RESUMO
Qualitative and quantitative measurements of complex flows demand for fast single-shot fluorescence lifetime imaging (FLI) technology with high precision. A method, single-shot time-gated fluorescence lifetime imaging using three-frame images (TFI-TGFLI), is presented. To our knowledge, it is the first work to combine a three-gate rapid lifetime determination (RLD) scheme and a four-channel framing camera to achieve this goal. Different from previously proposed two-gate RLD schemes, TFI-TGFLI can provide a wider lifetime range 0.6 ~ 13ns with reasonable precision. The performances of the proposed approach have been examined by both Monte-Carlo simulations and toluene seeded gas mixing jet diagnosis experiments. The measured average lifetimes of the whole excited areas agree well with the results obtained by the streak camera, and they are 7.6ns (N2 = 7L/min; O2 < 0.1L/min) and 2.6ns (N2 = 19L/min; O2 = 1L/min) with the standard deviations of 1.7ns and 0.8ns among the lifetime image pixels, respectively. The concentration distributions of the quenchers and fluorescent species were further analyzed, and they are consistent with the experimental settings.
RESUMO
A new ultrafast all-optical solid-state framing camera (UASFC) capable of single-shot ultrafast imaging is proposed and experimentally demonstrated. It is composed of an ultrafast semiconductor chip (USC), an optical time-series system (TSS), and a spatial mapping device (SMD) with an USC to transform signal beam information to the probe beam, a TSS to convert the time axis to wavelength-polarization, and a SMD to map wavelength-polarization image to different spatial positions. In our recent proof-of-principle experiment, better performance than ever of this technique is confirmed by giving six frames with ~3 ps temporal resolution and ~30 lp/mm spatial resolution.