RESUMO
Interfacial solar vapor generation holds great promise for alleviating the global freshwater crisis, but its real-world application is limited by the efficiently choppy water evaporation and industrial production capability. Herein, a self-floating solar evaporator with an underwater aerophilic surface is innovatively fabricated by weaving core-shell yarns via mature weaving techniques. The core-shell yarns possess capillary water channels in the hydrophilic cotton core and can trap air in the hydrophobic electrospinning nanofiber shell when submerged underwater, simultaneously realizing controllable water supplies, stable self-flotation, and great thermal insulation. Consequently, the self-floating solar evaporator achieves an evaporation rate of 2.26 kg m-2 h-1 under 1 sun irradiation, with a reduced heat conduction of 70.18 W m-2. Additionally, for the first time, a solar evaporator can operate continuously in water with varying waveforms and intensities over 24 h, exhibiting an outdoor cumulative evaporation rate of 14.17 kg m-2 day-1.
RESUMO
SiC aerogels with their lightweight nature and exceptional thermal insulation properties have emerged as the most ideal materials for thermal protection in hypersonic vehicles; However, conventional SiC aerogels are prone to brittleness and mechanical degradation when exposed to complex loads such as shock and mechanical vibration. Hence, preserving the structural integrity of aerogels under the combined influence of thermal and mechanical external forces is crucial not only for stabling their thermal insulation performance but also for determining their practicality in harsh environments. This review focuses on the optimization of design based on the structure-performance of SiC aerogels, providing a comprehensive review of the inherent correlations among structural stability, mechanical properties, and insulation performance. First, the thermal transfer mechanism of aerogels from a microstructural perspective is studied, followed by the relationship between the building blocks of SiC aerogels (0D particles, 1D nanowires/nanofibers) and their compression performance (including compressive resilience, compressive strength, and fatigue resistance). Moreover, the strategy to improve the high-temperature oxidation resistance and insulation performance of SiC aerogels is explored. Lastly, the challenges and future breakthrough directions for SiC aerogels are presented.
RESUMO
Room-temperature phase change materials (RTPCMs) exhibit promise to address challenges in thermal energy storage and release, greatly aiding in numerous domains of human existence and productivity. The conventional RTPCMs undergo inevitable volume expansion, structural collapse, and diffusion of active ingredients while maintaining desirable phase change enthalpy and ideal phase change temperature. Here, a sol-gel 1D-induced growth approach is presented to fabricate meta nanofibers (Meta-NFs) comprised of vanadium dioxide with monoclinic crystal structure, and further achieve the editable phase change temperature from 68 to 37 °C through W-doping, which allowed for tailored length variation of the zigzag V-V bond. Subsequently, Meta-NFs are assembled into 3D aerogels with self-standing architecture, thereby enabling the independent use of the RTPCMs. The obtained metamaterials demonstrate not only the temperature-editing solid-solid phase transition, but also the stiffness of the ceramic matrix, exhibiting the thermal energy control capability at room temperature (37 °C), thermal insulation properties, temperature resistance, and flame retardancy. The effective creation of these fascinating metamaterials might offer new insights for next-generation and self-standing solid-solid RTPCMs.
RESUMO
Solar-driven interfacial desalination is widely considered to be a promising technology to address the global water crisis. This study proposes a novel electrospun nanofiber-based all-in-one vertically interfacial solar evaporator endowed with a high steam generation rate, steady omnidirectional evaporation, and enduring ultrahigh-salinity brine desalination. In particular, the electrospun nanofiber is collected into the tubular structure, followed by spraying with a dense crosslinked poly(vinyl alcohol) film, which renders them sufficiently strong for the preparation of a vertically array evaporator. The integrated evaporator made an individual capillary as a unit to form multiple thermal localization interfaces and steam dissipation channels, realizing zone heating of water. Thus a high steam generation rate exceeding 4.0 kg m-2 h-1 in pure water is demonstrated even under omnidirectional sunlight, and outperforms existing evaporators. Moreover, salt ions in the photothermal layer can be effectively transported to the water in capillaries and subsequently exchanged with the bulk water due to the strong action of capillary force, which ensures an ultrahigh desalination rate (≈12.5 kg m-2 h-1 under 3 sun) in 25 wt% concentration brine over 300 min. As such, this work provides a meaningful roadmap for the development of state-of-the-art solar-driven interfacial desalination.
RESUMO
The expeditious growth of wearable electronic devices has boomed the development of versatile smart textiles for personal health-related applications. In practice, integrated high-performance systems still face challenges of compromised breathability, high cost, and complicated manufacturing processes. Herein, a breathable fibrous membrane with dual-driven heating and electromagnetic interference (EMI) shielding performance is developed through a facile process of electrospinning followed by targeted conformal deposition. The approach constructs a robust hierarchically coaxial heterostructure consisting of elastic polymers as supportive "core" and dual-conductive components of polypyrrole and copper sulfide (CuS) nanosheets as continuous "sheath" at the fiber level. The CuS nanosheets with metal-like electrical conductivity demonstrate the promising potential to substitute the expensive conductive nano-materials with a complex fabricating process. The as-prepared fibrous membrane exhibits high electrical conductivity (70.38 S cm-1), exceptional active heating effects, including solar heating (saturation temperature of 69.7 °C at 1 sun) and Joule heating (75.2 °C at 2.9 V), and impressive EMI shielding performance (50.11 dB in the X-band), coupled with favorable air permeability (161.4 mm s-1 at 200 Pa) and efficient water vapor transmittance (118.9 g m-2 h). This work opens up a new avenue to fabricate versatile wearable devices for personal thermal management and health protection.
RESUMO
In this work, high-performance epoxy resin (EP) composites with simultaneous excellent thermal conductivity (TC) and outstanding electromagnetic shielding properties are fabricated through the structural synergy of 1D carbon nanotubes and 2D silver-modified boron nitride nanoplates (CNT/AgBNs) to erect microscopic 3D networks on long-range carbon fiber (CF) felt skeletons. The line-plane combination of CNT/AgBNs improve the interfacical bonding involving EP and CF felts and alleviate the phonon scattering at the interface. Eventually, the TC of the EP composites is enhanced by 333% (up to 0.91 W m-1 K-1 ) with respect to EP due to the efficient and orderly transmission of phonons along the 3D pathway. Meanwhile, the unique anisotropic structure of CF felt and exceptional insulating BNs diminishes the electronic conduction between CNT and CFs, which protects the through-plane insulating properties of EP composites. Furthermore, the EP composites present favorable electromagnetic shielding properties (51.36 dB) attributed to the multiple reflection and adsorption promoted by the multiple interfaces of stacked AgBNs and heterointerface among CNT/AgBNs, CF felt and EP. Given these distinguishing features, the high-performance EP composites open a convenient avenue for electromagnetic wave (EMW) shielding and thermal management applications.
RESUMO
Responsive thermochromic fiber materials capable of miniaturization and integrating comfortably and compliantly onto the soft and dynamically deforming human body are promising materials for visualized personal health monitoring. However, their development is hindered by monotonous colors, low-contrast color changes, and poor reversibility. Herein, full-color "off-on" thermochromic fluorescent fibers are prepared based on self-crystallinity phase change and Förster resonance energy transfer for long-term and passive body-temperature monitoring, especially for various personalized customization purposes. The off-on switching luminescence characteristic is derived from the reversible conversion of the dispersion state and fluorescent emission by fluorophores and quencher molecules, which are embedded in the matrix of a phase-change material, during the crystallizing/melting processes. The achievement of full-color fluorescence is attributed to the large modulation range of fluorescence colors according to primary color additive theory. These thermochromic fluorescent fibers exhibit good mechanical properties, fluorescent emission contrast, and reversibility, showing their great potential in flexible smart display devices. Moreover, the response temperature of the thermochromic fibers is controllable by adjusting the phase-change material, enabling body-temperature-triggered luminescence; this property highlights their potential for human body-temperature monitoring and personalized customization. This work presents a new strategy for designing and exploring flexible sensors with higher comprehensive performances.
Assuntos
Dispositivos Eletrônicos Vestíveis , Humanos , Monitorização Fisiológica/instrumentação , Monitorização Fisiológica/métodos , Cor , TemperaturaRESUMO
Interfacial solar vapor generation (ISVG) is an emerging technology to alleviate the global freshwater crisis. However, high-cost, low freshwater collection rate, and salt-blockage issues significantly hinder the practical application of solar-driven desalination devices based on ISVG. Herein, with a low-cost copper plate (CP), nonwoven fabric (NWF), and insulating ethylene-vinyl acetate foam (EVA foam), a multistage device is elaborately fabricated for highly efficient simultaneous freshwater and salt collection. In the designed solar-driven device, a superhydrophobic copper plate (SH-CP) serves as the condensation layer, facilitating rapid mass and heat transfer through dropwise condensation. Moreover, the hydrophilic NWF is designed with rational hydrophobic zones and specific high-salinity solution outlets (Design-NWF) to act as the water evaporation layer and facilitate directional salt collection. As a result, the multistage evaporator with eight stages exhibits a high water collection rate of 2.25 kg m-2 h-1 under 1 sun irradiation. In addition, the desalination device based on the eight-stage evaporator obtains a water collection rate of 13.44 kg m-2 and a salt collection rate of 1.77 kg m-2 per day under natural irradiation. More importantly, it can maintain a steady production for 15 days without obvious performance decay. This bifunctional multistage device provides a feasible and efficient approach for simultaneous desalination and solute collection.
Assuntos
Água Doce , Luz Solar , Salinidade , Purificação da ÁguaRESUMO
Electrospun fibers have received wide attention in various fields ranging from the environment and healthcare to energy. However, nearly all electrospun fibers suffer from a pseudonanoscale diameter, resulting in fabricated membranes with a large pore size and limited separation performance. Herein, we report a novel strategy based on manipulating the equilibrium of stretch deformation and phase separation of electrospun jets to develop true-nanoscale fibers for effective selective separation. The obtained fibers present true-nanoscale diameters (â¼67 nm), 1 order of magnitude less than those of common electrospun fibers, which endows the resultant membranes with remarkable nanostructural characteristics and separation performances in areas of protective textiles (waterproofness of 113 kPa and breathability of 4.1 kg m-2 d-1), air filtration (efficiency of 99.3% and pressure drop of 127.4 Pa), and water purification (flux of 81.5 kg m-2 h-1 and salt rejection of 99.94%). This work may shed light on developing high-performance separation materials for various applications.
RESUMO
Phase change materials (PCMs) are appealing for their fascinating capability of thermal reallocation, assisting widely in many areas of human productivity and life. However, it has remained a significant challenge to attain shape stability, temperature resistance, and microscale continuity in PCMs while maintaining sufficient phase change performance. Here we report a sol epitaxial fabrication strategy to create metal-insulator transition nanofibers (MIT-NFs) composed of monoclinic vanadium dioxide. The MIT-NFs are further assembled into self-standing two-dimensional membranes and three-dimensional aerogels with structural robustness. The resulting series of metal-insulator transition materials exhibits the integrated features of solid-solid phase change properties, shape stability, and thermal reallocation properties. The integral ceramic characteristic also provides the MIT-NFs with surface stiffness (54 GPa), temperature resistance (-196° to 330 °C), and thermal insulator properties. The successful fabrication of these captivating MIT materials may provide new perspectives for next-generation, shape-stable, and self-standing PCMs.
RESUMO
Solar-driven interface evaporation has been identified as a sustainable seawater desalination and water purification technology. Nonetheless, the evaporation performance is still restricted by salt deposition and heat loss owing to weak solar spectrum absorption, tortuous channels, and limited plane area of conventional photothermal material. Herein, the semiconductor nanofibrous aerogels with a narrow bandgap, vertically aligned channels, and a conical architecture are constructed by the multiscale synergetic engineering strategy, encompassing bandgap engineering at the atomic scale and structure engineering at the nano-micro scale. As a proof-of-concept demonstration, a Co-doped MoS2 nanofibrous aerogel is synthesized, which exhibits the entire solar absorption, superhydrophilic, and excellent thermal insulation, achieving a net evaporation rate of 1.62 kg m-2 h-1 under 1 sun irradiation, as well as a synergistically efficient dye ion adsorption function. This work opens up new possibilities for the development of solar evaporators for practical applications in clean water production.
RESUMO
Two-dimensional (2D) nanomaterials have been widely applied as building blocks of nanoporous materials for high-precision separations. However, most existing 2D nanomaterials suffer from poor continuity and a lack of interior linking, resulting in deteriorated performance when assembled into macroscopic bulk structures. Here, a unique superspreading-based phase inversion technique is proposed to directly construct 2D nanofibrous networks (NFNs) from a polymer solution. By tailoring capillary behavior, polymer solution droplets evolve into ultrathin liquid films through superspreading; manipulating phase instability, subsequently, enables the liquid film to phase invert into continuous nanostructured networks. The assembled single-layered NFNs possess integrated structural superiorities of 1D nanoscale fiber diameter (â¼40 nm) and 2D lateral infinity, exhibiting a weblike nanoarchitecture with extremely small through-pores (â¼100 nm). Our NFNs show remarkable performances in air filtration (PM0.3 removal) and water purification (microfiltration level). This creation of such attractive 2D fibrous nanomaterials can pave the way for versatile high-performance separation applications.
RESUMO
Smart membranes with protection and thermal-wet comfort are highly demanded in various fields. Nevertheless, the existing membranes suffer from a tradeoff dilemma of liquid resistance and moisture permeability, as well as poor thermoregulating ability. Herein, a novel strategy, based on the synchronous occurrence of humidity-induced electrospinning and electromeshing, is developed to synthesize a dual-network structured nanofiber/mesh for personal comfort management. Manipulating the ejection, deformation, and phase separation of spinning jets and charged droplets enables the creation of nanofibrous membranes composed of radiative cooling nanofibers and 2D nanostructured meshworks. With a combination of a true-nanoscale fiber (â¼70 nm) in 2D meshworks, a small pore size (0.84 µm), and a superhydrophobic surface (151.9°), the smart membranes present high liquid repellency (95.6 kPa), improved breathability (4.05 kg m-2 d-1), and remarkable cooling performance (7.9 °C cooler than commercial cotton fabrics). This strategy opens up a pathway to the design of advanced smart textiles for personal protection.
RESUMO
Extremely low temperature has posed huge burden on the public safety concerns and global economics, thereby calling for high-performance warmth retention materials to resist harsh environment. However, most present fibrous warmth retention materials are limited by their large fiber diameter and simple stacking structure, leading to heavy weight, weak mechanical property, and limited thermal insulation performance. Herein, an ultralight and mechanically robust polystyrene/polyurethane fibrous aerogel by direct electrospinning for warmth retention is reported. Manipulation of charge density and phase separation of charged jet allows for the direct assembly of fibrous aerogels consisting of interweaved curly wrinkled micro/nanofibers. The resultant curly wrinkled micro/nanofibrous aerogel possesses low density of 6.8 mg cm-3 and nearly full recovery from 1500-cycle deformations, exhibiting both ultralight feature and superelastic property. The aerogel also shows low thermal conductivity of 24.5 mW m-1 K-1 , making synthetic warmth retention materials superior to down feather possible. This work may shed light on developing versatile 3D micro/nanofibrous materials for environmental, biological, and energy applications.
RESUMO
Bi2 O3 /rare earth oxide biphasic absorbers are attractive for high-efficiency X-ray shielding due to the complementary X-ray absorption effects. However, its application is severely hindered by poor interphasic contact. Here, a new Janus interface engineering strategy is reported for the construction of continuous and flexible Bi2 O3 /Gd2 O3 crystal nanofibrous membranes (FJNMs) with micro/nano dual self-strengthening interphasic adhesion. This strategy facilitates online micro-interlocking between Bi2 O3 /Gd2 O3 nanofibers and in situ nano-grain fusion between Bi2 O3 /Gd2 O3 crystals, significantly enhancing the adhesive strength at the Bi2 O3 /Gd2 O3 interface. Additionally, the synergistic shielding effect from Bi2 O3 /Gd2 O3 absorption and multiple reflections in Bi2 O3 and Gd2 O3 crystal lattices make the nanofibrous membranes a superior X-ray radiation barrier. The FJNMs demonstrate integrated features of exceptional X-ray shielding efficiency (91%-100%), robust interfacial adhesion (lap-shear strength >3.8 MPa), prominent flexibility, lightweight, and outstanding breathability. The design concepts of fibrosing biphasic absorber assemblies pave the way for asymmetrically assembling biphasic materials, setting the stage for a fundamental shift in next-generation radiation shielding materials.
RESUMO
Waterproof and breathable membranes that prevent liquid water penetration, while allowing air and moisture transmission, have attracted significant attention for various applications. Electrospun nanofiber materials with adjustable pore structures, easily tunable wettability, and good pore connectivity, have shown significant potential for constructing waterproof and breathable membranes. Herein, a systematic overview of the recent progress in the design, fabrication, and application of waterproof and breathable nanofibrous membranes is provided. The various strategies for fabricating the membranes mainly including one-step electrospinning and post-treatment of nanofibers are given as a starting point for the discussion. The different design concepts and structural characteristics of each type of waterproof and breathable membrane are comprehensively analyzed. Then, some representative applications of the membranes are highlighted, involving personal protection, desalination, medical dressing, and electronics. Finally, the challenges and future perspectives associated with waterproof and breathable nanofibrous membranes are presented.
Assuntos
Membranas Artificiais , Nanofibras , Propriedades de Superfície , Bandagens , Nanofibras/química , Água/química , Molhabilidade , Equipamento de Proteção Individual , Eletrônica , Teste de MateriaisRESUMO
The mechanical model of melt-blown nonwovens (MNs) serves as the foundation for performance optimization, which can offer helpful guidance for product material selection, structural design, and cost control. However, it is challenging to describe the micromechanics failure mechanism of MNs using the traditional mechanical model, which aims to match the model curve with the experimental result at the macrolevel. Herein, a micromechanics failure model for MNs based on sliding-orientation competition is developed. Through in situ observations of fiber position changes and the fluctuation of stress-strain curves, fiber sliding and orientation are introduced into the failure process of MNs. Due to fiber bonding and static friction, only orientation happens during the first stage of stretching. In dramatic contrast, the fibers will slide and orient in the second stage of stretching to change their positions in response to the external force. Sliding friction, fiber bonding, and static friction make up the stress of MNs, and the conflict of fiber sliding and orientation causes variations in the stress. The model has been successfully applied to polylactic acid (PLA) MNs, which proves the effectiveness of the model in MNs.
RESUMO
Solar-driven interface desalination (SDID) is a promising and sustainable technology that produces freshwater from brine. Ionic hydrogels are effective evaporators, providing enhanced interaction with water and ions due to the charged groups on hydrophilic polymer networks. In this study, we developed a hydrogel-based solar steam generator with a gradient-charged (GC) structure for desalination. The gradient-charged groups' distribution on the hydrogels creates gradients of free water and osmotic pressure, realizing rapid water supplement as well as desalination of concentrated brine. Consequently, the GC hydrogel demonstrated an exceptional water evaporation rate, achieving a value as high as 2.61 kg m-2 h-1 in pure water and 1.72 kg m-2 h-1 on treating with 20 wt % NaCl solution under one sun illumination. Following the substantial solar-driven evaporation, impurities, including salt and other pollutants, were removed, thereby ensuring the purity of the condensed water. Overall, the GC hydrogel-based evaporator is a promising solution for SDID to achieve effective and sustainable water desalination.
RESUMO
Electrospun nanofiber materials have the advantages of good continuity, large specific surface areas, and high structural tunability, which provide many desirable characteristics for lithium-ion battery electrodes. Here, the principles and advantages of electrospinning technology are first elaborated, then the previous studies on high-performance nanofibrous electrode materials prepared by electrospinning technology are comprehensively summarized, and the correlation between 1D nanostructured materials and electrode performances is discussed. Finally, the remaining challenges of nanofibrous electrodes are proposed and some future study directions of this particular area are pointed out. This review provides new enlightenment for the design of nanofibrous electrodes toward high-performance lithium-ion batteries.
Assuntos
Nanofibras , Nanoestruturas , Nanofibras/química , Lítio/química , Nanoestruturas/química , Nanotecnologia , Eletrodos , ÍonsRESUMO
Face masks, as effective measures for passive air pollution control, are of fundamental importance, especially with the outbreak of emerging infectious diseases. Most existing masks are dense or thick, resulting in a lack of thermal/humidity comfort level; despite being worn tightly, they show limited PM0.3/pathogen removal. Here, we use a facile strategy to create air-conditioned masks using heterogeneous nanofibrous networks, based on an electrospinning/netting technique. Manipulation of the phase separation and self-assembly of charged jet/droplets by control of humidity-induced double diffusion and Taylor cone instability allows for the generation of air-conditioned masks consisting of radiative cooling wrinkled nanofibers and 2D nanostructured networks. Our masks show desirable microenvironment with high-efficiency PM0.3 removal (>99.988%), low air resistance (0.07% of atmospheric pressure), and remarkable radiative cooling capacity (â¼2.8 °C temperature and â¼10% humidity drop), making high-performance filtration and temperature/humidity management "always online". This work should make possible the development of high-performance, energy-saving, and scalable fiber textiles for various applications.