Pd-Catalyzed Vinylation of Aryl Halides with Inexpensive Organosilicon Reagents Under Mild Conditions.

Pd-catalyzed Hiyama vinylation reaction of non-activated aryl chlorides and bromides under mild conditions was developed. The use of efficient vinyl donors and electron-rich sterically hindered phosphine ligands was critical for the success of the reaction. The products of this transformation can be used for Am/Cm separation, an important challenge in nuclear fuel reprocessing. The substituent effect on Am/Cm separating selectivity was also achieved, which could contribute to the development of new chromatographic materials for the separation of Am and Cm.

"One-pot" synthesis of amidoxime via Pd-catalyzed cyanation and amidoximation.

A novel "one-pot" reaction was developed for the synthesis of aryl or heteroaryl-substituted amidoxime compounds containing various functional groups. Fluorescence titration experiments coupled with theoretical analysis revealed that the steric hindrance and electronic effects of substituents influence the binding ability of the amidoxime compounds to uranyl ions.

Copper-catalyzed reductive cross-coupling of nonactivated alkyl tosylates and mesylates with alkyl and aryl bromides.

A copper-catalyzed reductive cross-coupling reaction of nonactivated alkyl tosylates and mesylates with alkyl and aryl bromides was developed. It provides a practical method for efficient and cost-effective construction of aryl-alkyl and alkyl-alkyl CC bonds with stereocontrol from readily available substrates. When used in an intramolecular fashion, the reaction enables convenient access to various substituted carbo- or heterocycles, such as 2,3-dihydrobenzofuran and benzochromene derivatives.

Copper-catalyzed cross-coupling of nonactivated secondary alkyl halides and tosylates with secondary alkyl Grignard reagents.

Practical catalytic cross-coupling of secondary alkyl electrophiles with secondary alkyl nucleophiles under Cu catalysis has been realized. The use of TMEDA and LiOMe is critical for the success of the reaction. This cross-coupling reaction occurs via an S(N)2 mechanism with inversion of configuration and therefore provides a general approach for the stereocontrolled formation of C-C bonds between two tertiary carbons from chiral secondary alcohols.

Alkylboronic esters from copper-catalyzed borylation of primary and secondary alkyl halides and pseudohalides.

Easy access: An unprecedented copper-catalyzed cross-coupling reaction of the title compounds with diboron reagents is described (see scheme; Ts = 4-toluenesulfonyl). This reaction can be used to prepare both primary and secondary alkylboronic esters having diverse structures and functional groups. The resulting products would be difficult to access by other means.

Highly selective extraction of uranium from wastewater using amine-bridged diacetamide-functionalized silica.

A major environmental concern related to nuclear energy is wastewater contaminated with uranium, thus necessitating the development of pollutant-reducing materials with efficiency and effectiveness. Herein, highly selective mesoporous silicas functionalized with amine-bridged diacetamide ligands SBA-15-ABDMA were prepared. Different spectroscopy techniques were used to probe the chemical environment and reactivity of the chelating ligands before and after sorption. The results showed that the functionalized SBA-15-ABDMA had a strong affinity for uranium at low pH (pH = 3) with desirable sorption capacity (68.82 mg/g) and good reusability (> 5). It showed excellent separation performance with a high distribution coefficient (Kd,U > 105 mL/g) and separation factors SFU/Ln > 1000 at a pH of 3.5 in the presence of lanthanide nuclides, alkaline earth metal and transition metal ions. In particular, SiO2spheres-ABDMA was used as a column material, which achieved excellent recovery of U(VI) (> 98%) and good reusability for samples of simulated mining and nuclear industries wastewater. XPS and crystallography studies clearly illustrated the tridentate coordination mode of U(VI)/PEABDMA and the mechanism and origin behind the high selectivity for U.

Antibodies against Helicobacter pylori heat shock protein 60 aggravate HSP60-mediated proinflammatory responses.

Anti-Helicobacter pylori heat shock protein 60 (HpHSP60) antibodies are usually found in H. pylori-infected patients and are known to be associated with the progression of gastric diseases. However, the effects of these antibodies on the functions of HpHSP60 have not been identified. This study aims to investigate the effects of the interaction between anti-HSP60 antibodies and HpHSP60 on inflammatory responses. Anti-HpHSP60 polyclonal sera and monoclonal antibodies (mAbs) were produced to evaluate their effects on HpHSP60-induced IL-8 and TNF-α activity. The results indicated that anti-HpHSP60 polyclonal sera collected from patients infected with H. pylori or from rabbit and mice immunized with HpHSP60 could significantly enhance HpHSP60-mediated IL-8 and TNF-α secretion from monocytic THP-1 cells. Similar effects were also found with anti-HpHSP60 mAbs. Further analysis revealed that this phenomenon was only carried out by anti-HpHSP60 antibody but not by other non-specific mAbs. Moreover, the non-specific mAbs decreased the synergism of HpHSP60 and anti-HpHSP60 mAbs in proinflammatory cytokine induction. Herein, we have examined the role of anti-HpHSP60 antibody in host immune responses for the first time. This study demonstrated that H. pylori HSP60/mAbs could modulate helicobacterial pathogenesis by increasing IL-8 and TNF-α production. The pathogen-specific antibodies may execute potential immune functions rather than recognize or neutralize microbes.

Cu-Catalyzed carbon-heteroatom coupling reactions under mild conditions promoted by resin-bound organic ionic bases.

Resin-bound organic ionic bases (RBOIBs) were developed in which tetraalkyl-ammonium or phosphonium cations are covalently attached to solid resins. The application tests showed that the performance of the tetraalkyl-ammonium-type RBOIBs is slightly better than that of the corresponding Cs salts in Cu-catalyzed C-N cross-couplings, while the tetraalkylphosphonium-type RBOIBs are significantly better than all the inorganic bases. With these newly developed RBOIBs, room-temperature Cu-catalyzed C-N coupling with various nonactivated aryl iodides and even aryl bromides can be readily accomplished. Moreover, RBOIBs can be easily recycled and reused for a number of times without much drop of activity. The good performances of RBOIBs are proposed to arise from the relatively weak binding forces between the cationic polymer backbone and basic anions, as opposed to the strong metal-anion interactions in the inorganic bases. Further applications of RBOIBs in Ni-catalyzed Suzuki-type couplings at room temperature, Cu-catalyzed C-N couplings at -30 °C, a Pd-catalyzed Heck reaction at 60 °C, and Cu-catalyzed C-S couplings at room temperature demonstrate that RBOIBs are generally applicable bases with improved performance for many other types of organic transformations.

The Hydrolytic Stability and Degradation Mechanism of a Hierarchically Porous Metal Alkylphosphonate Framework.

To aid the design of a hierarchically porous unconventional metal-phosphonate framework (HP-UMPF) for practical radioanalytical separation, a systematic investigation of the hydrolytic stability of bulk phase against acidic corrosion has been carried out for an archetypical HP-UMPF. Bulk dissolution results suggest that aqueous acidity has a more paramount effect on incongruent leaching than the temperature, and the kinetic stability reaches equilibrium by way of an accumulation of a partial leached species on the corrosion conduits. A variation of particle morphology, hierarchical porosity and backbone composition upon corrosion reveals that they are hydrolytically resilient without suffering any great degradation of porous texture, although large aggregates crack into sporadic fractures while the nucleophilic attack of inorganic layers cause the leaching of tin and phosphorus. The remaining selectivity of these HP-UMPFs is dictated by a balance between the elimination of free phosphonate and the exposure of confined phosphonates, thus allowing a real-time tailor of radionuclide sequestration. Moreover, a plausible degradation mechanism has been proposed for the triple progressive dissolution of three-level hierarchical porous structures to elucidate resultant reactivity. These HP-UMPFs are compared with benchmark metal-organic frameworks (MOFs) to obtain a rough grading of hydrolytic stability and two feasible approaches are suggested for enhancing their hydrolytic stability that are intended for real-life separation protocols.

An initial demonstration of hierarchically porous niobium alkylphosphonates coordination polymers as potent radioanalytical separation materials.

Combining the merits of soft-templating and perchlorate oxidation methods, the first-case investigation of niobium alkylphosphonates has uncovered their unique morphology, backbone composition, thermal behavior and huge potentiality as radioanalytical separation materials. These hierarchically porous solids are random aggregates of densely stacked nanolayers perforated with worm-like holes or vesicular voids, manifesting the massif-, tower-like "polymer brush" elevated up to ∼150nm driven by the minimal surface free energy principle. These coordination polymers consist of distorted niobium (V) ions strongly linked with tetrahedral alkylphosphonate building units, exposing uncoordinated phosphonate moieties and defective metal sites. Despite the amorphous features, they demonstrate multimodal porosity covering continuous micropores, segregated mesopores and fractional macropores, beneficial for the sequestration by active Lewis acid-base center. Evidenced by the maximum distribution coefficients of thorium, lanthanides reaching 9.0×104, 9.5×104mLg-1 and large separation factor at pH≤1 20-element cocktail, this category of niobium alkylphosphonates are capable of harvesting thorium, lanthanides directly from the radionuclide surrogate, comparable to or even surpass the performance of the metal (IV) arylphosphonates counterparts. They also display appreciable SFEu/Sm ∼20 in 1molL-1 HNO3, shedding light on dual approaches to achieve the isolation of americium from curium. A combinatorial radioanalytical separation protocol has been proposed to enrich thorium and europium, revealing facile utilization of these highly stable, phosphonated hybrids in sustainable development of radioanalytical separation.

Fluorescent recognition of uranyl ions by a phosphorylated cyclic peptide.

Fluorescent recognition of uranyl ions was achieved using a phosphorylated cyclic peptide, which can be used as a fluorescent sensor for the detection of uranyl ions with high selectivity and sensitivity.

Cu-catalyzed cross-coupling reactions of epoxides with organoboron compounds.

A copper-catalyzed cross-coupling reaction of epoxides with arylboronates is described. This reaction is not limited to aromatic epoxides, because aliphatic epoxides are also suitable substrates. In addition, N-sulfonyl aziridines can be successfully converted into the products. This reaction provides convenient access to ß-phenethyl alcohols, which are valuable synthetic intermediates.

Efficient synthesis of 1,5-disubstituted carbohydrazones using K2CO3 as a carbonyl donor.

A novel reaction that generates 1,5-disubstituted carbohydrazones via the carbonylation of tosylhydrazones has been developed. For the first time, the inexpensive, readily available, environmentally friendly, and nongaseous potassium carbonate is used as the carbonyl donor for the transformation. The reaction system exhibited tolerance with various functional groups and affords the desired products in good to excellent yields. This reaction is expected to be a powerful tool for the synthesis of carbohydrazone compounds.

Copper-catalyzed/promoted cross-coupling of gem-diborylalkanes with nonactivated primary alkyl halides: an alternative route to alkylboronic esters.

The first copper-catalyzed/promoted sp(3)-C Suzuki-Miyaura coupling reaction of gem-diborylalkanes with nonactivated electrophilic reagents is reported. Not only 1, 1-diborylalkanes but also some other gem-diborylalkanes can be coupled with nonactivated primary alkyl halides, offering a new method for sp(3)C-sp(3)C bond formation and, simultaneously, providing a new strategy for the synthesis of alkylboronic esters.