RESUMO
Objective: To optimize the supercritical fluid extraction technology of flavonoids from taxus remainder extracts free of taxoids( TREFT) by response surface methodology( RSM). Methods: By using a central composite design( CCD) in four factors and five levels to optimize the extraction parameters. The effects of extraction time, temperature, pressure and different concentration of ethanol and their interaction on the extraction rate of total flavonoids, amentoflavone, quercetin and ginkgetin which extracted from TREFT by supercritical fluid CO2 were investigated. Results: Under optimal conditions of extraction time for 2. 2 h,and the extraction temperature was 46. 4 â,the extraction pressure was 22. 6 MPa, and 80. 7% ethanol, the index experimental of total flavonoids and monomer compositions was 98. 75. Conclusion: The process of flavonoids extraction from TREFT is stable and feasible, which can provide technical support for the resource utilization of TREFT.
Assuntos
Cromatografia com Fluido Supercrítico , Taxus , Dióxido de Carbono , Etanol , Flavonoides , Extratos Vegetais , Pressão , Taxoides , TemperaturaRESUMO
The effects of extraction time, temperature, pressure and different concentration of ethanol and their interactions on the yields of amentoflavone, quercetin and ginkgetin extracted from Taxus chinensis by supercritical CO2 were investigated by using a central composite design (CCD). An CCD experimental design with four factors and five levels was used to optimize the extraction parameters. Ultra performance liquid chromatography (UPLC) was used to analyze the content of the tree components in the extracts. Experimental results show that the main effects of factors and their interactions are significant on the yields (p < 0.05). The optimal extraction conditions were established for the three compounds: yield of 4.47 mg/g for amentoflavone at 48 °C, 25 MPa, 2.02 h and 78.5% ethanol, 3.73 mg/g for quercetin at 46 °C, 24 MPa, 2.3 h, 82% ethanol and 3.47 mg/g for ginkgetin at 48 °C, 20 MPa, 2.38 h, 82% ethanol, respectively.
Assuntos
Biflavonoides/química , Dióxido de Carbono/química , Extratos Vegetais/química , Quercetina/química , Solventes/química , Taxus/química , Cromatografia Líquida de Alta Pressão/métodos , Etanol/química , Pressão , TemperaturaRESUMO
An efficient separation process of flavonoid from Taxus wallichiana var. mairei remainder extracts free of taxoids was developed in this study. AB-8 macroporous resin and polyamide resin offered the fine adsorption capacity, and its adsorption rate at 30°C fitted well to the Langmuir and Freundich isotherms. Resin dynamic adsorption and desorption experiments were conducted to optimize the separation process of total flavonoids from T. wallichiana var. mairei remainder extracts free of taxoids. The optimum parameters for adsorption by AB-8 resin were as follows: (1) the concentration of flavonoids in a sample solution of 5.61 mg/mL with a processing volume of 2 bed volume (BV) (60 mL); (2) for desorption, ethanol-water (80:20, v/v), with 6 BV as an eluent at a flow rate of 2 BV/h. After a one-run treatment with AB-8 resin, the content of flavonoids was increased 5.10-fold from 4.05 to 20.65%. The optimum parameters for adsorption by polyamide resin were as follows: processing volume of 2 BV (30 mL); for desorption, ethanol-water (70:30, v/v), with 8 BV as an eluent at a flow rate of 2 BV/h. After one-run treatment with polyamide resin, the content of total flavonoids increased from 20.65 to 65.21%. The method will provide a potential approach for large-scale separation and purification of flavonoid for its wide pharmaceutical use.