Voiceprint and position information detection of non-cooperative ship with Φ-OTDR and suspended sensitized optical cable.

Target detection is significant in many fields, including oceanic security, marine ecology, etc. In this paper, phase sensitive optical time domain reflectometry (Φ-OTDR) is introduced for the non-cooperative ship detection, with large-scale diversity technology and suspended sensitized optical cable. In outfield experiments, the ship's voiceprint information is obtained in high fidelity, the ship's power spectrum is analyzed, and the over-top detection is achieved. Moreover, an array orientation method based on adaptive phase difference correction (APDC) is proposed to track the ship, suppressing the delay jitter influence of acoustic transmission underwater. This is the first time that voiceprint information of the non-cooperative ship is high-fidelity acquired and deeply analyzed with Φ-OTDR and suspended sensitized optical cable, which is conducive to the detection and identification of marine targets, and proves the potential of Φ-OTDR in hydroacoustic detection applications.

Laser Direct Writing of Flexible Thermal Flow Sensors.

Thin film-based thermal flow sensors afford applications in healthcare and industries owing to their merits in preserving initial flow distributions. However, traditional thermal flow sensors are primarily applied to track flow intensities based on hot-wire or hot-film sensing mechanisms due to their relatively facile device configurations and fabrication strategies. Herein, a calorimetric thermal flow sensor is proposed based on laser direct writing to form laser-induced graphene as heaters and temperature sensors, resulting in monitoring both flow intensities and orientations. Via homogeneously surrounding spiral heaters with multiple temperature sensors, the device exhibits high sensitivity (∼162 K·s/m) at small flows with an extended flow detection range (∼25 m/s). Integrating the device with a data-acquisition board and a dual-mode graphical user interface enables wirelessly and dynamically monitoring respiration and the motion of robotic arms. This versatile flow sensor with facile manufacturing affords potentials in health inspection, remote monitoring, and studying hydrodynamics.

Reprogrammable Metamaterial Processors for Soft Machines.

Soft metamaterials have attracted extensive attention due to their remarkable properties. These materials hold the potential to program and control the morphing behavior of soft machines, however, their combination is limited by the poor reprogrammability of metamaterials and incompatible communication between them. Here, printable and recyclable soft metamaterials possessing reprogrammable embedded intelligence to regulate the morphing of soft machines are introduced. These metamaterials are constructed from interconnected and periodically arranged logic unit cells that are able to perform compound logic operations coupling multiplication and negation. The scalable computation capacity of the unit cell empowers it to simultaneously process multiple fluidic signals with different types and magnitudes, thereby allowing the execution of sophisticated and high-level control operations. By establishing the laws of physical Boolean algebra and formulating a universal design route, soft metamaterials capable of diverse logic operations can be readily created and reprogrammed. Besides, the metamaterials' potential of directly serving as fluidic processors for soft machines is validated by constructing a soft latched demultiplexer, soft controllers capable of universal and customizable morphing programming, and a reprogrammable processor without reconnection. This work provides a facile way to create reprogrammable soft fluidic control systems to meet on-demand requirements in dynamic situations.

GelMA micropattern enhances cardiomyocyte organization, maturation, and contraction via contact guidance.

Cardiac tissue engineering has emerged as a promising approach for restoring the functionality of damaged cardiac tissues following myocardial infarction. To effectively replicate the native anisotropic structure of cardiac tissues in vitro, this study focused on the fabrication of micropatterned gelatin methacryloyl hydrogels with varying geometric parameters. These substrates were evaluated for their ability to guide induced pluripotent stem cell-derived cardiomyocytes (CMs). The findings demonstrate that the mechanical properties of this hydrogel closely resemble those of native cardiac tissues, and it exhibits high fidelity in micropattern fabrication. Micropatterned hydrogel substrates lead to enhanced organization, maturation, and contraction of CMs. A microgroove with 20-µm-width and 20-µm-spacing was identified as the optimal configuration for maximizing the contact guidance effect, supported by analyses of nuclear orientation and F-actin organization. Furthermore, this specific micropattern design was found to promote CMs' maturation, as evidenced by increased expression of connexin 43 and vinculin, along with extended sarcomere length. It also enhanced CMs' contraction, resulting in larger contractile amplitudes and greater contractile motion anisotropy. In conclusion, these results underscore the significant benefits of optimizing micropatterned gelatin methacryloyl for improving CMs' organization, maturation, and contraction. This valuable insight paves the way for the development of highly organized and functionally mature cardiac tissues in vitro.

A laser-engraved wearable gait recognition sensor system for exoskeleton robots.

As a reinforcement technology that improves load-bearing ability and prevents injuries, assisted exoskeleton robots have extensive applications in freight transport and health care. The perception of gait information by such robots is vital for their control. This information is the basis for motion planning in assistive and collaborative functions. Here, a wearable gait recognition sensor system for exoskeleton robots is presented. Pressure sensor arrays based on laser-induced graphene are developed with flexibility and reliability. Multiple sensor units are integrated into an insole to detect real-time pressure at key plantar positions. In addition, the circuit hardware and the algorithm are designed to reinforce the sensor system with the capability of gait recognition. The experimental results show that the accuracy of gait recognition by the proposed system is 99.85%, and the effectiveness of the system is further verified through testing on an exoskeleton robot.

Single-Electrode Electrostatic Repulsion Phenomenon for Remote Actuation and Manipulation.

One of the fundamental principles of electrostatics is that an uncharged object will be attracted to a charged object through electrostatic induction as the two approaches one another. We refer to the charged object as a single electrode and examine the scenario where a positive voltage is applied. Because of electrostatic induction phenomenon, single-electrode electrostatics only generates electrostatic attraction forces. Here, we discover that single-electrode electrostatics can generate electrostatic repulsion forces and define this new phenomenon as single-electrode electrostatic repulsion phenomenon. We investigate the fundamental electrostatic phenomena, giving a curve of electrostatic force versus voltage and then defining 3 regions. Remote actuation and manipulation are essential technologies that are of enormous concern, with tweezers playing an important role. Various tweezers designed on the basis of external fields of optics, acoustics, and magnetism can be used for remote actuation and manipulation, but some inherent drawbacks still exist. Tweezers would benefit greatly from our discovery in electrostatics. On the basis of this discovery, we propose the concept of electrostatic tweezers, which can achieve noncontact and remote actuation and manipulation. Experimental characterizations and successful applications in metamaterials, robots, and manipulating objects demonstrated that electrostatic tweezers can produce large deformation rates (>6,000%), fast actuation (>100 Hz), and remote manipulating distance (~15 cm) and have the advantages of simple device structure, easy control, lightweight, no dielectric breakdown, and low cost. Our work may deepen people's understanding of single-electrode electrostatics and opens new opportunities for remote actuation and manipulation.

Reprogrammable, intelligent soft origami LEGO coupling actuation, computation, and sensing.

Tightly integrating actuation, computation, and sensing in soft materials allows soft robots to respond autonomously to their environments. However, fusing these capabilities within a single soft module in an efficient, programmable, and compatible way is still a significant challenge. Here, we introduce a strategy for integrating actuation, computation, and sensing capabilities in soft origami. Unified and plug-and-play soft origami modules can be reconfigured into diverse morphologies with specific functions or reprogrammed into a variety of soft logic circuits, similar to LEGO bricks. We built an untethered autonomous soft turtle that is able to sense stimuli, store data, process information, and perform swimming movements. The function multiplexing and signal compatibility of the origami minimize the number of soft devices, thereby reducing the complexity and redundancy of soft robots. Moreover, this origami also exhibits strong damage resistance and high durability. We envision that this work will offer an effective way to readily create on-demand soft robots that can operate in unknown environments.

Oral administration microrobots for drug delivery.

Oral administration is the most simple, noninvasive, convenient treatment. With the increasing demands on the targeted drug delivery, the traditional oral treatment now is facing some challenges: 1) biologics how to implement the oral treatment and ensure the bioavailability is not lower than the subcutaneous injections; 2) How to achieve targeted therapy of some drugs in the gastrointestinal tract? Based on these two issues, drug delivery microrobots have shown great application prospect in oral drug delivery due to their characteristics of flexible locomotion or driven ability. Therefore, this paper summarizes various drug delivery microrobots developed in recent years and divides them into four categories according to different driving modes: magnetic-controlled drug delivery microrobots, anchored drug delivery microrobots, self-propelled drug delivery microrobots and biohybrid drug delivery microrobots. As oral drug delivery microrobots involve disciplines such as materials science, mechanical engineering, medicine, and control systems, this paper begins by introducing the gastrointestinal barriers that oral drug delivery must overcome. Subsequently, it provides an overview of typical materials involved in the design process of oral drug delivery microrobots. To enhance readers' understanding of the working principles and design process of oral drug delivery microrobots, we present a guideline for designing such microrobots. Furthermore, the current development status of various types of oral drug delivery microrobots is reviewed, summarizing their respective advantages and limitations. Finally, considering the significant concerns regarding safety and clinical translation, we discuss the challenges and prospections of clinical translation for various oral drug delivery microrobots presented in this paper, providing corresponding suggestions for addressing some existing challenges.

Powerful UAV manipulation via bioinspired self-adaptive soft self-contained gripper.

Existing grippers for unmanned aerial vehicle (UAV) manipulation have persistent challenges, highlighting a need for grippers that are soft, self-adaptive, self-contained, easy to control, and lightweight. Inspired by tendril plants, we propose a class of soft grippers that are voltage driven and based on winding deformation for self-adaptive grasping. We design two types of U-shaped soft eccentric circular tube actuators (UCTAs) and propose using the liquid-gas phase-transition mechanism to actuate UCTAs. Two types of UCTAs are separately cross-arranged to construct two types of soft grippers, forming self-contained systems that can be directly driven by voltage. One gripper inspired by tendril climbers can be used for delicate grasping, and the other gripper inspired by hook climbers can be used for strong grasping. These grippers are ideal for deployment in UAVs because of their self-adaptability, ease of control, and light weight, paving the way for UAVs to achieve powerful manipulation with low positioning accuracy, no complex grasping planning, self-adaptability, and multiple environments.

Programmable Chemical Reactions Enable Ultrastrong Soft Pneumatic Actuation.

Soft pneumatic actuation is widely used in wearable devices, soft robots, artificial muscles, and surgery machines. However, generating high-pressure gases in a soft, controllable, and portable way remains a substantial challenge. Here, a class of programmable chemical reactions that can be used to controllably generate gases with a maximum pressure output of nearly 6 MPa is reported. It is proposed to realize the programmability of the chemical reaction process using thermoelectric material with programmable electric current and employing preprogrammed reversible chemical reactants. The programmable chemical reactions as soft pneumatic actuation can be operated independently as miniature gas sources (∼20-100 g) or combined with arbitrary physical structures to make self-contained machines, capable of generating unprecedented pressures of nearly 6 MPa or forces of about 18 kN in a controllable, portable, and silent manner. Striking demonstrations of breaking a brick, a marble, and concrete blocks, raising a sightseeing car, and successful applications in artificial muscles and soft assistive wearables illustrate tremendous application prospects of soft pneumatic actuation via programmable chemical reactions. The study establishes a new paradigm toward ultrastrong soft pneumatic actuation.

Robotic wireless capsule endoscopy: recent advances and upcoming technologies.

Wireless capsule endoscopy (WCE) offers a non-invasive evaluation of the digestive system, eliminating the need for sedation and the risks associated with conventional endoscopic procedures. Its significance lies in diagnosing gastrointestinal tissue irregularities, especially in the small intestine. However, existing commercial WCE devices face limitations, such as the absence of autonomous lesion detection and treatment capabilities. Recent advancements in micro-electromechanical fabrication and computational methods have led to extensive research in sophisticated technology integration into commercial capsule endoscopes, intending to supersede wired endoscopes. This Review discusses the future requirements for intelligent capsule robots, providing a comparative evaluation of various methods' merits and disadvantages, and highlighting recent developments in six technologies relevant to WCE. These include near-field wireless power transmission, magnetic field active drive, ultra-wideband/intrabody communication, hybrid localization, AI-based autonomous lesion detection, and magnetic-controlled diagnosis and treatment. Moreover, we explore the feasibility for future "capsule surgeons".

Machine Learning-Enabled Tactile Sensor Design for Dynamic Touch Decoding.

Skin-like flexible sensors play vital roles in healthcare and human-machine interactions. However, general goals focus on pursuing intrinsic static and dynamic performance of skin-like sensors themselves accompanied with diverse trial-and-error attempts. Such a forward strategy almost isolates the design of sensors from resulting applications. Here, a machine learning (ML)-guided design of flexible tactile sensor system is reported, enabling a high classification accuracy (≈99.58%) of tactile perception in six dynamic touch modalities. Different from the intuition-driven sensor design, such ML-guided performance optimization is realized by introducing a support vector machine-based ML algorithm along with specific statistical criteria for fabrication parameters selection to excavate features deeply concealed in raw sensing data. This inverse design merges the statistical learning criteria into the design phase of sensing hardware, bridging the gap between the device structures and algorithms. Using the optimized tactile sensor, the high-quality recognizable signals in handwriting applications are obtained. Besides, with the additional data processing, a robot hand assembled with the sensor is able to complete real-time touch-decoding of an 11-digit braille phone number with high accuracy.

3D bioprinting as a prospective therapeutic strategy for corneal limbal epithelial stem cell deficiency.

Limbal epithelial stem cells (LESCs) are responsible for the maintenance and repair of the corneal surface. Injuries and diseases of the eye may result in a vision condition called limbal stem cell deficiency (LSCD). Without limbal stem cells, the cornea becomes opaque, vascularized, and inflamed. Cultured LESC therapy as a treatment method was first described in 1997, and LESCs cultured from either patients or donors have been used to treat LSCD successfully. However, the main source of cornea for LSCD treatment is from donors, which are too few to meet the demand (less than 1:70 of cases). The global shortage of donor cornea promotes the need for studies exploring corneal limbus alternatives. Many problems still remain unresolved, such as original geometry reconstruction, corneal epithelial regeneration, and ocular optical function restoration. 3D bioprinting has garnered tremendous attention in recent years, and significant advances have been made in fabricating cell-laden scaffolds. These advancements could lead to a promising treatment for LSCD. It is possible that alternative limbus stem cells can be constructed using 3D printing, which, in corneal limbus regeneration, enables personalized corneal implants and fabrication of single- or multilayer corneal limbus equivalents with corneal limbal stem cells. In this review, the progress, applications, and limitations of the most influential works regarding current treatments of LESC deficiency are discussed. The advantages of 3D bioprinting are illustrated, and some first promising steps toward the creation of a functional cornea limbus with 3D bioprinting are discussed. Finally, insights into the prospects and technical challenges facing the future research of 3D bioprinting of corneal limbus alternatives in vivo and in vitro are provided.

Liquid-Phase Integrated 3D Printed Biological Lenses for Lamellar Corneal Substitute.

Compared to traditional biological lenses that are used to correct optical systems, such as contact lenses, vision correction surgery, and corneal and lens replacement, 3D printed biological lenses offer a customizable solutions. However, the layer-by-layer principle of 3D printing leads to a staircase effect, which cannot meet the critical requirements of surface quality during the manufacturing process of biological lens, particularly with soft materials. Here, a liquid-phase printing strategy and a surface tension-dependent (STD) post-processing method are proposed that use the surface tension of the liquid to reconstruct the air-liquid interface. This eliminates the staircase effect caused by the stacking of units during 3D printing. The coordinates of integrated printing enable high-accuracy shape control of soft materials. Using a typical biological lens as an example, this method improves the surface quality of printed lamellar corneal substitutes (LCS) from ±20.0 to ±0.2 µm and reduces thickness feature size from ±500 to ±150 µm. This approach can match human cornea curvature and thickness, achieving ≈85% visible light transmittance and biocompatibility. Liquid-phase 3D printed biological lenses outperform molded ones in animal experiments. This method can advance artificial biological lens printing research and holds promise for future clinical applications.

Phase-transforming mechanical metamaterials with dynamically controllable shape-locking performance.

Active mechanical metamaterials with customizable structures and deformations, active reversible deformation, dynamically controllable shape-locking performance and stretchability are highly suitable for applications in soft robotics and flexible electronics, yet it is challenging to integrate them due to their mutual conflicts. Here, we introduce a class of phase-transforming mechanical metamaterials (PMMs) that integrate the above properties. Periodically arranging basic actuating units according to the designed pattern configuration and positional relationship, PMMs can customize complex and diverse structures and deformations. Liquid-vapor phase transformation provides active reversible large deformation while a silicone matrix offers stretchability. The contained carbonyl iron powder endows PMMs with dynamically controllable shape-locking performance, thereby achieving magnetically assisted shape locking and energy storing in different working modes. We build a theoretical model and finite element simulation to guide the design process of PMMs, so as to develop a variety of PMMs with different functions suitable for different applications, such as a programmed PMM, reconfigurable antenna, soft lens, soft mechanical memory, biomimetic hand, biomimetic flytrap and self-contained soft gripper. PMMs are applicable to achieve various 2D deformations and 2D-to-3D deformations, and integrate multiple properties, including customizable structures and deformations, active reversible deformation, rapid reversible shape locking, adjustable energy storing and stretchability, which could open a new application avenue in soft robotics and flexible electronics.

Customized bioceramic scaffolds and metal meshes for challenging large-size mandibular bone defect regeneration and repair.

Large-size mandible graft has huge needs in clinic caused by infection, tumor, congenital deformity, bone trauma and so on. However, the reconstruction of large-size mandible defect is challenged due to its complex anatomical structure and large-range bone injury. The design and fabrication of porous implants with large segments and specific shapes matching the native mandible remain a considerable challenge. Herein, the 6% Mg-doped calcium silicate (CSi-Mg6) and ß- and α-tricalcium phosphate (ß-TCP, α-TCP) bioceramics were fabricated by digital light processing as the porous scaffolds of over 50% in porosity, while the titanium mesh was fabricated by selective laser melting. The mechanical tests showed that the initial flexible/compressive resistance of CSi-Mg6 scaffolds was markedly higher than that of ß-TCP and α-TCP scaffolds. Cell experiments showed that these materials all had good biocompatibility, while CSi-Mg6 significantly promoted cell proliferation. In the rabbit critically sized mandible bone defects (∼13 mm in length) filled with porous bioceramic scaffolds, the titanium meshes and titanium nails were acted as fixation and load bearing. The results showed that the defects were kept during the observation period in the blank (control) group; in contrast, the osteogenic capability was significantly enhanced in the CSi-Mg6 and α-TCP groups in comparison with the ß-TCP group, and these two groups not only had significantly increased new bone formation but also had thicker trabecular and smaller trabecular spacing. Besides, the CSi-Mg6 and α-TCP groups showed appreciable material biodegradation in the later stage (from 8 to 12 weeks) in comparison with the ß-TCP scaffolds while the CSi-Mg6 group showed much outstanding mechanical capacity in vivo in the early stage compared to the ß-TCP and α-TCP groups. Totally, these findings suggest that the combination of customized strength-strong bioactive CSi-Mg6 scaffolds together with titanium meshes is a promising way for repairing the large-size load-bearing mandible defects.

Self-protection soft fluidic robots with rapid large-area self-healing capabilities.

Soft fluidic robots have attracted a lot of attention and have broad application prospects. However, poor fluidic power source and easy to damage have been hindering their development, while the lack of intelligent self-protection also brings inconvenience to their applications. Here, we design diversified self-protection soft fluidic robots that integrate soft electrohydrodynamic pumps, actuators, healing electrofluids, and E-skins. We develop high-performance soft electrohydrodynamic pumps, enabling high-speed actuation and large deformation of untethered soft fluidic robots. A healing electrofluid that can form a self-healed film with excellent stretchability and strong adhesion is synthesized, which can achieve rapid and large-areas-damage self-healing of soft materials. We propose multi-functional E-skins to endow robots intelligence, making robots realize a series of self-protection behaviors. Moreover, our robots allow their functionality to be enhanced by the combination of electrodes or actuators. This design strategy enables soft fluidic robots to achieve their high-speed actuation and intelligent self-protection, opening a door for soft robots with physical intelligence.

A novel design of spiral groove bearing in a hydrodynamically levitated centrifugal rotary blood pump.

Good washout is very important in spiral groove bearing (SGB) designs when applied to blood pumps due to the micrometer scales of lubrication films and groove depths. To improve washout, flow rate or leakage through SGBs should be as large as possible. However, this special goal violates conventional SGB designs in which no leakage is desired as the leakage would decrease load-carrying capacity significantly. So, a design concept is formed fulfilling the two goals of high load-carrying capacity and large flow rate: let groove width decrease along flow path and the mating surface of the rotor rotate with a direction facilitating the flow through the grooves. Under this concept, a novel SGB is designed, contrary to conventional ones, with groove width decreasing with increasing spiral radius. This SGB is mounted on the motionless upper plate of our designed centrifugal blood pump, with the mating surface of rotor rotating with a direction facilitating the outward flow. To assess SGB designs, a characteristic plane is originally presented relating to pressure-normalized load-carrying capacity and flow rate. Comparisons between various kinds of SGB designs are made, and computational fluid dynamics (CFD) results are plotted in this characteristic plane from which load/flow performances can be directly read out. CFD and comparison results show that the new designs have superior load/flow characteristics. However, the impact of SGB designs upon hemolysis/thrombus formation is still to be verified according to the concept presented.

4-[(2'-Cyano-biphenyl-4-yl)meth-yl]morpholin-4-ium perchlorate.

In the title salt, C(18)H(19)N(2)O(+)·ClO(4) (-), the morpholinium ring adopts a chair conformation, while the two benzene rings make a dihedral angle of 62.65 (17)°. Inter-molecular N-H⋯N hydrogen bonds and weak C-H⋯O inter-actions occur in the crystal structure.

Multifunctional Flexible Humidity Sensor Systems Towards Noncontact Wearable Electronics.

In the past decade, the global industry and research attentions on intelligent skin-like electronics have boosted their applications in diverse fields including human healthcare, Internet of Things, human-machine interfaces, artificial intelligence and soft robotics. Among them, flexible humidity sensors play a vital role in noncontact measurements relying on the unique property of rapid response to humidity change. This work presents an overview of recent advances in flexible humidity sensors using various active functional materials for contactless monitoring. Four categories of humidity sensors are highlighted based on resistive, capacitive, impedance-type and voltage-type working mechanisms. Furthermore, typical strategies including chemical doping, structural design and Joule heating are introduced to enhance the performance of humidity sensors. Drawing on the noncontact perception capability, human/plant healthcare management, human-machine interactions as well as integrated humidity sensor-based feedback systems are presented. The burgeoning innovations in this research field will benefit human society, especially during the COVID-19 epidemic, where cross-infection should be averted and contactless sensation is highly desired.