RESUMO
This study aimed to utilize the nonnegative matrix factorization (NNMF) algorithm for muscle synergy analysis, extracting synergy structures and muscle weightings and mining biomarkers reflecting changes in muscle fatigue from these synergy structures. A leg press exercise to induce fatigue was performed by 11 participants. Surface electromyography (sEMG) data from seven muscles, electrocardiography (ECG) data, Borg CR-10 scale scores, and the z-axis acceleration of the weight block were simultaneously collected. Three indices were derived from the synergy structures: activation phase difference, coactivation area, and coactivation time. The indicators were further validated for single-leg landing. Differences in heart rate (HR) and heart rate variability (HRV) were observed across different fatigue levels, with varying degrees of disparity. The median frequency (MDF) exhibited a consistent decline in the primary working muscle groups. Significant differences were noted in activation phase difference, coactivation area, and coactivation time before and after fatigue onset. Moreover, a significant correlation was found between the activation phase difference and the coactivation area with fatigue intensity. The further application of single-leg landing demonstrated the effectiveness of the coactivation area. These indices can serve as biomarkers reflecting simultaneous alterations in the central nervous system and muscle activity post-exertion.
RESUMO
We report an experimental study of proximity induced superconductivity in planar Josephson junction devices made from free-standing InAs nanosheets. The nanosheets are grown by molecular beam epitaxy, and the Josephson junction devices are fabricated by directly contacting the nanosheets with superconductor Al electrodes. The fabricated devices are explored by low-temperature carrier transport measurements. The measurements show that the devices exhibit a gate-tunable supercurrent, multiple Andreev reflections, and a good quality superconductor-semiconductor interface. The superconducting characteristics of the Josephson junctions are investigated at different magnetic fields and temperatures and are analyzed based on the Bardeen-Cooper-Schrieffer (BCS) theory. The measurements of the ac Josephson effect are also conducted under microwave radiations with different radiation powers and frequencies, and integer Shapiro steps are observed. Our work demonstrates that InAs nanosheet based hybrid devices are desired systems for investigating the forefront of physics, such as two-dimensional topological superconductivity.
RESUMO
We identified the strength cutpoints concerning mobility impairment, then identified the muscle mass cutpoints concerning weakness, and compared the results with other diagnostic criteria to develop the clinical diagnostic criteria associated with functional impairment. In 7583 elderly people, classification and regression tree (CART) and receiver operating characteristic curve (ROC) analyses were used for determining cutpoints for handgrip strength (HGS) and appendicular lean mass (ALM) indices associated with slowness or weakness. Logistic regressions were then used to quantify the strength of the association between muscle mass (or strength) categories and weakness (or slowness). The CART second cutpoints of muscle mass and strength indices were lower than those specified by the ROC method and were between those cutpoints determined by the 20th and Mean-2SD methods. After adjusting for covariates, the associations remained significant in handgrip strength categories defined by the CART and ROC cutpoints and HGS/BMI categories defined by the CART, ROC, and 20th cutpoints in men and women (P < 0.05), ALM, ALM/Ht2 categories defined by all four cutpoints (P < 0.05) and ALM/BMI categories defined by CART and ROC cutpoints in men (P < 0.05), and ALM and ALM/Ht2 categories defined by the CART cutpoints in women (P < 0.05). Our approaches resulted in a definition of weak strength as handgrip strength or HGS/BMI less than 26.55 kg or 1.114 in men and less than 16.45 kg or 0.697 in women and then defined ALM, ALM/Ht2, or ALM/BMI less than 18.92 kg, 7.08 kg/m2, or 0.795 in men and less than 15.04 kg, 5.99 kg/m2, or 0.517 in women as low lean mass.
Assuntos
Força Muscular , Debilidade Muscular , Músculo Esquelético/fisiopatologia , Sarcopenia , Idoso , Composição Corporal , Índice de Massa Corporal , Feminino , Força da Mão , Humanos , Masculino , Limitação da Mobilidade , Debilidade Muscular/diagnóstico , Debilidade Muscular/fisiopatologia , Valores de Referência , Sarcopenia/diagnóstico , Sarcopenia/fisiopatologiaRESUMO
Low-dimensional narrow band gap III-V compound semiconductors, such as InAs and InSb, have attracted much attention as one of promising platforms for studying Majorana zero modes and non-Abelian statistics relevant for topological quantum computation. So far, most of experimental studies were performed on hybrid devices based on one-dimensional semiconductor nanowires. In order to build complex topological circuits toward scalable quantum computing, exploring high-mobility two-dimensional (2D) III-V compound electron system with strong spin-orbit coupling is highly desirable. Here, we study quantum transport in high-mobility InSb nanosheet grown by molecular-beam epitaxy. The observations of Shubnikov-de Hass oscillations and quantum Hall states, together with the angular dependence of magnetotransport measurements, provide the evidence for the 2D nature of electronic states in InSb nanosheet. The presence of strong spin-orbit coupling in the InSb nanosheet is verified by the low-field magnetotransport measurements, characterized by weak antilocalization effect. Finally, we demonstrate the realization of high-quality InSb nanosheet-superconductor junctions with transparent interface. Our results not only advance the study of 2D quantum transport but also open up opportunities for developing hybrid topological devices based on 2D semiconducting nanosheets with strong spin-orbit coupling.
RESUMO
Low-dimensional narrow-band-gap III-V semiconductors are key building blocks for the next generation of high-performance nanoelectronics, nanophotonics, and quantum devices. Realizing these various applications requires an efficient methodology that enables the material dimensional control during the synthesis process and the mass production of these materials with perfect crystallinity, reproducibility, low cost, and outstanding electronic and optoelectronic properties. Although advances in one- and two-dimensional narrow-band-gap III-V semiconductors synthesis, the progress toward reliable methods that can satisfy all of these requirements has been limited. Here, we demonstrate an approach that provides a precise control of the dimension of InAs from one-dimensional nanowires to wafer-scale free-standing two-dimensional nanosheets, which have a high degree of crystallinity and outstanding electrical and optical properties, using molecular-beam epitaxy by controlling catalyst alloy segregation. In our approach, two-dimensional InAs nanosheets can be obtained directly from one-dimensional InAs nanowires by silver-indium alloy segregation, which is much easier than the previously reported methods, such as the traditional buffering technique and select-area epitaxial growth. Detailed transmission electron microscopy investigations provide solid evidence that the catalyst alloy segregation is the origination of the InAs dimensional transformation from one-dimensional nanowires to two-dimensional nanosheets and even to three-dimensional complex crosses. Using this method, we find that the wafer-scale free-standing InAs nanosheets can be grown on various substrates including Si, MgO, sapphire, GaAs, etc. The InAs nanosheets grown at high temperature are pure-phase single crystals and have a high electron mobility and a long time-resolved terahertz kinetics lifetime. Our work will open up a conceptually new and general technology route toward the effective controlling of the dimension of the low-dimensional III-V semiconductors. It may also enable the low-cost fabrication of free-standing nanosheet-based devices on an industrial scale.
RESUMO
We report on experimental detection of the spin-orbit interaction field in an InAs nanowire double quantum dot device. In the spin blockade regime, leakage current through the double quantum dot is measured and is used to extract the effects of spin-orbit interaction and hyperfine interaction on spin state mixing. At finite magnetic fields, the leakage current arising from the hyperfine interaction can be suppressed, and the spin-orbit interaction dominates spin state mixing. We observe dependence of the leakage current on the applied magnetic field direction and determine the direction of the spin-orbit interaction field. We show that the spin-orbit field lies in a direction perpendicular to the nanowire axis but with a pronounced off-substrate-plane angle. The results are expected to have an important implication in employing InAs nanowires to construct spin-orbit qubits and topological quantum devices.
RESUMO
We reported here a selectively additive process to fabricate nanoscale openings of an Si (111) surface from an SiO2 barrier layer. Such nanoscale openings are made for the growth of vertical III-V nanowires. The Si (111) surface protected by a patterned SiNx layer was thermally oxidized, which resulted in a selectively added SiO2 barrier layer. After removing the SiNx, nanoscale openings of the Si (111) surface were exposed for the nanowire growth. Arrays with patterned nanoholes of varied diameters from 60 nm to 334 nm have been used for position-controlled catalyst-free growth of vertical InAs nanowire arrays by metal-organic chemical vapor deposition. Correlations between the nanohole diameter and the diameter, length and growth yield of as-fabricated nanowire arrays have been investigated, showing a repeatable stability. This technique offers an alternative approach for the fabrication of novel III-V nanowire devices using vertical array configuration. A lateral thermal oxidation effect led to a smaller size of the Si opening than that of the SiNx protection nanoislands; therefore, the technique also offers a controllable way to produce nanoholes with an ultra-small diameter.
RESUMO
OBJECTIVE: To tackle non-specific low back pain (NSLBP) among patients and find the most effective solution and to quantitatively synthesize the overall effect of motor control training (MCT) compared with Pilates, McKenzie method, and physical therapy (PT) in pain and physical function. METHODS: Randomized controlled trials (RCTs) of four types of intervention (MCT, Pilates, McKenzie method, and PT) for LBP were collected by searching PubMed, Web of Science, EBSCOhost (Cochrane Central Register of Controlled Trials), and Scopus databases from the establishment of the database to September 30, 2023. The risk of bias was evaluated for included studies using the Revised Cochrane Risk of Bias tool for randomized trials (RoB 2.0). Taking pain and physical function in the experimental and control groups as outcome indicators, subgroup analysis was performed according to the intervention method to calculate the standardized mean difference (SMD) and 95% confidence interval (CI). RESULTS: A total of 25 RCTs, including 1253 patients, were included. Meta-analysis showed that MCT effectively relieved pain [SMD = -0.65, 95% CI (- 1.00, - 0.29), p < 0.01] and improved physical function [SMD = -0.76, 95% CI (- 1.22, - 0.31), p < 0.01] comparing with other 3 types of intervention. Subgroup analysis suggested that MCT could alleviate pain [SMD = -0.92, 95% CI (- 1.34, - 0.50), p < 0.01] and improve physical function [SMD = -1.15, 95% CI (- 1.72, - 0.57), p < 0.01] compared with PT, but it had no statistical significance compared with Pilates [pain: SMD = 0.13, 95% CI (- 0.56, 0.83), p = 0.71; physical function: SMD = 0.10, 95% CI (- 0.72, 0.91), p = 0.81] and the McKenzie method [pain: SMD = -0.03, 95% CI (- 0.75, 0.68), p = 0.93; physical function: SMD = -0.03, 95% CI (- 1.00, 0.94), p = 0.95]. CONCLUSIONS: MCT can effectively relieve pain and improve physical function in patients with NSLBP. It is more effective compared with PT for LBP, while no differences were detected between MCT and Pilates, as well as McKenzie method. Therefore, MCT, Pilates, and the McKenzie method should be encouraged as exercise interventions for NSLBP rehabilitation.
Assuntos
Dor Lombar , Adulto , Humanos , Dor Lombar/terapia , Dor nas Costas , Modalidades de FisioterapiaRESUMO
The chemical bonding at the interface between compound semiconductors and metals is central in determining electronic and optical properties. In this study, new opportunities for controlling this are presented for nanostructures. We investigate Bi adsorption on 2D wurtzite InAs (112Ì0) nanosheets and find that temperature-controlled Bi incorporation in either anionic- or cationic-like bonding is possible in the easily accesible range between room temperature and 400 °C. This separation could not be achieved for ordinary zinc blende InAs(110) surfaces. As the crystal structures of the two surfaces have identical nearest neighbour configurations, this indicates that overall geometric differences can significantly alter the adsorption and incorporation. Ab initio theoretical modelling confirms observed adsorption results, but indicate that both the formation energies as well as kinetic barriers contributes to the observed temperature dependent behaviour. Further, we find that the Bi adsorption rate can differ by at least 2.5 times between the two InAs surfaces while being negligible for standard Si substrates under similar deposition conditions. This, in combination with the observed interface control, provides an excellent opportunity for tuneable Bi integration on 2D InAs nanostructures on standard Si substrates.
RESUMO
SmB6, which opens up an insulating bulk gap due to hybridization between itinerant d-electrons and localized f-electrons below a critical temperature, turns out to be a topological Kondo insulator possessing exotic conducting states on its surface. However, measurement of the surface-states in SmB6 draws controversial conclusions, depending on the growth methods and experimental techniques used. Herein, we report anisotropic magnetoresistance (AMR) observed in the Kondo energy gap of a single SmB6 nanowire that is immune to magnetic dopant pollution and features a square cross-section to show high-symmetry crystal facets. The AMR clearly shows a cosine function of included angle θ between magnetic field and measuring current with a period of π. The positive AMR is interpreted by anisotropically lifting the topological protection of spin-momentum inter-locking surface-states by rotating the in-plane magnetic field, which, therefore, provides the transport evidence that supports the topologically nontrivial nature of the SmB6 surface-states.
RESUMO
BACKGROUND: It is crucial to assess age-related muscle mass changes and derived indices differences in geriatric medicine. We aimed to develop and validate four bioimpedance analysis (BIA) prediction equations against dual-energy X-ray absorptiometry (DEXA) and magnetic resonance image (MRI) in estimating skeletal muscle mass and to compare the differences among skeletal muscle mass indices, cutoff values, and corresponding prevalence rates of low muscle mass for assessing sarcopenia in Chinese adults. METHODS: We measured the height (Ht), weight (Wt), appendicular lean mass (ALM) or skeletal muscle mass (ASM), total lean body mass (LBM) or skeletal muscle mass (TSM) obtained using DEXA or MRI, and a multi-frequency BIA (BCA II;50, 250 kHz), in 371 adults aged 18.0-87.0 years. We also collected gender, age, Ht, Wt, and impedance indexes (Ht2/R50, Ht2/R250, R50/Ht2, R250/Ht2) from 30,500 adults aged 18-96 years living in China. Multiple regression analyses were used to derive four prediction equations by BIA, and double cross-validation techniques and Bland-Altman analyses were used to test agreement. Various muscle mass indices and prevalence rates were depicted by line plots in regard to age trends. RESULTS: Satisfactory results were found in the four prediction models as they had the larger R2 (0.833-0.930) values and low SEE (1.409-2.335 kg) values. The predictive variables included impedance indexes (Ht2/R50, R50/Ht2, R250/Ht2), gender, age, Wt, and Ht. The corresponding prevalence rates of low muscle mass exhibited significant differences according to the various muscle mass indices adjusted for Ht, Wt, or body mass index (BMI), in addition to the cutoff values based on two standard deviations (2SD) of young people or the lower 20% of the study group. CONCLUSIONS: The BIA equations have the potential to be applied as a practical method of quantifying skeletal muscle mass in Chinese adults. However, the operational methods that are most appropriate for determining the degree of low muscle mass that actually contributes to sarcopenia remains inconclusive.
Assuntos
Composição Corporal , Músculo Esquelético/anatomia & histologia , Sarcopenia/epidemiologia , Adolescente , Adulto , Idoso , Idoso de 80 Anos ou mais , Envelhecimento , Índice de Massa Corporal , Impedância Elétrica , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Músculo Esquelético/fisiologia , Prevalência , Sarcopenia/diagnóstico , Adulto JovemRESUMO
The limit of dynamic endurance during repetitive contractions has been referred to as the point of muscle fatigue, which can be measured by mechanical and electrophysiological parameters combined with subjective estimates of load tolerance for revealing the human real-world capacity required to work continuously. In this study, an isotonic muscular endurance (IME) testing protocol under a psychophysiological fatigue criterion was developed for measuring the retentive capacity of the power output of lower limb muscles. Additionally, to guide the development of electrophysiological evaluation methods, linear and non-linear techniques for creating surface electromyography (sEMG) models were compared in terms of their ability to estimate muscle fatigue. Forty healthy college-aged males performed three trials of an isometric peak torque test and one trial of an IME test for the plantar flexors and knee and hip extensors. Meanwhile, sEMG activity was recorded from the medial gastrocnemius, lateral gastrocnemius, vastus medialis, rectus femoris, vastus lateralis, gluteus maximus, and biceps femoris of the right leg muscles. Linear techniques (amplitude-based parameters, spectral parameters, and instantaneous frequency parameters) and non-linear techniques (a multi-layer perception neural network) were used to predict the time-dependent power output during dynamic contractions. Two mechanical manifestations of muscle fatigue were observed in the IME tests, including power output reduction between the beginning and end of the test and time-dependent progressive power loss. Compared with linear mapping (linear regression) alone or a combination of sEMG variables, non-linear mapping of power loss during dynamic contractions showed significantly higher signal-to-noise ratios and correlation coefficients between the actual and estimated power output. Muscular endurance required in real-world activities can be measured by considering the amount of work produced or the activity duration via the recommended IME testing protocol under a psychophysiological termination criterion. Non-linear mapping techniques provide more powerful mapping of power loss compared with linear mapping in the IME testing protocol.
Assuntos
Quadril/fisiologia , Articulação do Joelho/fisiologia , Joelho/fisiologia , Perna (Membro)/fisiologia , Contração Muscular/fisiologia , Fadiga Muscular/fisiologia , Músculo Esquelético/fisiologia , Resistência Física/fisiologia , Fenômenos Biomecânicos/fisiologia , Eletromiografia/métodos , Fenômenos Eletrofisiológicos/fisiologia , Voluntários Saudáveis , Humanos , Masculino , Torque , Adulto JovemRESUMO
METHODS: circRNA expression was analysed in six cerebrospinal fluid (CSF) samples from three patients of the infectious and noninfectious phases using an Arraystar Human circRNA Array. Differentially altered circRNAs were validated by quantitative real-time polymerase chain reaction (qRT-PCR) in the 66 CSF samples of 33 patients of the infectious and noninfectious phases. t-test was used for statistical analysis. A bioinformatics analysis was employed to investigate the function mechanism of the circRNAs. RESULTS: Firstly, 142 circRNAs were found significantly different in 6 CSF samples of the infection and noninfection phases of 3 patients. Fourteen circRNAs with the top largest fold changes were chosen from the 142 circRNAs for PCR validation in the same 6 CSF samples of 3 patients. Three circRNAs were selected to be validated in 60 CSF samples of 30 patients using the PCR test. In infection CSF, an upregulated hsa_circRNA_402632 and downregulated hsa_circRNA_008636 and hsa_circRNA_405481 were confirmed by PCR test. A bioinformatics analysis was used to investigate the function mechanism of the 3 circRNAs. hsa_circRNA_402632 is enriched in the insulin resistance pathway, the FoxO and AMPK signaling pathways are the most important pathways for hsa_circRNA_008636 gene expression, and hsa_circRNA_405481 is enriched in the endometrial cancer signaling pathway, Fc epsilon RI signaling pathway, and TGF-beta signaling pathway. CONCLUSIONS: hsa_circRNA_402632, hsa_circRNA_008636, and hsa_circRNA_405481 may be potential diagnostic markers for central nervous system infection after neurological surgery.
Assuntos
Sistema Nervoso Central/metabolismo , Regulação da Expressão Gênica , Infecções , RNA Circular/genética , RNA Circular/metabolismo , Adulto , Idoso , Idoso de 80 Anos ou mais , Biomarcadores , Sistema Nervoso Central/cirurgia , Biologia Computacional , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , RNA Circular/líquido cefalorraquidiano , Reação em Cadeia da Polimerase em Tempo Real , Transdução de Sinais/genéticaRESUMO
A variety of infrared applications rely on semiconductor superlattices, including, notably, the realization of high-power, compact quantum cascade lasers. Requirements for atomically smooth interface and limited lattice matching options set high technical standards for fabricating applicable heterostructure devices. The semiconductor twinning superlattice (TSL) forms in a single compound with periodically spaced twin boundaries and sharp interface junctions and can be grown with convenient synthesis methods. Therefore, employing semiconductor TSL may facilitate the development of optoelectronic applications related to superlattice structures. Here, it is shown that InAs TSL nanowires generate inter-sub-band transition channels due to the band projection and the Bragg-like electron reflection. The findings reveal the physical mechanisms of inter-sub-band transitions in TSL structure and suggest that TSL structures are promising candidates for mid-infrared optoelectronic applications.
RESUMO
SmB6 nanowires, as a prototype of nanostructured topological Kondo insulator, have shown rich novel physical phenomena relating to their surface. Catalyst-assisted chemical vapor deposition (CVD) is a common approach to prepare SmB6 nanowires and Ni is the most popular catalyst used to initiate the growth of SmB6 nanowires. Here, we study the effect of growth mechanism on the surface of SmB6 nanowires synthesized by CVD. Two types of SmB6 nanowires are obtained when using Ni as the catalyst. In addition to pure SmB6 nanowires without Ni impurity, a small amount of Ni is detected on the surface of some SmB6 nanowires by element analysis with transmission electron microscopy. In order to eliminate the possible distribution of Ni on nanowire surface, we synthesize single crystalline SmB6 nanowires by CVD without using catalyst. The difference between catalyst-assisted and catalyst-free growth mechanism is discussed.
RESUMO
Quantum confined devices of 3D topological insulators are proposed to be promising and of great importance for studies of confined topological states and for applications in low-energy-dissipative spintronics and quantum information processing. The absence of energy gap on the topological insulator surface limits the experimental realization of a quantum confined system in 3D topological insulators. Here, the successful realization of single-electron transistor devices in Bi2 Te3 nanoplates using state-of-the-art nanofabrication techniques is reported. Each device consists of a confined central island, two narrow constrictions that connect the central island to the source and drain, and surrounding gates. Low-temperature transport measurements demonstrate that the two narrow constrictions function as tunneling junctions and the device shows well-defined Coulomb current oscillations and Coulomb-diamond-shaped charge-stability diagrams. This work provides a controllable and reproducible way to form quantum confined systems in 3D topological insulators, which should greatly stimulate research toward confined topological states, low-energy-dissipative devices, and quantum information processing.
RESUMO
Cooper pair splitting (CPS) can induce nonlocal correlation between two normal conductors that are coupled to a superconductor. CPS in a double one-dimensional electron gas is an appropriate platform for extracting a large number of entangled electron pairs and is one of the key ingredients for engineering Majorana fermions with no magnetic field. In this study, we investigated CPS by using a Josephson junction of a gate-tunable ballistic InAs double nanowire. The measured switching current into the two nanowires is significantly larger than the sum of the switching current into the respective nanowires, indicating that interwire superconductivity is dominant compared with intrawire superconductivity. From its dependence on the number of propagating channels in the nanowires, the observed CPS is assigned to one-dimensional electron-electron interaction. Our results will pave the way for the utilization of one-dimensional electron-electron interaction to reveal the physics of high-efficiency CPS and to engineer Majorana fermions in double nanowire systems via CPS.
RESUMO
Contamination is a major concern in surface and interface technologies. Given that graphene is a 2D monolayer material with an extremely large surface area, surface contamination may seriously degrade its intrinsic properties and strongly hinder its applicability in surface and interfacial regions. However, large-scale and facile treatment methods for producing clean graphene films that preserve its excellent properties have not yet been achieved. Herein, an efficient postgrowth treatment method for selectively removing surface contamination to achieve a large-area superclean graphene surface is reported. The as-obtained superclean graphene, with surface cleanness exceeding 99%, can be transferred to dielectric substrates with significantly reduced polymer residues, yielding ultrahigh carrier mobility of 500 000 cm2 V-1 s-1 and low contact resistance of 118 Ω µm. The successful removal of contamination is enabled by the strong adhesive force of the activated-carbon-based lint roller on graphene contaminants.
RESUMO
Muscle strength and function declined more than the concomitant loss of muscle mass. Measures of muscle strength and function are an effective way to assess functional ability and physical health in older people. A healthy lifestyle such as physical exercise, good nutrition, and higher BMI can benefit older people. INTRODUCTION: The study investigated the characteristics of aging-related differences in appendicular lean mass (ALM/Ht2), handgrip strength (HGS), usual gait speed (UGS), repeated chair stands (RCS), Timed Up and Go (TUG) test, and their associated factors in 6703 rural residents. METHODS: We assessed their anthropometry, body composition, muscle strength and function, bone mineral density, blood pressure, and blood biochemical indices via clinical examination or laboratory tests and investigated demographic characteristics, lifestyle, medical history, physical activity, and dietary intake via questionnaire. Stepwise logistic regression was used to determine the associated factors of low muscle mass, weak muscle strength, reduced physical performance, and sarcopenia. RESULTS: The mean values of muscle strength and function decreased more rapidly with age than the mean values of muscle mass, especially in females. The prevalence of low ALM/Ht2, weak HGS, slow UGS, long RCS, long TUG, and sarcopenia increased (P < 0.01). Higher body mass index (BMI) and daytime sleep were associated with high ALM/Ht2. Comorbidity factors such as hypertension, bone mineral density loss, central adiposity, metabolic syndrome, and tumors were associated with the risk of weak muscle strength and reduced physical performance, while physical activity and better nutrition were associated with better muscle strength and physical performance. CONCLUSIONS: At the higher decades of life, the decline of muscle strength and function is greater than the loss in muscle mass. Measures of muscle strength and function are an effective way to assess functional ability and physical health in older people. Maintaining a healthy lifestyle by means such as physical exercise, good nutrition, and higher BMI throughout the course of life may be benefit older people by improving their muscle mass, strength, and function.
Assuntos
Força Muscular/fisiologia , Desempenho Físico Funcional , Sarcopenia/etiologia , Sarcopenia/fisiopatologia , Absorciometria de Fóton , Idoso , Idoso de 80 Anos ou mais , Antropometria , Composição Corporal , Índice de Massa Corporal , Densidade Óssea/fisiologia , China/epidemiologia , Estudos Transversais , Exercício Físico , Feminino , Força da Mão/fisiologia , Humanos , Estilo de Vida , Masculino , Pessoa de Meia-Idade , Estado Nutricional , População Rural/estatística & dados numéricos , Sarcopenia/epidemiologia , Inquéritos e Questionários , Velocidade de CaminhadaRESUMO
Quantum Griffiths singularity was theoretically proposed to interpret the phenomenon of divergent dynamical exponent in quantum phase transitions. It has been discovered experimentally in three-dimensional (3D) magnetic metal systems and two-dimensional (2D) superconductors. But, whether this state exists in lower dimensional systems remains elusive. Here, we report the signature of quantum Griffiths singularity state in quasi-one-dimensional (1D) Ta2PdS5 nanowires. The superconducting critical field shows a strong anisotropic behavior and a violation of the Pauli limit in a parallel magnetic field configuration. Current-voltage measurements exhibit hysteresis loops and a series of multiple voltage steps in transition to the normal state, indicating a quasi-1D nature of the superconductivity. Surprisingly, the nanowire undergoes a superconductor-metal transition when the magnetic field increases. Upon approaching the zero-temperature quantum critical point, the system uncovers the signature of the quantum Griffiths singularity state arising from enhanced quenched disorders, where the dynamical critical exponent becomes diverging rather than being constant.