The effect of silica thickness on nano TiO2 particles for functional polyurethane nanocomposites.

In order to help reduce the agglomeration of TiO2 nanoparticles in polyurethane coatings while enhancing their photoactivity and mechanical/physical properties, this work examined encapsulating TiO2 nanoparticles in a thin layer of SiO2, prior to their nanocomposite polymerization. By applying a Stöber process, varying thicknesses of SiO2 were successfully coated onto the surface of anatase and rutile TiO2 nanoparticles. The methylene blue results showed that different loadings of SiO2 onto the TiO2 surface significantly influenced their photocatalytic activity. When the loading weight of SiO2 was lower than 3.25 wt%, the photocatalytic activity was enhanced, while with higher loadings, it gave lower photocatalytic activity. When the rutile phase TiO2 surface was fully covered with SiO2, an enhanced photocatalytic activity was observed. When these silica coated nanoparticles were applied in polyurethane coatings, increasing the amount of SiO2 on the titania surface increased the coatings contact angle from 75° to 87° for anatase phase and 70°-78° for rutile phase. The Young's modulus was also increased from 1.06 GPa to 2.77 GMPa for anatase phase and 1.06-2.17 GPa for rutile phase, attributed to the silica layer giving better integration. The thermal conductivity of the polyurethane coatings was also successfully decreased by encapsulating SiO2 on the titania surface for next generation high performance coatings.

Quantum dots/silica/polymer nanocomposite films with high visible light transmission and UV shielding properties.

The dispersion of light-absorbing inorganic nanomaterials in transparent plastics such as poly(ethylene-co-vinyl acetate) (PEVA) is of enormous current interest in emerging solar materials, including photovoltaic (PV) modules and commercial greenhouse films. Nanocrystalline semiconductor or quantum dots (QDs) have the potential to absorb UV light and selectively emit visible light, which can control plant growth in greenhouses or enhance PV panel efficiencies. This work provides a new and simple approach for loading mesoporous silica-encapsulated QDs into PEVA. Highly luminescent CdS and CdS-ZnS core-shell QDs with 5 nm size were synthesized using a modified facile approach based on pyrolysis of the single-molecule precursors and capping the CdS QDs with a thin layer of ZnS. To make both the bare and core-shell structure QDs more resistant against photochemical reactions, a mesoporous silica layer was grown on the QDs through a reverse microemulsion technique based on hydrophobic interactions. By careful experimental tuning, this encapsulation technique enhanced the quantum yield (∼65%) and photostability compared to the bare QDs. Both the encapsulated bare and core-shell QDs were then melt-mixed with EVA pellets using a mini twin-screw extruder and pressed into thin films with controlled thickness. The results demonstrated for the first time that mesoporous silica not only enhanced the quantum yield and photostability of the QDs but also improved the compatibility and dispersibility of QDs throughout the PEVA films. The novel light selective films show high visible light transmission (∼90%) and decreased UV transmission (∼75%).

Isolation and immunosuppressive effects of 6″-O-acetylginsenoside Rb1 extracted from North American ginseng.

Extraction of medicinally active components from natural health products has become an emerging source for drug discovery. Of particular interest for this work was the finding and testing of a new ginsenoside from North American ginseng (Panax quinquefolius). In the present study, a large amount of 6″-O-acetylginsenoside Rb1, compound 7, was found using ultrasonic extraction of North American ginseng with DMSO aqueous solution. This new ginsenoside was well identified with MS, FTIR, and 1D (1H and 13C) and 2D (gCOSY, gHSQC, and gHMBC) NMR. Subsequent bioassay experiments confirmed that compound 7 demonstrated an additional immunosuppressive activity towards inhibiting the production of nitric oxide and tumor necrosis factor alpha in lipopolysaccharide-induced macrophage cells in a dose-dependent manner using murine macrophages. This new ginsenoside is encouraging for the further exploration and development of novel drugs.

Enhanced Photocatalytic Properties of All-Organic IDT-COOH/O-CN S-Scheme Heterojunctions Through π-π Interaction and Internal Electric Field.

Herein, we present a distinct methodology for the in situ electrostatic assembly method for synthesizing a conjugated (IDT-COOH)/oxygen-doped g-C3N4 (O-CN) S-scheme heterojunction. The electron delocalization effect due to π-π interactions between O-CN and self-assembled IDT-COOH favors interfacial charge separation. The self-assembled IDT-COOH/O-CN exhibits a broadened visible absorption to generate more charge carriers. The internal electric field between the IDT-COOH and the O-CN interface provides a directional charge-transfer channel to increase the utilization of photoinduced charge carriers. Moreover, the active species (•O2-, h+, and 1O2) produced by IDT-COOH/O-CN under visible light play important roles in photocatalytic disinfection. The optimum 40% IDT-COOH/O-CN can kill 7-log of methicillin-resistant Staphylococcus aureus (MRSA) cells in 2 h and remove 88% tetracycline (TC) in 5 h, while O-CN only inactivates 1-log of MRSA cells and degrades 40% TC. This work contributes to a promising method to fabricate all-organic g-C3N4-based S-scheme heterojunction photocatalysts with a wide range of optical responses and enhanced exciton dissociation.

Honeycomb films of cellulose azide: molecular structure and formation of porous films.

Development of value-added micropatterned porous materials from naturally abundant polymers, such as cellulose, are of growing interest. In this paper, regioselectively modified amphiphilic cellulose azide, 3-O-azidopropoxypoly(ethylene glycol)-2,6-di-O-thexyldimethylsilyl cellulose, with different degrees of substitution (DS) and degrees of polymerization (DP) of the poly(ethylene glycol) (PEG) side chain, was synthesized and employed in the formation of honeycomb-patterned films. With the variation of the DP and/or DS, the amphiphilicity of the polymer and the pore size of the formed films changed accordingly. It was found that amphiphilicity of the cellulose azide played a significant role in the formation of honeycomb films. Balanced amphiphilicity was of particular importance in the formation of uniform honeycomb films. Via the Cu(I)-catalyzed alkyne-azide [2 + 3] cycloaddition reaction, fluorescent avidin and quantum dots were attached to the films. By means of confocal microscopy, it was confirmed that the functional azido group was preferentially allocated inside the pores. This provides a platform for the development of advanced honeycomb materials with site-specific functionalities, such as biosensors.

Design of functionalized cellulosic honeycomb films: site-specific biomolecule modification via "click chemistry".

Value-added materials from naturally abundant polymers such as cellulose are of significant importance. In particular, cellulosic open-framework structures with controlled chemical functionality of the internal surface have great potential in many biosensor applications. Although various cellulose derivatives can form porous honeycomb structured materials, solubility issues and problems with film formation exist. To address this, we have generated robust cellulosic open-framework structures that can be post-functionalized through site-specific modification. Regioselectively modified amphiphilic cellulose azides, 3-O-azidopropoxypoly(ethylene glycol)-2,6-di-O-thexyldimethylsilyl cellulosics, were synthesized, and honeycomb-patterned films were readily produced by the simple breath figures method. Changing the degree of polymerization (DP) of the pendent ethylene glycol (EG(DP)) groups from 22 to 4 increased the corresponding honeycomb film pore diameters from ~1.2 to ~2.6 µm, enabling the potential tuning of pore size. Moreover, these novel azido-functionalized honeycomb films were easily functionalized using Cu(I)-catalyzed alkyne-azide [2 + 3] cycloaddition reaction; biotin was "clicked" onto the azide functionalized cellulosic honeycomb films without any effect to the film structure. These results indicate this system may serve as a platform for the design and development of biosensors.

CdS and CdTeS quantum dot decorated TiO2 nanowires. Synthesis and photoefficiency.

An easy process was developed to synthesize TiO(2) nanowires sensitized with CdS and CdTeS quantum dots (QDs) requiring no pretreatment of the TiO(2) nanowires prior to nanoparticle generation. CdS and CdTeS nanoparticles were firstly grown by an in situ colloidal method directly onto the TiO(2) surface, hence not requiring subsequent functionalization of the QDs. The resulting nanostructure assembly and composition was confirmed by transmission electron microscopy (TEM), x-ray photoelectron spectroscopy (XPS) and Raman spectroscopy. Successful decoration of the TiO(2) nanowires by the QDs was observed by TEM, while XPS spectra provided clear evidence for the coexistence of CdS and CdTeS QDs and TiO(2) nanowires. The electronic structure of the TiO(2) nanowires was preserved as indicated by Raman spectroscopy. Preliminary photocurrent measurements showed that inclusion of Te in CdS QDs improved the photocurrent efficiency. Compared to bare TiO(2) nanowires, CdS/TiO(2) nanoassemblies showed an enhancement in photocurrent efficiency of 300% while CdTeS/TiO(2) presented an improvement of 350%. This study indicates that the generation of strongly anchored CdS and CdTeS QDs on a TiO(2) nanowire surface is achievable without introduction of a linker molecule, whose presence is known to decrease the electron injection efficiency.

Continuous Hydrothermal Decarboxylation of Fatty Acids and Their Derivatives into Liquid Hydrocarbons Using Mo/Al2O3 Catalyst.

In this study, we report a single-step continuous production of straight-chain liquid hydrocarbons from oleic acid and other fatty acid derivatives of interest including castor oil, frying oil, and palm oil using Mo, MgO, and Ni on Al2O3 as catalysts in subcritical water. Straight-chain hydrocarbons were obtained via decarboxylation and hydrogenation reactions with no added hydrogen. Mo/Al2O3 catalyst was found to exhibit a higher degree of decarboxylation (92%) and liquid yield (71%) compared to the other two examined catalysts (MgO/Al2O3, Ni/Al2O3) at the maximized conditions of 375 °C, 4 h of space time, and a volume ratio of 5:1 of water to oleic acid. The obtained liquid product has a similar density (0.85 kg/m3 at 15.6 °C) and high heating value (44.7 MJ/kg) as commercial fuels including kerosene (0.78-0.82 kg/m3 and 46.2 MJ/kg), jet fuel (0.78-0.84 kg/m3 and 43.5 MJ/kg), and diesel fuel (0.80-0.96 kg/m3 and 44.8 MJ/kg). The reaction conditions including temperature, volume ratio of water-to-feed, and space time were maximized for the Mo/Al2O3 catalyst. Characterization of the spent catalysts showed that a significant amount of amorphous carbon deposited on the catalyst could be removed by simple carbon burning in air with the catalyst recycled and reused.

Tuning the Optical Properties of Silicon Quantum Dots via Surface Functionalization with Conjugated Aromatic Fluorophores.

Silicon Quantum Dots (SQDs) have recently attracted great interest due to their excellent optical properties, low cytotoxicity, and ease of surface modification. The size of SQDs and type of ligand on their surface has a great influence on their optical properties which is still poorly understood. Here we report the synthesis and spectroscopic studies of three families of unreported SQDs functionalized by covalently linking to the aromatic fluorophores, 9-vinylphenanthrene, 1-vinylpyrene, and 3-vinylperylene. The results showed that the prepared functionalized SQDs had a highly-controlled diameter by HR-TEM, ranging from 1.7-2.1 nm. The photophysical measurements of the assemblies provided clear evidence for efficient energy transfer from the fluorophore to the SQD core. FÓ§rster energy transfer is the likely mechanism in these assemblies. As a result of the photogenerated energy transfer process, the emission color of the SQD core could be efficiently tuned and its emission quantum efficiency enhanced. To demonstrate the potential application of the synthesized SQDs for bioimaging of cancer cells, the water-soluble perylene- and pyrene-capped SQDs were examined for fluorescent imaging of HeLa cells. The SQDs were shown to be of low cytotoxicity.

Syntheses, crystal structures, adsorption properties and visible photocatalytic activities of highly stable Pb-based coordination polymers constructed by 2-(2-carboxyphenyl)imidazo(4,5-f)-(1,10)phenanthroline and bridging linkers.

Five highly stable coordination polymers assembled by 2-(2-carboxyphenyl)imidazo(4,5-f)-(1,10)phenanthroline (2-HNCP) and different aromatic carboxylic acid ligands, namely, [Pb(2-NCP)(L1)]n (1), [Pb2(2-NCP)2(L2)]n·2nH2O (2), [Pb2(2-NCP)2(L2)]n (3), [Pb(2-NCP)(L3)0.5]n (4) and [Pb2(2-NCP)2(L4)]n (5), where HL1 = pyridine-4-carboxylic acid, H2L2 = 2-amino-1,4-benzenedicarboxylic acid, H2L3 = 1,4-benzenedicarboxylic acid and H2L4 = 2-hydroxy-1,4-benzenedicarboxylic acid, have been synthesized under hydrothermal conditions. Their structures have been determined by single crystal X-ray diffraction analyses and further characterized by elemental analyses and infrared spectroscopy. In 1, adjacent ladder-like chains are extended into a three-dimensional (3D) supramolecular architecture by π-π interactions. In 2, the neighboring layers are interconnected by π-π interactions to afford a 3D supramolecular architecture. 3-5 exhibit similar 3D frameworks with a Schläfli symbol of 412·63 topologies. The different auxiliary ligands and the pH value of the reaction system were discussed in regard to the formation of different structures. In addition, these five complexes present high thermal stabilities, the preferential adsorption of CO2 over N2 and excellent photocatalytic activities for dye degradation under visible light irradiation.

Angiogenic Rg1 /Sr-Doped TiO2 Nanowire/Poly(Propylene Fumarate) Bone Cement Composites.

A new approach is provided for preparing radiopaque and angiogenic poly(propylene fumarate) (PPF) bone cements by integrating Sr-doped n-TiO2 nanowires and ginsenoside Rg1 suitable for treating osteonecrosis. High aspect ratio radiopaque TiO2 -nanowires are synthesized by strontium doping in supercritical CO2 for the first time, showing a new phase, SrTiO3 . PPF is synthesized using a transesterification method by reacting diethyl fumarate and propylene glycol, then functionalized using maleic anhydride to produce terminal carboxyl groups, which are subsequently linked to the nanowires. The strong interfacial adhesion between functionalized PPF and nanowires is examined by scanning electron microscopy, Fourier transform infrared, X-ray photoelectron spectroscopy, thermal analysis, and mechanical testing. An angiogenic modulator, ginsenoside Rg1 , is integrated into the bone cement formulation with the mechanical properties, radiopacity, drug release, and angiogenesis behavior of the formed composites explored. The results show superior radiopacity and excellent release of ginsenoside Rg1 in vitro, as well as a dose-dependent increase in the branching point numbers. The present study suggests this new methodology provides sufficient mechanical properties, radiopacity, and angiogenic activity to be suitable for cementation of necrotic bone.

Microfluidic Synthesis and Angiogenic Activity of Ginsenoside Rg1-Loaded PPF Microspheres.

Next generation drug-loaded polymer scaffolds for hard tissue engineering require unique structures to enhance release kinetics while enabling bone cell growth (osteogenesis). This study examined the encapsulation of the pro-angiogenic mediator, ginsenoside Rg1, into biodegradable poly(propylene fumarate) (PPF) microspheres to facilitate osteogenesis, while examining the release mechanism using advanced X-ray absorption near edge structure spectroscopy (XANES). Ginsenoside Rg1-loaded PPF microspheres were prepared using both an emulsion method and a microfluidic device, with the microfluidic technique providing tunable unimodal PPF spheres ranging in size from 3 to 52 µm by varying the flow rates. The morphology and composition of the Rg1-loaded PPF microspheres were characterized using FTIR, XRD, and XANES to examine the distribution of ginsenoside Rg1 throughout the polymer matrix. Encapsulation efficiency and release profiles were studied and quantified by UV-Vis spectrophotometry, showing high encapsulation efficiencies of 95.4 ± 0.8% from the microfluidic approach. Kinetic analysis showed that Rg1 release from the more monodisperse PPF microspheres was slower with a significantly smaller burst effect than from the polydisperse spheres, with the release following Fickian diffusion. The released Rg1 maintained its angiogenic effect in vitro, showing that the PPF microspheres are promising to serve as vehicles for long-term controlled drug delivery leading to therapeutic angiogenesis in bone tissue engineering strategies.

Honeycomb membranes prepared from 3-O-amino acid functionalized cellulose derivatives.

The development of value-added wood-derived polymer products is of significant importance. Of particular interest is the synthesis of advanced bioactive cellulosic materials. In the present research, novel cellulosic honeycomb films are reported. Cellulose was reacted with dimethylthexylsilyl chloride to form regioselective 2,6-di-O-thexyldimethylsilyl cellulose followed by substitution of the C3 with functionalized poly(ethylene glycol) (PEG). The free end of the PEG side chains of the regioselective 3-O-poly(ethylene glycol)-2,6-di-O-thexyldimethylsilyl cellulose served as an attachment point for bioactive molecules. As an example, Fmoc-Gly-OH was linked to the free end of PEG to produce 3-O-Fmoc-Gly-poly(ethylene glycol)-2,6-di-O-thexyldimethylsilyl cellulose. Honeycomb films were produced through film casting under a humid airflow. AFM analysis revealed the directed self-assembly of the 3-O-Fmoc-Gly-poly(ethylene glycol)-2,6-di-O-thexyldimethylsilyl cellulose wherein the pendent 3-O-Fmoc-Gly-poly(ethylene glycol) groups allocated preferentially around the edges of the honeycomb pores.

Synthesis and characterization of novel TiO2-poly(propylene fumarate) nanocomposites for bone cementation.

This work reports on a new methodology for synthesizing poly(propylene fumarate) (PPF)/titania nanowire composites which would be beneficial in tissue engineering for orthopaedic bone cements. The synthetic procedure reacted PPF with maleic anhydride to create HOOC-PPF-COOH species in a ring-opening reaction at room temperature. These species were then coordinated to titania nanowires by metal carboxylate bonding through the end -COOH groups. These PPF-grafted nano-TiO2 assemblies were then further polymerized and crosslinked in the presence of N-vinylpyrrolidone to produce the bone cements. The synthesis and modification of PPF was confirmed by NMR (1H and 13C) and XPS, while the reaction chemistry of the functionalized PPF and nano-TiO2 was also investigated by XPS and FTIR. Mechanical testing of the resulting composites demonstrated a significant reinforcement of the tensile and flexural properties, showing the utility of this synthetic approach for bone tissue engineering.

Hydroxyapatite-TiO(2)-based nanocomposites synthesized in supercritical CO(2) for bone tissue engineering: physical and mechanical properties.

Calcium phosphate-based nanocomposites offer a unique solution toward producing scaffolds for orthopedic and dental implants. However, despite attractive bioactivity and biocompatibility, hydroxyapatite (HAp) has been limited in heavy load-bearing applications due to its intrinsically low mechanical strength. In this work, to improve the mechanical properties of HAp, we grew HAp nanoplates from the surface of one-dimensional titania nanorod structures by combining a coprecipitation and sol-gel methodology using supercritical fluid processing with carbon dioxide (scCO2). The effects of metal alkoxide concentration (1.1-1.5 mol/L), reaction temperature (60-80 °C), and pressure (6000-8000 psi) on the morphology, crystallinity, and surface area of the resulting nanostructured composites were examined using scanning electron microscopy (SEM), transmission electron microscopy (TEM), powder X-ray diffraction (XRD), and Brunauer-Emmet-Teller (BET) method. Chemical composition of the products was characterized using Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and X-ray absorption near-edge structure (XANES) analyses. HAp nanoplates and HAp-TiO2 nanocomposites were homogeneously mixed within poly(ε-caprolactone) (PCL) to develop scaffolds with enhanced physical and mechanical properties for bone regeneration. Mechanical behavior analysis demonstrated that the Young's and flexural moduli of the PCL/HAp-TiO2 composites were substantially higher than the PCL/HAp composites. Therefore, this new synthesis methodology in scCO2 holds promise for bone tissue engineering with improved mechanical properties.