RESUMO
The integrated optical delay line plays a crucial role in microwave photonic chips. Continuous tunability is a growing trend in filtering and beamforming techniques of microwave photonics. Based on the silicon platform, we present and experimentally demonstrate an integrated continuously optical tunable delay line (OTDL) chip, which contains a 4-bit optical switched delay line (OSDL) and a thermally tunable delay line based on grating-assisted Contradirectional coupler (CDC). The OSDL can achieve stepwise optical delays, while the CDC is introduced to improve delay tuning resolution within one step delay of the OSDL. The combination of the two modules can realize tuning delays from 0 to 160 ps. Additionally, it is easy to increase the maximum delay by cascading more optical switches. The experimental results demonstrate that the proposed OTDL shows outstanding performance and good expansibility.
RESUMO
The silicon thermo-optic switch (TOS) is one of the most fundamental and crucial blocks in large-scale silicon photonic integrated circuits (PICs). An energy-efficient silicon TOS with ultrahigh extinction ratio can effectively mitigate cross talk and reduce power consumption in optical systems. In this Letter, we demonstrate a silicon TOS based on cascading Mach-Zehnder interferometers (MZIs) with spiral thermo-optic phase shifters. The experimental results show that an ultrahigh extinction ratio of 58.8â dB is obtained, and the switching power consumption is as low as 2.32â mW/π without silicon air trench. The rise time and fall time of the silicon TOS are about 10.8 and 11.2â µs, respectively. Particularly, the figure of merit (FOM) has been improved compared with previously reported silicon TOS. The proposed silicon TOS may find potential applications in optical switch arrays, on-chip optical delay lines, etc.
RESUMO
We propose a low loss, wideband silicon transverse magnetic (TM) polarizer with high polarization extinction ratio and low reflection based on subwavelength grating. By arranging and optimizing a mutually perpendicular subwavelength grating with different duty cycles as the core and cladding, efficient waveguiding and radiation can be achieved for the TM and transverse electric (TE) injection, respectively. In simulation, the proposed TM polarizer has a footprint of 40µm×16.68µm, an insertion loss <0.7d B, a polarization extinction ratio ≥20d B, and an unwanted TE reflection <-17.4d B in the wavelength range of 1230-1700 nm. Moreover, the fabrication tolerance of the proposed device is also investigated.
RESUMO
We propose and experimentally demonstrate a scheme for the photonic generation of pulsed microwave signals with selectable frequency based on spectral shaping and wavelength-to-time mapping (WTTM) technique. The frequency selectivity is realized by channel switching on an integrated silicon-on-insulator (SOI) spectral shaping chip. The incident signal is spectrally shaped by the asymmetric Mach-Zehnder interferometer (MZI) in the selected channel, and an optical spectrum with uniform free spectral range (FSR) can be generated in a broad bandwidth up to dozens of nanometers, implying large microwave signal duration after WTTM if a pulse light source with matched bandwidth is available. Microwave pulses of frequency from 3.6â GHz to 28.4â GHz with a fixed interval are experimentally generated respectively. The realization of eight microwave frequencies selectable with only one shared dispersive element (DE) required indicates high expansibility in the frequency cover range of our scheme by tuning the dispersion value in WTTM.
RESUMO
Bandpass microwave photonic filter (MPF) can be achieved based on the well-known phase to intensity conversion method by using phase modulation and single micro-ring resonator (MRR) notch filter. Since MRR could introduce residual phase in handling one optical sideband, the out-of-band radio frequency (RF) rejection ratio and the shape factor of the bandpass MPF are very limited. Here, by introducing another MRR to handle the other optical sideband, the residual phase can be greatly suppressed, thus the filter's performance can be greatly improved. The proposed bandpass MPF was both verified theoretically and experimentally. Compared with the single MRR, the out-of-band RF rejection ratio and the shape factor were improved by 20â dB and 1.67, respectively. Furthermore, the bandpass MPF's bandwidth is reconfigurable by adjusting the optical carrier's frequency or the two MRRs' amplitude coupling coefficients. The bandpass MPF's center frequency is also tunable by changing the resonant wavelengths of two MRRs in the opposite direction simultaneously. Experimentally, bandwidth reconfiguration from 0.38â GHz to 15.74â GHz, the shape factor optimization from 2 to 1.23, and frequency tuning from 4â GHz to 21.5â GHz were achieved. We believe that the proposed bandpass MPF has great potential for microwave photonic signal processing.
RESUMO
A reconfigurable silicon microring filter, which is constructed by cascading a tunable Mach-Zehnder interferometer and a double injected silicon microring resonator with a variable input angle, is proposed and investigated. The spectra reconfigurations of the optical filter were simulated and analyzed using the transmission matrix method. The results show that when keeping the perimeter of the microring constant, the free spectral range (FSR) of the filter can be multiplied by adjusting the angle between the two injections. Moreover, by changing the coupling coefficients of the microring and the optical power ratio between the two injections, different types of spectral responses such as square, sinusoidal, and flat-top interleaver can be obtained. The device is simple and easy to integrate, and its capabilities to expand the FSR and spectral reconfiguration may have great potential in reconfigurable integrated optic chips.
RESUMO
Fano resonance with asymmetric line shape is very promising in many applications such as optical switching, sensing, slow light, laser. Fano resonances based on some integrated structures have been demonstrated on the silicon on insulator platform. However, the extinction ratios and slope rates of the most proposed integrated Fano resonances are relatively low, which limits their applications. In this paper, a tunable silicon nitride coupled resonator optical waveguide (CROW) embedded in a Mach-Zehnder interferometer (MZI) is proposed to achieve Fano resonance. Benefiting from fine tuning supported by the low thermo-optic coefficient of the silicon nitride optical waveguide, the optical amplitudes and phases in the two arms of the MZI were accurately adjusted to achieve destructive interference, which gives an ultra-high extinction ratio. Furthermore, high quality factor CROW, supported by the native low loss silicon nitride optical waveguide, greatly shrinks the resonance bandwidth. Combining the above two superiorities, a Fano resonance with a very high extinction ratio of up to 57 dB and slope rate as high as 8.1 × 104 dB/nm was obtained, which is an order of magnitude larger than the reported integrated Fano resonances. We believe that the proposed structure would be a promising candidate for high-performance switching and high-sensitivity sensing.
RESUMO
In this paper, based on the low loss double strip silicon nitride platform, we designed and fabricated an ultra-low loss 1×4 microwave photonic beamforming chip, which contains a 1×4 beam splitter and four 5-bit optical delay lines. Each optical delay line can achieve 32 delay states varying from 0 ps to about 130 ps, which can support 21 different beamforming angles covers from -56.42° to 56.68° for 10 GHz RF signal. A low on-chip insertion loss of about 4 dB is achieved for each 5-bit optical delay line. Furthermore, a very low loss delay ratio of about 0.0016 dB/ps is achieved and a recorded low loss fluctuation of about 0.3 dB is obtained during the 32 states delay switching. In addition, the switching speed and driving power consumptions of the proposed beamforming chip were investigated. The proposed beamforming chip could have great potential in optical controlled phased antenna arrays systems.
RESUMO
Microwave frequency combs (MFCs) have important applications in communication and sensing owing to their characteristics of large number of comb lines, wide frequency range, and high precision of comb spacing. In many applications, MFCs are required to emit signals with tunable center frequency and variable comb spacing to accommodate different operating frequency bands and accuracies. Here, we demonstrate a tunable MFC by injecting a low-frequency electrical signal into a tunable optoelectronic oscillator (OEO). Tuning of MFC's center frequency and comb spacing are realized, allowing a frequency tuning range from 1 to 22 GHz and 50 comb lines within a 5 MHz bandwidth obtained in the MFC generator. In addition, the introduction of the silicon nitride micro-disk resonator (Si3N4-MDR) in the system paves the way for the integration of MFC generator.
RESUMO
A compact and broadband silicon mode-order converter (MOC) scheme by employing reciprocal mode evolution between asymmetric input/output taper and bricked subwavelength gratings (BSWG) is proposed. In the proposed MOC, a quasi-TE0 mode is generated in the BSWG region, which can be regarded as an effective bridge between the two TE modes to be converted. Flexible mode conversion can be realized by only choosing appropriate structure parameters for specific mode transitions between input/output modes and the quasi-TE0 mode. By combing 3D finite difference time domain (FDTD) and particle swarm optimization (PSO) method, TE0-TE1 and TE0-TE2 MOCs are optimal designed, which can efficiently convert TE0 mode to TE1 and TE2 modes with lengths of 9.39 µm and 11.27 µm, respectively. Results show that the insertion losses of <1 dB and crosstalk of <-15 dB are achieved for both TE0-TE1 and TE0-TE2 MOCs, the corresponding working bandwidth are 128 nm (1511â¼1639 nm) and 126 nm (1527â¼1653 nm), respectively. Additionally, the MOCs can be fabricated with only single etch step with minimum feature size of 145 nm.
RESUMO
A silicon on-chip spectral shaper based on a Sagnac loop incorporating a chirped multi-mode waveguide Bragg grating (WBG) for linearly chirped microwave waveform generation is fabricated and demonstrated. The transmission spectrum of the spectral shaper displays low insertion loss characteristic due to the application of edge coupling taper and multi-mode waveguide based grating. An up-chirped microwave waveform with bandwidth as large as 44â GHz is generated by mapping the spectrum profile of the spectral shaper to the temporal domain through a dispersion fiber. The instantaneous frequency of the generated signal shows good linearity benefiting from the weak modulation strength in the multi-mode WBG. The low insertion loss performance as well as the low dispersion value required in our design presents feasibility in further integration with on-chip dispersion.
RESUMO
The ability to achieve low phase noise single-mode oscillation within an optoelectronic oscillator (OEO) is of fundamental importance. In the frequency-tunable OEO, the wide microwave photonic filter (MPF) bandwidth is detrimental to select single-mode among the large number of cavity modes, thus leading to low signal quality and spectral purity. Stable single-mode oscillation can be achieved in a large time delay OEO system by harnessing the mechanism from parity-time (PT) symmetry. Here, a PT-symmetric tunable OEO based on dual-wavelength and cascaded phase-shifted fiber gratings (PS-FBGs) in a single-loop is proposed and experimentally demonstrated. Combining the merits of wide frequency tuning of PS-FBG-based MPF and single mode selection completed by the PT-symmetric architecture of the OEO, where the gain and loss modes carried by dual-wavelengths to form two mutually coupled resonators in a single-loop, signals range from 1 GHz to 22 GHz with the low phase noise distributed in -122â¼ -130 dBc/Hz at 10 kHz offset frequency are obtained in the experiment.
RESUMO
In this paper, theoretical modeling and numerical simulations of a high-performance polarization beam splitter (PBS) based on hetero-anisotropic metamaterials are proposed on the lithium-niobate-on-insulator (LNOI) platform. The hetero-anisotropic metamaterials constructed by sub-wavelength gratings (SWGs) can be regarded as effective anisotropy medium, which exhibits strong birefringence without breaking the geometrical symmetry, contributing to the formation of PBS. Rather than the principle of PBS based on beat-length difference of transverse electric (TE) polarization and transverse magnetic (TM) polarization, the device can realize polarization beam splitting in single beat length, and the footprint of the proposed PBS can be reduced to 8 µm × 160 µm (with S-bend). The simulation results show that the bandwidth is 185â nm (1450â¼1634â nm) for TE polarization while the bandwidth is 85â nm (1490â¼1575â nm) for TM polarization when the polarization extinction ratio is >20â dB. Furthermore, the insertion loss is less than 1â dB in the range of 1450 to 1650â nm, for both TE and TM polarization. Additionally, the proposed device proves strong robustness of the fabrication tolerance.
RESUMO
A novel scheme of silicon-assisted surface enhanced fluorescence (SEF) is presented for SEF-based assays, where the blank signal suppression and the fluorescence signal enhancement is combined. The P-doped, (100) oriented silicon substrate is used to quench the fluorescence of Rose Bengal (RB) molecules attached to it, resulting in an effectively suppressed background signal, which is useful for a lower limit of detection (LOD). When a proper quantity of silver nanoparticles (AgNPs) is deposited on the RB-attached silicon substrate, a significant fluorescence enhancement of up to around 290 fold is obtained, which helps to improve the sensitivity in fluorescence-based assays. Besides, conventional gold nanoparticles (AuNPs) have also been demonstrated to exhibit excellent SEF effect using the presented scheme, providing improved stability and biocompatibility. The mechanism of the observed SEF effect has been investigated, and both the decreased apparent quantum yield and the silicon-induced electric field redistribution are considered to play important roles. The experimental results suggest that the presented scheme holds great potential in the SEF-based assays aiming at higher sensitivity and lower LOD.
RESUMO
The optoelectronic oscillator (OEO) generates low-phase noise and high-frequency microwave signals thanks to a high Q-factor cavity with long and low-loss fiber delay. Traditionally, for the desired mode selection from the ultradense cavity modes, a narrowband electrical filter is needed, whose frequency tuning is very limited. On the other hand, for a tunable OEO offered by a microwave photonic filter (MPF), a paradox existed between the large number of cavity modes and the wide MPF bandwidth. Here, we achieve a tunable OEO using the mode-selection mechanism of parity-time symmetry, which overcomes the paradox. A high Q-factor silicon nitride microdisk resonator (Si3N4 MDR) is introduced to achieve frequency filtering and tuning. Moreover, the experimental results reveal that the tunable OEO generates a signal range from 3 GHz to 20 GHz with a phase noise about -120dBc/Hz at a 10 kHz offset frequency.
RESUMO
Being a new class of materials, transition metal dichalcogenides are paving the way for applications in atomically thin optoelectronics. However, the intrinsically weak light-matter interaction and the lack of manipulation ability has lead to poor light emission and tunable behavior. Here, we investigate the fluorescence characteristic of monolayer molybdenum disulfide on a metal narrow-slit grating, where a highly efficient, 471 times photoluminescence enhancement are realized, based on the hybrid surface plasmon polaritons resonances and the decreased influence of substrate. Moreover, the emitted intensity and polarization are controllable due to the polarization-dependent characteristic and anisotropy of grating. The manipulations of light-matter interactions in this special system provide a new insight into the fluorescent emission process and open a new avenue for high-performance low dimensional materials devices designs.
RESUMO
A tunable bandpass microwave photonic filter can be achieved by using a notch ring resonator with optical phase modulation. However, the filter's out of band rejection ratio and shape factor are limited due to the ring resonator's residual phase, which can seriously degrade the filter's performance. By using dual optical carriers and setting their wavelengths oppositely detuned from two resonant frequencies of a notch ring resonator, the residual phase induced by the ring resonator at radio frequencies falling outside the region of the notch stopband is reduced, thus the out-of-band rejection ratio and shape factor of the microwave photonic filter are greatly improved. The proposed microwave photonic filter was both verified theoretically and experimentally. Compared with single optical carrier method, the out-of-band rejection ratio of the filter can be enhanced from 17.7dB to 31.5dB, and the filter's shape factor is improved from 3.05 to 1.78. Besides, the filter's frequency and bandwidth can be tuned by varying the wavelengths of the two optical carriers and the ring resonator's coupling coefficients. Finally, a tunable bandpass microwave photonic filter with frequency tuning range of 2~14GHz, 3dB bandwidth tuning range of 0.673~2.798GHz is demonstrated.
RESUMO
Isolating and in situ profiling the heterogeneous molecular phenotype of circulating tumor cells are of great significance for clinical cancer diagnosis and personalized therapy. Herein, an on-chip strategy is proposed that combines size-based microfluidic cell isolation with multiple spectrally orthogonal surface-enhanced Raman spectroscopy (SERS) analysis for in situ profiling of cell membrane proteins and identification of cancer subpopulations. With the developed microfluidic chip, tumor cells are sieved from blood on the basis of size discrepancy. To enable multiplex phenotypic analysis, three kinds of spectrally orthogonal SERS aptamer nanovectors are designed, providing individual cells with composite spectral signatures in accordance with surface protein expression. Next, to statistically demultiplex the complex SERS signature and profile the cellular proteomic phenotype, a revised classic least square algorithm is employed to obtain the 3D phenotypic information at single-cell resolution. Combined with categorization algorithm partial least square discriminate analysis, cells from different human breast cancer subtypes can be reliably classified with high sensitivity and selectivity. The results demonstrate that this platform can identify cancer subtypes with the spectral information correlated to the clinically relevant surface receptors, which holds great potential for clinical cancer diagnosis and precision medicine.
Assuntos
Microfluídica/métodos , Nanopartículas/química , Células Neoplásicas Circulantes/patologia , Análise Espectral Raman/métodos , Algoritmos , Aptâmeros de Nucleotídeos/química , Linhagem Celular Tumoral , Análise Discriminante , Humanos , Análise dos Mínimos Quadrados , Análise Multivariada , Nanopartículas/ultraestrutura , Fenótipo , Análise de Célula ÚnicaRESUMO
In this paper, we theoretically propose an effective broadband absorption architecture in mid-infrared region based on strong coupling between the plasmonic resonance of graphene nanoribbons and the waveguide mode of a metal tapered groove. The special architecture facilitates two new hybrid modes splitting with very strong energy distribution on graphene ribbon, which results in the broadband absorption effect. To well explain these numerical results, an analytical dispersion relation of waveguide mode is obtained based on the classical LC circuit model. The fluctuating range of absorption passband is investigated by adjusting the filled medium inside of the grooves. Leveraging the concept and method, a broadband flat-top (bandwidth ≈2.5 µm) absorption with absorption rate over 60% is demonstrated. Such a design not only enhances the intrinsic weak plasmons resonance in mid-infrared spectral region, but also reduces the absorption fluctuations caused by coupling, which are the key features for developing next-generation mid-infrared broadband optical devices.
RESUMO
A graphene electro-absorption optical modulator based on double-stripe silicon nitride waveguide is proposed and analyzed. By embedding four graphene layers in the double-stripe silicon nitride waveguide and the graphene layers co-electrode design, the total metal-graphene contact resistance can be reduced 50% and as high as 30.6GHz modulation bandwidth can be achieved theoretically. The calculated extinction ratio and figure of merit are 0.1658dB/um and 9.7, respectively. And the required switching voltage from its minimum to maximum absorption state is 3.8180V and 780.50fJ/bit power consuming can be achieved. The proposed modulator can remedy the lack of high speed modulator on the passive silicon nitride waveguide.