The global magnitude and temporal trend of rheumatoid arthritis burden attributable to smoking from 1990 to 2019.

OBJECTIVES: The relationship between smoking and RA has been confirmed. Most nations have ratified the Framework Convention on Tobacco Control. However, there are considerable regional differences in how effectively tobacco control measures were implemented. This study was carried out to estimate the spatiotemporal trends of smoking-related RA burdens. METHODS: Data were available from the Global Burden of Disease Study 2019 and were analysed by age, sex, year and region. Joinpoint regression analysis was applied to the analysis of temporal trends in the RA burden resulting from smoking over 30 years. RESULTS: From 1990 to 2019, the number of global RA cases increased each year. The age-standardized prevalence, death and disability-adjusted life-year (DALY) rates also increased. However, there was a wave in the changing trend of the age-standardized death rate, with the lowest point in 2012 and the highest point in 1990. Smoking, in particular, was responsible for 11.9% of total RA deaths and 12.8% of total DALYs in 1990 but only 8.5% of total RA deaths and 9.6% of total DALYs in 2019. A greater burden from smoking exposure was borne by men, older adults and people living in high-middle and high sociodemographic index (SDI) countries and regions. Moreover, the UK demonstrated the highest reduction in age-standardized death and DALY rates over the three decades. CONCLUSION: There were reductions in the age-standardized burdens of RA caused by smoking worldwide. Nevertheless, this continues to be an issue in some areas, and efforts to reduce smoking should be made to lessen this growing burden.

[Formulation of expert consensus on clinical application of external ethnic medicine: taking Baimai Ointment as an example].

The concept of ethnic medicine is divided into a broad sense and a narrow sense. The broad concept refers to the traditional medicine of the Chinese nation, and the narrow concept refers to the traditional medicine of Chinese ethnic minorities. The external medicine is one of the main forms of ethnic medicine, and it is also the important content of ethnic medicine for external use, which is widely used in clinical practice. As the theory of ethnic medicine is unique, the application methods have certain characteristics, which are the key technical parts of clinical practice. However, the existing traditional Chinese medicine consensus formulation me-thods cannot meet the needs of the consensus formulation of the external ethnic medicine. Therefore, the methods suitable for expert consensus on external ethnic medicine are required. This article took Expert opinion on clinical application of Baimai Ointment as an exa-mple, and explorde a reasonable, effective, multi-dimensional, and multi-stage method to formulate expert consensus on the external ethnic medicine. In this research, three-dimensional sources of information, including ancient classics, clinical research evidence, and expert application experiences, were systematically and scientifically collected. After organization and analysis, the information was formed into comprehensive evidence. In a formal consensus meeting, part of the recommendations reached consensus. As to the issues that did not reach agreement, in-depth interviews were used to explore the reasons for the differences and resolve the disagreements. Finally, unanimous recommendations were reached. There are common problems during the formulation process of Expert opinion on clinical application of Baimai Ointment. This study is expected to provide references for the formulation of expert consensus on other external ethnic medicine.

[Systematic review and Meta-analysis of Gusongbao preparation in treatment of primary osteoporosis].

This study aims to provide evidence for clinical practice by systematically reviewing the efficacy and safety of Gusongbao preparation in the treatment of primary osteoporosis(POP). The relevant papers were retrieved from four Chinese academic journal databases and four English academic journal databases(from inception to May 31, 2022). The randomized controlled trial(RCT) of Gusongbao preparation in the treatment of POP was included after screening according to the inclusion and exclusion criteria. The quality of articles was evaluated using risk assessment tools, and the extracted data were subjected to Meta-analysis in RevMan 5.3. A total of 657 articles were retrieved, in which 15 articles were included in this study, which involved 16 RCTs. A total of 3 292 patients(1 071 in the observation group and 2 221 in the control group) were included in this study. In the treatment of POP, Gusongbao preparation+conventional treatment was superior to conventional treatment alone in terms of increasing lumbar spine(L2-L4) bone mineral density(MD=0.03, 95%CI[0.02, 0.04], P<0.000 01) and femoral neck bone mineral density, reducing low back pain(MD=-1.69, 95%CI[-2.46,-0.92], P<0.000 1) and improving clinical efficacy(RR=1.36, 95%CI[1.21, 1.53], P<0.000 01). Gusongbao preparation was comparable to similar Chinese patent medicines in terms of improving clinical efficacy(RR=0.95, 95%CI[0.86, 1.04], P=0.23). Gusongbao preparation was inferior to similar Chinese patent medicines in reducing traditional Chinese medicine syndrome scores(MD=1.08, 95%CI[0.44, 1.71], P=0.000 9) and improving Chinese medicine syndrome efficacy(RR=0.89, 95%CI[0.83, 0.95], P=0.000 4). The incidence of adverse reactions of Gusongbao preparation alone or combined with conventio-nal treatment was comparable to that of similar Chinese patent medicines(RR=0.98, 95%CI[0.57, 1.69], P=0.94) or conventio-nal treatment(RR=0.73, 95%CI[0.38, 1.42], P=0.35), and the adverse reactions were mainly gastrointestinal discomforts. According to the available data, Gusongbao preparation combined with conventional treatment is more effective than conventional treatment alone in increasing lumbar spine(L2-L4) bone mineral density and femoral neck bone mineral density, reducing low back pain, and improving clinical efficacy. The adverse reactions of Gusongbao preparation were mainly gastrointestinal discomforts, which were mild.

[Experts consensus statement on Cheezheng Xiaotong Tiegao in clinical practice].

Cheezheng Xiaotong Tiegao is a Tibetan traditional prescription,which has the functions of promoting blood circulation,relieving swelling and relieving pain. It has been widely used in various clinical departments such as orthopedics department,rheumatology department,pain management department,and rehabilitation department to treat all types of acute and chronic skeletal muscle pain. However,duet to the lack of detailed description of the specific use of various diseases in its manual,and in the published guidelines,monographs,and clinical reports,the introduction of the dominant clinical disease,usage,treatment,safety,etc. of Cheezheng Xiaotong Tiegao is not detailed. Therefore,this experts consensus statement has been prepared based on the research and analysis of clinicians and patients,evidence-based medical research and evaluation,combined with the experience of clinical experts. The experts consensus statement regulates usage,dosage,combination,safety,etc. in the treatment of acute and chronic contusion( soft tissue injury),osteoarthritis,low back pain,frozen shoulder,cervical spondylosis postoperative recovery pain and other pain relief and other skeletal muscle system diseases to provide evidence and reference for the rational and safety using of Cheezheng Xiaotong Tiegao.

[Preparation instructions for Experts consensus statement on Cheezheng Xiaotong Tiegao in clinical practice].

As a topical plaster developed by modern pharmaceutical technology based on traditional Tibetan medicine,Cheezheng Xiaotong Tiegao has functions of promoting blood circulation,relieving swelling and relieving pain. Since its introduction in 1993,it has been widely used in the treatment of various types of acute and chronic musculoskeletal pain and various types of spinal,joint and soft tissue diseases. In order to better standardize the clinical application and improve the clinical efficacy of Cheezheng Xiaotong Tiegao,the research and development work of the Experts consensus statement on Cheezheng Xiaotong Tiegao in clinical practice was officially launched on October 19,2017,upon approval from China Association of Chinese Medicine. In this paper,main R&D process and related technical links for the experts consensus on Cheezheng Xiaotong Tiegao would be summarized,which will help the various medical workers understand,master and apply more accurately,and also provide reference for the development of experts consensus on clinical application of other topical Chinese medicines.

A finite element study of traditional Chinese cervical manipulation.

PURPOSE: Traditional Chinese cervical manipulation (TCCM) has been claimed as an effective treatment for diseases of the cervical spine, but its biomechanical effects on the vertebral body and intervertebral discs remain unclear. The aim of this study was to develop and validate a detailed finite element model of cervical spine, which was then used to investigate the biomechanical response of the cervical spine to TCCM. METHODS: The model of a C2-T1 cervical spine was constructed based on CT images of a healthy male volunteer and validated against published in vitro studies under different loading conditions. The detailed force-time data of TCCM were measured on the same volunteer through dynamometric diaphragms. The data were applied on the validated finite element model to simulate TCCM. RESULTS: The current model could offer potentials to effectively reflect the behavior of human cervical spine suitable for biomechanics studies of TCCM. Under simulated TCCM condition, the stress distributions in cervical spine and intervertebral discs could not be completely explained through the traditional theory. CONCLUSION: Spinal manipulation, or TCCM, might play no role in reducing intradiscal pressure for treating cervical spondylosis. It could cause less stress concentration in intervertebral discs while operating spinal manipulation or TCCM when the adjustment points was chosen near the root of spinous process than the top of spinous process.

Interlocking intramedullary nail fixation with additional bone grafting from trochanter via a femoral hollow trephine in the treatment of femoral shaft fractures: design and clinical application.

PURPOSE: The purpose of this study was to describe and evaluate the clinical application of the technique of interlocking intramedullary (IM) nailing via an entry point at the tip of greater trochanter using a specially designed femoral hollow trephine to stabilize diaphyseal fractures of the femur. METHODS: From February 2010 to April 2014, 35 consecutive patients with femoral shaft fractures were treated by the therapy of bone grafting from trochanter region with interlocking IM nail. The average age of these 23 male and 12 female patients was 37.5 years (range, 22-67 years). Fractures were classified according to AO classification system (15 type A, 17 type B, 3 type C). Femoral canal reaming and the collection of cancellous bone were simultaneously performed in a single step with the specially designed femoral hollow trephine, followed by regular IM nailing procedure. RESULTS: Of the 35 cases, the mean volume of spongy bone obtained was 5.63 cm3 (range, 3.0-7.0 cm3). Thirty-five patients with femoral shaft fractures had a mean follow-up period of 16.2 months (range, 12-22 months). All patients achieved bony union, at a mean of 5.4 months (range, 4-6 months). No patient developed a delayed union or a nonunion. There were no complications such as infections, injury of vascular and nerve, or heterotopic ossification in hip. CONCLUSIONS: These results indicate that the technique of use of IM nailing with the femoral hollow trephine significantly decreases the occurrence of nonunion in femoral shaft fractures.

Open vs. closed reduction combined with minimally invasive plate osteosynthesis in humeral fractures.

Aim To explore a more effective surgical procedure, the outcomes of closed manipulative reduction (CMR) combined with minimally invasive plate osteosynthesis (MIPO) and conventional open reduction and internal fixation (ORIF) for treating proximal humeral fractures were compared. Material and methods In a retrospective study of patients operated for humerus shaft fractures from April 2008 to July 2011, the outcomes of 33 patients treated with CMR/MIPO were compared with the outcomes of 42 patients treated with ORIF. The fractures were classified, and the incision length, blood transfusion, operating time, as well as the VAS (Visual Analog Scale) pain scores were analyzed. The neck-shaft angles of the proximal humerus were detected, and the postoperative function of the shoulder was evaluated. Results The mean values of incision length, blood transfusion, and VAS pain scores at the 1st and 3rd day after CMR/MIPO and operation time were lower than that of ORIF. The postoperative radiographs verified good position of all screws and satisfactory bone fracture reduction in both groups. Meanwhile, in the ORIF group, nonunion (three cases) and humeral head necrosis (four cases) were detected. Conclusions The MR/MIPO technique showed smaller incisions, easier operation, less blood transfusion and more effective recovery of shoulder joint function for treating proximal humeral fractures than ORIF.

[Development and Validation of a Three-Dimensional Finite Element Model of Inferior Cervical Spinal Segments C(4-7) for a Healthy Person].

This study aims to develop and validate a three-dimensional finite element model of inferior cervical spinal segments C4-7of a healthy volunteer,and to provide a computational platform for investigating the biomechanical mechanism of treating cervical vertebra disease with Traditional Chinese Traumotology Manipulation(TCTM).A series of computed tomography(CT)images of C4-7segments were processed to establish the finite element model using softwares Mimics 17.0,Geromagic12.0,and Abaqus 6.13.A reference point(RP)was created on the endplate of C4 and coupled with all nodes of C4.All loads(±0.5,±1,±1.5and±2Nm)were added to the RP for the six simulations(flexion,extension,lateral bending and axial rotation).Then,the range of motion of each segment was calculated and compared with experimental measurements of in vitro studies.On the other hand,1Nm moment was loaded on the model to observe the main stress regions of the model in different status.We successfully established a detail model of inferior cervical spinal segments C4-7of a healthy volunteer with 591 459 elements and 121 446 nodes which contains the structure of the vertebra,intervertebral discs,ligaments and facet joints.The model showed an accordance result after the comparison with the in vitro studies in the six simulations.Moreover,the main stress region occurred on the model could reflect the main stress distribution of normal human cervical spine.The model is accurate and realistic which is consistent with the biomechanical properties of the cervical spine.The model can be used to explore the biomechanical mechanism of treating cervical vertebra disease with TCTM.

Osthole Inhibits Proliferation and Induces Catabolism in Rat Chondrocytes and Cartilage Tissue.

BACKGROUND/AIMS: Cartilage destruction is thought to be the major mediator of osteoarthritis. Recent studies suggest that inhibition of subchrondral bone loss by anti-osteoporosis (OP) drug can protect cartilige erosion. Osthole, as a promising agent for treating osteoporosis, may show potential in treating osteoarthritis. The purpose of this study was to investigate whether Osthole affects the proliferation and catabolism of rat chondrocytes, and the degeneration of cartilage explants. METHODS: Rat chondrocytes were treated with Osthole (0 µM, 6.25 µM, 12.5 µM, and 25 µM) with or without IL1-ß (10ng/ml) for 24 hours. The expression levels of type II collagen and MMP13 were detected by western Blot. Marker genes for chondrocytes (A-can and Sox9), matrix metalloproteinases (MMPs), aggrecanases (ADAMTS5) and genes implicated in extracellular matrix catabolism were evaluated by qPCR. Cell proliferation was assessed by measuring proliferating cell nuclear antigen (PCNA) expression and fluorescence activated cell sorter. Wnt7b/ß-catenin signaling was also investigated. Cartilage explants from two-week old SD rats were cultured with IL-1ß, Osthole and Osthole plus IL-1ß for four days and glycosaminoglycan (GAG) synthesis was assessed with toluidine blue staining and Safranine O/Fast Green FCF staining, collagen type II expression was detected by immunofuorescence. RESULTS: Osthole reduced expression of chondrocyte markers and increased expression of MMP13, ADAMTS5 and MMP9 in a dose-dependent manner. Catabolic gene expression levels were further improved by Osthole plus IL-1ß. Osthole inhibited chondrocyte proliferation. GAG synthesis and type II collagen were decreased in both the IL-1ß groups and the Osthole groups, and significantly reduced by Osthole plus IL-1ß. CONCLUSIONS: Our data suggested that Osthole increases the catabolism of rat chondrocytes and cartilage explants, this effect might be mediated through inhibiting Wnt7b/ß-catenin pathway.

[Radiological study on rat lumbar vertebral semidislocation model].

OBJECTIVE: To investigate the impact of fixation in part lumbar segment on rat model with radiography. METHODS: One hundred and twenty SPF male SD rats (350～450g) were randomly divided into simple fixation group (SF group), rotary fixation group (RF group) and sham-operation group (Sham group). The external link fixation system was implanted into the L4-L6 of SF group and RF group rats. In RF group, L5 spinous process of rats was rotated to the right side, making the L4, L6 and L5 spinous process not in a straight line. In SF group, the external link fixation system was implanted simply and not rotated. The anterior and posterior diameter in the intervertebral space and the distance between spinous processes were examined 1, 4, 8 and 12 weeks after fixation. RESULTS: The anterior diameter in the intervertebral space between L3-L4, L4-L5, L5-L6, and L6-S1 of SF groups 4 weeks after fixation were 28.11 ± 3.94, 25.73 ± 4.70, 29.51 ± 6.34 and 34.97 ± 4.65 pixels; the posterior diameter were 7.39 ± 1.63, 6.65 ± 1.76, 7.02±1.52 and 9.62 ± 2.50 pixels; the distance between spinous process were 39.33 ± 11.74, 14.11 ± 5.75, 21.32 ± 6.84 and 77.43 ± 13.69 pixels, the values were less than those in Sham groups (P<0.05). The anterior and posterior diameter in the intervertebral space and the distance between spinous process of SF groups 8 and 12 weeks after fixation continuously decreased compared with Sham group rats (P<0.05). The results of RF groups were consistent with the measurement of SF groups, the anterior and posterior diameter in the intervertebral space and the distance between spinous process of RF group rats were less than those in Sham groups 4, 8 and 12 weeks after fixation (P<0.05). Osteophyte formation was observed in SF and RF groups 8 weeks after fixation. CONCLUSION: The fixation in part lumbar segment can result in the decrease of intervertebral space and the formation of osteophytes.

[Construction of a human cervical spine with bilateral vertebral artery fluid-solid coupling model].

OBJECTIVE: To construct a human cervical spine with bilateral vertebral artery fluid-solid coupling model. METHODS: Helical CT images under the principle of reverse engineering and meshed in finite element model（FEM） related software were used to establish a human cervical spine with bilateral vertebral artery fluid-solid coupling model. In the process of modeling of vertebral body, vertebral artery, ligament, intervertebral disc, cartilage and endplate large anatomic data and cadaver experiments results were referenced. From the morphology and function the simulation of model with real physiological status was tested. RESULTS: The study showed that the stress concentration on the surface of vertebral body and the blood wall of the bilateral vertebral artery, and the result of the volume flow rate-time curve of bilateral vertebral artery of the model were consistent with the published literatures. This model was well consistent with the clinical phenomenon. CONCLUSION: The three-dimensional FEM of the human cervical spine established by the introduced method has been effectively verified. The modeling method would provide a new tool for research on the cervical spine biomechanics.

[Development of Chinese version vertigo symptom scale (VSS): reliability and validity].

OBJECTIVE: To develop a Chinese version of Vertigo Symptom Scale (VSS-C) and to examine its reliability and validity. METHODS: The VSS was translated into Chinese and developed a Chinese version VSS (VSS-C) with the consent of the author. The VSS-C scale was tested in 52 subjects with cervical spondylosis of vertebral artery type (CSA group) and 21 healthy subjects (control group). In CSA group VSS-C scale and SF-36 scale investigation was performed for 2 times with 1 week interval, after receiving 1-week orthopedic rehabilitation the patients were evaluated with the VSS-C and SF-36 scale; while subjects in control group received the investigation twice in two weeks. The reliability of the scale was evaluated with Cronbach's alpha method and the correlation between SF-36 scale and the VSS-C were also evaluated for the validity. RESULTS: The internal consistency of VSS-C was good with Cronbach's alpha of 0.886. Test-retest reliability was also very good with an intraclass correlation coefficient (ICC) between two time points, being 0.970 for VSS-C, 0.965 for VSS-AA and 0.992 for the VSS-VER. Regarding concurrent validity, significant low correlation was found between the VSS-AA and VSS-VER (r=0.379, P<0.05). Significant expected correlation was detected between the VSS-C and SF-36 (r>0.5, P<0.05) . The independent-samples t test results (t=6.261, P<0.01) of the CSA group and the control group showed that the VSS-C was able to distinguish healthy people from CSA patients. The paired-samples t test results (t=5.513, P<0.01) showed that VSS-C reflected the improvement of patients after treatment of Chinese massage manipulation. CONCLUSION: The Chinese version of VSS has a high comprehensibility, internal consistency and validity, and it can be a useful instrument for evaluation of patients with cervical spondylosis of vertebral artery type in China.

[Establishment of chondrocyte degeneration model in vitro by rat serum].

OBJECTIVE: To establish a model of chondrocyte degeneration in vitro. METHODS: Chondrocytes were isolated from articular cartilages of newly born SD rats by digestion with typeⅡ collagenase. The chondrocytes were cultured with H-DMEM medium containing 10%FBS, 50 ng/mL IL-1ß+10%FBS, 2.5% rat serum and 5% rat serum, respectively; and the chondrocytes at passage one were used in the experiments. The morphology changes were investigated under phase contrast microscope after chondrocytes were treated with rat serum and IL-1ß. Proliferation of chondrocytes was detected by MTT method. The protein expression levels of PCNA, typeⅡ collagen and MMP-13 were examined by Western blotting. The levels of ADAMTS5, MMP-9, Aggrecan and SOX-9 mRNA were detected by real-time PCR. RESULTS: The cell morphology was changed from polygon to spindle in both rat serum groups and IL-1ß group, and the proliferation of chondrocytes in these groups was much higher than that in control group. The results showed that the expression levels of typeⅡ collagen, Aggrecan and SOX-9 decreased while the expression levels of MMP-13, MMP-9 and ADMATS5 were up-regulated in rat serum and IL-1ß-treated groups compared with control group. CONCLUSION: The results indicate that rat serum can induce chondrocyte degeneration and may be used for osteoarthritis model in vitro.

[Effect of spinal manipulation on brain functional activity in patients with lumbar disc herniation].

OBJECTIVE: To investigate the effects of spinal manipulation (SM) on brain functional activity in patients with lumbar disc herniation (LDH). METHODS: Eleven patients with LDH were recruited in the study. All patients received 6 times of lumbar SM treatment and then clinical efficacy was evaluated. All patients received brain functional magnetic resonance imaging (fMRI) scans before and after SM treatment. RESULTS: Three subjects dropped out and 8 subjects completed the study, among whom 4 cases were effective and 4 ineffective after SM treatment. The required pressure value producing the same level (VAS 50) pain was (7.43 ± 1.47) kg and (10.53 ± 0.55) kg before and after SM treatment in effective patients(P<0.05); however, there was no significant difference in ineffective patients (P>0.05). Compared to pre-treatment level, the brain functional activity in effective patients was mainly inhibited, the inhibited areas were located in the right side of prefrontal cortex and cerebellum; while the brain functional activity was generally enhanced in ineffective patients. CONCLUSION: SM can affect the brain functional activity of patients with LDH, the inhibited areas is mainly located in prefrontal cortex and cerebellum when SM treatment is effective.

Bufalin inhibits the differentiation and proliferation of human osteosarcoma cell line hMG63-derived cancer stem cells.

Cancer stem cells (CSCs) play an important role in drug resistance of tumor and are responsible for high recurrence rates. Agents that can suppress the proliferation and differentiation of CSCs would provide new opportunity to fight against tumor recurrence. In this study, we developed a new strategy to enrich CSCs in human osteosarcoma cell line hMG63. Using these CSCs as model, we tested the effect of bufalin, a traditional Chinese medicine, on the proliferation and differentiation of CSCs. hMG63 cells were cultured in poly-HEMA-treated dish and cancer stem cell-specific medium. In this nonadhesive culture system, hMG63 formed spheres, which were then collected and injected into the immunodeficient mice. Cisplatin was administered every 3 days for five times. The enriched xenograft tumors were cultured in cancer stem cell-specific medium again to form tumor spheres. Expression of cancer stem cell markers of these cells was measured by flow cytometry. These cells were then treated with bufalin, and the proliferation and differentiation ability were indicated by the expression level of molecular markers and the formation of sphere again in vitro. We obtained a low CD133+/CD44 cell population with high-level stem cell marker. When treated with bufalin, the sphere could not get attached to the flask and failed to differentiate, which was indicated by the stable expression of stem cell marker CD133 and OCT-4 in the condition permissive to differentiation. Treatment of bufalin also suppressed the single cells isolated from the sphere to form sphere again in the nonadhesive culture system, and a decreased expression of proliferation marker Ki67 was also detected in these cells. Sphere-formed and chemoresistant colon xenograft tumors in immunodeficient mice could enrich cancer stem cell population. Bufalin could inhibit proliferation and differentiation of CSCs.

Reduction of radiation dose in the spiral CT scan of the lumbar spine by the combined use of body mass index (BMI) and automatic exposure control (AEC).

OBJECTIVE: The aim of this study was to investigate the significance of the combined use of BMI and AEC in reducing the radiation dose of CT volume scans of the lumbar spine. METHODS: A prospective study was performed to continuously collect data from 50 patients (age range from 19 to 60 years, male versus female 20/30) whose BMIs were less than 25 kg/m^{2} (group A) and 50 patients (age range from 21 to 82 years, male versus female 24/26) whose BMIs were equal to or more than 25 kg/m^{2} (group B). The 50 patients in each group were randomly divided into 5 subgroups with each subgroup having lower radiation dose from subgroup 1 to 5. All the patients were performed lumbar spiral CT scans (GE LightSpeed VCT 64-slice scanner) and the scan parameters were different in different subgroups. Volume CT dose index (CTDIvol) was recorded. The qualities of the images were graded. The one-way ANOVA and Kruskal-Wallis test were done. RESULTS: Both in group A and B, there were significant differences in CTDIvol among the 5 subgroups (P< 0.001). The quality of the images in the 5 subgroups of group A didn't show statistical difference. The standard deviation (SD) and signal to noise ratio (SNR) values of the L4-5 psoas major muscles in subgroup 5 of group B was statistical different from the other 4 subgroups (P< 0.01). CONCLUSION: Use of BMI combined with AEC reduces radiation dosage, without compromising the image quality. For patients in group A and group B, parameters of subgroup 5 and subgroup 4 may respectively be applied for lower dose CT scanning.

[Development and validation of a CO-T1 three-dimensional finite element model of a healthy person under physiologic loads].

A comprehensive, geometrically accurate, nonlinear C0-T1 three-dimensional finite element (FE) model was developed for the biomechanical study of human cervical spine and related disorders. The model was developed with anatomic detail from the computed tomography (CT) images of a 46-year-old female healthy volunteer, and applied the finite element model processing softwares such as MIMICS13.1, Hypermesh11.0, Abaqus 6.12-1, etc., for developing, preprocessing, calculating and analysing sequentially. The stress concentration region and the range of motion (ROM) of each vertebral level under axial rotation, flexion, extension, and lateral bending under physiologic static loadings were observed and recorded. The model was proven reliable, which was validated with the range of motion in previous published literatures. The model predicted the front and side parts of the foramen magnum and contralateral pedicle and facet was the stress concentration region under physiological loads of the upper spine and the lower spine, respectively. The development of this comprehensive, geometrically accurate, nonlinear cervical spine FE model could provide an ideal platform for theoretical biomechanical study of human cervical spine and related disorders.

Revealing the impact of autophagy-related genes in rheumatoid arthritis: Insights from bioinformatics.

Background: Rheumatoid arthritis is a systemic inflammatory autoimmune disease that severely impacts physical and mental health. Autophagy is a cellular process involving the degradation of cellular components in lysosomes. However, from a bioinformatics perspective, autophagy-related genes have not been comprehensively elucidated in rheumatoid arthritis. Methods: In this study, we performed differential analysis of autophagy-related genes in rheumatoid arthritis patients using the GSE93272 dataset from the Gene Expression Omnibus database. Marker genes were screened by least absolute shrinkage and selection operator. Based on marker genes, we used unsupervised cluster analysis to elaborate different autophagy clusters, and further identified modules strongly associated with rheumatoid arthritis by weighted gene co-expression network analysis. In addition, we constructed four machine learning models, random forest model, support vector machine model, generalized linear model and extreme gradient boosting based on marker genes, and based on the optimal machine learning model, a nomogram model was constructed for distinguishing between normal individuals and rheumatoid arthritis patients. Finally, five external independent rheumatoid arthritis datasets were used for the validation of our results. Results: The results showed that autophagy-related genes had significant expression differences between normal individuals and osteoarthritis patients. Through least absolute shrinkage and selection operator screening, we identified 31 marker genes and found that they exhibited significant synergistic or antagonistic effects in rheumatoid arthritis, and immune cell infiltration analysis revealed significant changes in immune cell abundance. Subsequently, we elaborated different autophagy clusters (cluster 1 and cluster 2) using unsupervised cluster analysis. Next, further by weighted gene co-expression network analysis, we identified a brown module strongly associated with rheumatoid arthritis. In addition, we constructed a nomogram model for five marker genes (CDKN2A, TP53, ATG16L2, FKBP1A, and GABARAPL1) based on a generalized linear model (area under the curve = 1.000), and the predictive efficiency and accuracy of this nomogram model were demonstrated in the calibration curves, the decision curves and the five external independent datasets were validated. Conclusion: This study identified marker autophagy-related genes in rheumatoid arthritis and analyzed their impact on the disease, providing new perspectives for understanding the role of autophagy-related genes in rheumatoid arthritis and providing new directions for its individualized treatment.

Treatment of bilateral developmental dysplasia of the hip joint with an improved technique: A case report.

BACKGROUND: Developmental dysplasia of the hip (DDH) is a common osteoarticular deformity in pediatric orthopedics. A patient with bilateral DDH was diagnosed and treated using our improved technique "(powerful overturning acetabuloplasty)" combined with femoral rotational shortening osteotomy. CASE SUMMARY: A 4-year-old girl who was diagnosed with bilateral DDH could not stand normally, and sought surgical treatment to solve the problem of double hip extension and standing. As this child had high dislocation of the hip joint and the acetabular index was high, we changed the traditional acetabuloplasty to "powerful turnover acetabuloplasty" combined with femoral rotation shortening osteotomy. During the short-term postoperative follow-up (1, 3, 6, 9, 12, and 15 months), the child had no discomfort in her lower limbs. After the braces and internal fixation plates were removed, formal rehabilitation training was actively carried out. CONCLUSION: Our "powerful overturning acetabuloplasty" combined with femoral rotational shortening osteotomy is feasible in the treatment of DDH in children. This technology may be widely used in the clinic.