Spatiotemporal imaging of charge transfer in photocatalyst particles.

The water-splitting reaction using photocatalyst particles is a promising route for solar fuel production1-4. Photo-induced charge transfer from a photocatalyst to catalytic surface sites is key in ensuring photocatalytic efficiency5; however, it is challenging to understand this process, which spans a wide spatiotemporal range from nanometres to micrometres and from femtoseconds to seconds6-8. Although the steady-state charge distribution on single photocatalyst particles has been mapped by microscopic techniques9-11, and the charge transfer dynamics in photocatalyst aggregations have been revealed by time-resolved spectroscopy12,13, spatiotemporally evolving charge transfer processes in single photocatalyst particles cannot be tracked, and their exact mechanism is unknown. Here we perform spatiotemporally resolved surface photovoltage measurements on cuprous oxide photocatalyst particles to map holistic charge transfer processes on the femtosecond to second timescale at the single-particle level. We find that photogenerated electrons are transferred to the catalytic surface quasi-ballistically through inter-facet hot electron transfer on a subpicosecond timescale, whereas photogenerated holes are transferred to a spatially separated surface and stabilized through selective trapping on a microsecond timescale. We demonstrate that these ultrafast-hot-electron-transfer and anisotropic-trapping regimes, which challenge the classical perception of a drift-diffusion model, contribute to the efficient charge separation in photocatalysis and improve photocatalytic performance. We anticipate that our findings will be used to illustrate the universality of other photoelectronic devices and facilitate the rational design of photocatalysts.

Ultrathin Lithiophilic 3D Arrayed Skeleton Enabling Spatial-Selection Deposition for Dendrite-Free Lithium Anodes.

Lithium metal batteries are promising to become a new generation of energy storage batteries. However, the growth of Li dendrites and the volume expansion of the anode are serious constraints to their commercial implementation. Herein, a controllable strategy is proposed to construct an ultrathin 3D hierarchical host of honeycomb copper micromesh loaded with lithiophilic copper oxide nanowires (CMMC). The uniquely designed 3D hierarchical arrayed skeletons demonstrate a surface-preferred and spatial-selective effect to homogenize local current density and relieve the volume expansion, effectively suppressing the dendrite growth. Employing the constructed CMMC current collector in a half-cell, >400 cycles with 99% coulombic efficiency at 0.5 mA cm-2 is performed. The symmetric battery cycles stably for >2000 h, and the full battery delivers a capacity of 166.6 mAh g-1 . This facile and controllable approach provides an effective strategy for constructing high-performance lithium metal batteries.

Diagnostic performance of transient elastography in differentiation between porto-sinusoidal vascular liver disease and compensated cirrhosis.

BACKGROUND AND AIMS: The efficacy of transient elastography (TE) in the differential diagnosis between porto-sinusoidal vascular disease (PSVD) and compensated cirrhosis has not been sufficiently studied. We aimed to investigate the diagnostic performance of TE and identify histological lesions associated with liver stiffness. METHODS: We conducted a retrospective cohort study including patients with PSVD and cirrhosis (Child-Turcotte-Pugh class A) and healthy subjects. Both the PSVD and cirrhotic patients had at least one sign of PH. The area under the receiver operating characteristic curve (AUROC) was used for differentiation. RESULTS: Ninety-two patients with PSVD (median age: 53 years, 33% male), 100 patients with compensated cirrhosis and 101 healthy subjects were included. The median TE-LSM in the PSVD patients (10.0 [7.0-13.0] kPa) was significantly lower than that in the cirrhotic patients (21.0 [15.0-28.0] kPa, p < .001) but was significantly higher than that in the healthy subjects (5.1 [4.6-6.0] kPa, p < .001). The AUROCs of TE-LSM for the discrimination of PSVD from the cirrhosis and healthy subjects were 0.886 (95% CI: 0.833-0.928) and 0.913 (95% CI: 0.864-0.949), respectively. The sensitivity and specificity to discriminate PSVD from compensated cirrhosis were 78.3% and 82.0%, respectively, at a cut-off of 13.6 kPa. Furthermore, portal fibrosis and aberrant cytokeratin 7 expression of centrilobular hepatocytes were significantly associated with higher TE-LSM (≥10.0 kPa). CONCLUSION: TE-LSM can be used to differentiate PSVD from compensated cirrhosis. Pathological features in association with increased liver stiffness are identified.

HIF-1α increases the osteogenic capacity of ADSCs by coupling angiogenesis and osteogenesis via the HIF-1α/VEGF/AKT/mTOR signaling pathway.

BACKGROUND: Stabilization and increased activity of hypoxia-inducible factor 1-α (HIF-1α) can directly increase cancellous bone formation and play an essential role in bone modeling and remodeling. However, whether an increased HIF-1α expression in adipose-derived stem cells (ADSCs) increases osteogenic capacity and promotes bone regeneration is not known. RESULTS: In this study, ADSCs transfected with small interfering RNA and HIF-1α overexpression plasmid were established to investigate the proliferation, migration, adhesion, and osteogenic capacity of ADSCs and the angiogenic ability of human umbilical vein endothelial cells (HUVECs). Overexpression of HIF-1α could promote the biological functions of ADSCs, and the angiogenic ability of HUVECs. Western blotting showed that the protein levels of osteogenesis-related factors were increased when HIF-1α was overexpressed. Furthermore, the influence of upregulation of HIF-1α in ADSC sheets on osseointegration was evaluated using a Sprague-Dawley (SD) rats implant model, in which the bone mass and osteoid mineralization speed were evaluated by radiological and histological analysis. The overexpression of HIF-1α in ADSCs enhanced bone remodeling and osseointegration around titanium implants. However, transfecting the small interfering RNA (siRNA) of HIF-1α in ADSCs attenuated their osteogenic and angiogenic capacity. Finally, it was confirmed in vitro that HIF-1α promotes osteogenic differentiation and the biological functions in ADSCs via the VEGF/AKT/mTOR pathway. CONCLUSIONS: This study demonstrates that HIF-1α has a critical ability to promote osteogenic differentiation in ADSCs by coupling osteogenesis and angiogenesis via the VEGF/AKT/mTOR signaling pathway, which in turn increases osteointegration and bone formation around titanium implants.

Freestanding 3D Metallic Micromesh for High-Performance Flexible Transparent Solid-State Zinc Batteries.

Flexible transparent energy supplies are extremely essential to the fast-growing flexible electronic systems. However, the general developed flexible transparent energy storage devices are severely limited by the challenges of low energy density, safety issues, and/or poor compatibility. In this work, a freestanding 3D hierarchical metallic micromesh with remarkble optoelectronic properties (T = 89.59% and Rs = 0.23 Ω sq-1 ) and super-flexibility is designed and manufactured for flexible transparent alkaline zinc batteries. The 3D Ni micromesh supported Cu(OH)2 @NiCo bimetallic hydroxide flexible transparent electrode (3D NM@Cu(OH)2 @NiCo BH) is obtained by a combination of photolithography, chemical etching, and electrodeposition. The negative electrode is constructed by electrodeposition of electrochemically active zinc on the surface of Ni@Cu micromesh (Ni@Cu@Zn MM). The metallic micromesh with 3D hierarchical nanoarchitecture can not only ensure low sheet resistance, but also realize high mass loading of active materials and short electron/ion transmission path, which can guarantee high energy density and high-rate capability of the transparent devices. The flexible transparent 3D NM@Cu(OH)2 @NiCo BH electrode realizes a specific capacity of 66.03 µAh cm-2 at 1 mA cm-2 with a transmittance of 63%. Furthermore, the assembled solid-state NiCo-Zn alkaline battery exhibits a desirable energy density/power density of 35.89 µWh cm-2 /2000.26 µW cm-2 with a transmittance of 54.34%.

Ti3C2(OH)x-assisted LDI-TOF-MS for the rapid analysis of natural small molecules.

The inhomogeneous distribution of co-crystallized analytes and the traditional organic matrices as well as the intensive background interference in the low molecular weight range hinder the application of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) in the analysis of small-molecular compounds. New two-dimensional material MXene (e.g., Ti3C2) exerts better hydrophilicity, homogeneity and repeatability, and higher laser desorption efficiency, as well as less background interference than traditional organic matrices and other nanomaterial matrices such as titanium oxide, graphene, and gold nanostructures. This study was aimed to design Ti3C2 matrix with abundant hydroxyls on its surface, enhance the stability of this hydroxyl-rich Ti3C2 (Ti3C2(OH)x), and evaluate the analytical performances of Ti3C2(OH)x-assisted laser desorption/ionization time-of-flight mass spectrometry (LDI-TOF-MS) for small-molecular natural compounds in complex samples. The developed Ti3C2(OH)x showed the distinct advantages such as minimum background interference, high peak intensity (~105), high salt (0.6 M) and protein (0.5 mg/mL) tolerance, good repeatability (relative standard deviation<20%), and good stability after eight months of storage. Ti3C2(OH)x-assisted LDI-TOF-MS analysis could be used to rapidly identify Artemisia annua (a world-famous traditional Chinese medicine) and quantify the contents of the main chemical ingredients (oxymatrine (OXY) and matrine) of Compound Kushen Injection (CKI). Interestingly, the content of OXY in CKI could be accurately quantified by Ti3C2(OH)x-assisted LDI-TOF-MS, and there was a good linear relationship (R2 -0.9929), a low limit of detection (400 pg), and a low limit of quantification (600 pg) of OXY. Taken together, the rapid and accurate analysis of small-molecular natural compounds in complicated samples could be achieved by the Ti3C2(OH)x-assisted LDI-TOF-MS analysis.

Development of a droplet digital PCR assay to detect bovine alphaherpesvirus 1 in bovine semen.

BACKGROUND: Infectious bovine rhinotracheitis (IBR) caused by bovine alphaherpesvirus 1 (BoHV-1) is one of the most important contagious diseases in bovine. This is one of the most common infectious disease of cattle. This has led to high economic losses in the cattle farming industry. BoHV-1 can potentially be transmitted via semen during natural or artificial insemination (AI). Therefore, testing methods for the early diagnosis of BoHV-1 infection are urgently needed for international trade of ruminant semen. In this study, we developed a novel droplet digital PCR (ddPCR) assay for the detection of BoHV-1 DNA in semen samples. RESULTS: The ddPCR results showed that the detection limit was 4.45 copies per reaction with high reproducibility. The established method was highly specific for BoHV-1 and did not show cross-reactivity with specify the organisms (BTV, BVDV, Brucella, M . bovis). The results of clinical sample testing showed that the positivity rate of ddPCR (87.8%) was higher than that of qPCR (84.1%). CONCLUSIONS: The ddPCR assay showed good accuracy for mixed samples and could be a new added diagnostic tool for detecting BoHV-1.

Dielectric Properties Investigation of Metal-Insulator-Metal (MIM) Capacitors.

This study presents the construction and dielectric properties investigation of atomic-layer-deposition Al2O3/TiO2/HfO2 dielectric-film-based metal-insulator-metal (MIM) capacitors. The influence of the dielectric layer material and thickness on the performance of MIM capacitors are also systematically investigated. The morphology and surface roughness of dielectric films for different materials and thicknesses are analyzed via atomic force microscopy (AFM). Among them, the 25 nm Al2O3-based dielectric capacitor exhibits superior comprehensive electrical performance, including a high capacitance density of 7.89 fF·µm-2, desirable breakdown voltage and leakage current of about 12 V and 1.4 × 10-10 A·cm-2, and quadratic voltage coefficient of 303.6 ppm·V-2. Simultaneously, the fabricated capacitor indicates desirable stability in terms of frequency and bias voltage (at 1 MHz), with the corresponding slight capacitance density variation of about 0.52 fF·µm-2 and 0.25 fF·µm-2. Furthermore, the mechanism of the variation in capacitance density and leakage current might be attributed to the Poole-Frenkel emission and charge-trapping effect of the high-k materials. All these results indicate potential applications in integrated passive devices.

Enhanced Electrochemical Water Oxidation Activity by Structural Engineered Prussian Blue Analogue/rGO Heterostructure.

Prussian blue analogue (PBA), with a three-dimensional open skeleton and abundant unsaturated surface coordination atoms, attracts extensive research interest in electrochemical energy-related fields due to facile preparation, low cost, and adjustable components. However, it remains a challenge to directly employ PBA as an electrocatalyst for water splitting owing to their poor charge transport ability and electrochemical stability. Herein, the PBA/rGO heterostructure is constructed based on structural engineering. Graphene not only improves the charge transfer efficiency of the compound material but also provides confined growth sites for PBA. Furthermore, the charge transfer interaction between the heterostructure interfaces facilitates the electrocatalytic oxygen evolution reaction of the composite, which is confirmed by the results of the electrochemical measurements. The overpotential of the PBA/rGO material is only 331.5 mV at a current density of 30 mA cm-2 in 1.0 M KOH electrolyte with a small Tafel slope of 57.9 mV dec-1, and the compound material exhibits high durability lasting for 40 h.

[Spatial distribution characteristics of metabolities in rhizome of Paris polyphylla var. yunnanensis: based on MALDI-MSI].

In this study, a method was established for in-situ visualization of metabolite distribution in the rhizome of Paris polyphylla var. yunnanensis. To be specific, through matrix-assisted laser desorption/ionization-mass spectrometry imaging(MALDI-MSI), the spatial locations of steroidal saponins, amino acids, organic acids, phytosterols, phytoecdysones, nucleosides, and esters in rhizome of the medicinal plant were directly analyzed, and six unknown compounds with differential distribution in rhizome tissues were identified. The specific procedure is as follows: preparation of rhizome tissue section, matrix screening and optimization, and MALDI-MSI analysis. The results showed that the steroidal saponins were mainly distributed in the central, amino acids in epidermis and cortex, low-molecular-weight organic acids in central epidermis, phytosterols in the epidermis and lateral cortex, the phytoecdysones in epidermis and cortex, nucleosides(uneven distribution) in epidermis and cortex, growth hormones around the epidermis and cortex, particularly outside the cortex, and esters in cortex with unobvious difference among different tissues. In this study, the spatial distribution of meta-bolites in the rhizome of P. polyphylla var. yunnanensis was characterized for the first time. The result can serve as a reference for identifying and extracting endogenous metabolites of P. polyphylla var. yunnanensis, exploring the synthesis and metabolism mechanisms of the metabolites, and evaluating the quality of medicinal materials.

Operando Identification of the Dynamic Behavior of Oxygen Vacancy-Rich Co3O4 for Oxygen Evolution Reaction.

The exact role of a defect structure on transition metal compounds for electrocatalytic oxygen evolution reaction (OER), which is a very dynamic process, remains unclear. Studying the structure-activity relationship of defective electrocatalysts under operando conditions is crucial for understanding their intrinsic reaction mechanism and dynamic behavior of defect sites. Co3O4 with rich oxygen vacancy (VO) has been reported to efficiently catalyze OER. Herein, we constructed pure spinel Co3O4 and VO-rich Co3O4 as catalyst models to study the defect mechanism and investigate the dynamic behavior of defect sites during the electrocatalytic OER process by various operando characterizations. Operando electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) implied that the VO could facilitate the pre-oxidation of the low-valence Co (Co2+, part of which was induced by the VO to balance the charge) at a relatively lower applied potential. This observation confirmed that the VO could initialize the surface reconstruction of VO-Co3O4 prior to the occurrence of the OER process. The quasi-operando X-ray photoelectron spectroscopy (XPS) and operando X-ray absorption fine structure (XAFS) results further demonstrated the oxygen vacancies were filled with OH• first for VO-Co3O4 and facilitated pre-oxidation of low-valence Co and promoted reconstruction/deprotonation of intermediate Co-OOH•. This work provides insight into the defect mechanism in Co3O4 for OER in a dynamic way by observing the surface dynamic evolution process of defective electrocatalysts and identifying the real active sites during the electrocatalysis process. The current finding would motivate the community to focus more on the dynamic behavior of defect electrocatalysts.

Quantitative insights into non-uniform plasmonic hotspots due to symmetry breaking induced by oblique incidence.

Localized surface plasmon resonance draws great attentions mainly due to its enhanced near electric field, i.e., plasmonic hotspots. The symmetry breaking via oblique incidence of light is predicted to influence the intensity of plasmonic hotspots. However, relevant experimental investigation in quantitative comparison with theory is still lacking. Here, we visualize the polarization-dependent plasmonic hotspots of a triangular Ag nanoplate through oblique-incidence photoemission electron microscopy (PEEM), revealing a non-uniform near-field enhancement. Under oblique incidence, two bright spots and one dark spot were identified in the polarization-averaged PEEM image, different from that for normal illumination where bright spots with equal intensity are anticipated. In polarization-dependent PEEM images, plasmonic hotspots appeared at specific corners of a triangular Ag nanoplate, and rotated in a manner consistent with the rotation of polarization angle. The experimental intensity maps of the photoelectron were well reproduced by simulation on a quantitative level. This work provides a quantitative understanding of how the orientation of incidence light relative to a plasmonic antenna influences the near-field enhancement.

Assessment of ctDNA in CSF may be a more rapid means of assessing surgical outcomes than plasma ctDNA in glioblastoma.

We aimed to develop a high-throughput deep DNA sequencing assay of cerebrospinal fluid (CSF) to identify clinically relevant oncogenic mutations that contribute to the development of glioblastoma (GBM) and serve as biomarkers to predict patients' responses to surgery. For this purpose, we recruited five patients diagnosed with highly suspicious GBM according to preoperative magnet resonance imaging. Subsequently, patients were histologically diagnosed with GBM. CSF was obtained through routine lumbar puncture, and plasma from peripheral blood was collected before surgery and 7 days after. Fresh tumor samples were collected using routine surgical procedures. Targeted deep sequencing was used to characterize the genomic landscape and identify mutational profile that differed between pre-surgical and post-surgical samples. Sequence analysis was designed to detect protein-coding exons, exon-intron boundaries, and the untranslated regions of 50 genes associated with cancers of the central nervous system. Circulating tumor DNAs (ctDNAs) were prepared from the CSF and plasma from peripheral blood. For comparison, DNA was isolated from fresh tumor tissues. Non-silent coding variants were detected in CSF and plasma ctDNAs, and the overall minor allele frequency (MAF) of the former corresponded to an earlier disease stage compared with that of plasma when the tumor burden was released (surgical removal). Gene mutation loads of GBMs significantly correlated with overall survival (OS, days) (Pearson correlation = -0.95, P = 0.01). We conclude that CSF ctDNAs better reflected the sequential mutational changes of driver genes compared with those of plasma ctDNAs. Deep sequencing of the CSF of patients with GBM may therefore serve as an alternative clinical assay to improve patients' outcomes.

Observation and Manipulation of Visible Edge Plasmons in Bi2Te3 Nanoplates.

Noble metals, like Ag and Au, are the most intensively studied plasmonic materials in the visible range. Plasmons in semiconductors, however, are usually believed to be in the infrared wavelength region due to the intrinsic low carrier concentrations. Herein, we observe the edge plasmon modes of Bi2Te3, a narrow-band gap semiconductor, in the visible spectral range using photoemission electron microscopy (PEEM). The Bi2Te3 nanoplates excited by 400 nm femtosecond laser pulses exhibit strong photoemission intensities along the edges, which follow a cos4 dependence on the polarization state of incident beam. Because of the phase retardation effect, plasmonic response along different edges can be selectively exited. The thickness-dependent photoemission intensities exclude the spin-orbit induced surface states as the origin of these plasmonic modes. Instead, we propose that the interband transition-induced nonequilibrium carriers might play a key role. Our results not only experimentally demonstrate the possibility of visible plasmons in semiconducting materials but also open up a new avenue for exploring the optical properties of topological insulator materials using PEEM.

Three dimensional carbon-bubble foams with hierarchical pores for ultra-long cycling life supercapacitors.

Design and synthesis of integrated, interconnected porous structures are critical to the development of high-performance supercapacitors. We develop a novel and facile synthesis technic to construct three-dimensional carbon-bubble foams with hierarchical pores geometry. The carbon-bubble foams are fabricated by conformally coating, via catalytic decomposition of ethanol, a layer of carbon coating onto the surfaces of pre-formed ZnO foams and then the removal of the ZnO template by a reduction-evaporation process. Both the wall thickness and the pore size can be well tuned by adjusting the catalytic decomposition time and temperature. The as-synthesized carbon-bubble foams electrode retains 90.3% of the initial capacitance even after 70 000 continuous cycles under a high current density of 20 A g-1, demonstrating excellent long-time electrochemical and cycling stability. The symmetric device displays rate capability retention of 81.8% with the current density increasing from 0.4 to 20 A g-1. These achieved electrochemical performances originate from the unique structural design of the carbon-bubble foams, which provide not only abundant transport channels for electron and ion but also high active surface area accessible by the electrolyte ions.

Detection of Hepatitis B Virus M204I Mutation by Quantum Dot-Labeled DNA Probe.

Quantum dots (QDs) are semiconductor nanoparticles with a diameter of less than 10 nm, which have been widely used as fluorescent probes in biochemical analysis and vivo imaging because of their excellent optical properties. Sensitive and convenient detection of hepatitis B virus (HBV) gene mutations is important in clinical diagnosis. Therefore, we developed a sensitive, low-cost and convenient QDs-mediated fluorescent method for the detection of HBV gene mutations in real serum samples from chronic hepatitis B (CHB) patients who had received lamivudine or telbivudine antiviral therapy. We also evaluated the efficiency of this method for the detection of drug-resistant mutations compared with direct sequencing. In CHB, HBV DNA from the serum samples of patients with poor response or virological breakthrough can be hybridized to probes containing the M204I mutation to visualize fluorescence under fluorescence microscopy, where fluorescence intensity is related to the virus load, in our method. At present, the limits of the method used to detect HBV genetic variations by fluorescence quantum dots is 10³ IU/mL. These results show that QDs can be used as fluorescent probes to detect viral HBV DNA polymerase gene variation, and is a simple readout system without complex and expensive instruments, which provides an attractive platform for the detection of HBV M204I mutation.

Copper-Vapor-Assisted Rapid Synthesis of Large AB-Stacked Bilayer Graphene Domains on Cu-Ni Alloy.

The synergic effects of Cu85Ni15 and the copper vapor evaporated from copper foil enabled the fast growth of a ≈300 µm bilayer graphene in ≈10 minutes. The copper vapor reduces the growth rate of the first graphene layer while the carbon dissolved in the alloy boosts the growth of the subsequently developed second graphene layer with an AB-stacking order.

Tumor suppressor miR-1 restrains epithelial-mesenchymal transition and metastasis of colorectal carcinoma via the MAPK and PI3K/AKT pathway.

Aberrant expression of miR-1 has been implicated in various cancers. However, the mechanisms underlying the role of miR-1 in CRC progression still have not been clarified clearly. Here, we showed the decreased expression of miR-1 in colorectal carcinoma (CRC) tissues and cell lines. Ectopic introduction of miR-1 suppressed cell proliferation and migration, whereas miR-1 inhibitor performed contrary functions in CRC cells. Stable overexpression of miR-1 was sufficient to inhibit tumor growth and homing capacity in vivo. Proteomic analysis revealed that miR-1 modulated the expression of key cellular molecules and involved in the MAPK and PI3K/AKT pathways by inhibiting phosphorylation of ERK and AKT. Meanwhile, miR-1 also reversed epithelial-mesenchymal transition (EMT), which played a pivotal role in the initiation of metastasis. Further studies found that miR-1 can target the 3' untranslated region (3'UTR) of LIM and SH3 protein 1 (LASP1) mRNA and suppress the expression of LASP1, identified as a CRC-associated protein. In contrast to the phenotypes induced by miR-1 restoration, LASP1-induced cell proliferation and migration partly rescued miR-1-mediated biological behaviors. Our results illustrated that miR-1 play a critical role in CRC progression, which suggests its potential role in the molecular therapy of cancer.

Role of LRP5/6/GSK-3ß/ß-catenin in the differences in exenatide- and insulin-promoted T2D osteogenesis and osteomodulation.

BACKGROUND AND PURPOSE: Insulin and exenatide are two hypoglycaemic agents that exhibit different osteogenic effects. This study compared the differences between exenatide and insulin in osseointegration in a rat model of Type 2 diabetes (T2D) and explored the mechanisms promoting osteogenesis in this model of T2D. EXPERIMENTAL APPROACH: In vivo, micro-CT was used to detect differences in the peri-implant bone microstructure in vivo. Histology, dual-fluorescent labelling, immunofluorescence and immunohistochemistry were used to detect differences in tissue, cell and protein expression around the implants. In vitro, RT-PCR and western blotting were used to measure the expression of osteogenesis- and Wnt signalling-related genes and proteins in bone marrow mesenchymal stromal cells (BMSCs) from rats with T2D (TBMSCs) after PBS, insulin and exenatide treatment. RT-PCR was used to detect the expression of Wnt bypass cascade reactions under Wnt inactivation. KEY RESULTS: Micro-CT and section staining showed exenatide extensively promoted peri-implant osseointegration. Both in vivo and in vitro experiments showed exenatide substantially increased the expression of osteogenesis-related and activated the LRP5/6/GSK-3ß/ß-catenin-related Wnt pathway. Furthermore, exenatide suppressed expression of Bmpr1a to inhibit lipogenesis and promoted expression of Btrc to suppress inflammation. CONCLUSION AND IMPLICATIONS: Compared to insulin, exenatide significantly improved osteogenesis in T2D rats and TBMSCs. In addition to its dependence on LRP5/6/GSK-3ß/ß-catenin signalling for osteogenic differentiation, exenatide-mediated osteomodulation also involves inhibition of inflammation and adipogenesis by BMPR1A and ß-TrCP, respectively.

Inhibition of PTEN promotes osteointegration of titanium implants in type 2 diabetes by enhancing anti-inflammation and osteogenic capacity of adipose-derived stem cells.

Background: The low osteogenic differentiation potential and attenuated anti-inflammatory effect of adipose-derived stem cells (ADSCs) from animals with type 2 diabetes mellitus (T2DM) limits osseointegration of the implant. However, the underlying mechanisms are not fully understood. Methods: Western blotting and qRT-PCR analyses were performed to investigate the effects of PTEN on the osteogenic capacity of ADSCs of T2DM rats (TADSCs). We conducted animal experiments in T2DM-Sprague Dawley (SD) rats to evaluate the osteogenic capacity of modified TADSC sheets in vivo. New bone formation was assessed by micro-CT and histological analyses. Results: In this study, adipose-derived stem cells of T2DM rats exhibited an impaired osteogenic capacity. RNA-seq analysis showed that PTEN mRNA expression was upregulated in TADSCs, which attenuated the osteogenic capacity of TADSCs by inhibiting the AKT/mTOR/HIF-1α signaling pathway. miR-140-3p, which inhibits PTEN, was suppressed in TADSCs. Overexpression or inhibition of PTEN could correspondingly reduce or enhance the osteogenic ability of TADSCs by regulating the AKT/mTOR/HIF-1α signaling pathway. TADSCs transfected with PTEN siRNA resulted in higher and lower expressions of genes encoded in M2 macrophages (Arg1) and M1 macrophages (iNOS), respectively. In the T2DM rat model, PTEN inhibition in TADSC sheets promoted macrophage polarization toward the M2 phenotype, attenuated inflammation, and enhanced osseointegration around implants. Conclusion: Upregulation of PTEN, which was partially due to the inhibition of miR-140-3p, is important for the attenuated osteogenesis by TADSCs owing to the inhibition of the AKT/mTOR/HIF-1α signaling pathway. Inhibition of PTEN significantly improves the anti-inflammatory effect and osteogenic capacity of TADSCs, thus promoting peri-implant bone formation in T2DM rats. Our findings offer a potential therapeutic approach for modifying stem cells derived from patients with T2DM to enhance osseointegration.