Nitrogen deprivation of microalgae: effect on cell size, cell wall thickness, cell strength, and resistance to mechanical disruption.

Nitrogen deprivation (N-deprivation) is a proven strategy for inducing triacylglyceride accumulation in microalgae. However, its effect on the physical properties of cells and subsequently on product recovery processes is relatively unknown. In this study, the effect of N-deprivation on the cell size, cell wall thickness, and mechanical strength of three microalgae was investigated. As determined by analysis of micrographs from transmission electron microscopy, the average cell size and cell wall thickness for N-deprived Nannochloropsis sp. and Chlorococcum sp. were ca. 25% greater than the N-replete cells, and 20 and 70% greater, respectively, for N-deprived Chlorella sp. The average Young's modulus of N-deprived Chlorococcum sp. cells was estimated using atomic force microscopy to be 775 kPa; 30% greater than the N-replete population. Although statistically significant, these microstructural changes did not appear to affect the overall susceptibility of cells to mechanical rupture by high pressure homogenisation. This is important as it suggests that subjecting these microalgae to nitrogen starvation to accumulate lipids does not adversely affect the recovery of intracellular lipids.

Energy evaluation of algal cell disruption by high pressure homogenisation.

The energy consumption of high pressure homogenisation (HPH) was analysed to determine the feasibility of rupturing algal cells for biodiesel production. Experimentally, the processing capacity (i.e. flow rate), power draw and cell disruption efficiency of HPH were independent of feed concentration (for Nannochloropsis sp. up to 25%w/w solids). Depending on the homogenisation pressure (60-150 MPa), the solids concentration (0.25-25%w/w), and triacylglyceride (TAG) content of the harvested algal biomass (10-30%), the energy consumed by HPH represented between 6% and 110-times the energy density of the resulting biodiesel. Provided the right species (weak cell wall and high TAG content) is selected and the biomass is processed at a sufficiently high solids concentration, HPH can consume a small fraction of the energy content of the biodiesel produced. This study demonstrates the feasibility of process-scale algal cell disruption by HPH based on its energy requirement.

Quantitative evaluation of the ease of rupture of industrially promising microalgae by high pressure homogenization.

The susceptibility to rupture of the microalgae Nannochloropsis sp., Chlorella sp. and Tetraselmis suecica by high pressure homogenization was compared quantitatively to the yeast Saccharomyces cerevisiae. Methods for quantifying cell rupture were investigated including cell counting, turbidity, metabolite release and particle sizing. Cell counting was the only reliable method for quantitative comparisons of all microalgae, with turbidity complicated by agglomeration of cell debris for T. suecica, and measurement of metabolite release affected by degradation occurring for all microalgae after significant rupture. The rupture of all microalgae followed exponential decay as a function of number of passes. The pressure required to achieve rupture of 50% of the cells per pass was determined to be 170, 1070, 1380, and ca. 2000 bar for Tetraselmis sp., Chlorella sp., S. cerevisiae, and Nannochloropsis sp., respectively. These results extend the criteria for selecting microalgae for industrial applications beyond consideration of growth and compositional attributes.