Yeast-based evolutionary modeling of androgen receptor mutations and natural selection.

Cancer progression is associated with the evolutionary accumulation of genetic mutations that are biologically significant. Mutations of the androgen receptor (AR) are associated with the development of prostate cancer (PCa) by responding to non-androgenic hormones, and the lack of annotations in their responsiveness to hormone ligands remains a daunting challenge. Here, we have used a yeast reporter system to quickly evaluate the responsiveness of all fifty clinical AR mutations to a variety of steroidal ligands including dihydrotestosterone (DHT), 17ß-estradiol (E2), progesterone (PROG), and cyproterone acetate (CPA). Based on an AR-driven reporter that synthesizes histidine, a basic amino acid required for yeast survival and propagation, the yeast reporter system enabling clonal selection was further empowered by combining with a random DNA mutagenesis library to simulate the natural evolution of AR gene under the selective pressures of steroidal ligands. In a time-frame of 1-2 weeks, 19 AR mutants were identified, in which 11 AR mutants were validated for activation by tested steroidal compounds. The high efficiency of our artificial evolution strategy was further evidenced by a sequential selection that enabled the discovery of multipoint AR mutations and evolution directions under the pressure of steroidal ligands. In summary, our designer yeast is a portable reporter module that can be readily adapted to streamline high-throughput AR-compound screening, used as a PCa clinical reference, and combined with additional bioassay systems to further extend its potential.

A "push-pull-restrain" strategy to improve citronellol production in Saccharomyces cerevisiae.

Microbial production of monoterpenes has attracted increasing attention in recent years. Up to date, there are only few reports on the biosynthesis of the monoterpene alcohol citronellol that is widely used as fragrant and pharmaceutical intermediates. Here, we engineered Saccharomyces cerevisiae by employing a "push-pull-restrain" strategy to improve citronellol production based on the reduction of geraniol. Starting from a engineered geraniol-producing strain, different reductases were investigated and the best performing iridoid synthase from Catharanthus roseus (CrIS) resulted in 285.89 mg/L enantiomerically pure S-citronellol in shake flasks. Geranyl diphosphate (GPP), the most important precursor for monoterpenes, was enhanced by replacing the wild farnesyl diphosphate synthase (Erg20) with the mutant Erg20F96W, increasing the citronellol titer to 406.01 mg/L without negative influence on cell growth. Moreover, we employed synthetic protein scaffolds and protein fusion to colocalize four sequential enzymes to achieve better substrate channeling along with the deletion of an intermediate degradation pathway gene ATF1, which elevated the citronellol titer to 972.02 mg/L with the proportion of 97.8% of total monoterpenes in YPD medium. Finally, the engineered strain with complemented auxotrophic markers produced 8.30 g/L of citronellol by fed-batch fermentation, which was the highest citronellol titer reported to date. The multi-level engineering strategies developed here demonstrate the potential of monoterpenes overproduction in yeast, which can serve as a generally applicable platform for overproduction of other monoterpenes.

Primary and Secondary Metabolic Effects of a Key Gene Deletion (ΔYPL062W) in Metabolically Engineered Terpenoid-Producing Saccharomyces cerevisiae.

Saccharomyces cerevisiae is an established cell factory for production of terpenoid pharmaceuticals and chemicals. Numerous studies have demonstrated that deletion or overexpression of off-pathway genes in yeast can improve terpenoid production. The deletion of YPL062W in S. cerevisiae, in particular, has benefitted carotenoid production by channeling carbon toward carotenoid precursors acetyl coenzyme A (acetyl-CoA) and mevalonate. The genetic function of YPL062W and the molecular mechanisms for these benefits are unknown. In this study, we systematically examined this gene deletion to uncover the gene function and its molecular mechanism. RNA sequencing (RNA-seq) analysis uncovered that YPL062W deletion upregulated the pyruvate dehydrogenase bypass, the mevalonate pathway, heterologous expression of galactose (GAL) promoter-regulated genes, energy metabolism, and membrane composition synthesis. Bioinformatics analysis and serial promoter deletion assay revealed that YPL062W functions as a core promoter for ALD6 and that the expression level of ALD6 is negatively correlated to terpenoid productivity. We demonstrate that ΔYPL062W increases the production of all major terpenoid classes (C10, C15, C20, C30, and C40). Our study not only elucidated the biological function of YPL062W but also provided a detailed methodology for understanding the mechanistic aspects of strain improvement.IMPORTANCE Although computational and reverse metabolic engineering approaches often lead to improved gene deletion mutants for cell factory engineering, the systems level effects of such gene deletions on the production phenotypes have not been extensively studied. Understanding the genetic and molecular function of such gene alterations on production strains will minimize the risk inherent in the development of large-scale fermentation processes, which is a daunting challenge in the field of industrial biotechnology. Therefore, we established a detailed experimental and systems biology approach to uncover the molecular mechanisms of YPL062W deletion in S. cerevisiae, which is shown to improve the production of all terpenoid classes. This study redefines the genetic function of YPL062W, demonstrates a strong correlation between YPL062W and terpenoid production, and provides a useful modification for the creation of terpenoid production platform strains. Further, this study underscores the benefits of detailed and systematic characterization of the metabolic effects of genetic alterations on engineered biosynthetic factories.

Metabolic engineering of Methylobacterium extorquens AM1 for the production of butadiene precursor.

BACKGROUND: Butadiene is a platform chemical used as an industrial feedstock for the manufacture of automobile tires, synthetic resins, latex and engineering plastics. Currently, butadiene is predominantly synthesized as a byproduct of ethylene production from non-renewable petroleum resources. Although the idea of biological synthesis of butadiene from sugars has been discussed in the literature, success for that goal has so far not been reported. As a model system for methanol assimilation, Methylobacterium extorquens AM1 can produce several unique metabolic intermediates for the production of value-added chemicals, including crotonyl-CoA as a potential precursor for butadiene synthesis. RESULTS: In this work, we focused on constructing a metabolic pathway to convert crotonyl-CoA into crotyl diphosphate, a direct precursor of butadiene. The engineered pathway consists of three identified enzymes, a hydroxyethylthiazole kinase (THK) from Escherichia coli, an isopentenyl phosphate kinase (IPK) from Methanothermobacter thermautotrophicus and an aldehyde/alcohol dehydrogenase (ADHE2) from Clostridium acetobutylicum. The Km and kcat of THK, IPK and ADHE2 were determined as 8.35 mM and 1.24 s-1, 1.28 mM and 153.14 s-1, and 2.34 mM and 1.15 s-1 towards crotonol, crotyl monophosphate and crotonyl-CoA, respectively. Then, the activity of one of rate-limiting enzymes, THK, was optimized by random mutagenesis coupled with a developed high-throughput screening colorimetric assay. The resulting variant (THKM82V) isolated from over 3000 colonies showed 8.6-fold higher activity than wild-type, which helped increase the titer of crotyl diphosphate to 0.76 mM, corresponding to a 7.6% conversion from crotonol in the one-pot in vitro reaction. Overexpression of native ADHE2, IPK with THKM82V under a strong promoter mxaF in M. extorquens AM1 did not produce crotyl diphosphate from crotonyl-CoA, but the engineered strain did generate 0.60 µg/mL of intracellular crotyl diphosphate from exogenously supplied crotonol at mid-exponential phase. CONCLUSIONS: These results represent the first step in producing a butadiene precursor in recombinant M. extorquens AM1. It not only demonstrates the feasibility of converting crotonol to key intermediates for butadiene biosynthesis, it also suggests future directions for improving catalytic efficiency of aldehyde/alcohol dehydrogenase to produce butadiene precursor from methanol.

Identification and manipulation of a novel locus to improve cell tolerance to short-chain alcohols in Escherichia coli.

Escherichia coli KO11 is a popular ethanologenic strain, but is more sensitive to ethanol than other producers. Here, an ethanol-tolerant mutant EM was isolated from ultraviolet mutagenesis library of KO11. Comparative genomic analysis added by piecewise knockout strategy and complementation assay revealed EKO11_3023 (espA) within the 36.6-kb deletion from KO11 was the only locus responsible for ethanol sensitivity. Interestingly, when espA was deleted in strain W (the parent strain of KO11), ethanol tolerance was dramatically elevated to the level of espA-free hosts [e.g., MG1655 and BL21(DE3)]. And overexpression of espA in strains MG1655 and BL21(DE3) led to significantly enhanced ethanol sensitivity. In addition to ethanol, deletion of espA also improved cell tolerance to other short-chain (C2-C4) alcohols, including methanol, isopropanol, n-butanol, isobutanol and 2-butanol. Therefore, espA was responsible for short-chain alcohol sensitivity of W-strains compared to other cells, which provides a potential engineering target for alcohols production.

Manipulation of GES and ERG20 for geraniol overproduction in Saccharomyces cerevisiae.

Manipulation of monoterpene synthases to maximize flux towards targeted products from GPP (geranyl diphosphate) is the main challenge for heterologous monoterpene overproduction, in addition to cell toxicity from compounds themselves. In our study, by manipulation of the key enzymes geraniol synthase (GES) and farnesyl diphosphate synthase (Erg20), geraniol (a valuable acyclic monoterpene alcohol) overproduction was achieved in Saccharomyces cerevisiae with truncated 3-hydroxy-3-methylglutaryl-coenzyme reductase (tHMGR) and isopentenyl diphosphate isomerase (IDI1) overexpressed. The expressions of all above engineered genes were under the control of Gal promoter for alleviating product toxicity. Geraniol production varied from trace amount to 43.19mg/L (CrGES, GES from Catharanthus roseus) by screening of nine GESs from diverse species. Further through protein structure analysis and site-directed mutation in CrGES, it was firstly demonstrated that among the high-conserved amino acid residues located in active pocket, Y436 and D501 with strong affinity to diphosphate function group, were critical for the dephosphorylation (the core step for geraniol formation). Moreover, the truncation position of the transit peptide from the N-terminus of CrGES was found to influence protein expression and activity significantly, obtaining a titer of 191.61mg/L geraniol in strain with CrGES truncated at S43 (t3CrGES). Furthermore, directed by surface electrostatics distribution of t3CrGES and Erg20WW (Erg20F96W-N127W), co-expression of the reverse fusion of Erg20ww/t3CrGES and another copy of Erg20WW promoted the geraniol titer to 523.96mg/L at shakes flask level, due to enhancing GPP accessibility led by protein interaction of t3CrGES-Erg20WW and the free Erg20WW. Eventually, a highest reported titer of 1.68g/L geraniol in eukaryote cells was achieved in 2.0L fed-batch fermentation under carbon restriction strategy. Our research opens large opportunities for other microbial production of monoterpenes. It also sets a good reference for desired compounds overproduction in microorganisms in terms of manipulation of key enzymes by protein engineering and metabolic engineering.

Cell foundry with high product specificity and catalytic activity for 21-deoxycortisol biotransformation.

BACKGROUND: 21-deoxycortisol (21-DF) is the key intermediate to manufacture pharmaceutical glucocorticoids. Recently, a Japan patent has realized 21-DF production via biotransformation of 17-hydroxyprogesterone (17-OHP) by purified steroid 11ß-hydroxylase CYP11B1. Due to the less costs on enzyme isolation, purification and stabilization as well as cofactors supply, whole-cell should be preferentially employed as the biocatalyst over purified enzymes. No reports as so far have demonstrated a whole-cell system to produce 21-DF. Therefore, this study aimed to establish a whole-cell biocatalyst to achieve 21-DF transformation with high catalytic activity and product specificity. RESULTS: In this study, Escherichia coli MG1655(DE3), which exhibited the highest substrate transportation rate among other tested chassises, was employed as the host cell to construct our biocatalyst by co-expressing heterologous CYP11B1 together with bovine adrenodoxin and adrenodoxin reductase. Through screening CYP11B1s (with mutagenesis at N-terminus) from nine sources, Homo sapiens CYP11B1 mutant (G25R/G46R/L52 M) achieved the highest 21-DF transformation rate at 10.6 mg/L/h. Furthermore, an optimal substrate concentration of 2.4 g/L and a corresponding transformation rate of 16.2 mg/L/h were obtained by screening substrate concentrations. To be noted, based on structural analysis of the enzyme-substrate complex, two types of site-directed mutations were designed to adjust the relative position between the catalytic active site heme and the substrate. Accordingly, 1.96-fold enhancement on 21-DF transformation rate (to 47.9 mg/L/h) and 2.78-fold improvement on product/by-product ratio (from 0.36 to 1.36) were achieved by the combined mutagenesis of F381A/L382S/I488L. Eventually, after 38-h biotransformation in shake-flask, the production of 21-DF reached to 1.42 g/L with a yield of 52.7%, which is the highest 21-DF production as known. CONCLUSIONS: Heterologous CYP11B1 was manipulated to construct E. coli biocatalyst converting 17-OHP to 21-DF. Through the strategies in terms of (1) screening enzymes (with N-terminal mutagenesis) sources, (2) optimizing substrate concentration, and most importantly (3) rational design novel mutants aided by structural analysis, the 21-DF transformation rate was stepwise improved by 19.5-fold along with 4.67-fold increase on the product/byproduct ratio. Eventually, the highest 21-DF reported production was achieved in shake-flask after 38-h biotransformation. This study highlighted above described methods to obtain a high efficient and specific biocatalyst for the desired biotransformation.

Heterologous biosynthesis and manipulation of crocetin in Saccharomyces cerevisiae.

BACKGROUND: Due to excellent performance in antitumor, antioxidation, antihypertension, antiatherosclerotic and antidepressant activities, crocetin, naturally exists in Crocus sativus L., has great potential applications in medical and food fields. Microbial production of crocetin has received increasing concern in recent years. However, only a patent from EVOVA Inc. and a report from Lou et al. have illustrated the feasibility of microbial biosynthesis of crocetin, but there was no specific titer data reported so far. Saccharomyces cerevisiae is generally regarded as food safety and productive host, and manipulation of key enzymes is critical to balance metabolic flux, consequently improve output. Therefore, to promote crocetin production in S. cerevisiae, all the key enzymes, such as CrtZ, CCD and ALD should be engineered combinatorially. RESULTS: By introduction of heterologous CrtZ and CCD in existing ß-carotene producing strain, crocetin biosynthesis was achieved successfully in S. cerevisiae. Compared to culturing at 30 °C, the crocetin production was improved to 223 µg/L at 20 °C. Moreover, an optimal CrtZ/CCD combination and a titer of 351 µg/L crocetin were obtained by combinatorial screening of CrtZs from nine species and four CCDs from Crocus. Then through screening of heterologous ALDs from Bixa orellana (Bix_ALD) and Synechocystis sp. PCC6803 (Syn_ALD) as well as endogenous ALD6, the crocetin titer was further enhanced by 1.8-folds after incorporating Syn_ALD. Finally a highest reported titer of 1219 µg/L at shake flask level was achieved by overexpression of CCD2 and Syn_ALD. Eventually, through fed-batch fermentation, the production of crocetin in 5-L bioreactor reached to 6278 µg/L, which is the highest crocetin titer reported in eukaryotic cell. CONCLUSIONS: Saccharomyces cerevisiae was engineered to achieve crocetin production in this study. Through combinatorial manipulation of three key enzymes CrtZ, CCD and ALD in terms of screening enzymes sources and regulating protein expression level (reaction temperature and copy number), crocetin titer was stepwise improved by 129.4-fold (from 9.42 to 1219 µg/L) as compared to the starting strain. The highest crocetin titer (6278 µg/L) reported in microbes was achieved in 5-L bioreactors. This study provides a good insight into key enzyme manipulation involved in serial reactions for microbial overproduction of desired compounds with complex structure.

Improved campesterol production in engineered Yarrowia lipolytica strains.

OBJECTIVES: To engineer Yarrowia lipolytica for improving the heterologous production of campesterol (a key precursor to manufacture pharmaceutical steroids). RESULTS: By screening 7-dehydrocholesterol reductase (DHCR7) from diverse species, DHCR7 from Danio rerio was the best candidate for campesterol synthesis. Overexpression of ACL (ATP: citrate lyase) or POX2 (peroxisome acyl-CoA oxidase 2) were key to improving campesterol production. The highest yield of campesterol was 942 mg/l was with the strain overexpressing POX2 in a 5 l bioreactor via high cell density fermentation process with a restricted supply of carbon sourc, sunflower seed oil. CONCLUSIONS: A promising platform to synthesize downstream steroid drugs was established. Efficient approaches were provided to improve the production of desired molecules in Y. lipolytica with high oil utilization efficiency.

An irradiation density dependent energy relaxation in plant photosystem II antenna assembly.

Plant photosystem II (PSII) is a multicomponent pigment-protein complex that harvests sunlight via pigments photoexcitation, and converts light energy into chemical energy. Against high light induced photodamage, excess light absorption of antenna pigments triggers the operation of photoprotection mechanism in plant PSII. Non-photochemical energy relaxation as a major photoprotection way is essentially correlated to the excess light absorption. Here we investigate the energy relaxation of plant PSII complexes with varying incident light density, by performing steady-state and transient chlorophyll fluorescence measurements of the grana membranes (called as BBY), functional moiety PSII reaction center and isolated light-harvesting complex LHCII under excess light irradiation. Based on the chlorophyll fluorescence decays of these samples, it is found that an irradiation density dependent energy relaxation occurs in the LHCII assemblies, especially in the antenna assembly of PSII supercomplexes in grana membrane, when irradiation increases to somewhat higher density levels. Correspondingly, the average chlorophyll fluorescence lifetime of the highly isolated BBY fragments gradually decreases from ~1680 to ~1360 ps with increasing the irradiation density from 6.1×10(9) to 5.5×10(10) photon cm(-2) pulse(-1). Analysis of the relation of fluorescence decay change to the aggregation extent of LHCIIs suggests that a dense arrangement of trimeric LHCIIs is likely the structural base for the occurrence of this irradiation density dependent energy relaxation. Once altering the irradiation density, this energy relaxation is quickly reversible, implying that it may play an important role in photoprotection of plant PSII.

Directly probing redox-linked quinones in photosystem II membrane fragments via UV resonance Raman scattering.

In photosynthesis, photosystem II (PSII) harvests sunlight with bound pigments to oxidize water and reduce quinone to quinol, which serves as electron and proton mediators for solar-to-chemical energy conversion. At least two types of quinone cofactors in PSII are redox-linked: QA, and QB. Here, we for the first time apply 257-nm ultraviolet resonance Raman (UVRR) spectroscopy to acquire the molecular vibrations of plastoquinone (PQ) in PSII membranes. Owing to the resonance enhancement effect, the vibrational signal of PQ in PSII membranes is prominent. A strong band at 1661 cm(-1) is assigned to ring CC/CO symmetric stretch mode (ν8a mode) of PQ, and a weak band at 469 cm(-1) to ring stretch mode. By using a pump-probe difference UVRR method and a sample jet technique, the signals of QA and QB can be distinguished. A frequency difference of 1.4 cm(-1) in ν8a vibrational mode between QA and QB is observed, corresponding to ~86 mV redox potential difference imposed by their protein environment. In addition, there are other PQs in the PSII membranes. A negligible anharmonicity effect on their combination band at 2130 cm(-1) suggests that the 'other PQs' are situated in a hydrophobic environment. The detection of the 'other PQs' might be consistent with the view that another functional PQ cofactor (not QA or QB) exists in PSII. This UVRR approach will be useful to the study of quinone molecules in photosynthesis or other biological systems.

Probing the Lysine Proximal Microenvironments within Membrane Protein Complexes by Active Dimethyl Labeling and Mass Spectrometry.

Positively charged lysines are crucial to maintaining the native structures of proteins and protein complexes by forming hydrogen bonds and electrostatic interactions with their proximal amino acid residues. However, it is still a challenge to develop an efficient method for probing the active proximal microenvironments of lysines without changing their biochemical/physical properties. Herein, we developed an active covalent labeling strategy combined with mass spectrometry to systematically probe the lysine proximal microenvironments within membrane protein complexes (∼700 kDa) with high throughput. Our labeling strategy has the advantages of high labeling efficiency and stability, preservation of the active charge states, as well as biological activity of the labeled proteins. In total, 121 lysines with different labeling levels were obtained for the photosystem II complexes from cyanobacteria, red algae, and spinach and provided important insights for understanding the conserved and nonconserved local structures of PSII complexes among evolutionarily divergent species that perform photosynthesis.

[Preparation and identification of recombinant sarcosine oxidase].

An important index determination for clinical diagnosis of renal function is to assay the creatinine concentration in serum. In the analytical process applied with coupled-enzyme, the quality control of sarcosine oxidase (SOX) as a key enzyme is the first problem to be solved. In order to establish an efficient and laboratory-scale production of SOX, the recombinant sarcosine oxidase (r-SOX) gene was a high-level expression in E. coli induced with lactose on a large-scale fermentation in 300 L fermenter. The results suggested that the biomass concentration reached OD600 of 22 and the expression of recombinant sarcosine oxidase in E. coli accounted for about 25% of total soluble protein in culture after fermentation. The cell-free extract obtained from high pressure homogenizer was processed by selective thermal denaturation and then purified with Ni-Sepharose FF chromatography. The sarcosine oxidase with 97% purity, 25 U/mg specific activity and 92.4% activity recovery was obtained. The molecular weight with single peptide chain of 53 kD and 55 kD of recombinant sarcosine oxidase was assessed by SDS-PAGE in presence or absence of 2-mercaptoehanol and Sephacryl S-200 chromatography. This sarcosine oxidase was found to be a conjugated protein, yellow enzyme, which combined with FAD as prosthetic group by covalent linkage. The contaminant of catalase was not detected in the sample pool of this enzyme. In addition, a further test to the thermal stability of sarcosine oxidase was done. According to the above results, the development and utilization of this enzyme has been set up on a reliable foundation.

Biotransformation of ethylene glycol by engineered Escherichia coli.

There has been extensive research on the biological recycling of PET waste to address the issue of plastic waste pollution, with ethylene glycol (EG) being one of the main components recovered from this process. Therefore, finding ways to convert PET monomer EG into high-value products is crucial for effective PET waste recycling. In this study, we successfully engineered Escherichia coli to utilize EG and produce glycolic acid (GA), expecting to facilitate the biological recycling of PET waste. The engineered E. coli, able to utilize 10 g/L EG to produce 1.38 g/L GA within 96 h, was initially constructed. Subsequently, strategies based on overexpression of key enzymes and knock-out of the competing pathways are employed to enhance EG utilization along with GA biosynthesis. An engineered E. coli, characterized by the highest GA production titer and substrate conversion rate, was obtained. The GA titer increased to 5.1 g/L with a yield of 0.75 g/g EG, which is the highest level in the shake flake experiments. Transcriptional level analysis and metabolomic analysis were then conducted, revealing that overexpression of key enzymes and knock-out of the competing pathways improved the metabolic flow in the EG utilization. The improved metabolic flow also leads to accelerated synthesis and metabolism of amino acids.

Systematic Engineering to Enhance ß-Myrcene Production in Yeast.

ß-Myrcene is an important monoterpene compound widely used in the fragrance, agricultural, and food industries. The microbial production of ß-myrcene conforms to the trend of green biological manufacturing, which has great potential for development. The poor catalytic activity of ß-myrcene synthase (MS) and the insufficient supply of precursors are considered to be the bottlenecks of ß-myrcene production. Here, source screening, subcellular localization, enzyme fusion, and precursor-enhancing strategies were integrated for ß-myrcene biosynthesis with Saccharomyces cerevisiae. The ß-myrcene titer gradually increased by 218-fold (up to 63.59 mg/L) compared to that of the initial titer of the shake flask. Moreover, the titer reached 66.82 mg/L after the addition of antioxidants (1 mM glutathione, GSH, and 1% butylated hydroxytoluene, BHT). Ultimately, 142.64 mg/L ß-myrcene in S. cerevisiae was achieved in 5.0 L of fed-batch fermentation under a carbon restriction strategy, which was the highest reported titer in yeast thus far. This study not only established a platform for ß-myrcene production but also provided a reference for the efficient biosynthesis of other monoterpene compounds.

Multidimensional combinatorial screening for high-level production of erythritol in Yarrowia lipolytica.

Yarrowia lipolytica was successfully engineered to synthesize erythritol from crude glycerol, a cheap by-product of biodiesel production, but the yield remained low. Here, a biosensor-guided adaptive evolution screening platform was constructed to obtain mutant strains which could efficiently utilize crude glycerol to produce erythritol. Erythrose reductase D46A (M1) was identified as a key mutant through whole-genome sequencing of the strain G12, which exhibited higher catalytic activity (1.6-fold of the wild-type). M1 was further modified to obtain a combinatorial mutant with 4.1-fold enhancement of catalytic activity. Finally, the metabolic network was reconfigured to redirect carbon fluxes toward erythritol synthesis. The erythritol titer of the engineered strain G31 reached 220.5 g/L with a productivity of 1.8 g/L/h in a 5-L bioreactor. The study provides valuable guidance for biosensor-based ultra-high-throughput screening strategies in Y. lipolytica, as well as presenting a new paradigm for the sustainable valorization of crude glycerol.

Systems Metabolic Engineering for Efficient Violaxanthin Production in Yeast.

Violaxanthin is a plant-derived orange xanthophyll with remarkable antioxidant activity that has wide applications in various industries, such as food, agriculture, and cosmetics. In addition, it is the key precursor of important substances such as abscisic acid and fucoxanthin. Saccharomyces cerevisiae, as a GRAS (generally regarded as safe) chassis, provides a good platform for producing violaxanthin production with a yield of 7.3 mg/g DCW, which is far away from commercialization. Herein, an integrated strategy involving zeaxanthin epoxidase (ZEP) source screening, cytosol redox state engineering, and nicotinamide adenine dinucleotide phosphate (NADPH) regeneration was implemented to enhance violaxanthin production in S. cerevisiae. 58aa-truncated ZEP from Vitis vinifera exhibited optimal efficiency in an efficient zeaxanthin-producing strain. The titer of violaxanthin gradually increased by 17.9-fold (up to 119.2 mg/L, 15.19 mg/g DCW) via cytosol redox state engineering and NADPH supplementation. Furthermore, balancing redox homeostasis considerably improved the zeaxanthin concentration by 139.3% (up to 143.9 mg/L, 22.06 mg/g DCW). Thus, the highest reported titers of violaxanthin and zeaxanthin in S. cerevisiae were eventually achieved. This study not only builds an efficient platform for violaxanthin biosynthesis but also serves as a useful reference for the microbial production of xanthophylls.

A customized self-assembled synergistic biocatalyst for plastic depolymerization.

The enzymatic degradation of plastic offers a green, sustainable strategy and scalable circular carbon route for solving polyester waste. Among the earlies discovered plastic-degrading enzymes are PET hydrolase (PETase) and MHET hydrolase (MHETase), which act synergistically. To promote the adsorption of enzymes on PET surfaces, increase their robustness, and enable directly depolymerization, we designed hydrophobin HFBI fused-PETase and MHETase. A customized self-assembled synergistic biocatalyst (MC@CaZn-MOF) was further developed to promote the two-step depolymerization process. The tailored catalysts showed better adhesion to the PET surface and desirable durability, retaining over 70% relative activity after incubation at pH 8.0 and 60 °C for 120 h. Importantly, MC@CaZn-MOF could directly decompose untreated AGf-PET to generate 9.5 mM TPA with weight loss over 90%. The successful implementation of a bifunctional customized catalyst makes the large-scale biocatalytic degradation of PET feasible, contributing to polymer upcycling and environmental sustainability.

Molecular Insights into Converting Hydroxide Adenosyltransferase into Halogenase.

Halogenation plays a unique role in the design of agrochemicals. Enzymatic halogenation reactions have attracted great attention due to their excellent specificity and mild reaction conditions. S-adenosyl-l-methionine (SAM)-dependent halogenases mediate the nucleophilic attack of halide ions (X-) to SAM to produce 5'-XDA. However, only 11 SAM-dependent fluorinases and 3 chlorinases have been reported, highlighting the desire for additional halogenases. SAM-dependent hydroxide adenosyltransferase (HATase) has a similar reaction mechanism as halogenases but uses water as a substrate instead of halide ions. Here, we explored a HATase from the thermophile Thermotoga maritima MSB8 and transformed it into a halogenase. We identified a key dyad W8L/V71T for the halogenation reaction. We also obtained the best performing mutants for each halogenation reaction: M1, M2 and M4 for Cl-, Br- and I-, respectively. The M4 mutant retained the thermostability of HATase in the iodination reaction at 80 °C, which surpasses the natural halogenase SalL. QM/MM revealed that these mutants bind halide ions with more suitable angles for nucleophilic attack of C5' of SAM, thus conferring halogenation capabilities. Our work achieved the halide ion specificity of halogenases and generated thermostable halogenases for the first time, which provides new opportunities to expand the halogenase repertoire from hydroxylase.

Enzyme Engineering Renders Chlorinase the Activity of Fluorinase.

Organofluorine compounds have attracted substantial attention owing to their wide application in agrochemistry. Fluorinase (FlA) is a unique enzyme in nature that can incorporate fluorine into an organic molecule. Chlorinase (SalL) has a similar mechanism as fluorinase and can use chloride but not fluoride as a substrate to generate 5'-chloro-deoxyadenosine (5'-ClDA) from S-adenosyl-l-methionine (SAM). Therefore, identifying the features that lead to this selectivity for halide ions is highly important. Here, we engineered SalL to gain the function of FlA. We found that residue Tyr70 plays a key role in this conversion through alanine scanning. Site-saturation mutagenesis experiments demonstrated that Y70A/C/S/T/G all exhibited obvious fluorinase activity. The G131S mutant of SalL, in which the previously thought crucial residue Ser158 for fluoride binding in FlA was introduced, did not exhibit fluorination activity. Compared with the Y70T single mutant, the double mutant Y70T/W129F increased 5'-fluoro-5-deoxyadenosine (5'-FDA) production by 76%. The quantum mechanics (QM)/molecular mechanics (MM) calculations suggested that the lower energy barriers and shorter nucleophilic distance from F- to SAM in the mutants than in the SalL wild-type may contribute to the activity. Therefore, our study not only renders SalL the activity of FlA but also sheds light on the enzyme selectivity between fluoride versus chloride.