Prevertebral soft tissue swelling after anterior cervical internal fixation at different segments: a retrospective study.

Atlantoaxial segments have not been discussed in existing studies on prevertebral soft tissue (PVST) swelling after cervical operations. This study aimed to investigate the characteristics of PVST swelling after anterior cervical internal fixation at different segments. This retrospective study included patients who underwent transoral atlantoaxial reduction plate (TARP) internal fixation (Group I, n=73), C3/C4 anterior decompression and vertebral fixation (Group II, n=77), or C5/C6 anterior decompression and vertebral fixation (Group III, n=75) at our Hospital. The PVST thickness at C2, C3, and C4 segments was measured before and 3 days after the operation. Time of extubation, number of patients with postoperative re-intubation and dysphagia were collected. Results show that all patients had significant postoperative PVST thickening (all P<0.01). PVST thickening at C2, C3, and C4 was significantly greater in Group I than in Groups II and III (all P<0.01). PVST thickening at C2, C3, and C4 in Group I was 1.87 (14.12mm/7.54mm), 1.82 (12.90mm/7.07mm) and 1.71 (12.09mm/7.07mm) times of that in Group II, respectively. PVST thickening at C2, C3, and C4 in Group I was 2.66 (14.12mm/5.31mm), 1.50 (12.90mm/8.62mm) and 1.32 (12.09mm/9.18mm) times of that in Group III, respectively. The patients in Group I had significantly later postoperative extubation (Both P<0.01) than the patients in Groups II and III. None of the patients had postoperative re-intubation or dysphagia. We conclude that PVST swelling was greater in patients who underwent TARP internal fixation than in patients who underwent anterior C3/C4 or C5/C6 internal fixation. Hence, after TARP internal fixation, patients should be given proper respiratory tract management and monitoring.

Cuff-leak test combined with interventional bronchoscopy benefits early extubation for patients who received tarp surgery.

PURPOSE: This study explored the performance characteristics of a cuff-leak test (CLT) combined with interventional fiberoptic bronchoscopy (FBS) for evaluating whether early nasoendotracheal extubation was possible for patients who had received transoral atlantoaxial reduction plate (TARP) internal fixation surgery. METHODS: 318 patients who underwent surgery were retrospectively analyzed (between January 2006 and December 2012). Extubation was performed by conventional approach (CA group, until December 2008) and improved approach (IA group, from January 2009) including CLT and an interventional FBS procedure. The extubation success within 1-3 days after surgery, incidence of postextubation stridor and tracheal reintubation were examined. RESULTS: More IA-treated patients experienced extubation during the first 2 days than those CA-treated, median extubation time was 3 (2, 3) days in the CA group and 2 (1, 2) days in the IA group (all P < 0.01). The incidence of stridor and reintubation was 5.69 and 0.57 % in IA and 11.98 and 4.93 % in CA, respectively (both P < 0.05). For the CLT-positive patients in the IA group that remained intubated until day 3-4, interventional FBS was applied for safe extubation and achieved 100 % success. CONCLUSION: Early extubation through IA is safe and interventional FBS assists successful extubation for CLT-positive patients who underwent TARP surgery.

Treatment of irreducible atlantoaxial dislocation using the transoral atlantoaxial pedicle screw technique. A report of 10 cases.

OBJECTIVE: The purpose of this work is to evaluate the outcome of the transoral atlantoaxial pedicle screw technique for the treatment of irreducible atlantoaxial dislocation (IAAD). PATIENTS AND METHODS: A total of 10 patients with IAAD were treated using the transoral atlantoaxial pedicle screw technique. We compared preoperative and postoperative JOA (Japanese Orthopedic Association) scores and observed bone graft fusion rate of the atlantoaxial joint, and examined whether our technique was suitable for the treatment of IAAD. RESULTS: The mean preoperative and postoperative JOA scores (9.2 ± 0.63 and 12.9 ± 0.73, respectively) were significantly different (P < 0.05). The atlantoaxial rigid bony fusion rate was 100 % in 10 cases. All cases were followed up for an average of 5.1 years (range 3.5-6 years). CONCLUSION: The transoral atlantoaxial screw reconstruction plate technique is a novel surgical technique for the treatment of IAAD in upper cervical diseases.

Effects of Different Lengths of Ti Nanorods Topography on Mesenchymal Stem Cell Growth and Proliferation.

Total hip and knee arthroplasty have being successfully performed in world-wide in recent years. However, poor osseointegration between implant (polish surface) and host bone tissue is one of the main causes for aseptic loosening in Ti-based materials and result in failure. Fabricating nanotopography is a promising method to improve cell behaviors and promote osseointegration. Ti nanorods array of vary lengths have been produced via selective corrosion of Ti substrate using electrochemical anodization technique on titanium surface. In this study, we investigated the murine bone mesenchymal stem cell (MSC) behaviors in response to these different lengths of nanorods. The result showed that the nanorod of 100 nm length increased MSCs adhesion and proliferation. Increased elongation of cytoskeleton actin was also observed on 100 nm height, which resulted in substantially up-regulation of alkaline phosphatase (ALP) activity, suggesting greater bone-forming ability than control Ti. The Ti nanorods of 100 nm length may be a promising implant surface to improve the osseointegration.

Human breast adipose-derived stem cells transfected with the stromal cell-derived factor-1 receptor CXCR4 exhibit enhanced viability in human autologous free fat grafts.

BACKGROUND: The main complication of autologous free fat tissue transplantation is fat resorption and calcification due to the ischemic necrosis of fat. The promotion of transplant neovascularization soon after autologous free fat grafts may reduce these outcomes. In adulthood, stromal cell-derived factor-1 (SDF-1) and its membrane receptor C-X-C chemokine receptor type 4 (CXCR4) are involved in the homing and migration of multiple stem cell types, neovascularization, and cell proliferation. We hypothesized that CXCR4 may improve the long-term survival of free fat tissue transplants by recruiting endothelial progenitor cells (EPCs) and may therefore improve graft revascularization. In this study, we aimed to determine the effect of human breast adipose-derived stem cells (HBASCs) transfected with the CXCR4 gene on the survival rate of human autologous free fat transplants in nude mice. METHODS: Human breast adipose-derived stem cells (HBASCs) were expanded ex vivo for 3 passages, labeled with green fluorescent protein (GFP) and transfected with CXCR4 or left untransfected. Autologous fat tissues were mixed with the GFP-labeled, CXCR4-transfected HBASCs (group A), GFP-labeled HBASCs (group B), the known vascularization-promoting agent VEGF (group C), or medium (group D) and then injected subcutaneously into 32 nude mice at 4 spots in a random fashion. Six months later, the transplanted tissue volume and histology were evaluated, and neo-vascularization was quantified by counting the capillaries. CXCR4 and SDF-1α mRNA expression in the transplants was determined using real-time quantitative PCR analysis (qPCR). RESULTS: The data revealed that the control (group D) transplant volume survival was 28.3 ± 4.5%. Mixing CXCR4-transfected (group A) and untransfected (group B) HBASCs significantly increased transplant volume survival (79.5 ± 8.3% and 67.2 ± 5.9%, respectively), whereas VEGF-transfected HBASCs (group C) were less effective (41.2 ± 5.1%). Histological analysis revealed that both types of HBASCs-treated transplants consisted predominantly of adipose tissue, unlike the control transplants, and also presented significantly less fat necrosis and fibrosis. The CXCR4-transfected HBASCs-treated transplants had a significantly higher capillary density than did the other transplants and showed GFP and CD31 double-positive cells (i.e., ASCs-derived endothelial cells). The mRNA expression of CXCR4 and SDF-1α was much higher in the CXCR4-transfected HBASCs transplants than in the other three transplants. CONCLUSIONS: Our data demonstrated that HBASCs can enhance the survival and quality of transplanted free fat tissues. Moreover, CXCR4 transfection of these HBASCs could augment this effect. Stimulation of angiogenesis and decreased fat cell apoptosis due to the recruitment of endothelial progenitor cells (EPCs) and an increase in graft revascularization are potential mechanisms underlying the improved long-term survival of free fat transplants following CXCR4-transfected HBASCs treatment.

Effect of ginsenoside Rg1 on proliferation and neural phenotype differentiation of human adipose-derived stem cells in vitro.

AIMS: To investigate whether ginsenoside Rg1 can promote neural phenotype differentiation of human adipose-derived stem cells (hASCs) in vitro. METHODS: hASCs were isolated from lipo-aspirates, and characterized by specific cell markers and multilineage differentiation capacity after culturing to the 3rd passage. Cultured hASCs were treated with neural inductive media alone (group A, control) or inductive media plus 10, 50, or 100 µg/mL ginsenoside Rg1 (groups B, C, and D, respectively). Cell proliferation was assessed by CCK-8 assay. Neuron specific enolase (NSE) and microtubule-associated protein-2 (MAP-2) levels were measured by Western blot. mRNA levels of growth associated protein-43 (GAP-43), neural cell adhesion molecule (NCAM), and synapsin-1 (SYN-1) were determined by real-time PCR. RESULTS: Ginsenoside Rg1 promoted the proliferation of hASCs (groups B, C, and D) and resulted in higher expression of NSE and MAP-2 compared with the control group. Gene expression levels of GAP-43, NCAM, and SYN-1 in the test groups were higher than that in thw control. The results displayed a dose-dependent effect of ginsenoside Rg1 on cell proliferation and neural phenotype differentiation. CONCLUSION: This study indicated that ginsenoside Rg1 promotes cell proliferation and neural phenotype differentiation of hASCs in vitro, suggesting a potential use for hASCs in neural regeneration medicine.

Anterior pedicle screw fixation of C2: an anatomic analysis of axis morphology and simulated surgical fixation.

STUDY DESIGN: Human cadaveric study measuring the morphology of C2 vertebra, description of anterior placement of pedicle screw with post-fixation computed tomography (CT) analysis. OBJECTIVE: To assess the potential feasibility and safety anterior placement of C2 pedicle screws. SUMMARY OF BACKGROUND DATA: Posterior pedicle screw fixation has become an established technique for upper cervical reconstruction. To our knowledge few reports in the previous literature have described the placement of or anatomy related to anteriorly approach C2 pedicle screws. METHODS: The morphology of 60 human C2 vertebrae was measured directly to assess the size, position, and relative approach angle of the pedicles from an anterior perspective. In an additional 20 cadaveric cervical spines, bilateral 3.5 mm titanium C2 pedicle screws were placed and analyzed for pedicle morphology and placement accuracy with thin cut, 1 mm axial CT. RESULTS: The mean C2 pedicle width measured directly and by CT scan was 7.8 and 6.6 mm, and the average length of the right and left pedicle was 26.4 and 25 mm, respectively. The mean transverse angle (α) was 17.6° and 21.4°, whereas declination angle (ß) anterior to posterior was 13.8° and 10.6°, respectively. CONCLUSIONS: Quantitative data regarding C2 pedicle shape and location with respect to the anterior placement of pedicle screws have not been previously reported. This study indicates that anterior placement of 3.5 mm C2 pedicle screws through a transoral approach may be both feasible and safe and also provides an important anatomic analysis that may guide clinical application.

Osteogenic activity of silver-loaded coral hydroxyapatite and its investigation in vivo.

In this study, the scaffolds based on mineralized silver-loaded coral hydroxyapatites (SLCHAs) were developed for bone regeneration in the radius of rabbit with a 15-mm infective segmental defect model for the first time. The SLCHAs were achieved by surface adsorption and ion-exchange reaction between Ca(2+) of coral hydroxyapatite (CHA) and Ag(+) of silver nitrate with different concentration at room temperature. Release experiment in vitro, X-ray diffraction and scanning electron microscopy equipped with energy-dispersive X-ray spectrometer were applied to exhibit that the scaffold showed some features of natural bone both in main component and hierarchical microstructure. The three-dimensional porous scaffold materials imitate the microstructure of cancellous bone. Mouse embryonic pre-osteoblast cells (MC3T3-E1) were used to investigate the cytocompatibility of SLCHAs, CHA and pure coral. Cell activity were studied with alkaline phosphataseenzyme assay after 2, 4, 6 days of incubation. It was no statistically significant differences in cell activity on the scaffolds of Ag(+)(13.6 µg/mL)/CHA, Ag(+)(1.7 µg/mL)/CHA, CHA and pure coral. The results indicated that the lower silver concentration has little effect on cell activity. In the implantation test, the infective segmental defect repaired with SLCHAs was healed up after 10 weeks after surgery, and the implanted composites were almost substituted by new bone tissue, which were very comparable with the scaffold based on mineralized CHA. It could be concluded that the SLCHAs contained with appropriate silver ionic content could act as biocidal agents and maintain the advantages of mineralized CHA or coral, while avoiding potential bacteria-dangers and toxical heavy-metal reaction. All the above results showed that the SLCHAs with anti-infective would be as a promising scaffold material, which whould be widely applied into the clinical for bone regeneration.

Clinical application of computer-aided design-rapid prototyping in C1-C2 operation techniques for complex atlantoaxial instability.

STUDY DESIGN: This is a retrospective clinical study. OBJECTIVE: To evaluate the clinical efficacy of computer-aided design-rapid prototyping (CAD-RP) techniques in surgical treatments for atlantoaxial instability (AAI). SUMMARY OF BACKGROUND DATA: The complexity of the upper cervical anatomic structures makes the procedures for the treatment of AAI particularly challenging for surgeons. The present study represents a series of C1-C2 surgery for AAI aided by CAD-RP. METHODS: A total of 49 patients (21 men and 28 women) with AAI were treated in our department. According to the use of the CAD-RP technique, the patients were divided into RP group and No RP group. Preoperative CT scans of the upper cervical spine were performed for each patient. For the RP group, physical RP models of the upper cervical spine were manufactured from the 3-dimensional CT data and were used for intraoperative guidance. Personalized surgeries were performed for each case of the 2 groups. The screw malposition rate, frequency of using intraoperative fluoroscopy, operation time, blood loss, and improvement of neurological function were compared between the 2 groups. The mean follow-up duration was 32 months (range, 24-50 mo). RESULTS: The operations were successfully performed in 48 cases expect for 1 case in the No RP group. A total of 204 screws were placed. The intraoperative fluoroscopy frequency and operation time were significantly lower in the RP group than that in the No RP group in both posterior and anterior approaches, whereas the screw malposition rate showed no difference between the 2 groups for both approaches. After the operation, 48 cases achieved satisfactory decompression of the cervical cord and repositioning of the atlantoaxial spine. During follow-up, 47 cases presented improvements in the spinal nerve function within 2 years. CONCLUSIONS: CAD-RP techniques have significant benefits for surgeons providing personalized treatments for AAI, especially cases with complicated deformities.

Unilateral versus bilateral fixation for lumbar spinal fusion: a systemic review and meta-analysis.

PURPOSE: The objective of this study was to systematically compare the efficacy and safety of unilateral fixation to bilateral fixation for the lumbar degenerative disease. STUDY DESIGN: Systematic review and meta-analysis. METHODS: We searched databases including PubMed Central, MEDLINE (from 1966), EMBASE (from 1980), and Cochrane Central Register of Controlled Trials databases for randomized controlled trials or non-randomized controlled trials that compare unilateral fixation with bilateral fixation for the treatment for lumbar disease. Exclusion criteria were non-controlled studies, follow-up <6 months, combined anterior and posterior surgery, lumbar tumors, and non-English writing paper. Methodologic quality was assessed, relevant data were retrieved, and the appropriate meta-analysis was performed. Two review authors independently selected studies, extracted data, and assessed the risk of bias. The main end points included the rate of fusion, visual analogue scale (VAS), Oswestry disability index (ODI), intra-operative blood loss, operating time, and the rate of complications. RESULTS: A total of seven studies were included in the meta-analysis. Four relevant randomized controlled trials, one prospective study, and two retrospective studies involving 499 patients were identified. Patients in unilateral pedicle fixation group compared with bilateral pedicle screw fixation group on the fusion rate, VAS, ODI scores, and complication rate demonstrated no significant differences (P > 0.05, respectively). However, intra-operative blood loss and operating time in unilateral fixation group were significantly less than bilateral fixation group (P < 0.0001, respectively). CONCLUSIONS: Unilateral fixation seems to be an effective, feasible, and safe procedure in one or two segmental disease when compare with bilateral instrumentation.

Personalised modified osteotomy using computer-aided design-rapid prototyping to correct thoracic deformities.

The correction of severe thoracic deformities is challenging. However, the usual imaging modalities are not sufficient for performing the surgery. Our objective was to describe the procedure and results of posterior modified wedge osteotomy aided by the techniques of computer-aided design-rapid prototyping (CAD-RP) to correct thoracic deformities. Twenty-one patients with thoracic deformities (eight males; 13 females) formed the study group. All patients underwent computed tomography (CT) scanning and CAD-RP, and a model of thoracic deformities and navigation templates of pedicles were created for each patient and used to analyse the spinal deformities and serve as anatomical reference. Aided by these models, personalised modified wedge osteotomy combining the eggshell technique and posterior vertebral column resection was performed. Using CAD-RP improved the safety and accuracy of surgery and screw placement in the 21 patients in whom 41 vertebrae were removed and 216 pedicle screws were placed. The average operation time was 260 (200-420) min, with an average blood loss of 1,900 ml (range 800-3560 ml). The percentage of deformity correction was 56.3% (from 72.1° to 31.5°) in the coronal plane and 60.4% (from 81.6° to 32.3°) in the sagittal plane. No patient had serious complications or implant failure. Personalised single-stage posterior modified wedge osteotomy is an effective procedure for treating thoracic deformities. Using CAD-RP and the RP models have significant benefits for personalised surgical treatment of complex thoracic deformities.

Determination of antibacterial properties and cytocompatibility of silver-loaded coral hydroxyapatite.

In this study, silver-loaded coral hydroxyapatites (SLCHAs) were used as scaffolds for bone tissue engineering. The SLCHAs were prepared by surface adsorption process and ion-exchange reaction between Ca(2+) of coral hydroxyapatite (CHA) and Ag(+) of silver nitrate with different concentrations at room temperature. The properties of the composite SLCHAs were investigated by inductively coupled plasma-atomic emission spectrometry (ICP-AES), scanning electron microscropy (SEM) equipped with backscattered electron detector (BSE), and energy-dispersive X-ray spectrometer (EDS). The SEM images showed that the morphology of the SLCHAs depended on the content of Ag(+), and the silver ions were uniformly distributed on the surface of SLCHAs. The ICP-AES results demonstrated that the silver content of the SLCHAs decreased along with the decrease of the concentration of silver nitrate. The SLCHAs were found effective against Escherichia coli and Staphylococcus aureus by antibacterial test. Mouse embryonic pre-osteoblast cells (MC3T3-E1) were used to test the cytocompatibility of SLCHAs, CHA, and pure coral. Cell morphology and cell proliferation were studied with SEM, laser scanning confocal microscope (LSCM), and MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide) assay after 1, 3, and 5 days of culture. The results indicated the cell morphology and proliferation on the scaffolds of Ag(+) (13.6 microg/ml)/CHA and Ag(+) (1.7 microg/ml)/CHA were better than that on Ag(+) (170 microg/ml)/CHA. In addition, adhesion of MC3T3-E1 on the scaffolds showed that the confluent cells showed fusiform shape and arranged tightly on the scaffolds. All the results showed that the antibacterial SLCHAs would have potential clinical application as the scaffolds for bone tissue engineering.

[Risk factors for postoperative pulmonary complications following transoral operation for the atlanta-axis disorders].

OBJECTIVE: to evaluate the risk factors for postoperative pulmonary complications following transoral operation for the atlanta-axis disorders. METHODS: total 104 cases were collected from January 2005 to June 2009. Twelve variables among patients with PPCs and without PPCs were analyzed by logistic regression analysis. RESULTS: the incidence of postoperative pulmonary complications following transoral operation for the atlanta-axis disorders was 22.1% (23/104). There was significantly difference in 9 variables between patients with PPCs and without PPCs, and 5 variables as serum albumin < 35 g/L (OR = 15.185, P = 0.003), tracheotomy (OR = 32.254, P = 0.015), Frankle grade (OR = 8.866, P = 0.001), the duration of intubation > 4 d (OR = 7.934, P = 0.002), the duration of surgery > 6 h (OR = 16.889, P = 0.006) were found to be significantly related to the development to postoperative pulmonary complications by multivariate analysis. CONCLUSION: serum albumin < 35 g/L, tracheotomy, Frankle grade, the duration of intubation > 4 d, the duration of surgery > 6 h are the risk factors for postoperative pulmonary complications following transoral operation for the atlanta-axis disorders.

[Diagnosis and treatment for complicated atlantoaxial dislocation].

OBJECTIVE: To explore the clinical characteristics and treatment methods for complicated atlantoaxial dislocation. METHODS: A retrospective evaluation was done to summarize and analyze the clinical characteristics and complicated factors of 54 patients with complicated atlantoaxial dislocation who could not to be treated effectively by using conventional therapy in our hospital from February 2005 to October 2008. According to different complicated factors, different treatment methods mainly including transoral atlantoaxial reduction plate-III (TARP-III) operation, decompression procedure with deep grinding guided by computer aided design-rapid prototyping (CAD-RP), screw placement technique with CAD-RP guide plate and extensile approach surgery were performed. RESULTS: The average follow-up period was 24 months. Among 54 cases, 48 cases achieved immediate anatomic reduction completely and 6 cases almost achieved anatomical reduction. All the compressed spinal cords were decompressed sufficiently. The decompression rate was 86.0% and the improvement rate of nerve function was 77.8%. Two cases suffered postoperative intracranial infection. CONCLUSION: Some cases of complicated atlantoaxial dislocation can be effectively treated by using TARP-III operation, decompression procedure with deep grinding guided by CAD-RP, individualized screw placement technique with CAD-RP guide plate and extensile approach surgery.

[The synthetic typing and its clinical application in atlantoaxial dislocation].

OBJECTIVE: To evaluate the synthetic typing and the treatment strategy for atlantoaxial dislocation. METHODS: The synthetic typing of atlantoaxial dislocation was worked out on the base of pathogenesis typing, Fielding imaging typing, and clinical typing, named PIR typing system (Pathogenesis, Imaging, and Reduction). Ninety-three patients with atlantoaxial dislocation were treated according to this typing system. RESULTS: Nine cases of type-II dens fracture were treated with hollow screw fixation. Bone union was accomplished at the follow-up of three months in all the patients, only with slight limitation of cervical motion. Un-retrieved Fielding I -degree dislocation was found in one case. Among the thirty-four patients treated with trans-oropharyngeal atlantoaxial reduction plate system (TARP), 32 obtained complete atlantoaxial reduction and fusion three months after operation. Atlantoaxial dislocation recurred in the other two cases because of screw loosening and the problem was solved through revision operations. Four patients in non-reducible type underwent anterior and/or posterior decompression. T heir neurological improved after operation but their atlantoaxial joints remained dislocated, and one case complicated with intracranial infection. CONCLUSIONS: Via the synthetic PIR typing system, atlantoaxial dislocation can be better classified according to its pathogenesis, imaging manifestation and mechanic stability. This system can also be served as a guide for clinical treatment. Anterior TARP operation and posterior atlantoaxial trans-pedicle screw-rod fixation are the main methods for the treatment of atlantoaxial dislocation.

The anatomical study of transoral atlantoaxial reduction plate internal fixation.

OBJECTIVE: To study relevant anatomical features of the structures involved in transoral atlanto-axial reduction plate (TARP) internal fixation through transoral approach for treating irreducible atlanto-axial dislocation and providing anatomical basis for the clinical application of TARP. METHODS: Ten fresh craniocervical specimens were microsurgically dissected layer by layer through transoral approach. The stratification of the posterior pharyngeal wall, the course of the vertebral artery, anatomical relationships of the adjacent structures of the atlas and axis, and the closely relevant anatomical parameters for TARP internal fixation were measured. RESULTS: The posterior pharyngeal wall consisted of two layers and two interspaces: the mucosa, prevertebral fascia, retropharyngeal space, and prevertebral space. The range from the anterior edge of the foramen magnum to C(3) could be exposed by this approach. The thickness of the posterior pharyngeal wall was (3.6+/-0.3) mm (ranging 2.9-4.3 mm) at the anterior tubercle of C1, (6.1+/-0.4) mm (ranging 5.2-7.1 mm) at the lateral mass of C(1) and (5.5+/-0.4) mm (ranging 4.3-6.5 mm) at the central part of C(2), respectively. The distance from the incisor tooth to the anterior tubercle of C(1), C(1) screw entry point, and C(2)screw entry point was (82.5+/-7.8) mm (ranging 71.4-96.2 mm), (90.1+/-3.8) mm (ranging 82.2-96.3 mm), and (89.0+/-4.1) mm (ranging 81.3-95.3 mm), respectively. The distance between the vertebral artery at the atlas and the midline was (25.2+/- 2.3) mm (ranging 20.4-29.7 mm) and that between the vertebral artery at the axis and the midline was (18.4+/- 2.6) mm (ranging 13.1-23.0 mm). The allowed width of the atlas and axis for exposure was (39.4+/-2.2) mm (ranging 36.2-42.7 mm) and (39.0+/-2.1) mm (ranging 35.8-42.3 mm), respectively. The distance (a) between the two atlas screw insertion points (center of anterior aspect of C(1) lateral mass) was (31.4+/-3.3) mm (ranging 25.4-36.6 mm). The vertical distance (b) between the line connecting the two C(1) screw entry points and that connecting the two C(2) screw entry points (at the central part of the vertebrae, namely 3-4 mm lateral to the midline of C(2) vertebrae) was (21.3+/-2.7) mm (ranging 19.4-24.3 mm), with an a/b ratio of 1.3-1.5. The screws of TARP had a lateral tilt of 12.2 degrees+/-0.4 degrees(ranging 10.2 degrees-14.6 degrees) at C(1) and a medial tilt of 7.3 degrees+/-0.3 degrees (ranging 5.1 degrees-9.4 degrees) at C(2) relative to the coronal plane. CONCLUSIONS: An atlanto-axial surgery through transoral approach is safe and feasible. This approach is suitable for an anterior TARP internal fixation, and the design of the internal fixation system should be based on the above anatomical data.

Transoral atlantoaxial reduction plate fixation for irreducible atlantoaxial dislocation.

OBJECTIVE: To design a clinically applicable transoralpharyngeal atlantoaxial reduction plate (TARP), introduce the operation procedure, and evaluate its preliminary clinical effects. METHODS: A novel TARP system, including butterfly titanium alloy plate, self-locking screws, atlantoaxial reductor and other operational instruments was developed. This system was applied clinically on five patients with irreducible atlantoaxial dislocation of congenital or traumatic origin. During operation, the reduction was completed by the combined action of the plate and the atlantoaxial reductor after transoral joint release and cord decompression. Bone graft granules were implanted between the bilateral atlantoaxial joints and TARP was used to immobilize subsequently the atlas and axis. RESULTS: Clinical application demonstrated that TARP could induce instant reduction and that the method was operationally feasible and its postoperational effect was satisfactory. CONCLUSIONS: The design of TARP is novel. The operational procedure is simple and easy to use. Furthermore, instant reduction can be completed during the operation and the fixation is relatively stable. TARP is an ideal alternative for irreducible atlantoaxial dislocation and may have excellent prospects for further clinical applications.

[Anatomic evaluation the entry point of C2 pedicle screw].

OBJECTIVE: To study the relevant position of C(2) pedicle to C(2) inferior articular process, set up a technique of C(2) pedicle screw placement with the inferior articular process of axis as an anatomic landmark. METHODS: Fifty C(2) bone specimens were used to measure the distance from the sagittal midline to the medial border, the midpoint and the lateral border of C(2) inferior articular process or C(2) pedicle; the width and the height of the C(2) pedicle were also evaluated. The anatomic relation between the measurements data of C(2) pedicle and that of C(2) inferior articular process were analyzed, and the technique of C(2) pedicle screw fixation was established. RESULTS: The medial border of C(2) inferior articular process was averaged (3.67 +/- 0.41) mm lateral to that of C(2) pedicle, and the midpoint C(2) inferior articular process was averaged (1.15 +/- 0.44) mm lateral to the lateral border of C(2) pedicle, respectively. Using the C(2) inferior articular process as landmark, two techniques was established for C(2) pedicle screw placement. The entry point of method A was located in 2 mm medial and superior to the central point of C(2) inferior articular process; the entry point of method B was at the crossing point of the medial border C(2) inferior articular process with the superior quarter of C(2) inferior articular process. CONCLUSIONS: There is a steady anatomic relation between C(2) pedicle and C(2) inferior articular process, the C(2) inferior articular process could be as a convenient key anatomic landmark to determine the location of C(2) pedicle and the position of C(2) pedicle screw entry point.

An 11-Year Review of the TARP Procedure in the Treatment of Atlantoaxial Dislocation.

STUDY DESIGN: Retrospective study. OBJECTIVE: The aim of the study was to introduce the surgical techniques and evaluate the clinical outcomes of transoral atlantoaxial reduction plate (TARP) for the treatment of atlantoaxial dislocation. SUMMARY OF BACKGROUND DATA: Researchers have reported on transoral plate internal fixation for the treatment of irreducible atlantoaxial dislocation (IAAD) without long-term follow-up and detailed clinical experience. METHODS: The clinical records of 388 patients with atlantoaxial dislocation (IAAD, 340 cases; fixed atlantoaxial dislocation [FAAD], 48 cases) who received the TARP procedure from April 2003 to September 2014 were retrospectively reviewed. They were treated separately with TARP-I or TARP-II (82 cases), TARP-III (248 cases), or TARP-IV (58 cases). X-ray and magnetic resonance imaging were used to evaluate the efficacy of reduction and the degree of decompression, respectively. The long-term clinical outcome was evaluated by Japanese Orthopaedic Association scoring and the Symon and Lavender standard. RESULTS: Immediate reduction was achieved for all the patients with IAAD (340/340), whereas anatomical reduction was achieved for 98.2% of patients (334/340). Anatomical reduction was achieved in 87.5% of patients with FAAD (42/48). The average degree of spinal cord decompression ranged from 75% to 100% with an average of 88.4%. The clinical data of 106 patients were evaluated in the latest follow-up (12-108 mo, average 60.5 mo). The average spinal cord improvement rate by Japanese Orthopaedic Association scoring was 62.1%. According to the Symon and Lavender standard, there were 85 cases rated as markedly effective, 104 cases as effective, and 2 cases as noneffective. The overall markedly effective rate was 80% and the effective rate was 98%. CONCLUSION: The TARP procedure showed good anterior atlantoaxial release, reduction, decompression, and internal fixation for patients with IAAD and FAAD through a single anterior approach. It has the advantages of three-dimensional immediate atlantoaxial reduction and sufficient decompression. LEVEL OF EVIDENCE: 3.

[Anatomic identification of the location of the pedicle of atlas with the lateral mass of C2 to C4 as the landmark].

OBJECTIVE: To study the relevant position of the pedicle of C1 to the lateral mass of C(2-4), set up an identification technique for the entry point decision of C1 pedicle screw by using the lateral mass of C(2-4) as anatomic landmarks. METHODS: Twenty cadaver specimens were used to measure the distance from the sagittal midline of spine to the medial border, the midpoint and the lateral border of C1 pedicle or the lateral mass of C2, C3 or C4. The anatomic relation between the measurements data of C1 pedicle and that of the lateral masses of the cervical vertebrae were analyzed, and the technique of C1 pedicle screw fixation was established. RESULTS: The average medial border of the lateral mass of C2, C3 and C4 was 0.37 mm, 0.27 mm and 0.24 mm lateral to that of C1 pedicle, the average midpoint of the lateral mass of C2, C3 and C4 was 1.18 mm, 1.41 mm and 1.74 mm lateral to that of C1 pedicle, and the average lateral border of the lateral mass of C2, C3 and C4 was 1.96 mm, 2.54 mm and 3.24 mm lateral to that of C1 pedicle, respectively. CONCLUSION: There is a steady anatomic location relation between C1 pedicle and the lateral mass of C2, C3 or C4. As well as the lateral mass of C2, the lateral mass of C3 or that of C4 could be convenient anatomic landmarks to determine the location of C1 pedicle and the position of C1 pedicle screw entry point.