DGO and UiO-66-NH2 composite nanomaterials (UiO-66-NH2/SPCE). The sensing platform is composed of three-dimensional graphene (3DGO), aminated UiO-66 metal-organic framework, named 3DGO/UiO-66-NH2. It is worth noting that the porous structure, amino functional groups on the surface, and large specific surface area of UiO-66-NH2 can enrich and promote the absorption of heavy metal ions. 3DGO was introduced to improve the electrochemical activity and conductivity of UiO-66-NH2 material. The construction of this new sensing platform, which can synchronously, reliably, and sensitively simultaneously detect Cd2+, Pb2+, Cu2+, and Hg2+ only in 150 s in the linear range of 0.01-0.35 pM with the detection limitations, is 10.90 fM, 5.98 fM, 2.89 fM, and 3.1 fM, respectively. This method provides a new strategy that uses MOF materials for electrochemical detection of a variety of heavy metal ions in food.

Comparison of pyrolysis process, various fractions and potential soil applications between sewage sludge-based biochars and lignocellulose-based biochars.

To deeply assess the feasibility of sewage sludge-based biochars for use in soil applications, this review compared sewage sludge-based biochars (SSBBs) with lignocellulose-based biochars (LCBBs) in terms of their pyrolysis processes, various fractions and potential soil applications. Based on the reviewed literature, significant differences between the components of SSBB and LCBB result in different pyrolysis behavior. In terms of the fractions of biochars, obvious differences were confirmed to exist in the carbon content, surface functional groups, types of ash fractions and contents of potential toxic elements (PTEs). However, a clear influence of the feedstock on labile carbon and polycyclic aromatic hydrocarbons (PAHs) was not observed in the current research. These differences determined subsequent discrepancies in the soil application potential and corresponding mechanisms. The major challenges facing biochar application in soils and corresponding recommendations for future research were also addressed. LCBBs promote carbon sequestration, heavy metal retention and organic matter immobilization. The application of SSBBs is a promising approach to improve soil phosphorus fertility, immobilize heavy metals and provide available carbon sources for soil microbes to stimulate microbial biomass. The present review provides guidance information for selecting appropriate types of biochars to address targeted soil issues.

Feasibility of sludge-based biochar for soil remediation: Characteristics and safety performance of heavy metals influenced by pyrolysis temperatures.

Sludge-based biochars (SBB) were prepared to evaluate their physiochemical properties and safety performance for the possible application in soil amendments in this study. SBB were produced at the temperatures ranging from 300 to 900 °C at 200 °C intervals. Both the solid fraction and the soluble organic fraction of SBB were analyzed. The pyrolysis temperature was found to affect the characteristics of solid fraction of the SBB greatly, in terms of the pH, surface area and functional groups. The content and composition of dissolved organic matter in SBB were influenced evidently by pyrolysis temperatures, which was mainly comprised of humic-like compounds with the molecular weight in a range of 0.13-2.4 × 105 kDa. The safety performance of heavy metals in SBB at different temperatures were analyzed: (i) The bioavailable fractions (F1+F2+F3) of heavy metals significantly decreased from 91.65% to 9.44% for Cu, from 98.82% to 63.34% for Zn, from 97.91% to 52.11% for As, from 55.91% to 4.87% for Pb, from 78.20% to 12.50% for Cd, and from 73.51% to 9.57% for Cr when sludge was pyrolyzed to biochars at 900 °C.; (ii) Acid and alkaline conditions promoted the leaching of heavy metals from SBB. The luminescence inhibition of Vibrio fischeri was significantly decreased from 81.41% to 6.01% with the increasing pyrolysis temperatures. Compared with the raw sludge addition, the shoot length, root length and activities of soil microbes in sandy soil and loamy soil with pyrolyzed sludge under different pyrolysis temperatures were increased by 37.5-53.32%, 66.81-96.45%, 92.31-157.69% and 154.74-195.76%, respectively. The biotoxicity tests indicated the relatively safe and reliable performance of SBB. The study provided significant perspectives on the application of SBB as the potential soil amendments.

Effect of silver nanoparticles on an integrated fixed-film activated sludge-sequencing batch reactor: Performance and community structure.

The effects of silver nanoparticles (AgNPs) on reactor performance, extracellular polymeric substances composition and microbial community structure and function in integrated fixed-film activated sludge-sequencing batch reactors (IFAS-SBRs) were investigated. Results showed that the addition of AgNPs from 0.1 to 10 mg/L exhibited no significant effects on nutrient removal. The average overall removal of COD, NH4+-N and PO43--P was 96.6%, 99.9% and 98.8%, respectively. The introduction of AgNPs caused an increase in extracellular polymeric substances content for the sludge and biofilm of IFAS-SBRs. The release of Ag+ from AgNPs and lactate dehydrogenase test implied the low toxicity of AgNPs to IFAS-SBRs. High-throughput sequencing revealed that microbial community structure showed significant shifts at phylum and genus levels after long-term exposure to AgNPs, but core functional groups responsible for nutrient removal remained at high abundance. Bacterial function prediction indicated that the metabolic categories showed no significant shifts under AgNPs stress, therefore good process performance could still be achieved.

Image-guidance technology and the surgical resection of spinal column tumors.

Precision imaging is paramount to achieving success in surgical resection of many spinal tumors, whether the goal involves guiding a surgical cure for primary tumors or improving neurological decompression for metastatic lesions. Pre-operatively, image visualization is intimately involved with defining a clear target and surgical planning. Intra-operatively, image-guidance technology allows for surgeons to maximize the probability for gross total resection of spinal cord tumors and minimize damage to adjacent structures. Through this review, it is evident that spinal surgery has undergone significant advancements with the continued technological progression of different modalities of imaging guided technologies. Sophisticated imaging techniques compliment the surgeon's knowledge by providing an intraoperative reference to spinal column anatomy. This review discusses research efforts focusing on immersive imaging guided interactions with subject specific medical images that could enhance a surgeon's ability to plan and perform complex spinal oncology procedures with safety and efficiency.

Biofouling control by biostimulation of quorum-quenching bacteria in a membrane bioreactor for wastewater treatment.

Bacterial quorum quenching (QQ) has been shown to be effective in controlling biofouling in membrane bioreactors (MBRs) for wastewater treatment. However, the encapsulation of a sufficient level of QQ bacteria is complicated and difficult. In plant research, gamma-caprolactone (GCL), which is structurally similar to the quorum signal, N-acyl homoserine lactone (AHL), was successfully used to specifically stimulate AHL-degrading bacteria (biostimulation) in hydroponic systems to control blackleg and soft rot diseases in potato. In this study, the feasibility of enriching QQ bacteria from activated sludge by GCL was examined, and the effect of biostimulation on biofouling control in MBR treating domestic wastewater was investigated. The results showed that after enrichment with GCL, activated sludge could effectively degrade AHLs, and a QQ gene (qsdA) was augmented. The proposed biostimulation QQ strategy, by introducing and continuously dosing GCL, could significantly increase QQ activity, decrease AHL, control the secretion of extracellular polymeric substances (EPS), and thus, effectively control biofouling in an MBR. This biostimulation QQ strategy provides a more convenient option for biofouling control in MBR applications. Biotechnol. Bioeng. 2016;113: 2624-2632. © 2016 Wiley Periodicals, Inc.

Effect of solid retention time on membrane fouling in membrane bioreactor: from the perspective of quorum sensing and quorum quenching.

Solid retention time (SRT) is one of the most important operational parameters in membrane bioreactor (MBR), which significantly influences membrane fouling. It is widely recognized that SRT mainly changes biomass characteristics, and then, influences membrane fouling. Effect of SRT on quorum sensing (QS) in MBR, which could also influence fouling by coordinating biofilm formation, has not been reported. In this study, fouling, QS, soluble microbial products (SMP), and extracellular polymer substances (EPS) in MBRs operated under SRTs of 4, 10, and 40 days were investigated. The results showed that as SRT increased, the abundance of quorum quenching (QQ) bacteria increased, the quorum signal degradation activity of activated sludge increased, the concentrations of signal molecules in MBR decreased, the excretion of SMP and EPS decreased, and thus membrane biofouling was alleviated. Therefore, besides altering the biomass physiochemical properties, SRT also changed the balance between QS and QQ in MBR, and in this way, influenced membrane biofouling.

Development of sludge-based adsorbents: preparation, characterization, utilization and its feasibility assessment.

The increasing generation of sludge and its subsequent treatment are very sensitive environmental problems. For a more stable and sustainable treatment of sludge, there have been many studies, including the conversion of sludge into sludge-based adsorbents (SBAs) for pollutants removal. In this review, current SBAs preparation conditions and use as adsorbent for contaminant removal in water treatment are summarized and discussed. Carbonization, physical activation and chemical activation are three common preparation methods. The controlling key parameters include pyrolysis temperature, dwell time, heating rate, activator and feedstock type. The efficacy of SBAs in contaminant adsorption depends on their surface area, pore size distribution, surface functional groups and ion-exchange capacity. It has been demonstrated that SBAs can attain high uptakes of dyes and metal ions due to their high cation exchange capacity; whereas the strong antibiotics adsorption performance of SBAs derives from high degree of mesoporosity. In addition, thermal treatment significantly stabilizes heavy metals contained in sludge. The paper also discusses the economic feasibility and environmental safety of preparation and application of SBAs. Further research will include investigations on the migration and transformation of element in sludge by thermal treatment, more economical and efficient chemical activation reagents, obtaining SBAs for designated application, combination of coagulation and SBAs adsorption, regeneration of SBAs and full-scale tests.

Enhanced physicochemical-biological sewage treatment process in cold regions.

Biological treatment processes give relatively poor pollutant removal efficiencies in cold regions because microbial activity is inhibited at low temperatures. We developed an enhanced physicochemical-biological wastewater treatment process that involves micro-membrane filtration, anaerobic biofilter, and aerobic biofilter to improve the pollutant removal efficiencies that can be achieved under cold conditions. Full-scale experiments using the process were carried out in the northeast of China, at outdoor temperatures of around -30 °C. The average removal efficiencies achieved for chemical oxygen demand, total phosphorus, ammonia nitrogen, and suspended solids were 89.8, 92.9, 94.3, and 95.8%, respectively, using a polyaluminium chloride dosage of 50 mg L⁻¹. We concluded that the process is effective to treat sewage in cold regions.

Multilevel investigation of the ecotoxicological effects of sewage sludge biochar on the earthworm Eisenia fetida.

The ecological risks of sewage sludge biochar (SSB) after land use is still not truly reflected. Herein, the ecological risks of SSB prepared at different temperature were investigated using the earthworm E. fetida as a model organism from the perspectives of organismal, tissue, cellular, and molecular level. The findings revealed that the ecological risk associated with low-temperature SSB (SSB300) was more pronounced compared to medium- and high-temperature SSB (SSB500 and SSB700), and the ecological risk intensified with increasing SSB addition rates, as revealed by an increase in the integrated biomarker response v2 (IBRv2) value by 2.59-25.41 compared to those of SSB500 and SSB700. Among them, 10% SSB300 application caused significant oxidative stress and neurotoxicity in earthworms compared to CK (p < 0.001). The weight growth rate and cocoon production rate of earthworms were observed to decrease by 25.06% and 69.29%, respectively, while the mortality rate exhibited a significant increase of 33.34% following a 10% SSB300 application, as compared to the CK. Moreover, 10% SSB300 application also resulted in extensive stratum corneum injury and significant longitudinal muscle damage in earthworms, while also inducing severe collapse of intestinal epithelial cells and disruption of intestinal integrity. In addition, 10% SSB300 caused abnormal expression of earthworm detoxification and cocoon production genes (p < 0.001). These results may improve our understanding of the ecotoxicity of biochar, especially in the long term application, and contribute to providing the guidelines for applying biochar as a soil amendment.

Catalytic pyrolysis of liquor-industry waste: Product and mechanism analysis.

The effects of three catalysts, namely Ni/γ-Al2O3, Fe/γ-Al2O3, and Mg/γ-Al2O3, on the three-phase products of liquor-industry waste pyrolysis were investigated in this study. Results indicated that the catalytic performance of Ni/γ-Al2O3 outperformed those of Fe/γ-Al2O3 and Mg/γ-Al2O3 significantly. The application of Ni/γ-Al2O3 facilitated the reformation of pyrolysis volatiles, leading to increased yields of H2 (174.1 mL/g), CH4 (80.7 mL/g), and CO (88.2 mL/g) by 980.00 %, 133.24 %, and 83.37 %, respectively. compared to catalyst-free conditions. The Ni/γ-Al2O3 also increased the low-level calorific value of biogas by 109.3 % compared to that under non-catalyst conditions. Moreover, Ni/γ-Al2O3 enhanced the relative concentrations of hydrocarbons in tar by 23.15 % while reducing the relative concentrations of O-species by 15.73 % compared to catalyst-free conditions through induced deoxygenation, decarboxylation, decarbonylation reactions as well as efficient steam reforming processes for tar and syngas upgrading purposes. Thus, incorporating Ni/γ-Al2O3 into the pyrolysis process represents a renewable approach for waste-to-energy conversion.

Kill two birds with one stone: The management of hazardous waste and the preparation of efficient adsorbents for Pb(II) were realized by the pyrolysis of penicillin mycelial dreg.

The penicillin industry produces a large amount of penicillin mycelial dreg (PMD), potentially causing severe environmental problems without proper treatment and disposal. To achieve the goals of PMD management, the present work explored the potential of PMD as a novel feedstock to produce biochar with very high adsorption performance. PMD was pyrolyzed at 400-800 °C to prepare biochars (PMD-BCs), and the physical and chemical properties were characterized using various methods. The adsorption capacities of Pb2+ on PMD-BC400, PMD-BC600, and PMD-BC800 were 37.04, 62.89, and 107.53 mg/g, respectively, at a temperature of 25 °C and pH of 5.0. The adsorption process of Pb2+ on PMD-BCs can be well described by the Langmuir model and pseudo-second-order model. Mineral precipitation, ion exchange, functional group complexation and Pb2+-π interaction were involved in the adsorption of Pb2+ on PMD-BCs. Moreover, mineral precipitation and ion exchange dominated Pb2+ sorption on PMD-BCs (84.71-92.73%). This study indicates the transition of PMD to biochar for Pb2+ adsorption is a promising method for PMD utilization.

Synthesis of two nitrogen-doped carbon quantum dots to construct fluorescence probes for sensitive Hg2+ detection with dual signal output.

The rapid and sensitive detection of heavy metal ions is of great importance in food safety and for the environment. Therefore, two novel probes, M-CQDs and P-CQDs, based on carbon quantum dots were utilized to detect Hg2+ based on fluorescence resonance energy transfer and photoinduced electron transfer mechanisms. The M-CQDs were prepared from folic acid and m-phenylenediamine (mPDA) using a hydrothermal method. Similarly, the novel P-CQDs were obtained according to the same synthetic procedure used to create M-CQDs except the mPDA was replaced with p-phenylenediamine (pPDA). Upon the addition of Hg2+ to the M-CQDs probe, the fluorescence intensity reduced significantly with a linear concentration range between 5 and 200 nM. The limit of detection (LOD) was calculated to be 2.15 nM. On the contrary, the fluorescence intensity of the P-CQDs was enhanced greatly after the addition of Hg2+. The Hg2+ detection was realized with a wide linear range from 100 to 5000 nM and the LOD was calculated to be as low as 52.5 nM. The fluorescence "quenching" and "enhancing" effect exhibited by the M-CQDs and P-CQDs, respectively, is due to the different distribution of -NH2 in the mPDA and pPDA precursors. Notably, paper-based chips modified with M/P-CQDs were established for visual Hg2+ sensing, demonstrating the possibility for real-time detection of Hg2+. Moreover, the practicality of this system was confirmed through the successful measurement of Hg2+ in tap water and river water samples.

Spectroscopic fingerprints profiling the polysaccharide/protein/humic architecture of stratified extracellular polymeric substances (EPS) in activated sludge.

Extracellular polymeric substances (EPS), with a stratified structure including tightly-bound EPS (TB-EPS), loosely-bound EPS (LB-EPS), and soluble EPS (S-EPS) surrounding the microbial cells, are known to vitally affect the physicochemical and biological functions of activated sludge in wastewater treatment. Polysaccharides (PS), proteins (PN), and humic acids (HA) are key components of EPS but their roles in constructing the multi-layer architecture are still unclear. This study explored the EPS characteristics in relation to the components using spectroscopic fingerprinting techniques. Ultraviolet-visible (UV-vis) spectra demonstrated stark difference between TB-EPS and other EPS. Fluorescence excitation-emission matrix (FEEM) and apparent quantum yield revealed further detailed differences. Fluorescence quotient analysis highlighted the dominance of TB-EPS, LB-EPS, and S-EPS in the excitation/emission wavelength (Ex/Em) region of Em = 350-400 nm, Em > 400 nm, and low-Stokes shift band (Em - Ex < 25 nm), respectively. Wavelength-wise prediction of the FEEM intensity was achieved through multiple linear regression against the chemical composition and variance partitioning analysis witnessed binary interactions of PS×HA and PS×PN in S-EPS, PN×HA and PS×PN in LB-EPS, and ternary interaction of PS×PN×HA in TB-EPS as well as the wavelength-specific fluorescence responses of these interactions. Further, X-ray photoelectron spectroscopy, infrared spectra, and circular dichroism spectra corroborated the differences in primary, secondary, and tertiary structures across the EPS layers. Ultrahigh-performance liquid chromatography-mass spectrometry detected molecular fragments confirming the multi-component hybridization among PS, PN, and HA. This study demonstrates a spectroscopic approach to sensitively fingerprint the fine structure of EPS, which has the potential for rapid monitoring of EPS and related sludge properties in wastewater treatment systems.

Transformation and stabilization of heavy metals during pyrolysis of organic and inorganic-dominated sewage sludges and their mechanisms.

Improperdisposal of sludge will release heavy metals contained in sludge into soils or waters which could further move through the food chain, posing a risk to human health. Understanding the transformation and stabilization of heavy metals (HMs) during pyrolysis is of great value for safe disposal of sludge. Herein, municipal sewage sludge (MSS, organic-dominated) and pharmacy sludge (PS, inorganic-dominated) were pyrolyzed to investigate the effects of organic and inorganic components and temperature on the stabilization of HMs in sludges. The results showed that pyrolysis can promote the transition of HMs from mobile fractions to stable fractions. Compared to MSS and PS, the potential ecological risk index of biochar derived from MSS and PS decreased by 95.51% and 85.05%, respectively, after pyrolysis at 800 °C. The stabilization of HMs in MSS was mainly due to the complexation reactions between metals and amide functional groups (-CO-NH-) during pyrolysis. Moreover, the mechanism of HMs stabilization in PS lied in the formation of a stable crystal-structure such as copper iron oxide (Cu6Fe3O7) and copper iron phosphate (Cu2Fe5(PO4)6, Cu3Fe4(PO4)6) with iron-containing minerals after high-temperature pyrolysis. The results of this study indicated that the organic and inorganic components of sludge play different roles in the stabilization and transformation of HMs during pyrolysis, which provided a scientific basis for the ecotoxicity reduction of HMs and safe disposal of sludge.

Rapid biodegradation of atrazine by a novel Paenarthrobacter ureafaciens ZY and its effects on soil native microbial community dynamic.

An atrazine-utilizing bacterium, designated as ZY, was isolated from agricultural soil and identified as Paenarthrobacter ureafaciens. The P. ureafaciens ZY demonstrated a significant degradation capacity of atrazine, with the degradation efficiency of 12.5 mg L-1 h-1 in liquid media (at pH 7, 30°C, and the atrazine level of 100 mg L-1). The P. ureafaciens ZY contained three atrazine-degrading genes (i.e., trzN, atzB, and atzC) could metabolize atrazine to form cyanuric acid, which showed lower biotoxicity than the parent atrazine as predicted by Ecological Structure Activity Relationships model. A laboratory-scale pot experiment was performed to examine the degradation of atrazine by P. ureafaciens ZY inoculation and investigate its effects on the native microbial communities. The results exhibited that the P. ureafaciens ZY was conductive to the degradation of atrazine, increased the total soil phospholipid fatty acids at the atrazine level of 50, 70, and 100 mg kg-1. By using high-throughput sequencing analysis, Frateuria, Dyella, Burkholderia-Caballeronia-Paraburkholderia were considered as the most important indigenous atrazine-degrading microorganisms due to their relative abundances were positively correlated with the atrazine degradation rate. In addition, P. ureafaciens ZY also increased the abundance of atrazine-degrading genus Streptomyces and Bacillus, indicating that there may be a synergic relationship between them in the process of atrazine degradation. Our work provides a new insight between inoculums and native microorganisms on the degradation of atrazine.

Role of shear stress in biological aerated filter with nanobubble aeration: Performance, biofilm structure and microbial community.

This study comprehensively investigated the role of shear stress in a biological aerated filter under nanobubble aeration with the operation of an internal reflux and mechanical bubbling, where nanobubbles provide an opportunity to separately assess the effect of the hydraulic shear stress and aeration on the properties of the biofilms. Shear stress optimized the oxygen distribution, which improved the dissolved oxygen of the effluent three- and four-fold through reflux and mechanical bubbling, respectively. Proper shear stress enhanced the spatial development of the biofilms and promoted the activity and stability of nanobubble-aerated biofilms, achieving a sufficient contaminant removal efficiency that meets the local standard. Shear stress and aeration individually regulated the functional pathways and improved the development of the biofilm structure and the performance. The results indicate that nanobubble is a promising aeration technology when accompanied by a shearing strategy.

Preparation of porous biochar based on pharmaceutical sludge activated by NaOH and its application in the adsorption of tetracycline.

In this study, two different kinds of pharmaceutical sludge activated by NaOH were used to prepare biochar. The characteristics of biochar prepared by impregnation method and dry mixing method were analyzed, including N2 adsorption-desorption isotherms, surface functional group analysis and micromorphological observation. The results showed that the biochar prepared by impregnation method had more micropores, while that prepared by dry mixing activation method had more mesopores. The adsorption reaction of tetracycline on the two different kind of biochar was investigated. Several important factors such as solution initial pH, tetracycline concentration and reaction time on adsorption reaction were investigated. The results show that both kinds of biochar have high tetracycline adsorption efficiency and excellent pH adaptability. The biochar manufactured by dry mixing activation method had better adsorption performance (379.78 mg/g, 25 °C). Regeneration experiments showed that the adsorbent had stable performance in absorbing tetracycline. Direct dry mixing activation method is a simple and effective method used to prepare porous biochar, which can be used for the resourceful utilization of pharmaceutical sludge. This work provides extensive information on the use of biochar derived from pharmaceutical sludge for the removal of TC from hospital and pharmaceutical production wastewater.