The essential function of Rrs1 in ribosome biogenesis is conserved in budding and fission yeasts.

The Rrs1 protein plays an essential role in the biogenesis of 60S ribosomal subunits in budding yeast (Saccharomyces cerevisiae). Here, we examined whether the fission yeast (Schizosaccharomyces pombe) homologue of Rrs1 also plays a role in ribosome biogenesis. To this end, we constructed two temperature-sensitive fission yeast strains, rrs1-D14/22G and rrs1-L51P, which had amino acid substitutions corresponding to those of the previously characterized budding yeast rrs1-84 (D22/30G) and rrs1-124 (L61P) strains, respectively. The fission yeast mutants exhibited severe defects in growth and 60S ribosomal subunit biogenesis at high temperatures. In addition, expression of the Rrs1 protein of fission yeast suppressed the growth defects of the budding yeast rrs1 mutants at high temperatures. Yeast two-hybrid analyses revealed that the interactions of Rrs1 with the Rfp2 and Ebp2 proteins were conserved in budding and fission yeasts. These results suggest that the essential function of Rrs1 in ribosome biogenesis may be conserved in budding and fission yeasts.

Influence of Isostatic Pressure on the Elastic and Electronic Properties of K2SiF6:Mn4.

Isostatic pressure effects on the elastic and electronic properties of non-doped and Mn4+-doped K2SiF6 (KSF) have been investigated by first-principles calculations within density functional theory (DFT). Bulk modulus was obtained by the Murnaghan's equation of states (EOS) using the relationship between volume and pressures at pressures between 0 and 40 GPa, and elastic constants were calculated by the stress-strain relationship giving small distortions at each pressure point. The other elastic parameters such as shear modulus, sound velocity and Debye temperature, which can be obtained from the elastic constants, were also estimated. The influence of external isostatic pressure on the electronic properties, such as crystal field strength 10Dq and emission energy of 2E → 4A2 transition (Eem), of KSF:Mn4+ was also studied. The results suggest that 10Dq and Eem linearly increase and decrease, respectively, with increasing pressure.

Estimation of organ-absorbed radiation doses during 64-detector CT coronary angiography using different acquisition techniques and heart rates: a phantom study.

BACKGROUND: Though appropriate image acquisition parameters allow an effective dose below 1 mSv for CT coronary angiography (CTCA) performed with the latest dual-source CT scanners, a single-source 64-detector CT procedure results in a significant radiation dose due to its technical limitations. Therefore, estimating the radiation doses absorbed by an organ during 64-detector CTCA is important. PURPOSE: To estimate the radiation doses absorbed by organs located in the chest region during 64-detector CTCA using different acquisition techniques and heart rates. MATERIAL AND METHODS: Absorbed doses for breast, heart, lung, red bone marrow, thymus, and skin were evaluated using an anthropomorphic phantom and radiophotoluminescence glass dosimeters (RPLDs). Electrocardiogram (ECG)-gated helical and ECG-triggered non-helical acquisitions were performed by applying a simulated heart rate of 60 beats per minute (bpm) and ECG-gated helical acquisitions using ECG modulation (ECGM) of the tube current were performed by applying simulated heart rates of 40, 60, and 90 bpm after placing RPLDs on the anatomic location of each organ. The absorbed dose for each organ was calculated by multiplying the calibrated mean dose values of RPLDs with the mass energy coefficient ratio. RESULTS: For all acquisitions, the highest absorbed dose was observed for the heart. When the helical and non-helical acquisitions were performed by applying a simulated heart rate of 60 bpm, the absorbed doses for heart were 215.5, 202.2, and 66.8 mGy for helical, helical with ECGM, and non-helical acquisitions, respectively. When the helical acquisitions using ECGM were performed by applying simulated heart rates of 40, 60, and 90 bpm, the absorbed doses for heart were 178.6, 139.1, and 159.3 mGy, respectively. CONCLUSION: ECG-triggered non-helical acquisition is recommended to reduce the radiation dose. Also, controlling the patients' heart rate appropriately during ECG-gated helical acquisition with ECGM is crucial.

Effects of Enhanced Intracranial Pressure on Blood Pressure and the Cardio-Ankle Vascular Index in Rabbits.

AIM: Stroke is well known to lead to hypertension; nevertheless, the role of vascular function in hypertension remains unclear. In this study, we aimed to clarify the mechanism underlying increased arterial stiffness following stroke. METHODS: The cardio-ankle vascular index (CAVI) was measured in five New Zealand White rabbits. Under general anesthesia, intracranial pressure (ICP) was increased by injecting saline (15 mL) into the cisterna magna. ICP was monitored using a catheter inserted into the subarachnoid space via right frontal bone craniotomy. Blood pressure (BP), CAVI, and common carotid flow (CCF) were evaluated, and the responses of these parameters to increased ICP were analyzed. RESULTS: Saline injection into the cisterna magna increased the ICP by over 20 mmHg. Both BP and CAVI increased from 63.2±4.84 to 128.8±14.68 mmHg and from 4.02±0.28 to 4.9±0.53, respectively. Similarly, BP and CCF increased. When hexamethonium was administered before the increase in ICP, the increase in BP (132.2±9.41 mmHg with 10 mg/kg hexamethonium vs. 105.6±11.01 mmHg with 100 mg/kg hexamethonium) and CAVI (5.02±0.64 with 10 mg/kg hexamethonium vs. 4.82±0.42 with 100 mg/kg hexamethonium) were suppressed in a dose-dependent manner. CONCLUSION: Increased ICP causes an increase in BP and CAVI, suggesting that enhanced stiffness of the muscular arteries contributes to high BP. Blocking the autonomic nervous system with hexamethonium suppresses the increase in BP and CAVI, indicating that these increases are mediated by activation of the autonomic nervous system.

Unusual hydrogen implanted gold with lattice contraction at increased hydrogen content.

The experimental evidence for the contraction of volume of gold implanted with hydrogen at low doses is presented. The contraction of lattice upon the addition of other elements is very rare and extraordinary in the solid-state, not only for gold but also for many other solids. To explain the underlying physics, the pure kinetic theory of absorption is not adequate and the detailed interaction of hydrogen in the lattice needs to be clarified. Our analysis points to the importance of the formation of hydride bonds in a dynamic manner and explains why these bonds become weak at higher doses, leading to the inverse process of volume expansion frequently seen in metallic hydrogen containers.

[Measurement of effective energy and entrance surface dose using fluorescent glass dosimeter in interventional radiology procedures: make of half-value layer measurement instrument and IVR-phantom].

In interventional radiology (IVR) procedures, automatic brightness control (ABC) is helpful in maintaining good image quality by adjusting kV and/or mA based on the subject's thickness. However, it was difficult to measure effective energy using half-value layer (HVL). We investigated the usefulness of measuring effective energy and entrance surface dose using a fluorescent glass dosimeter in IVR procedures, and we made an HVL folder and IVR-phantom for that purpose. Effective energy measured using the HVL folder correlated well with reference ionization dosimeter (y=0.992x, r=0.963). The result indicated that the present method using an HVL folder and IVR-phantom provides accurate measurements of effective energy and entrance surface dose in IVR procedures. In conclusion, the present measurement method may be useful for quality control of IVR equipment. In addition, the development of this measurement technique may be useful for comparisons of exposure levels in different hospitals.

[Quantitative evaluation of Gd-EOB-DTPA uptake in phantom study for liver MRI].

Gd-EOB-DTPA is a new liver specific MRI contrast media. In the hepatobiliary phase, contrast media is trapped in normal liver tissue, a normal liver shows high intensity, tumor/liver contrast becomes high, and diagnostic ability improves. In order to indicate the degree of uptake of the contrast media, the enhancement ratio (ER) is calculated. The ER is obtained by calculating (signal intensity (SI) after injection-SI before injection) / SI before injection. However, because there is no linearity between contrast media concentration and SI, ER is not correctly estimated by this method. We discuss a method of measuring ER based on SI and T(1) values using the phantom. We used a column phantom, with an internal diameter of 3 cm, that was filled with Gd-EOB-DTPA diluted solution. Moreover, measurement of the T(1) value by the IR method was also performed. The ER measuring method of this technique consists of the following three components: 1) Measurement of ER based on differences in 1/T(1) values using the variable flip angle (FA) method, 2) Measurement of differences in SI, and 3) Measurement of differences in 1/T(1) values using the IR method. ER values calculated by these three methods were compared. In measurement made using the variable FA method and the IR method, linearity was found between contrast media concentration and ER. On the other hand, linearity was not found between contrast media concentration and SI. For calculation of ER using Gd-EOB-DTPA, a more correct ER is obtained by measuring the T(1) value using the variable FA method.

The Background of Calculating CAVI: Lesson from the Discrepancy Between CAVI and CAVI0.

Arterial stiffness is a good predictor of cardiovascular events. As a substitute for elastic modulus representing stiffness, pulse wave velocity (PWV) has been used for over a century as it is easy to measure; however, PWV is known to essentially depend on blood pressure at the time of measurement. The cardio-ankle vascular index (CAVI) is a relatively new index of global arterial stiffness of the origin of the aorta to the ankle arteries. The characteristic feature is its independency from blood pressure at the measuring time. Recently, a variant index CAVI0 was proposed, which was claimed to be a more accurate arterial stiffness index than CAVI, considering independency from blood pressure. The purpose of this review is to evaluate the properties of CAVI more precisely by comparing with CAVI0, and to confirm the true meaning of CAVI as an index of arterial stiffness. First, the properties of PWV depending on the blood pressure and the variation of PWV values in the cardiac cycle were analyzed. Then, we attempted to clarify the point at which the PWV, adopted in CAVI or in CAVI0, was measured in cardiac cycle. A comprehensive comparison of the clinical data of CAVI and CAVI0 showed that CAVI is more appropriate than CAVI0. In conclusion, CAVI is reconfirmed to be a reliable and useful index of blood pressure-independent arterial stiffness composed of both organic and functional stiffness.

In vitro characterization of the site-specific recombination system based on actinophage TG1 integrase.

We have previously shown that, in vivo, the integration system based on the gene encoding the TG1 integrase and the corresponding attB (TG1) and attP (TG1) sites works well not only in Streptomyces strains, but also in Escherichia coli. Furthermore, the attachment sites for TG1 integrase are distinct from those of phi C31 integrase. In this report, we expressed TG1 integrase as a GST-TG1 integrase fusion protein and then used affinity separation and specific cleavage to release purified integrase. Conditions for in vitro recombination were established using the purified TG1 integrase and its cognate attP (TG1) and attB (TG1) sites. TG1 integrase efficiently catalyzed a site-specific recombination between attB (TG1) and attP (TG1) sites irrespective of their substrate topology. The minimal sequences of attP (TG1) and attB (TG1) sites required for the substrates of TG1 integrase were demonstrated to be 43 and 39-bp, respectively. These results provide the basic features of the TG1 integrase system to be used as biotechnological tools, as well as to unravel the mechanism of the serine integrase.

Effective dose evaluation of multidetector CT examinations: influence of the ICRP recommendation in 2007.

We compared effective doses for recent computed tomography (CT) examinations calculated based on International Commission on Radiological Protection publication number 103 (ICRP 103) with those calculated based on ICRP publication number 60 (ICRP 60), and considered the usefulness of the effective dose in CT dose evaluation. After placing radiophotoluminescence glass dosimeters (RPLDs) inside or outside an anthropomorphic phantom, we examined from the chest to the pelvis, cardiac, and cranial regions of the phantom. The absorbed dose was calculated by multiplying calibrated dose values of RPLD by the mass energy coefficient ratio. The effective dose was calculated as the sum total of the value for each tissue, which was multiplied by the equivalent dose according to the tissue weighting factor recommended in ICRP 103 and ICRP 60. Calculated effective doses based on ICRP 103 were different by ­11% to +82% compared with those based on ICRP 60. The values of absorbed doses for selective tissues were relatively higher than the values for the effective dose. The effective dose represents only a mean dose value for an average human. Therefore, assessing the absolute dose of particular individuals in CT examinations based exclusively on the effective dose is not recommended.

Misoperation of CT automatic tube current modulation systems with inappropriate patient centering: phantom studies.

OBJECTIVE: Inappropriate patient centering on the gantry changes the size of the localizer radiographs used for CT examinations, influencing the operation of CT automatic tube current modulation because tube current is controlled with information from localizer radiographs. The purpose of this study was to examine the influence of inappropriate patient centering on the gantry isocenter on automatic tube current modulation. MATERIALS AND METHODS: An elliptical phantom was scanned with four automatic tube current modulation techniques after acquisition of localizer radiographs in the horizontal and vertical directions with the phantom center shifted from the gantry isocenter in the vertical direction. After scanning, the magnification rate of the frontal localizer radiographs, tube current-time product, and image noise were examined. RESULTS: On phantom studies, the magnification rate of localizer radiographs showed a linear relation to the vertical deviation of the phantom from the gantry isocenter. From 50 mm above to 50 mm below the gantry isocenter, tube current-time products ranged from 75% to 141% compared with those at the gantry isocenter. In addition, increases and decreases in the amount of image noise related to changes in tube current-time product were confirmed. CONCLUSION: Inappropriate patient centering causes misoperation of automatic tube current modulation systems, in which tube current is controlled with information from localizer radiographs, and thus causes increases in tube current or image noise.

Local environment analysis of dopants in ceramics by x-ray absorption near-edge structure with the aid of first-principles calculations.

Three types of functional ceramic materials, (1) dilute magnetic semiconductor, (2) phosphor and (3) electrolyte of a solid fuel cell, are fabricated by the conventional solid state reaction method. Local environments of dopants in these ceramic materials here synthesized are systematically investigated by using the x-ray absorption near-edge structure (XANES) with the aid of first-principles calculations. Our present analytical method by combined use of XANES and first principles calculations has successfully explained the local environment of dopants in the above ceramic materials.

[Effectiveness of a positioning doll for radiography: through performance as a practice of radiography training and a questionnaire targeted for radiological technologists].

The effectiveness of a positioning doll for radiography training (XPD) and acquiring the techniques of radiography was evaluated through performing radiography practice for the students in our school of radiological technologists and a questionnaire for radiological technologists. We made a ranking test composed of a five-grade evaluation system of the 39 students for the techniques of radiography before and after the practice, and questionnaires about the XPD were given to the same students after the practice. The questionnaires about affinities between human bodies and the XPD and effectiveness of the XPD for the education of students were also carried out in six radiological technologists to examine the effectiveness of the practice of radiography by using the XPD. The rankings of the students after the practice were significantly higher than those before the practice (p <0.01), and 85% of the students rated the practice using the XPD as useful for them in acquiring the techniques of radiography. Seventy-eight percent of the radiological technologists rated it useful for student education in radiography. In conclusion, it was suggested that practice using the XPD was effective in helping students to acquire the techniques of radiography. We would like to develop supplementary tools for fixing the XPD and using the practice of radiography in many ways and in new directions in the future.

Comparison of Cardio-Ankle Vascular Index (CAVI) and CAVI0 in Large Healthy and Hypertensive Populations.

AIM: The cardio-ankle vascular index (CAVI) represents the blood pressure-independent arterial stiffness from the origin of the aorta to the ankle. CAVI0 has been proposed as a variant index. We aimed to clarify the difference between CAVI and CAVI0 among large populations, and to explore reasons of the difference. METHODS: The subjects were 5,293 Japanese healthy and 3,338 hypertensive people. Simple and multiple regression analyses were performed using age, sex, body mass index, systolic, and diastolic blood pressure (Pd) as variables. Sub-group analysis was performed by sex and age. The CAVI values with and without adjustment by reference pressure were also compared. RESULTS: CAVI had a positive correlation with Pd, while CAVI0 had a negative correlation with Pd in the healthy population. The CAVI values of the hypertensive group were higher than those of healthy group in both men and women, but the CAVI0 values in women of the hypertensive group in the 30-39 age group was significantly lower than that of the corresponding healthy group. Differences of CAVI values with or without modification using the reference pressure were 1.09%±1.38% for the healthy group and 3.68%±1.66% for the hypertensive group. CONCLUSION: CAVI showed the expected values, but CAVI0 showed inexplicable results in the healthy and hypertensive populations. The differences were due to the strong dependency of CAVI0 on Pd. Differences of CAVI values with or without reference pressure were negligible. These results indicate that CAVI obtained by the VaSera system is appropriate, but CAVI0 is not.

Proton Irradiation Tolerance of High-Efficiency Perovskite Absorbers for Space Applications.

Lead halide perovskite single layers with three grain sizes are subjected to proton-beam irradiation in order to assess the durability and radiation tolerance of perovskite solar cells (PSCs) against space radiation. Proton-beam irradiation is chosen because proton beams significantly affect solar cell performance in the space environment. We evaluate the effects of proton beams by focusing on the grain structure, crystal structure, and carrier lifetime of a perovskite single layer by using scanning electron microscopy, X-ray diffraction, photoluminescence (PL) spectra, and time-resolved PL (TRPL). The results show that proton irradiation does not significantly affect the grain structure and crystal structure of perovskite layer; the TRPL results show that the carrier lifetime inside the grain is constant up to a fluence of 1 × 1014 p+/cm2 and decreases significantly at a fluence of 1 × 1015 p+/cm2. Proton-beam radiation tolerance of the grain inside the perovskite layer is dominant in the radiation tolerance of PSCs.

Coefficients in the CAVI Equation and the Comparison Between CAVI With and Without the Coefficients Using Clinical Data.

AIM: The Cardio-Ankle Vascular Index (CAVI) is a stiffness index of the arterial tree from the origin of the aorta to the ankle, independent of blood pressure at the time of measurement. The CAVI equation includes the coefficients "a" and "b" to adjust it to the value of Hasegawa's pulse wave velocity, which is compensated for at 80 mmHg of diastolic pressure. To verify this adjustment with the coefficients, the clinical significance of CAVI and CAVI without the coefficients (haß) were compared in both an epidemiological study and an acute clinical study. METHODS: In the epidemiological study, the significances of CAVI and haß among people with or without coronary risks such as hypertension, dyslipidemia, hyperglycemia, and abnormal electrocardiography change, were compared. In the acute clinical study, nitroglycerin was administered to subjects in a control group and to coronary artery disease patients, observing CAVI and haß values over a 20-min period. RESULTS: There was no discrepancy in terms of statistically significant differences between CAVI and haß among subjects with or without risk factors. Furthermore, there was also no discrepancy in terms of statistically significant differences between CAVI and haß during the changes of those values following nitroglycerin administration over a 20-min period. CONCLUSION: In both the epidemiologic and clinical studies, there was no discrepancy in terms of significant differences between CAVI and haß. These results suggest that both are valid as indices of stiffness of the arterial tree from the origin of the aorta to the ankle.

Hierarchical organization of the coordinative structure of the skill of clay kneading.

An experiment was conducted to study the skill of clay kneading in pottery. This task usually requires a few years to master and is therefore well suited to study the long-term development of a complex motor skill. Participants' kneading movements were measured in 3D using a motion capture device and phase relations among coordinates and joint angles were analyzed in terms of the mutual phase relative to a reference point using the Hilbert transform. While a certain degree of periodicity was observed in all 10 participants, the behavior of the experts was characterized by a significant delay for the right elbow (i.e., the pushing arm) and the fore-aft position of the upper torso and only brief delays for the other parts, which all tended to synchronize with the reference. These findings are consistent with our notion of "differentiation within coordination", according to which skill learning proceeds in a hierarchical manner in that coordination among limb movements is established first, followed by modulations of specific limb movements within the established coordination. Although this feature of expert behavior was also apparent in our previous studies of clay kneading and samba shaking and dancing, the numbers of participants in those studies were not sufficient to draw firm conclusions. Since the present study involved more participants and a superior method of analysis, the present evidence for the principle of differentiation within coordination is more conclusive.

Semiautomated volumetry of the cerebrum, cerebellum-brain stem, and temporal lobe on brain magnetic resonance images.

PURPOSE: The aim of this study was to develop an automated method of segmenting the cerebrum, cerebellum-brain stem, and temporal lobe simultaneously on magnetic resonance (MR) images. METHODS AND MATERIALS: We obtained T1-weighted MR images from 10 normal subjects and 19 patients with brain atrophy. To perform automated volumetry from MR images, we performed the following three steps: (1) segmentation of the brain region; (2) separation between the cerebrum and the cerebellum-brain stem; and (3) segmentation of the temporal lobe. Evaluation was based on the correctly recognized region (CRR) (i.e., the region recognized by both the automated and manual methods). RESULTS: The mean CRRs of the normal and atrophic brains were 98.2% and 97.9% for the cerebrum, 87.9% and 88.5% for the cerebellum-brain stem, and 76.9% and 85.8% for the temporal lobe, respectively. CONCLUSION: We introduce an automated volumetric method for the cerebrum, cerebellum-brain stem, and temporal lobe on brain MR images. Our method can be applied to not only the normal brain but also the atrophic brain.

[Evaluation of appropriate slice thickness setting in multidetector-row CT examinations for screening of liver cancer].

UNLABELLED: In this study, we evaluated clinical images to determine appropriate settings for slice thickness in screening examinations for hepatocellular carcinoma and metastatic liver cancer, which are frequently performed in abdominal CT. The clinical images of 15 cases screened for hepatocellular carcinoma and 15 cases screened for metastatic liver cancer were evaluated. The evaluation was visually performed by three abdominal radiologists, and the sensitivity and specificity of each slice thickness were calculated. RESULTS: differences in sensitivity and specificity were not found between slice thicknesses of 2.5 mm and 5.0 mm; however, sensitivity and specificity were low, and confidence was also low at a 10.0 mm slice thickness. Furthermore, when a 5.0 mm slice thickness was adopted, it was shown that radiation dose in limited parts could be reduced greatly to a noise level that compared equally with a study in which a 2.5 mm slice thickness was adopted in another evaluation. Therefore, the objective could be achieved by using a slice thickness of about 5.0 mm in multidetector-row CT examinations for the screening of liver cancer, while controlling patient dose to a minimum.

[Development of semi-automated segmentation of the brain and CSF Region on MR images].

MR imaging (MRI) is an important method for the diagnosis of abnormalities of the brain. In the present report, a semi-automated method is presented to segment the brain and CSF region on brain MR images. MR images were obtained from 6 subjects by SE sequence and 8 subjects by GRE sequence. The semi-automated method consisted of the following three steps: (1) segmentation of the intracranial region using the region-growing technique, (2) segmentation of the brain region using histogram analysis and mathematical morphology, and (3) segmentation of the CSF region using the top-hat transformation technique. The average ratio of a correctly recognized region (CRR) between the semi-automated method and manual method was 87.9%, 85.1% for the intracranial region (IRR), and 94.8% and 86.8% for the brain region in the SE and GRE sequences.