Machine Learning Assisted Self-Powered Identity Recognition Based on Thermogalvanic Hydrogel for Intelligent Security.

Identity recognition as the first barrier of intelligent security plays a vital role, which is facing new challenges that are unable to meet the need of intelligent era due to low accuracy, complex configuration and dependence on power supply. Here, a finger temperature-driven intelligent identity recognition strategy is presented based on a thermogalvanic hydrogel (TGH) by actively discerning biometric characteristics of fingers. The TGH is a dual network PVA/Agar hydrogel in an H2O/glycerol binary solvent with [Fe(CN)6]3-/4- as a redox couple. Using a concave-arranged TGH array, the characteristics of users can be distinguished adequately even under an open environment by extracting self-existent intrinsic temperature features from five typical sites of fingers. Combined with machine learning, the TGH array can recognize different users with a high average accuracy of 97.6%. This self-powered identity recognition strategy is further applied to a smart lock, attaining a more reliable security protection from biometric characteristics than bare passwords. This work provides a promising solution for achieving better identity recognition, which has great advantages in intelligent security and human-machine interaction toward future Internet of everything.

A multicrosslinked network composite hydrogel scaffold based on DLP photocuring printing for nasal cartilage repair.

Natural hydrogels are widely employed in tissue engineering and have excellent biodegradability and biocompatibility. Unfortunately, the utilization of such hydrogels in the field of three-dimensional (3D) printing nasal cartilage is constrained by their subpar mechanical characteristics. In this study, we provide a multicrosslinked network hybrid ink made of photocurable gelatin, hyaluronic acid, and acrylamide (AM). The ink may be processed into intricate 3D hydrogel structures with good biocompatibility and high stiffness properties using 3D printing technology based on digital light processing (DLP), including intricate shapes resembling noses. By varying the AM content, the mechanical behavior and biocompatibility of the hydrogels can be adjusted. In comparison to the gelatin methacryloyl (GelMA)/hyaluronic acid methacryloyl (HAMA) hydrogel, adding AM considerably enhances the hydrogel's mechanical properties while also enhancing printing quality. Meanwhile, the biocompatibility of the multicrosslinked network hydrogels and the development of cartilage were assessed using neonatal Sprague-Dawley (SD) rat chondrocytes (CChons). Cells sown on the hydrogels considerably multiplied after 7 days of culture and kept up the expression of particular proteins. Together, our findings point to GelMA/HAMA/polyacrylamide (PAM) hydrogel as a potential material for nasal cartilage restoration. The photocuring multicrosslinked network ink composed of appropriate proportions of GelMA/HAMA/PAM is very suitable for DLP 3D printing and will play an important role in the construction of nasal cartilage, ear cartilage, articular cartilage, and other tissues and organs in the future. Notably, previous studies have not explored the application of 3D-printed GelMA/HAMA/PAM hydrogels for nasal cartilage regeneration.

3D Bioprinting-Based Dopamine-Coupled Flexible Material for Nasal Cartilage Repair.

INTRODUCTION: Since 3D printing can be used to design implants according to the specific conditions of patients, it has become an emerging technology in tissue engineering and regenerative medicine. How to improve the mechanical, elastic and adhesion properties of 3D-printed photocrosslinked hydrogels is the focus of cartilage tissue repair and reconstruction research. MATERIALS AND METHODS: We established a strategy for toughening hydrogels by mixing GelMA-DOPA (GD), which is prepared by coupling dopamine (DA) with GelMA, with HAMA, bacterial cellulose (BC) to produce composite hydrogels (HB-GD). HB-GD hydrogel scaffolds were characterized in vitro by scanning electron microscopy (SEM), Young's modulus, swelling property and rheological property tests. And biocompatibility and chondrogenic ability were tested by live/dead staining, DNA quantitative analysis and immunofluorescence staining. Combined with 3D bioprinting technology, mouse chondrocytes (ADTC5) were added to form a biological chain to construct an in vitro model, and the feasibility of the model for nasal cartilage regeneration was verified by cytology evaluation. RESULTS: With the increase of GD concentration, the toughness of the composite hydrogel increased (47.0 ± 2.7 kPa (HB-5GD)-158 ± 3.2 kPa (HB-20GD)), and it had excellent swelling properties, rheological properties and printing properties. The HB-GD composite hydrogel promoted the proliferation and differentiation of ATDC5. Cells in 3D printed scaffolds had higher survival rates (> 95%) and better protein expression than the encapsulated cultures. CONCLUSION: The HB-10GD hydrogel can be made into a porous scaffold with precise shape, good internal pore structure, high mechanical strength and good swelling rate through extrusion 3D printing. NO LEVEL ASSIGNED: This journal requires that authors assign a level of evidence to each submission to which Evidence-Based Medicine rankings are applicable. This excludes Review Articles, Book Reviews, and manuscripts that concern Basic Science, Animal Studies, Cadaver Studies, and Experimental Studies. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266.

Hybrid energy cell for degradation of methyl orange by self-powered electrocatalytic oxidation.

In general, methyl orange (MO) can be degraded by an electrocatalytic oxidation process driven by a power source due to the generation of superoxidative hydroxyl radical on the anode. Here, we report a hybrid energy cell that is used for a self-powered electrocatalytic process for the degradation of MO without using an external power source. The hybrid energy cell can simultaneously or individually harvest mechanical and thermal energies. The mechanical energy was harvested by the triboelectric nanogenerator (TENG) fabricated at the top by using a flexible polydimethysiloxane (PDMS) nanowire array with diameters of about 200 nm. A pyroelectric nanogenerator (PENG) was fabricated below the TENG to harvest thermal energy. The power output of the device can be directly used for electrodegradation of MO, demonstrating a self-powered electrocatalytic oxidation process.

Thermoelectric Hydrogel Electronic Skin for Passive Multimodal Physiological Perception.

Electronic skins (e-skins) are being extensively researched for their ability to recognize physiological data and deliver feedback via electrical signals. However, their wide range of applications is frequently restricted by the indispensableness of external power supplies and single sensory function. Here, we report a passive multimodal e-skin for real-time human health assessment based on a thermoelectric hydrogel. The hydrogel network consists of poly(vinyl alcohol)/low acyl gellan gum with [Fe(CN)6]4-/3- as the redox couple. The introduction of glycerol and Li+ furnishes the gel-based e-skin with antidrying and antifreezing properties, a thermopower of 2.04 mV K-1, fast self-healing in less than 10 min, and high conductivity of 2.56 S m-1. As a prospective application, the e-skin can actively perceive multimodal physiological signals without the need for decoupling, including body temperature, pulse rate, and sweat content, in real time by synergistically coupling sensing and transduction. This work offers a scientific basis and designs an approach to develop passive multimodal e-skins and promotes the application of wearable electronics in advanced intelligent medicine.

Thermogalvanic hydrogel-based e-skin for self-powered on-body dual-modal temperature and strain sensing.

Sensing of both temperature and strain is crucial for various diagnostic and therapeutic purposes. Here, we present a novel hydrogel-based electronic skin (e-skin) capable of dual-mode sensing of temperature and strain. The thermocouple ion selected for this study is the iodine/triiodide (I-/I3-) redox couple, which is a common component in everyday disinfectants. By leveraging the thermoelectric conversion in conjunction with the inherent piezoresistive effect of a gel electrolyte, self-powered sensing is achieved by utilizing the temperature difference between the human body and the external environment. The composite hydrogels synthesized from polyvinyl alcohol (PVA) monomers using a simple freeze‒thaw method exhibit remarkable flexibility, extensibility, and adaptability to human tissue. The incorporation of zwitterions further augments the resistance of the hydrogel to dehydration and low temperatures, allowing maintenance of more than 90% of its weight after 48 h in the air. Given its robust thermal current response, the hydrogel was encapsulated and then integrated onto various areas of the human body, including the cheeks, fingers, and elbows. Furthermore, the detection of the head-down state and the monitoring of foot movements demonstrate the promising application of the hydrogel in supervising the neck posture of sedentary office workers and the activity status. The successful demonstration of self-powered on-body temperature and strain sensing opens up new possibilities for wearable intelligent electronics and robotics.

Enhanced photodegradation of methyl orange with TiO2 nanoparticles using a triboelectric nanogenerator.

Methyl orange (MO) can be degraded by a photocatalytic process using TiO2 under UV irradiation. The photo-generated holes and electrons can migrate to the surface of TiO2 particles and serve as redox sources that react with adsorbed reactants, leading to the formation of superoxide radical anions, hydrogen peroxide and hydroxyl radicals involved in the oxidation of dye pollution. Here, we fabricated a polytetrafluoroethylene-Al based triboelectric nanogenerator (TENG) whose electric power output can be used for enhancing the photodegradation of MO with the presence of TiO2 nanoparticles, because the TENG generated electric field can effectively boost the separation and restrain the recombination of photo-generated electrons and holes. Due to the photoelectrical coupling, the degradation percentages of MO for 120 min with and without TENG assistance are 76% and 27%, respectively. The fabricated TENGs have potential applications in wastewater treatment, water splitting, and pollution degradation.

Effective Orthodontic Tooth Movement via an Occlusion-Activated Electromechanical Synergistic Dental Aligner.

Malocclusion is a prevalent dental health problem plaguing over 56% worldwide. Mechanical orthodontic aligners render directional teeth movement extensively used for malocclusion treatment in the clinic, while mechanical regulation inefficiency prolongs the treatment course and induces adverse complications. As a noninvasive physiotherapy, an appropriate electric field plays a vital role in tissue metabolism engineering. Here, we propose an occlusion-activated electromechanical synergistic dental aligner that converts occlusal energy into a piezo-excited alternating electric field for accelerating orthodontic tooth movement. Within an 18-day intervention, significantly facilitated orthodontic results were obtained from young and aged Sprague-Dawley rats, increasing by 34% and 164% in orthodontic efficiency, respectively. The different efficiencies were attributed to age-distributed periodontal tissue status. Mechanistically, the electromechanical synergistic intervention modulated the microenvironment, enhanced osteoblast and osteoclast activity, promoted alveolar bone metabolism, and ultimately accelerated tooth movement. This work holds excellent potential for personalized and effective treatment for malocclusions, which would vastly reduce the suffering of the long orthodontic course.

Triboelectric Nanogenerators for Harvesting Diverse Water Kinetic Energy.

The water covering the Earth's surface not only supports life but also contains a tremendous amount of energy. Water energy is the most important and widely used renewable energy source in the environment, and the ability to extract the mechanical energy of water is of particular interest since moving water is ubiquitous and abundant, from flowing rivers to falling rain drops. In recent years, triboelectric nanogenerators (TENGs) have been promising for applications in harvesting kinetic energy from water due to their merits of low cost, light weight, simple structure, and abundant choice of materials. Furthermore, TENGs can also be utilized as self-powered active sensors for monitoring water environments, which relies on the output signals of the TENGs caused by the movement and composition of water. Here, TENGs targeting the harvest of different water energy sources have been systematically summarized and analyzed. The TENGs for harvesting different forms of water energy are introduced and divided on the basis of their basic working principles and modes, i.e., in the cases of solid-solid and solid-liquid. A detailed review of recent important progress in TENG-based water energy harvesting is presented. At last, based on recent progresses, the existing challenges and future prospects for TENG-based water energy harvesting are also discussed.

CaF2: A novel electrolyte for all solid-state electrochromic devices.

The energy consumption in building ventilation, air, and heating conditioning systems, accounts for about 25% of the overall energy consumption in modern society. Therefore, cutting carbon emissions and reducing energy consumption is a growing priority in building construction. Electrochromic devices (ECDs) are considered to be a highly promising energy-saving technology, due to their simple structure, active control, and low energy input characteristics. At present, H+, OH- and Li+ are the main electrolyte ions used for ECDs. However, H+ and OH- based electrolytes have a high erosive effect on the material surface and have a relatively short lifetime. Li+-based electrolytes are limited due to their high cost and safety concerns. In this study, inspired by prior research on Ca2+ batteries and supercapacitors, CaF2 films were prepared by electron beam evaporation as a Ca2+-based electrolyte layer to construct ECDs. The structure, morphology, and optical properties of CaF2 films were characterized. ECDs with the structure of ITO (indium tin oxide) glass/WO3/CaF2/NiO/ITO show short switching times (22.8 s for the coloring process, 2.8 s for the bleaching process). Additionally, optical modulation of the ECDs is about 38.8% at 750 nm. These findings indicate that Ca2+ based ECDs have the potential to become a competitive and attractive choice for large-scale commercial smart windows.

Self-Powered Respiratory Monitoring Strategy Based on Adaptive Dual-Network Thermogalvanic Hydrogels.

As a low-grade sustainable heat source, the breath waste heat exhaled by human bodies is always ignored, although producing a greater temperature than ambient. Converting this heat into electric energy for use as power sources or detecting signals is extremely important in cutting-edge wearable medicine. This heat-to-electricity conversion is possible with thermogalvanic hydrogels. However, challenges remain in their antifreezing and antidrying properties, significantly restricting the durability of thermogalvanic gels in practical applications. Herein, a dual-network poly(vinyl alcohol)/gelatin (PVA/GEL) gel thermogalvanic device with Fe(CN)63-/4- as a redox pair is developed, with an outstanding low-temperature durability and antidrying capacity. These features result from the use of a binary H2O/GL (glycerin) solvent to limit hydrogen bonding between water molecules. The prepared thermogalvanic gel patch is capable of easily converting physiological data into understandable electrical impulses using the temperature difference between the ambient environment and the heat produced by human breathing, realizing a simple self-powered respiratory monitoring strategy for the first time. Even below zero temperature, the gel patch-based mask can operate normally, implying it fits into low-temperature environments. This study sheds fresh light on the development of active wearable medical electronics that are powered by demic low-level heat.

Flexible Piezoelectric and Pyroelectric Nanogenerators Based on PAN/TMAB Nanocomposite Fiber Mats for Self-Power Multifunctional Sensors.

Self-powered wearable electronics to convert mechanical and thermal energy into electrical energy are important for biomedical monitoring, which highly require good flexibility, comfortability, signal sensitivity, and accuracy. In this work, composite nanofiber mats of polyacrylonitrile (PAN) and trimethylamine borane (TMAB) were prepared by electrospinning, which exhibited excellent piezoelectric and pyroelectric abilities in harvesting mechanical and thermal energy. The PAN/TMAB-4 nanofiber mats not only generated a high voltage of up to 2.56 V and a high power of 0.19 µW upon shape deformation but also exhibited linear voltage response to thermal gradient. The hybrid piezoelectric and pyroelectric output signals were successfully integrated together and have been applied to precisely monitor human vital signs, including elbow bending angles, foot posture, and breathing status, in real time by attaching the flexible sensors to proper human body parts. Overall, good flexibility, bifunctional sensing ability, and self-power make PAN-/TMAB-type sensors very attractive in fabricating high-performance electronics for detecting motion, monitoring health, and making portable microelectronics.

Synthesis of BaCO3 nanowires and their humidity sensitive property.

Barium carbonate (BaCO3) nanowires have been synthesized for the first time by using the composite hydroxide mediated (CHM) method. The products are characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and transmission electron microscopy (TEM). Humidity sensors based on BaCO3 nanowires have been fabricated. The response to humidity in static and dynamic measurement proves the ultrasensitive property of the sensors. The resistance changes from 386 M(omega) to 7.1 M(omega) as the relative humidity (RH) increases from 20% to 95%. The response and recovery time of the resistance is 16 s and 56 s versus the changes of relative humidity from 25% to 85%. These results indicate promising applications of BaCO3 nanowires in a highly sensitive environmental monitoring and humidity control electronic device.

Magnetorheological Elastomer-Based Self-Powered Triboelectric Nanosensor for Monitoring Magnetic Field.

The adaptable monitoring of the ubiquitous magnetic field is of great importance not only for scientific research but also for industrial production. However, the current detecting techniques are unwieldly and lack essential mobility owing to the complex configuration and indispensability of the power source. Here, we have constructed a self-powered magnetic sensor based on a subtle triboelectric nanogenerator (TENG) that consists of a magnetorheological elastomer (MRE). This magnetic sensor relies on triboelectrification and electrostatic induction to produce electrical signals in response to the MRE's deformation induced by the variational magnetic field without using any external power sources. The fabricated magnetic sensor shows a fast response of 80ms and a desirable sensitivity of 31.6 mV/mT in a magnetic field range of 35-60 mT as well as preliminary vectorability enabled by the multichannel layout. Our work provides a new route for monitoring dynamic magnetic fields and paves a way for self-powered electric-magnetic coupled applications.

Wearable Electronics Based on the Gel Thermogalvanic Electrolyte for Self-Powered Human Health Monitoring.

There is always a temperature difference of more than 10 degrees between the human body, as a sustainable heat source, and the ambient temperature. Converting body heat into electricity that in turn is used to drive personal medical electronics is of significance in smart wearable medicine. To avoid the frangibility and complex preparation of traditional thermoelectric materials, we fabricated a gel electrolyte-based thermogalvanic generator with Fe3+/Fe2+ as a redox pair, which presents not only moderate thermoelectric performance but also excellent flexibility. With a micropore-widespread polyvinylidene fluoride diaphragm implanted in the gel, a thermal barrier was created between the two halves, effectively improving the Seebeck coefficient by reducing its thermal conductivity. Considering the superior temperature response of the gel, a self-powered body temperature monitoring system was established by conformally affixing it to the forehead. Meanwhile, the gel patch with a high specific heat capacity can effectively cool down fever patients. This work may offer a new train of thought for exploiting self-powered wearable medical electronics by scavenging low-grade body heat.

Piezoelectric sensor based on graphene-doped PVDF nanofibers for sign language translation.

The tracking of body motion, such as bending or twisting, plays an important role in modern sign language translation. Here, a subtle flexible self-powered piezoelectric sensor (PES) made of graphene (GR)-doped polyvinylidene fluoride (PVDF) nanofibers is reported. The PES exhibits a high sensitivity to pressing and bending, and there is a stable correlation between bending angle and piezoelectric voltage. The sensitivity can be adjusted by changing the doping concentration of GR. Also, when the PES contacts a source of heat, a pyroelectric signal can be acquired. The positive correlation between temperature and signal can be used to avoid burns. The integrated sensing system based on multiple PESs can accurately recognize the action of each finger in real time, which can be effectively applied in sign language translation. PES-based motion-tracking applications have been effectively used, especially in human-computer interaction, such as gesture control, rehabilitation training, and auxiliary communication.

Performance of CNTs/GQD-Based Flexible Strain Sensors.

Nanomaterial-based flexible strain sensors have developed rapidly in recent years. Here, we propose a flexible strain sensor based on polydimethylsiloxane with carbon nanotubes (CNTs) and graphene quantum dots (GQDs). Different weight ratios of CNTs and GQDs were used as the sensitive units of the strain sensors. After analyzing the results of current-voltage curves and the strain effects of the sensors, we concluded that the introduction of GQDs played an important role in improving the sensitivity of the sensors. The gauge factor of the as-prepared strain sensors ranges from 0 to 841.42.

Stretchable Micromotion Sensor with Enhanced Sensitivity Using Serpentine Layout.

The application of the serpentine mesh layout in stretchable electronics provides a feasible method to achieve the desired stretchability by structural design instead of modifying the intrinsic mechanical properties of the applied materials. However, previous works using the serpentine layout mainly focused on the optimization of structural stretchability. In this paper, the serpentine mesh design concept is used to transform the high-performance but hard-to-stretch piezoelectric film into a stretchable form. The serpentine layout design strategies for the piezoelectric film, which aim at not only desired stretchability but also high utilization of the strain in the piezoelectric film during deformation, are discussed with experimental and computational results. A stretchable micromotion sensor with high sensitivity is realized using the piezoelectric film with a serpentine layout. Human voice recognition applications of the sensor, including speech pattern recognition with machine learning, are demonstrated with the sensor integrated with a wireless module. The stretchable micromotion sensor with a serpentine layout illustrates the broader application of serpentine layout design in the functional materials of stretchable electronics, which can further extend the range of available functional materials for novel stretchable electronic devices.

Tailoring the energy band in flexible photodetector based on transferred ITO/Si heterojunction via interface engineering.

Interface engineering is an important method to modulate electronic structures for improving the physical properties of semiconductors as well as designing novel devices. Recently, development of flexible electronic devices based on inorganic thin films on flexible substrates, which provides solutions to meet the emerging technological demands, may also expend the methodology of interface engineering. Herein, a semitransparent photodetector based on an indium-tin oxide (ITO)-on-silicon (Si) heterojunction was fabricated on a flexible substrate and investigated under mechanical bending strains. It is found that the barrier height of the heterojunction can be tailored continuously and reversibly from 0.23 eV to 0 eV, corresponding to the Schottky and Ohmic junctions respectively. Meanwhile, the turn-on voltage and the response time of the as-prepared photodetector can be obviously reduced under bending strain, which can be attributed to the modulation of the Si bandgap and hole mobility. Our experimental studies not only shed new light on the strain modulation mechanism of the heterojunction interface, but also pave a prominent way to integrated high-performance flexible photodetectors.

Highly stretchable and shape-controllable three-dimensional antenna fabricated by "Cut-Transfer-Release" method.

Recent progresses on the Kirigami-inspired method provide a new idea to assemble three-dimensional (3D) functional structures with conventional materials by releasing the prestrained elastomeric substrates. In this paper, highly stretchable serpentine-like antenna is fabricated by a simple and quick "Cut-Transfer-Release" method for assembling stretchable 3D functional structures on an elastomeric substrate with a controlled shape. The mechanical reliability of the serpentine-like 3D stretchable antenna is evaluated by the finite element method and experiments. The antenna shows consistent radio frequency performance with center frequency at 5.6 GHz during stretching up to 200%. The 3D structure is also able to eliminate the hand effect observed commonly in the conventional antenna. This work is expected to spur the applications of novel 3D structures in the stretchable electronics.