Analyses of integrated EPID images for on-treatment quality assurance to account for interfractional variations in volumetric modulated arc therapy.

PURPOSE: To investigate the effects of interfractional variation, such as anatomical changes and setup errors, on dose delivery during treatment for prostate cancer (PC) and head and neck cancer (HNC) by courses of volumetric modulated arc therapy (VMAT) aided by on-treatment electronic portal imaging device (EPID) images. METHODS: Seven patients with PC and 20 patients with HNC who had received VMAT participated in this study. After obtaining photon fluence at the position of the EPID for each treatment arc from on-treatment integrated EPID images, we calculated the differences between the fluence for the first fraction and each subsequent fraction for each arc. The passing rates were investigated based on a tolerance level of 3% of the maximum fluence during the treatment courses and the correlations between the passing rates and anatomical changes. RESULTS: In PC, the median and lowest passing rates were 99.8% and 95.2%, respectively. No correlations between passing rates and interfractional variation were found. In HNC, the median passing rate of all fractions was 93.0%, and the lowest passing rate was 79.6% during the 35th fraction. Spearman's correlation coefficients between the passing rates and changes in weight or neck volume were - 0.77 and - 0.74, respectively. CONCLUSIONS: Analyses of the on-treatment EPID images facilitates estimates of the interfractional anatomical variation in HNC patients during VMAT and thus improves assessments of the need for re-planning or adaptive strategies and the timing thereof.

Variation in target volume and centroid position due to breath holding during four-dimensional computed tomography scanning: A phantom study.

This study investigated the effects of respiratory motion, including unwanted breath holding, on the target volume and centroid position on four-dimensional computed tomography (4DCT) imaging. Cine 4DCT images were reconstructed based on a time-based sorting algorithm, and helical 4DCT images were reconstructed based on both the time-based sorting algorithm and an amplitude-based sorting algorithm. A spherical object 20 mm in diameter was moved according to several simulated respiratory motions, with a motion period of 4.0 s and maximum amplitude of 5 mm. The object was extracted automatically, and the target volume and centroid position in the craniocaudal direction were measured using a treatment planning system. When the respiratory motion included unwanted breath-holding times shorter than the breathing cycle, the root mean square errors (RSME) between the reference and imaged target volumes were 18.8%, 14.0%, and 5.5% in time-based images in cine mode, time-based images in helical mode, and amplitude-based images in helical mode, respectively. In helical mode, the RSME between the reference and imaged centroid position was reduced from 1.42 to 0.50 mm by changing the reconstruction method from time- to amplitude-based sorting. When the respiratory motion included unwanted breath-holding times equal to the breathing cycle, the RSME between the reference and imaged target volumes were 19.1%, 24.3%, and 15.6% in time-based images in cine mode, time-based images in helical mode, and amplitude-based images in helical mode, respectively. In helical mode, the RSME between the reference and imaged centroid position was reduced from 1.61 to 0.83 mm by changing the reconstruction method from time- to amplitude-based sorting. With respiratory motion including breath holding of shorter duration than the breathing cycle, the accuracies of the target volume and centroid position were improved by amplitude-based sorting, particularly in helical 4DCT.

Optimization of Couch Modeling in the Change of Dose Calculation Methods and Their Versions.

In external radiotherapy, the X-ray beam passes through the treatment couch, leading to the dose reduction by the attenuation of the couch. As a method to compensate for the reduction, radiation treatment planning systems (RTPS) support virtual couch function, namely "couch modeling method". In the couch modeling method, the computed tomography (CT) numbers assigned to each structure should be optimized by comparing calculations to measurements for accurate dose calculation. Thus, re-optimization of CT numbers will be required when the dose calculation algorithm or their version changes. The purpose of this study is to evaluate the calculation accuracy of the couch modeling method in different calculation algorithms and their versions. The optimal CT numbers were determined by minimizing the difference between measured transmission factors and calculated ones. When CT numbers optimized by Anisotropic Analytical Algorithm (AAA) Ver. 8.6 were used, the maximum and the mean difference of transmission factor were 5.8% and 1.5%, respectively, for Acuros XB (AXB) Ver. 11.0. However, when CT numbers optimized by AXB Ver. 11.0 were used, they were 2.6% and 0.6%, respectively. The CT numbers for couch structures should be optimized when changing dose calculation algorithms and their versions. From the comparison of the measured transmission to calculation, it was found that the CT numbers had high accuracy.

Dosimetric Verification around High-density Materials for External Beam Radiotherapy.

It is generally known that the dose distribution around the high-density materials is not accurate with commercially available radiation treatment planning systems (RTPS). Recently, Acuros XB (AXB) has been clinically available for dose calculation algorithm. The AXB is based on the linear Boltzmann transport equation - the governing equation - that describes the distribution of radiation particles resulting from their interactions with matter. The purpose of this study was to evaluate the dose calculation accuracy around high-density materials for AXB under three X-rays energy on the basis of measured values with EBT3 and compare AXB with various dose calculation algorithms (AAA, XVMC) in RTPS and Monte Carlo. First, two different metals, including titanium and stainless steel, were inserted at the center of a water-equivalent phantom, and the depth dose was measured with EBT3. Next, after a phantom which reproduced the geometry of measurement was virtually created in RTPS, dose distributions were calculated with three commercially available algorithms (AXB, AAA, and XVMC) and MC. The calculated doses were then compared with the measured ones. As a result, compared to other algorithms, it was found that the dose calculation accuracy of AXB at the exit side of high-density materials was comparable to that of MC and measured value with EBT3. However, note that AXB underestimated the dose up to approximately 30% at the plane of incidence because it cannot exactly estimate the impact of the backscatter.

Interfraction positional variation in pancreatic tumors using daily breath-hold cone-beam computed tomography with visual feedback.

We assessed interfraction positional variation in pancreatic tumors using daily breath-hold cone-beam computed tomography at end-exhalation (EE) with visual feedback (BH-CBCT). Eleven consecutive patients with pancreatic cancer who underwent BH intensity-modulated radiation therapy with visual feedback were enrolled. All participating patients stopped oral intake, with the exception of drugs and water, for > 3 hr before treatment planning and daily treatment. Each patient was fixed in the supine position on an individualized vacuum pillow. An isotropic margin of 5 mm was added to the clinical target volume to create the planning target volume (PTV). The prescription dose was 42 to 51 Gy in 15 fractions. After correcting initial setup errors based on bony anatomy, the first BH-CBCT scans were performed before beam delivery in every fraction. BH-CBCT acquisition was obtained in three or four times breath holds by interrupting the acquisition two or three times, depending on the patient's BH ability. The image acquisition time for a 360° gantry rotation was approximately 90 s, including the interruption time due to BH. The initial setup errors were corrected based on bony structure, and the residual errors in the target position were then recorded. The magnitude of the interfraction variation in target position was assessed for 165 fractions. The systematic and random errors were 1.2 and 1.8 mm, 1.1 and 1.8 mm, and 1.7 and 2.9 mm in the left-right (LR), anterior-posterior (AP), and superior-inferior (SI) directions, respectively. Absolute interfraction variations of > 5 mm were observed in 18 fractions (11.0%) from seven patients because of EE-BH failure. In conclusion, target matching is required to correct interfraction variation even with visual feedback, especially to ensure safe delivery of escalated doses to patients with pancreatic cancer.

[Use of surgical clips to verify positional accuracy in image-guided accelerated partial breast irradiation].

The purpose of this study was to evaluate the accuracy of positional verification during overall radiation treatment periods in accelerated partial breast irradiation using one or more surgical clips. We first investigated the appropriate computed tomography (CT) slice thickness and detectability of clips for a matching criterion in a phantom study. Next, clinical investigations were carried on 12 patients with multiple clips positioned around the lumpectomy cavity. During radiation treatment planning, a 5-mm region of interest (5-mm ROI) was defined by adding a three dimentional (3D) margin of 5 mm to each clip. During treatment, the clips on two orthogonal kilovoltage X-ray images acquired were moved so as to be included in the corresponding 5-mm ROI on digitally reconstructed radiographs (DRRs). Positional accuracy was calculated using the displacement of each clip in the verification images. The displacements of each clip acquired in all setups were then calculated throughout the overall radiation treatment period and the factors affecting the displacement of clips were investigated. Positional accuracy was also investigated in setups using skin marks and in setups using the bone structure around the thorax. We demonstrated in a phantom study that a CT slice thickness of 2.5 mm was appropriate. In our clinical investigations, 91% of the clips were included in the 5-mm ROI. The interfractional displacement of clips was large, with a long distance between the isocenter and each clip at the time of radiation treatment planning.

Questionnaire survey on treatment planning techniques for lung stereotactic body radiotherapy in Japan.

This study aimed to obtain details regarding treatment planning techniques for lung stereotactic body radiation therapy (SBRT) employed at each institution in Japan by using a questionnaire survey. An Internet questionnaire survey on SBRT procedures performed in 2016 was conducted by the QA/QC committee of the Japan Society of Medical Physics from April to June 2017. The questionnaire assessed two aspects: the environment for SBRT at each institution and the treatment planning techniques with and without respiratory motion management techniques (RMMT). Of the 309 evaluated responses, 218 institutions had performed SBRT. A total of 186 institutions performed SBRT without RMMT and 139 institutions performed SBRT with RMMT. When respiratory motion was ≥10 mm, 69 institutions applied RMMT. The leading RMMT were breath holding (77 institutions), respiratory gating (49 institutions) and real-time tumor tracking (11 institutions). The most frequently used irradiation technique was 3D conformal radiotherapy, which was used in 145 institutions without RMMT and 119 institutions with RMMT. Computed tomography (CT) images acquired under free breathing were mostly used for dose calculation for patients treated without RMMT. The usage ratio of IMRT/VMAT to SBRT is low in Japan, compared to elsewhere in the world (<20% vs ≥70%). Among the available dose calculation algorithms, superposition convolution was the most frequently used regardless of RMMT; however, 2% of institutions have not yet made heterogeneity corrections. In the prescription setting, about half of the institutions applied point prescriptions. The survey results revealed the most frequently used conditions, which may facilitate standardization of treatment techniques in lung SBRT.

Stereotactic body radiotherapy for oligometastatic lung tumors.

PURPOSE: Since 1998, we have treated primary and oligometastatic lung tumors with stereotactic body radiotherapy (SBRT). The term "oligometastasis" is used to indicate a small number of metastases limited to an organ. We evaluated our clinical experience of SBRT for oligometastatic lung tumors. METHODS AND MATERIALS: A total of 34 patients with oligometastatic lung tumors were included in this study. The primary involved organs were the lung (n = 15), colorectum (n = 9), head and neck (n = 5), kidney (n = 3), breast (n = 1), and bone (n = 1). Five to seven, noncoplanar, static 6-MV photon beams were used to deliver 48 Gy (n = 18) or 60 Gy (n = 16) at the isocenter, with 12 Gy/fraction within 4-18 days (median, 12 days). RESULTS: The overall survival rate, local relapse-free rate, and progression-free rate at 2 years was 84.3%, 90.0%, and 34.8%, respectively. No local progression was observed in tumors irradiated with 60 Gy. SBRT-related pulmonary toxicities were observed in 4 (12%) Grade 2 cases and 1 (3%) Grade 3 case. Patients with a longer disease-free interval had a greater overall survival rate. CONCLUSION: The clinical result of SBRT for oligometastatic lung tumors in our institute was comparable to that after surgical metastasectomy; thus, SBRT could be an effective treatment of pulmonary oligometastases.

Geometrical differences in target volumes between slow CT and 4D CT imaging in stereotactic body radiotherapy for lung tumors in the upper and middle lobe.

Since stereotactic body radiotherapy (SBRT) was started for patients with lung tumor in 1998 in our institution, x-ray fluoroscopic examination and slow computed tomography (CT) scan with a rotation time of 4 s have been routinely applied to determine target volumes. When lung tumor motion observed with x-ray fluoroscopy is larger than 8 mm, diaphragm control (DC) is used to reduce tumor motion during respiration. After the installation of a four-dimensional (4D) CT scanner in 2006, 4D CT images have been supplementarily acquired to determine target volumes. It was found that target volumes based on slow CT images were substantially different from those on 4D CT images, even for patients with lung tumor motion no larger than 8 mm. Although slow CT scan might be expected to fare well for lung tumors with motion range of 8 mm or less, the potential limitations of slow CT scan are unknown. The purpose of this study was to evaluate the geometrical differences in target volumes between slow CT and 4D CT imaging for lung tumors with motion range no larger than 8 mm in the upper and middle lobe. Of the patients who underwent SBR between October 2006 and April 2008, 32 patients who had lung tumor with motion range no larger than 8 mm and did not need to use DC were enrolled in this study. Slow CT and 4D CT images were acquired under free breathing for each patient. Target volumes were manually delineated on slow CT images (TV(slow CT)). Gross tumor volumes were also delineated on each of the 4D CT volumes and their union (TV(4D CT)) was constructed. Volumetric and statistical analyses were performed for each patient. The mean +/- standard deviation (S.D.) of TV(slow CT)/TV(4D CT) was 0.75 +/- 0.17 (range, 0.38-1.10). The difference between sizes of TV(slow CT) and TV(4D CT) was not statistically significant (P = 0.096). A mean of 8% volume of TV(slow CT) was not encompassed in TV(4D CT) (mean +/- S.D. = 0.92 +/- 0.07). The patients were separated into two groups to test whether the quality of target delineation on slow CT scans depends on respiratory periods below or above the CT rotation time of 4 s. No significant difference was observed between these groups (P = 0.229). Even lung tumors with motion range no larger than 8 mm might not be accurately depicted on slow CT images. When only a single slow CT scan was used for lung tumors with motion range of 8 mm or less, 95% confidence values for additional margins for TV(slow CT) to encompass TV(4D CT) were 4.0, 5.4, 4.9, 5.1, 1.8, and 1.7 mm for lateral, medial, ventral, dorsal, cranial, and caudal directions, respectively.

[Evaluation of a method for correcting systematic setup error in external-beam radiation therapy].

BACKGROUND AND PURPOSE: We verified the propriety of our systematic error reduction strategy by means of a computer simulation based on our data of position error with a prone fixation device for prostate IMRT. MATERIALS AND METHODS: Computer simulations of the off-line correction method for systematic setup errors based on the portal imaging taken on the first several days of the treatment session were performed. Using the computer simulations, an optimal number of portal images were evaluated for the SD value, from 0.5 mm to 1.5 mm at a 0.25 mm interval, and the respective required setup margins were calculated. RESULTS: The value of systematic error was reduced as the frequency of data obtained increased. Moreover, the reduction rate was so remarkable that random error was large.

A Case of Recurrent Esophageal Cancer Treated with Concurrent Chemoradiation Therapy in Pregnancy.

Esophageal cancer rarely coincides with pregnancy, and only five cases have been reported thus far. The management of esophageal cancer during pregnancy is extremely challenging due to its aggressive nature. We herein report a case of recurrent esophageal cancer in pregnancy. A 41-year-old multigravida with a history of esophageal squamous cell cancer treated with esophagectomy and perioperative chemotherapy was diagnosed with local recurrent carcinoma of the residual esophagus at 16 weeks of gestation. The patient strongly desired to continue the pregnancy, and concurrent chemoradiation therapy (CRT) consisting of 50.4 Gy of radiation, cisplatin, and 5-fluorouracil was carried out from 19 weeks of gestation. CRT was dramatically effective, and the recurrent lesion disappeared. At 38 weeks of gestation, she underwent cesarean section and delivered a healthy female baby. Both maternal and fetal courses were satisfactory, and the patient has been free of disease for 12 months. This is the first case of recurrent esophageal cancer in pregnancy in which CRT was completed without reducing treatment intensity and led to a complete response. Nevertheless, little is known regarding the safety and possible adverse effects of CRT on the fetus. Therefore, deliberate selection of patients and long-term follow-up of the child are necessary.

Evaluation of Dynamic Tumor-tracking Intensity-modulated Radiotherapy for Locally Advanced Pancreatic Cancer.

Intensity-modulated radiotherapy (IMRT) is now regarded as an important treatment option for patients with locally advanced pancreatic cancer (LAPC). To reduce the underlying tumor motions and dosimetric errors during IMRT as well as the burden of respiratory management for patients, we started to apply a new treatment platform of the dynamic tumor dynamic tumor-tracking intensity-modulated radiotherapy (DTT-IMRT) using the gimbaled linac, which can swing IMRT toward the real-time tumor position under patients' voluntary breathing. Between June 2013 and March 2015, ten patients were treated, and the tumor-tracking accuracy and the practical benefits were evaluated. The mean PTV size in DTT-IMRT was 18% smaller than a conventional ITV-based PTV. The root-mean-squared errors between the predicted and the detected tumor positions were 1.3, 1.2, and 1.5 mm in left-right, anterior-posterior, and cranio-caudal directions, respectively. The mean in-room time was 24.5 min. This high-accuracy of tumor-tracking with reasonable treatment time are promising and beneficial to patients with LAPC.

Sensitivity characteristic that uses optical filters in GafChromic radiation dosimetry.

GafChromic EBT film (GC-EBT) is lower in sensitivity than ready-pack film. The purpose of this study was to increase GC-EBT sensitivity by using band-pass filters and a polarized light filter. The filters were inserted between the GC-EBT and the scanner bed and digitized. We evaluated the sensitivity characteristic, amount of noise, and the dose corresponding to noise. When only the band-pass filter was inserted, a filter of transmission wavelength peak at 600 nm showed the maximum sensitivity. When a filter of 600 nm in transmission peak at wavelength was combined with a polarized light filter, sensitivity improved. There was no increase in the amount of noise according to the type of filter. The dose corresponding to noise increased as the quantity of light after passing through the filter decreased. When a suitable band-pass filter for the absorption peak of GC-EBT was used, it was suggested to be able to improve sensitivity without increasing noise.

Use of a second-dose calculation algorithm to check dosimetric parameters for the dose distribution of a first-dose calculation algorithm for lung SBRT plans.

PURPOSE: To verify lung stereotactic body radiotherapy (SBRT) plans using a secondary treatment planning system (TPS) as an independent method of verification and to define tolerance levels (TLs) in lung SBRT between the primary and secondary TPSs. METHODS: A total of 147 lung SBRT plans calculated using X-ray voxel Monte Carlo (XVMC) were exported from iPlan to Eclipse in DICOM format. Dose distributions were recalculated using the Acuros XB (AXB) and the anisotropic analytical algorithm (AAA), while maintaining monitor units (MUs) and the beam arrangement. Dose to isocenter and dose-volumetric parameters, such as D2, D50, D95 and D98, were evaluated for each patient. The TLs of all parameters between XVMC and AXB (TLAXB) and between XVMC and AAA (TLAAA) were calculated as the mean±1.96 standard deviations. RESULTS: AXB values agreed with XVMC values within 3.5% for all dosimetric parameters in all patients. By contrast, AAA sometimes calculated a 10% higher dose in PTV D95 and D98 than XVMC. The TLAXB and TLAAA of the dose to isocenter were -0.3±1.4% and 0.6±2.9%, respectively. Those of D95 were 1.3±1.8% and 1.7±3.6%, respectively. CONCLUSIONS: This study quantitatively demonstrated that the dosimetric performance of AXB is almost equal to that of XVMC, compared with that of AAA. Therefore, AXB is a more appropriate algorithm for an independent verification method for XVMC.

Three-dimensional intrafractional internal target motions in accelerated partial breast irradiation using three-dimensional conformal external beam radiotherapy.

PURPOSE: We evaluated three-dimensional intrafractional target motion, divided into respiratory-induced motion and baseline drift, in accelerated partial breast irradiation (APBI). METHODS: Paired fluoroscopic images were acquired simultaneously using orthogonal kV X-ray imaging systems at pre- and post-treatment for 23 patients who underwent APBI with external beam radiotherapy. The internal target motion was calculated from the surgical clips placed around the tumour cavity. RESULTS: The peak-to-peak respiratory-induced motions ranged from 0.6 to 1.5mm in all directions. A systematic baseline drift of 1.5mm towards the posterior direction and a random baseline drift of 0.3mm in the lateral-medial and cranial-caudal directions were observed. The baseline for an outer tumour cavity drifted towards the lateral and posterior directions, and that for an upper tumour cavity drifted towards the cranial direction. Moderate correlations were observed between the posterior baseline drift and the patients' physical characteristics. The posterior margin for intrafractional uncertainties was larger than 5mm in patients with greater fat thickness due to the baseline drift. CONCLUSIONS: The magnitude of the intrafractional motion was not uniform according to the direction, patients' physical characteristics, or tumour cavity location due to the baseline drift. Therefore, the intrafractional systematic movement should be properly managed.

Influence of radiation dose rate and lung dose on interstitial pneumonitis after fractionated total body irradiation: acute parotitis may predict interstitial pneumonitis.

This study evaluated patients for the influence of the dose rate and lung dose of fractionated total body irradiation (TBI) in preparation for allogeneic bone marrow transplantation (BMT) on the subsequent development of interstitial pneumonitis (IP). Sixty-six patients at our institute were treated with TBI followed by BMT. All of the patients received a total TBI dose of 12 Gy given in 6 fractions over 3 days and were divided into 3 groups according to the radiation dose rate and lung dose: group A, lung dose of 8 Gy (n = 18); group B, lung dose of 12 Gy at 8 cGy/min (n = 25); and group C, lung dose of 12 Gy at 19 cGy/min (n = 23). The overall survival rate, the cumulative incidence of relapse, and the cumulative incidence of IP were evaluated in relation to various potential indicators of future IP. There were no significant differences in survival and relapse rates between patient group A and combined groups B and C. Clinically significant IP occurred in 13 patients. The cumulative incidence of IP was significantly higher in patients who developed acute parotitis as indicated by either an elevation in the serum amylase level or parotid pain of grade 1 to 2. There was no difference in IP incidence among groups A, B, and C. There was no significant difference in IP incidence between lung dose values of 8 Gy (with lung shielding) and 12 Gy (without lung shielding) and between dose rate values of 8 cGy/min and 19 cGy/ min, at least when TBI was given in 6 fractions. The presence of acute parotitis during or just after TBI may be a predictor of IP.

[Stereotactic body radiotherapy (SBRT)].

The techniques of three-dimensional conformal radiotherapy (3 D-CRT) and patient immobilization have recently been developed, enabling us to focus high doses on the target with relatively less irradiation of normal tissues. In radiotherapy for solitary lung tumors, the local control may be safely improved by delivering a higher dose at only the target volume using these techniques. Recently, several clinical studies on stereotactic body radiotherapy (SRT) using the 3 D-CRT technique for solitary lung tumors have been reported. The single dose used is 10-15 Gy, and the total sessions are three to five. The local control rate is more than 90% and complication rates are very low. Therefore, this treatment is a promising new non-invasive treatment for early stage lung cancer. A multi-institutional clinical study, JCOG 0403, in now underway.

[Evaluation of setup error and adequate setup margins in patients with prostate cancer treated by IMRT and fixed in the prone position using a set of immobilization devices].

PURPOSE: Positional reproducibility in patients with prostate cancer fixed in the prone position with a set of immobilization devices for external-beam intensity-modulated radiation therapy (IMRT) was evaluated. In addition, the adequacy of our positional error reduction strategy and current planning target volume (PTV) margins was also evaluated. RESULTS: Systematic error was corrected by the positional correction that we executed at the first stage of irradiation. The setup margin that we had calculated was 1.1 mm in the L-R direction, 1.3 mm in the A-P direction, and 2.7 mm in the C-C direction. CONCLUSION: We determined that the effectiveness of the method of correcting the error margin and the setup accuracy of the fixed method were well maintained.

Treatment planning of stereotactic radiotherapy for solitary lung tumor.

PURPOSE: To analyze the stereotactic radiotherapy (SRT) plans in terms of internal target volume (ITV) and organs at risk (OARs). METHODS AND MATERIALS: Treatment planning and dose distributions were analyzed using dose-volume histograms (DVHs) of ITV and OARs in 37 patients, who were treated for a solitary lung tumor with SRT. The stereotactic body frame (SBF) was used for immobilization and accurate setup. Prescription dose was 48 Gy in four fractions at the isocenter. RESULTS: Use of SBF limits the extent of the noncoplanar beam directions to prevent a collision with the Linac gantry. DVH analyses showed that the homogeneity index, defined as the ratio of maximum and minimum dose to ITV, ranged from 1.03 to 1.25 (mean, 1.12). The volume irradiated with 20 Gy or more (V(20)) of the lung ranged from 0.3 to 11.6% (mean, 4.4%) of the whole lung volume. The maximum dose to the other OARs ranged from 0 to 11.8 Gy (mean, 0.5-2.7) per fraction. No clinically significant complications were encountered. CONCLUSIONS: Despite the limitation of the beam arrangement, a homogeneous target dose distribution, while avoiding high doses to normal tissues, was obtained.

Clinical outcomes of a phase I/II study of 48 Gy of stereotactic body radiotherapy in 4 fractions for primary lung cancer using a stereotactic body frame.

PURPOSE: To evaluate the clinical outcomes of 48 Gy of three-dimensional stereotactic radiotherapy in four fractions for treating Stage I lung cancer using a stereotactic body frame. METHODS AND MATERIALS: Forty-five patients who were treated between September 1998 and February 2004 were included in this study. Thirty-two patients had Stage IA lung cancer, and the other 13 had Stage IB lung cancer where tumor size was less than 4 cm in diameter. Three-dimensional treatment planning using 6-10 noncoplanar beams was performed to maintain the target dose homogeneity and to decrease the irradiated lung volume >20 Gy. All patients were irradiated using a stereotactic body frame and received four single 12 Gy high doses of radiation at the isocenter over 5-13 (median = 12) days. RESULTS: Seven tumors (16%) completely disappeared after treatment (CR) and 38 tumors (84%) decreased in size by 30% or more (PR). Therefore, all tumors showed local response. During the follow-up of 6-71 (median = 30) months, no pulmonary complications greater than an National Cancer Institute-Common Toxicity Criteria of Grade 3 were noted. No other vascular, cardiac, esophageal, or neurologic toxicities were encountered. Forty-four (98%) of 45 tumors were locally controlled during the follow-up period. However, regional recurrences and distant metastases occurred in 3 and 5 of T1 patients and zero and 4 of T2 patients, respectively. For Stage IA lung cancer, the disease-free survival and overall survival rates after 1 and 3 years were 80% and 72%, and 92% and 83%, respectively, whereas for Stage IB lung cancer, the disease-free survival and overall survival rates were 92% and 71%, and 82% and 72%, respectively. CONCLUSION: Forty-eight Gy of 3D stereotactic radiotherapy in 4 fractions using a stereotactic body frame is useful for the treatment of Stage I lung tumors.