Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 3 de 3
Filtrar
Mais filtros

Base de dados
Tipo de documento
Intervalo de ano de publicação
1.
Opt Express ; 20(16): 18362-9, 2012 Jul 30.
Artigo em Inglês | MEDLINE | ID: mdl-23038387

RESUMO

We present a laser plasma based x-ray microscope for the water window employing a high-average power laser system for plasma generation. At 90 W laser power a brightness of 7.4 x 10(11) photons/(s x sr x µm(2)) was measured for the nitrogen Lyα line emission at 2.478 nm. Using a multilayer condenser mirror with 0.3 % reflectivity 10(6) photons/(µm(2) x s) were obtained in the object plane. Microscopy performed at a laser power of 60 W resolves 40 nm lines with an exposure time of 60 s. The exposure time can be further reduced to 20 s by the use of new multilayer condenser optics and operating the laser at its full power of 130 W.

2.
Appl Opt ; 32(10): 1811-6, 1993 Apr 01.
Artigo em Inglês | MEDLINE | ID: mdl-20820316

RESUMO

The thermal stability of Mo-Si multilayers prepared by magnetron sputtering is studied. It is found that degradation of x-ray reflectivity of Mo-Si multilayers under heat loading is connected with the roughening of Mo-Si interfaces and the formation of compounds Mo(x)Si(y),. To avoid these degradation mechanisms we fabricated and tested MoSi(2)-Si multilayers under heat loading. The MoSi(2)-Si multilayer appeared to be much more stable both in period and x-ray reflectivity because of thermodynamic equilibrium of the components MoSi(2) and Si at the interface. The working temperature of MoSi(2)-Si multilayers reaches 1000 K.

SELEÇÃO DE REFERÊNCIAS
Detalhe da pesquisa