Dynamically manipulating long-wave infrared polarized thermal radiation by a vanadium dioxide metasurface.

Dynamically manipulating the spectra and polarization properties of thermal radiation is the key to counter an infrared polarization imaging system (IPIS) under the different background environments. In this Letter, we propose a phase-change metasurface thermal emitter (PCMTE) composed of vanadium dioxide (VO2) dipole antenna arrays to dynamically manipulate polarized radiation spectra in the long-wave infrared (LWIR) region of 8-14 µm. During the thermally induced and reversible insulator-to-metal transition (IMT) in VO2, by simulating the LWIR images at different polarization angles for the PCMTE and background plates, the PCMTE can realize dynamically tunable LWIR camouflage; then, their degree of linear polarization (DoLP) can be calculated, which can demonstrate that the PCMTE can also achieve dynamically tunable LWIR polarization camouflage at the specific radiation angles and backgrounds. Our proposed PCMTE provides an effective scheme for adaptive IR polarization camouflage.

Treadmill exercise promotes bone tissue recovery in rats subjected to high + Gz loads.

INTRODUCTION: High + Gz loads, the gravitational forces experienced by the body in hypergravity environments, can lead to bone loss in pilots and astronauts, posing significant health risks. MATERIALS AND METHODS: To explore the effect of treadmill exercise on bone tissue recovery, a study was conducted on 72 male Wistar rats. These rats were subjected to four weeks of varying levels of periodic high + Gz loads (1G, 8G, 20G) experiments, and were subsequently divided into the treadmill group and the control group. The treadmill group underwent a continuous two-week treadmill experiment, while the control group rested during this period. The mechanical properties, microstructure, and molecular markers of their tibial bone tissue were measured using three-point bending, micro-CT, and PCR. RESULTS: The results showed that treadmill exercise improved the elastic modulus, ultimate deflection, and ultimate load of rat bone tissue. It also increased the number, density, and volume fraction of bone trabeculae, and decreased their separation. Moreover, treadmill exercise enhanced osteogenesis and inhibited osteoclastogenesis. CONCLUSION: This study demonstrates that treadmill exercise can promote the recovery of bone tissue in rats subjected to high + Gz loads, providing a potential countermeasure for bone loss in pilots and astronauts.

Research Progress on Router Devices for the OAM Optical Communication.

Vortex beams carrying orbital angular momentum (OAM) provide a new degree of freedom for light waves in addition to the traditional degrees of freedom, such as intensity, phase, frequency, time, and polarization. Due to the theoretically unlimited orthogonal states, the physical dimension of OAM is capable of addressing the problem of low information capacity. With the advancement of the OAM optical communication technology, OAM router devices (OAM-RDs) have played a key role in significantly improving the flexibility and practicability of communication systems. In this review, major breakthroughs in the OAM-RDs are summarized, and the latest technological standing is examined. Additionally, a detailed account of the recent works published on techniques related to the OAM-RDs has been categorized into five areas: channel multicasting, channel switching, channel filtering, channel hopping, and channel adding/extracting. Meanwhile, the principles, research methods, advantages, and disadvantages are discussed and summarized in depth while analyzing the future development trends and prospects of the OAM-RDs.

[Research of simulated microgravity regulate MC3T3-E1 cells differentiation through the nuclear factor-kappa B signaling pathway].

In this study, we aim to investigat the effect of microgravity on osteoblast differentiation in osteoblast-like cells (MC3T3-E1). In addition, we explored the response mechanism of nuclear factor-kappa B (NF-κB) signaling pathway to "zero- g" in MC3T3-E1 cells under the simulated microgravity conditions. MC3T3-E1 were cultured in conventional (CON) and simulated microgravity (SMG), respectively. Then, the expression of the related osteoblastic genes and the specific molecules in NF-κB signaling pathway were measured. The results showed that the mRNA and protein levels of alkaline phosphatase (ALP), osteocalcin (OCN) and type Ⅰ collagen (CoL-Ⅰ) were dramatically decreased under the simulated microgravity. Meanwhile, the NF-κB inhibitor α (IκB-α) protein level was decreased and the expressions of phosphorylation of IκB-α (p-IκB-α), p65 and phosphorylation of p65 (p-p65) were significantly up-regulated in SMG group. In addition, the IL-6 content in SMG group was increased compared to CON. These results indicated that simulated microgravity could activate the NF-κB pathway to regulate MC3T3-E1 cells differentiation.

Novel Zinc Finger Transcription Factor ZFP580 Facilitates All-Trans Retinoic Acid -Induced Vascular Smooth Muscle Cells Differentiation by Rarα-Mediated PI3K/Akt and ERK Signaling.

BACKGROUND/AIMS: Phenotypic switching of vascular smooth muscle cells (VSMC) plays a vital role in the development of vascular diseases. All-trans retinoic acid (ATRA) is known to regulate VSMC phenotypes. However, the underlying mechanisms remain completely unknown. Here, we have investigated the probable roles and underlying mechanisms of the novel C2H2 zinc finger transcription factor ZFP580 on ATRA-induced VSMC differentiation. METHODS: VSMCs were isolated, cultured, and identified. VSMCs were infected with an adenovirus encoding ZFP580 or Ad-siRNA to silence ZFP580. The expression levels of ZFP580, SMα-actin, SM22α, SMemb, RARα, RARß, and RARγ were assayed by Q-PCR and western blot. A rat carotid artery injury model and morphometric analysis of intimal thickening were also used in this study. RESULTS: ATRA caused a significant reduction of VSMC proliferation and migration in a doseand time-dependent manner. Moreover, it promoted VSMC differentiation by enhancing expression of differentiation markers and reducing expression of dedifferentiation markers. This ATRA activity was accompanied by up-regulation of ZFP580, with concomitant increases in RARα expression. In contrast, silencing of the RARα gene or inhibiting RARα with its antagonist Ro41-5253 abrogated the ATRA-induced ZFP580 expression. Furthermore, ATRA binding to RARα induced ZFP580 expression via the PI3K/Akt and ERK pathways. Adenovirusmediated overexpression of ZFP580 promoted VSMC differentiation by enhancing expression of SM22α and SMα-actin and reducing expression of SMemb. In contrast, silencing ZFP580 dramatically reduced the expression of differentiation markers and increased expression of dedifferentiation markers. The classic rat carotid artery balloon injury model demonstrated that ZFP580 inhibited proliferation and intimal hyperplasia in vivo. CONCLUSION: The novel zinc finger transcription factor ZFP580 facilitates ATRA-induced VSMC differentiation by the RARα-mediated PI3K/Akt and ERK signaling pathways. This might represent a novel mechanism of regulation of ZFP580 by ATRA and RARα, which is critical for understanding the biological functions of retinoids during VSMC phenotypic modulation.

Effects of continuous or intermittent low-magnitude high-frequency vibration on fracture healing in sheep.

PURPOSE: Vibration therapy has been shown to improve fracture healing. In this study, we investigated the effects of continuous or different intermittent vibration regimens on fracture healing in sheep models on the basis of radiographs, mechanical, and biochemical testing. METHODS: The 63 right-hind metatarsals from 63 sheep (12-month-old) were osteotomized; followed by surgical fixation with a steel plate. Two weeks after the surgery, the sheep with right-hind metatarsal fractures were randomly divided into seven groups (n=9/group): control (no vibration treated), continuous vibration (CV), one, three, five, seven and 14-day intermittent vibration (named IV-1, -3, -5, -7, and -14, respectively) groups, which represented a cycle of the successive n-day vibration and successive n-day break. Vibration stimulation (F=35 Hz, a=0.25 g) lasted 15 minutes each treatment. After eight weeks with/without vibration treatment, the sheep were euthanized with intravenous anesthetic. The callus formation, mechanical properties, and biochemical compositions of fracture metatarsals were analyzed. RESULTS: In CV and IV-7 groups, X-ray images showed an increased callus volume around the fracture area. The bone elastic modulus and the concentrations of Ca, P, and Ca/P ratio of the area at 15 and 25 mm away from the fracture centerline were higher in CV and IV-7 groups compared with the other groups. CONCLUSIONS: Our results demonstrate that both CV and IV-7 vibration patterns showed better improvement of fracture healing.

Calcium Channel Opening Rather than the Release of ATP Causes the Apoptosis of Osteoblasts Induced by Overloaded Mechanical Stimulation.

BACKGROUND: Stress fracture is one of the most common overuse injuries in athletes. Overloaded mechanical stimulation is an important factor affecting stress fractures, but the mechanism is unclear. METHODS: MC3T3-E1 cells and a polycaprolactone (PCL) scaffold were co-cultured, and finite element analysis (FEA) was used to analyze the load-carrying capability. Cell proliferation was investigated with CCK-8 assays. An alkaline phosphatase (AKP) activity assay was used to evaluate cell differentiation. Cell apoptosis was analyzed using Hoechst/ PI double-labeling, Caspase-3 activity and lactate dehydrogenase (LDH) activity assays. Realtime PCR and Western blotting were used to examine the gene and protein expression, respectively, of Caspase-3 and Caspase-9. Assays of the intracellular calcium with fluorescent probe technique and extracellular ATP with fluorometric assay kit were used to analyze the changes in the intracellular calcium concentration induced by calcium channel opening and the release of ATP, respectively, at different operation times. RESULTS: When the apparent strain reached 10000 µÎµ, the strain scope of fber at levels greater than 4000 µÎµ was 60%. Overloading for 4 days and operation times of 0.5 h and 2 h increased the cell number and AKP secretion. However, apoptosis genes were activated at the same time, and the operation time of 2 h had a significantly greater effect than 0.5 h. At 8 days, the cell numbers were greater for the operation time of 0.5 h than for 2 h, and the 2-h groups had the fastest apoptosis rate. Overloading for 1 day increased intracellular calcium levels and ATP release. The increase in intracellular calcium could be blocked by the addition of N-ethylmaleimide (NEM) or Hank's medium. Overloading for 8 days increased intracellular calcium levels but decreased extracellular ATP, and verapamil blocked the increase in intracellular calcium. CONCLUSION: We found that a simultaneous 'double effect' on osteoblasts was induced by overloading, which promoted cell proliferation, differentiation and apoptosis. Short-term overloading could open the cell membrane calcium channels and release calcium stores to elevate intracellular calcium levels, thereby promoting the proliferation and differentiation of cells to a greater extent than the effect of apoptosis. For long-term overloading, calcium channel opening in the membrane could lead to overloading of intracellular calcium levels, inducing an apoptosis effect that is greater than the effect on proliferation and differentiation.

Use of an Osteoblast Overload Damage Model to Probe the Effect of Icariin on the Proliferation, Differentiation and Mineralization of MC3T3-E1 Cells through the Wnt/ß-Catenin Signalling Pathway.

BACKGROUND/AIMS: Mechanical loading plays an important role in the regulation of bone mass. However, bone cells are not always under physiological stress. In some cases, bone tissue is subjected to an overloaded mechanical environment. For example, a person who is weight training and a stevedore often experience bone pain, inflammation and other bone fatigue damage symptoms. Icariin is the major ingredient of Herba epimedii, which has been widely used for the treatment of bone injury in traditional Chinese medicine, but its mechanism remains unknown. The aim of this study was to probe the effect of icariin on the proliferation and differentiation of osteoblasts exposed to overload and to determine whether the Wnt/ß-catenin signalling pathway is involved in the drug response in osteoblasts. METHODS: Mouse MC3T3-E1 cells were exposed to mechanical tensile strain using a four- point bending device to create an overload damage model. An MTT assay was performed to determine the effects of icariin on MC3T3-E1 cell proliferation. The mRNA and protein levels of ALP, COL-I, OCN, RUNX2 and ß-catenin were assessed using RT-PCR and immunoblotting. The protein levels of ß-catenin in the MC3T3-E1 cells were also determined using fluorescence microscopy. The mineralization of osteoblasts was assessed using Alizarin Red S staining. RESULTS: We found that icariin enhanced the proliferation of osteoblasts exposed to overload and promoted MC3T3-E1 cell differentiation and mineralization. Furthermore, the gene and protein expression levels of ß-catenin and RUNX2 all increased with icariin treatment compared with those in the damage group. CONCLUSION: Our study suggested that icariin promotes proliferation and differentiation in osteoblasts exposed to overload. The effect of icariin on osteoblastic differentiation acted by activating the RUNX2 promoter and the Wnt/ß- catenin pathway.

A comparative study of mechanical strain, icariin and combination stimulations on improving osteoinductive potential via NF-kappaB activation in osteoblast-like cells.

BACKGROUND: The combination of drugs and exercise was the effective treatment in bone injure and rebuilding in clinic. As mechanical strain has potential in inducing the differentiation of osteoblasts in our previous study, the further research to investigate the combination of mechanical strain and icariin stimulation on inducing osteoblast proliferation, differentiation and the possible mechanism in MC3T3-E1 cell line. METHODS: A whole cell enzyme-linked immunosorbent assay that detects the bromodeoxyuridine incorporation during DNA synthesis was applied to evaluate the proliferation. The mRNA expression of alkaline phosphatase (ALP), osteocalcin (OCN), type I collagen (Col I), bone morphogenetic protein-2 (BMP-2) and BMP-4 was detected by real-time reverse-transcription polymerase chain reaction. The activity of ALP was analyzed by ELISA and the protein expression of OCN, Col I and BMP-2 was assessed by western blot. Moreover, the activity of nuclear transcription factor kappa-B (NF-κB) signaling pathway was investigated with the expression of inhibitor of κB (IκB) α, phosphorylation of IκB-α (P-IκB-α), p65, P-p65 by western blot. RESULTS: We observed that compared to single mechanical strain or icariin stimulation, the mRNA and protein expressions of ALP (P < 0.05 or P < 0.01), OCN (P < 0.01) and Col I (P < 0.05 or P < 0.01) were increased significantly by the combination of mechanical strain and icariin stimulation. Moreover, the combination of mechanical strain and icariin stimulation could up-regulate the expression of BMP-2 (P < 0.01) and BMP-4 compared to single mechanical strain or icariin stimulation. The combination of mechanical strain and icariin stimulation could activate NF-κB signaling pathway by increasing the expression of IκB α, P-IκB-α, p65, P-p65 (P < 0.01). CONCLUSION: The combination of mechanical strain and icariin stimulation could activate the NF-κB pathway to improve the proliferation, differentiation of osteoblast-like cells.

Mechanical Strain Affects Some Microrna Profiles in Pre-Oeteoblasts.

MicroRNAs (miRNAs) are important regulators of cell proliferation, differentiation and function. Mechanical strain is an essential factor for osteoblast proliferation and differentiation. A previous study revealed that a physiological mechanical tensile strain of 2500 microstrain (µÎµ) at 0.5 Hz applied once a day for 1 h over 3 consecutive days promoted osteoblast differentiation. However, the mechanoresponsive miRNAs of these osteoblasts were not identified. In this study, we applied the same mechanical tensile strain to in vitro cultivated mouse MC3T3-E1 pre-osteoblasts and identified the mechanoresponsive miRNAs. Using miRNA microarray and qRT-PCR assays, the expression patterns of miRNAs were evaluated and 5 of them were found to be significantly different between the mechanical loading group and the control group: miR-3077-5p, 3090-5p and 3103-5p were significantly upregulated and miR-466i-3p and 466h-3p were downregulated. Bioinformatics analysis revealed possible target genes for these differentially expressed miRNAs. Some target genes correlated with osteoblast differentiation. These findings indicated that the mechanical strain changed the expression levels of these miRNAs. This might be a potential regulator of osteoblast differentiation and responses to mechanical strain.

Integrin-ß1, not integrin-ß5, mediates osteoblastic differentiation and ECM formation promoted by mechanical tensile strain.

BACKGROUND: Mechanical strain plays a great role in growth and differentiation of osteoblast. A previous study indicated that integrin-ß (ß1, ß5) mediated osteoblast proliferation promoted by mechanical tensile strain. However, the involvement of integrin-ß in osteoblastic differentiation and extracellular matrix (ECM) formation induced by mechanical tensile strain, remains unclear. RESULTS: After transfection with integrin-ß1 siRNA or integrin-ß5 siRNA, mouse MC3T3-E1 preosteoblasts were cultured in cell culture dishes and stimulated with mechanical tensile strain of 2500 microstrain (µÎµ) at 0.5 Hz applied once a day for 1 h over 3 or 5 consecutive days. The cyclic tensile strain promoted osteoblastic differentiation of MC3T3-E1 cells. Transfection with integrin-ß1 siRNA attenuated the osteoblastic diffenentiation induced by the tensile strain. By contrast, transfection with integrin-ß5 siRNA had little effect on the osteoblastic differentiation induced by the strain. At the same time, the result of ECM formation promoted by the strain, was similar to the osteoblastic differentiation. CONCLUSION: Integrin-ß1 mediates osteoblast differentiation and osteoblastic ECM formation promoted by cyclic tensile strain, and integrin-ß5 is not involved in the osteoblasts response to the tensile strain.

Effect of the same mechanical loading on osteogenesis and osteoclastogenesis in vitro.

PURPOSE: To investigate the influence of the same mechanical loading on osteogenesis and osteoclastogenesis in vitro. METHODS: Primary osteoblasts, bone marrow-derived mesenchymal stem cells (BMSCs, cultured in osteoinductive medium) and RAW264.7 cells cultured in osteoclast inductive medium were all subjected to a 1000 µstrain (µs) at 1 Hz cyclic mechanical stretch for 30 min (twice a day). RESULTS: After mechanical stimulation, the alkaline phosphatase (ALP) activity, osteocalcin protein level of the osteoblasts and BMSCs were all enhanced, and the mRNA levels of ALP and collagen type I increased. Additionally, extracellular-deposited calcium of both osteoblasts and BMSCs increased. At the same time, the activity of secreted tartrate-resistant acid phosphatase, the number of tartrate-resistant acid phosphatase-positive multinucleated cells, matrix metalloproteinase-9 protein levels of RAW264.7 cells and the extracellular calcium solvency all decreased. CONCLUSION: The results demonstrated that 1000 µs cyclic mechanical loading enhanced osteoblasts activity, promoted osteoblastic differentiation of BMSCs and restrained osteoclastogenesis of RAW264.7 cells in vitro.

Shockwaves induce osteogenic differentiation of human mesenchymal stem cells through ATP release and activation of P2X7 receptors.

Shockwave treatment promotes bone healing of nonunion fractures. In this study, we investigated whether this effect could be due to adenosine 5'-triphosphate (ATP) release-induced differentiation of human mesenchymal stem cells (hMSCs) into osteoprogenitor cells. Cultured bone marrow-derived hMSCs were subjected to shockwave treatment and ATP release was assessed. Osteogenic differentiation and mineralization of hMSCs were evaluated by examining alkaline phosphatase activity, osteocalcin production, and calcium nodule formation. Expression of P2X7 receptors and c-fos and c-jun mRNA was determined with real-time reverse transcription polymerase chain reaction and Western blotting. P2X7-siRNA, apyrase, P2 receptor antagonists, and p38 MAPK inhibitors were used to evaluate the roles of ATP release, P2X7 receptors, and p38 MAPK signaling in shockwave-induced osteogenic hMSCs differentiation. Shockwave treatment released significant amounts (≈ 7 µM) of ATP from hMSCs. Shockwaves and exogenous ATP induced c-fos and c-jun mRNA transcription, p38 MAPK activation, and hMSC differentiation. Removal of ATP with apyrase, targeting of P2X7 receptors with P2X7-siRNA or selective antagonists, or blockade of p38 MAPK with SB203580 prevented osteogenic differentiation of hMSCs. Our findings indicate that shockwaves release cellular ATP that activates P2X7 receptors and downstream signaling events that caused osteogenic differentiation of hMSCs. We conclude that shockwave therapy promotes bone healing through P2X7 receptor signaling, which contributes to hMSC differentiation.

Extracellular matrix of mechanically stretched cardiac fibroblasts improves viability and metabolic activity of ventricular cells.

BACKGROUND: In heart, the extracellular matrix (ECM), produced by cardiac fibroblasts, is a potent regulator of heart's function and growth, and provides a supportive scaffold for heart cells in vitro and in vivo. Cardiac fibroblasts are subjected to mechanical loading all the time in vivo. Therefore, the influences of mechanical loading on formation and bioactivity of cardiac fibroblasts ECM should be investigated. METHODS: Rat cardiac fibroblasts were cultured on silicone elastic membranes and stimulated with mechanical cyclic stretch. After removing the cells, the ECMs coated on the membranes were prepared, some ECMs were treated with heparinase II (GAG-lyase), then the collagen, glycosaminoglycan (GAG) and ECM proteins were assayed. Isolated neonatal rat ventricular cells were seeded on ECM-coated membranes, the viability and lactate dehydrogenase (LDH) activity of the cells after 1-7 days of culture was assayed. In addition, the ATPase activity and related protein level, glucose consumption ratio and lactic acid production ratio of the ventricular cells were analyzed by spectrophotometric methods and Western blot. RESULTS: The cyclic stretch increased collagen and GAG levels of the ECMs, and elevated protein levels of collagen I and fibronectin. Compared with the ECMs produced by unstretched cardiac fibroblasts, the ECMs of mechanically stretched fibroblasts improved viability and LDH activity, elevated the Na⁺/K⁺-ATPase activity, sarco(endo)plasmic reticulum Ca²âº-ATPase (SERCA) activity and SERCA 2a protein level, glucose consumption ratio and lactic acid production ratio of ventricular cells seeded on them. The treatment with heparinase II reduced GAG levels of these ECMs, and lowered these metabolism-related indices of ventricular cells cultured on the ECMs. CONCLUSIONS: Mechanical stretch promotes ECM formation of cardiac fibroblasts in vitro, the ECM of mechanically stretched cardiac fibroblasts improves metabolic activity of ventricular cells cultured in vitro, and the GAG of the ECMs is involved in regulating metabolic activity of ventricular cells.

Cardiac fibroblast-derived extracellular matrix produced in vitro stimulates growth and metabolism of cultured ventricular cells.

Cardiac fibroblasts (CFs) produce extracellular matrix (ECM) which is a potent regulator of heart cell function and growth, and provides a supportive microenvironment for heart cells. Therefore, CF-derived ECM produced in vitro is very suitable for heart-cell culturing and cardiac tissue engineering. The aim of this study was to investigate the effect of CF-derived ECM produced in vitro on the growth and metabolism of cultured ventricular cells. CF-derived ECM-coated cell culture dishes were prepared by culturing rat CFs and then decellularizing the cultures. Isolated neonatal rat ventricular cells were seeded on ECM-coated, collagen I-coated or uncoated dishes, and the growth of cells after 1-5 days of culture was assayed with MTT reagent. In addition, cellular metabolic activity was analyzed by spectrophotometric methods and protein levels of sarco(endo)plasmic reticulum Ca(2+)-ATPase type 2a (SERCA2a) by Western blotting. The relative growth of ventricular cells was better on ECM-coated than on uncoated or collagen I-coated dishes. Furthermore, the glucose consumption ratio, lactic acid production ratio, Na(+)/K(+)-ATPase activity, SERCA activity and protein levels of SERCA2a were all higher in cells on the ECM-coated dishes. In conclusion, cardiac fi broblast-derived ECM produced in vitro stimulates the growth and metabolism of cultured ventricular cells. This study indicates that the bioactivity of the ECM supports heart cell growth in vitro, and this might be useful for cardiac tissue engineering.

Mechanical stimulus inhibits the growth of a bone tissue model cultured in vitro △.

OBJECTIVES: To construct the cancellous bone explant model and a method of culturing these bone tissues in vitro, and to investigate the effect of mechanical load on growth of cancellous bone tissue in vitro. METHODS: Cancellous bone were extracted from rabbit femoral head and cut into 1-mm-thick and 8-mm-diameter slices under sterile conditions. HE staining and scanning electron microscopy were employed to identify the histomorphology of the model after being cultured with a new dynamic load and circulating perfusion bioreactor system for 0, 3, 5, and 7 days, respectively. We built a three-dimensional model using microCT and analyzed the loading effects using finite element analysis. The model was subjected to mechanical load of 1000, 2000, 3000, and 4000 µÎµ respectively for 30 minutes per day. After 5 days of continuous stimuli, the activities of alkaline phosphatase (AKP) and tartrate-resistant acid phosphatase (TRAP) were detected. Apoptosis was analyzed by DNA ladder detection and caspase-3/8/9 activity detection. RESULTS: After being cultured for 3, 5, and 7 days, the bone explant model grew well. HE staining showed the apparent nucleus in cells at the each indicated time, and electron microscope revealed the living cells in the bone tissue. The activities of AKP and TRAP in the bone explant model under mechanical load of 3000 and 4000 µÎµ were significantly lower than those in the unstressed bone tissues (all P<0.05). DNA ladders were seen in the bone tissue under 3000 and 4000 µÎµ mechanical load. Moreover, there was significant enhancement in the activities of caspase-3/8/9 in the mechanical stress group of 3000 and 4000 µÎµ(all P<0.05). CONCLUSIONS: The cancellous bone explant model extracted from the rabbit femoral head could be alive at least for 7 days in the dynamic load and circulating perfusion bioreactor system, however, pathological mechanical load could affect the bone tissue growth by apoptosis in vitro. The differentiation of osteoblasts and osteoclasts might be inhibited after the model is stimulated by mechanical load of 3000 and 4000 µÎµ.

Osteoblastic molecular scaffold Gab1 is required for maintaining bone homeostasis.

The Grb2-associated binder 1 (Gab1), which serves as a scaffolding adaptor protein, plays a crucial role in transmitting key signals that control cell growth, differentiation and function from multiple receptors. However, its biological role in osteoblast activity and postnatal bone metabolism remains unclear. To elucidate the in vivo function of Gab1 in postnatal bone remodeling, we generated osteoblast-specific Gab1 knockout mice. Disruption of Gab1 expression in osteoblasts led to decreased trabecular bone mass with a reduced bone formation rate and a decreased bone resorption. Bones from Gab1 mutants also exhibited inferior mechanical properties. Moreover, primary osteoblasts from Gab1 mutant mice demonstrated markedly suppressed osteoblast mineralization, increased susceptibility to apoptosis and decreased expression of receptor activator of NF-kappaB ligand (RANKL). Activation of serine-threonine Akt kinase and extracellular signal-regulated kinase in response to insulin and insulin-like growth factor 1 was attenuated in Gab1 mutant osteoblasts. Our results show that Gab1-mediated signals in osteoblasts are crucial for normal postnatal bone homeostasis.

Mechanical strain promotes osteoblast ECM formation and improves its osteoinductive potential.

BACKGROUND: The extracellular matrix (ECM) provides a supportive microenvironment for cells, which is suitable as a tissue engineering scaffold. Mechanical stimulus plays a significant role in the fate of osteoblast, suggesting that it regulates ECM formation. Therefore, we investigated the influence of mechanical stimulus on ECM formation and bioactivity. METHODS: Mouse osteoblastic MC3T3-E1 cells were cultured in cell culture dishes and stimulated with mechanical tensile strain. After removing the cells, the ECMs coated on dishes were prepared. The ECM protein and calcium were assayed and MC3T3-E1 cells were re-seeded on the ECM-coated dishes to assess osteoinductive potential of the ECM. RESULTS: The cyclic tensile strain increased collagen, bone morphogenetic protein 2 (BMP-2), BMP-4, and calcium levels in the ECM. Compared with the ECM produced by unstrained osteoblasts, those of mechanically stimulated osteoblasts promoted alkaline phosphatase activity, elevated BMP-2 and osteopontin levels and mRNA levels of runt-related transcriptional factor 2 (Runx2) and osteocalcin (OCN), and increased secreted calcium of the re-seeded MC3T3-E1 cells. CONCLUSION: Mechanical strain promoted ECM production of osteoblasts in vitro, increased BMP-2/4 levels, and improved osteoinductive potential of the ECM. This study provided a novel method to enhance bioactivity of bone ECM in vitro via mechanical strain to osteoblasts.

Three-dimensional dynamic culture of pre-osteoblasts seeded in HA-CS/Col/nHAP composite scaffolds and treated with α-ZAL.

Pre-osteoblast MC3T3-E1 cells were cultured in hyaluronic acid-modified chitosan/collagen/nano-hydroxyapatite (HA-CS/Col/nHAP) composite scaffolds and treated with phytoestrogen α-zearalanol (α-ZAL) to improve bone tissue formation for bone tissue engineering. Perfusion and dynamic strain were applied to three-dimensional (3D) cultured cells, which simulates mechanical microenvironment in bone tissue and solves mass transfer issues. The morphology of cell-scaffold constructs in vitro was then examined and markers of osteogenesis were assessed by immunohistochemistry staining and western blotting. The results showed that cells expanded their pseudopodia in an irregular manner and dispersed along the walls in 3D-dynamic culture. Osteogenic phenotype was increased or maintained by enhanced collagen I (COLI) levels, decreased osteopontin expression and having little effect on osteocalcin expression during the 12 days of in vitro culture. In response to α-ZAL, the cell-scaffold constructs showed inhibited cellular proliferation, enhanced the alkaline phosphatase (ALP) activity and increased ratio of osteoprotegerin to receptor activator of nuclear factor kappa B (NF-κB) ligand (RANKL). Application of perfusion and dynamic strain to cells-scaffold constructs treated with α-ZAL represents a promising approach in the studies of osteogenesis stimulation of bone tissue engineering.

Mechanical properties of cracked articular cartilage under uniaxial creep and cyclic tensile loading.

Cracks may change the mechanical properties of articular cartilage, and further lead to early osteoarthritis. The study aimed to probe the mechanical properties of cracked cartilage under uniaxial tensile loading. The fracture process of cracked cartilage can be divided into two stages, namely crack-tip blunting stage and crack growth stage. The creep strain of cracked cartilage increases rapidly and then slowly with time, and it is well predicted by the nonlinear viscoelastic creep model. Compared with intact cartilage, cracked cartilage shows larger creep strain. During cyclic loading, the mean strain, degree of necking and crack-tip blunting of cracked cartilage increase with the increase of peak stress, while they decrease with the increase of loading frequency. The crack-tip morphology shows that cyclic loading has induced irreversible deformation in cartilage with a large number of collagen fibrils yielding, and further damaged the collagen fibril network of cartilage. However, no obvious crack growth is observed under the testing conditions.