Artificial Light-Harvesting System Based on Zinc Porphyrin and Benzimidazole: Construction, Resonance Energy Transfer, and Amplification Strategy for Electrochemiluminescence.

Constructing robust and efficient luminophores is of significant importance in the development of electrochemiluminescence (ECL) amplification strategies. Inspired by the resonance energy transfer in natural light-harvesting systems, we propose a novel ECL amplification system based on ECL resonance energy transfer (ECL-RET), which integrates two luminophores, benzimidazole (BIM) and zinc(II) tetrakis(4-carboxyphenyl)porphine (ZnTCPP), into one framework. Through disassembling and reconstruction processes, numerous BIM surround ZnTCPP in the constructed ZIF-9-ZnTCPP. Combined with the overlapped spectra between the emission of BIM and the absorption of ZnTCPP, the energy of multiple BIM (donor) can be concentrated to a single ZnTCPP (acceptor) to amplify the ECL emission of the acceptor. This work provides a convenient way to design an efficient ECL-RET system, which initiates a brand-new chapter in the development of ECL amplification strategies.

Post-synthetic modification-driven ZIF reconstruction and functionalization for efficient SARS-CoV-2 ECL detection.

The emergence of novel pathogens, as well as their frequent variants, raises the significance of developing superior and versatile sensing materials and techniques. Herein, a post-modified zeolitic imidazolate framework (pm-ZIF) was synthesized by using ZIF-67 as a parent MOF, and zinc(II) meso-tetra (4-carboxyphenyl) porphine (ZnTCPP) as a successive exchange ligand. Due to the preservation of the tetrahedral Co-N4 units from the ZIF precursor and the introduced porphyrin luminophores, this hybrid material pm-ZIF/P(Zn) enables the linear electrochemiluminescence (ECL) signal conversion of the target DNA concentration. An efficient biosensor that can be used to quantitatively detect SARS-CoV-2 was therefore constructed. The linear range of the sensor was 10-12-10-8 M, with a limit of detection (LOD) reaching 158 pM. Compared with the traditional amplification-based methods, the duration time of our method is significantly shortened and the quantitation of the SARS-Cov-2 RdRp gene can be completed within twenty minutes at room temperature.

Rational Design of a Highly Dispersed Fe-N-C Nanosheet with 1,10-Phenanthroline-2,9-Dicarboxylic Acid as a Preorganized Ligand: Boosted Electrochemiluminescence Detection of Tetracycline.

In view of the shortcomings of the current coreactant electrochemiluminescence (ECL) and inspired by natural oxygen (O2) reduction metalloenzymes, a novel ECL amplification strategy was established. A pyrolytic iron- and nitrogen-doped (Fe-N-C) nanosheet rich in singly ionized oxygen vacancy (VO•) defects was rationally designed by destroying the highly saturated coordination with a preorganized ligand 1,10-phenanthroline-2,9-dicarboxylic acid (PDA). Extraordinary catalytic activity for O2 activation was obtained via screening a special pyrolysis temperature using spectroscopic and electrochemical methods. The high-spin ferric centers of highly dispersed FeC nanoclusters and abundant carbon and oxygen vacancy defects fully contributed to the inherent catalytic activity. ECL amplification was achieved by integrating the material with luminol to generate redox-active radicals in situ from dissolved O2 and simultaneously shorten the transferring distance of radicals. Tetracycline (TC), which posed a growing threat to aquatic biodiversity and environmental safety, as a model antibiotic was successfully detected with a detection limit of 3.88 nM (S/N = 3), clarifying a promising application prospect of this new effective ECL amplification strategy in biological analysis and environmental monitoring.

2D Zn-Porphyrin-Based Co(II)-MOF with 2-Methylimidazole Sitting Axially on the Paddle-Wheel Units: An Efficient Electrochemiluminescence Bioassay for SARS-CoV-2.

High electrocatalytic activity with tunable luminescence is crucial for the development of electrochemiluminescence (ECL) luminophores. In this study, a porphyrin-based heterobimetallic 2D metal organic framework (MOF), [(ZnTCPP)Co2(MeIm)] (1), is successfully self-assembled from the zinc(II) tetrakis(4-carboxyphenyl)porphine (ZnTCPP) linker and cobalt(II) ions in the presence of 2-methylimidazole (MeIm) by a facile one-pot reaction in methanol at room temperature. On the basis of the experimental results and the theoretical calculations, the MOF 1 contains paddle-wheel [Co2(-CO2)4] secondary building units (SBUs) axially coordinated by a MeIm ligand, which is very beneficial to the electron transfer between the Co(II) ions and oxygen. Combining the photosensitizers ZnTCPP and the electroactive [Co2(-CO2)4] SBUs, the 2D MOF 1 possesses an excellent ECL performance, and can be used as a novel ECL probe for rapid nonamplified detection of the RdRp gene of SARS-CoV-2 with an extremely low limit of detection (≈30 aM).

Cu(II)-assisted self-assembly of dicyandiamide-derived carbon dots: construction inspired from chemical evolution and its H2O2 sensing application.

In the rapid development of artificial nanomaterials comparable to biological enzymes, we propose herein a novel concept for the construction of functional materials inspired from chemical evolution. To mimic the formation process of the catalytic system for the origin of life, dicyandiamide (DCD) was used as an elemental molecule for the de novo synthesis of an electrocatalyst. DCD was initially condensed with glucose (Glu) to form carbon dots (CDs) via a hydrothermal method. The self-assembly of the DCD-derived CDs was then modulated by introducing copper ions and a controlled pyrolysis process. Carbonization of the self-organized DCD-CDs/Cu at 300 °C in air produced the resultant catalyst (DCD-CDs/Cu-300) with the crystalline properties of a transitional state from an organic to inorganic matter, possessing a well-tuned chemical composition and the enhanced electrochemical signal of H2O2 reduction. Therefore, the DCD-CDs/Cu-300 modified electrode provides satisfactory analytical performance for trace H2O2 quantification with a wider linear range (1.0 × 10-7 to 1.4 × 10-3 M) and low detection limit (6.4 × 10-8 M, S/N = 3). This facile electrocatalyst construction strategy inspired from chemical evolution is expected to pave the way to form a more unified paradigm by integrating nanotechnology.

Postmodulation of the Metal-Organic Framework Precursor toward the Vacancy-Rich CuxO Transducer for Sensitivity Boost: Synthesis, Catalysis, and H2O2 Sensing.

Metal-organic frameworks (MOFs) act as versatile coordinators for the subsequent synthesis of high-performance catalysts by providing dispersed metal-ion distribution, initial coordination condition, dopant atom ratios, and so on. In this work, a crystalline MOF trans-[Cu(NO3)2(Him)4] was synthesized as the novel precursor of a redox-alternating CuxO electrochemical catalyst. Through simple temperature modulation, the gradual transformation toward a highly active nanocomposite was characterized to ascertain the signal enhancing mechanism in H2O2 reduction. Owing to the proprietary structure of the transducer material and its ensuing high activity, a proof-of-principle sensor was able to provide an amplified sensitivity of 2330 µA mM-1 cm-2. The facile one-pot preparation and intrinsic nonenzymatic nature also suggests its wide potentials in medical settings.

Multi-tailoring of a modified MOF-derived CuxO electrochemical transducer for enhanced hydrogen peroxide sensing.

Reasonable control of the redox states within the catalytic units together with the interconnection degrees of the substrate is of great significance in the modulation of a well-performing transducer. Herein, a novel carbon black (CB)-modified copper metal-organic framework nanomaterial (CB@Cu-MOF) prepared at room temperature was utilized as a precursor to synthesize mixed-valent copper-oxide composite catalysts (NC/CuxO-T). By tuning the carbonization process of the precursor at different temperatures (T = 100 °C, 200 °C, 300 °C and 400 °C), the different ratio configurations of the redox-alternated CuxO portions were successfully controlled with the simultaneous effective tailoring of the defect abundance in the N-doped carbon substrate. As a result, an optimized NC/CuxO-300 electrochemical H2O2 sensor was able to present a low detection limit (0.26 µM) and decent linear ranges (0.02-1.79 mM and 2.29-9.29 mM). Our strategy using easily available initial materials with mild preparation conditions is expected to promote the practical application of the star materials in laboratories.

Enhanced Electrochemiluminescence of Porphyrin-Based Metal-Organic Frameworks Controlled via Coordination Modulation.

Precise control over the composition, morphology, and size of porphyrin-based metal-organic frameworks is challenging, but the extension of these hybrid materials will enable the creation of novel electrochemiluminescence (ECL) emitters. The coordination of various entities is made from Zn2+ ions and meso-tetra(4-carboxyphenyl)porphine (TCPP), modulated by both solvent and bathophenanthrolinedisulfonic acid disodium salt (BPS) as capping agent, resulting in limited crystal growth of Zn-TCPP in DMF/H2O (v/v, 1:1) and the formation of nanoscale TCPP-Zn-BPS. The role of BPS is also evaluated using Zn-TCPP and BPS-Zn-TCPP as controls, prepared in the absence of BPS and different coordinating sequences of ligands, respectively. The newly obtained TCPP-Zn-BPS exhibits a variety of different morphologies, as well as spectral and optoelectronic properties. The ECL behavior of TCPP-Zn-BPS is investigated by using H2O2 as co-reactant. The amplification of ECL is further studied by ECL spectroscopies and cyclic voltammetry, with the corresponding mechanism proposed.

Zirconium-Based Porphyrinic Metal-Organic Framework (PCN-222): Enhanced Photoelectrochemical Response and Its Application for Label-Free Phosphoprotein Detection.

A simple and rapid photoelectrochemical (PEC) sensor was developed for the label-free detection of a phosphoprotein (α-casein) based on a zirconium based porphyrinic metal-organic framework (MOF), PCN-222, which exhibited an enhanced photocurrent response toward dopamine under the O2-saturated aqueous media. In this work, in terms of PEC measurements and cyclic voltammetry, the PEC behaviors of PCN-222 in aqueous media were thoroughly investigated for the first time. Additionally, in the virtue of the steric hindrance effect from the coordination of the phosphate groups and inorganic Zr-O clusters as binding sites in PCN-222, this biosensor showed high sensitivity for detecting α-casein and the limit of detection (LOD) was estimated to be 0.13 µg mL-1. Moreover, the proposed method provides a promising platform for clinic diagnostic and therapeutics.

The alternative strategy for designing covalent drugs through kinetic effects of pi-stacking on the self-assembled nanoparticles: a model study with antibiotics.

It is still a huge challenge to find a new strategy for rationally designing covalent drugs because most of them are discovered by serendipity. Considering that the effect of covalent drugs is closely associated with the kinetics of the reaction between drug molecule and its target protein, here we first demonstrate an example of the kinetic effect of pi-stacking of drug molecules on covalent antimicrobial drug design. When PEGylated 7-aminocephalosporanic acid (PEG-ACA) is used as a substrate drug, pi-stacking of  the ACA group via the self-assembly of PEG-ACA on the surface of gold nanoparticles (i.e. Au@ACA) exhibits antibacterial activity against E. coli fourfold higher than a PEG-ACA monomer does. The reason can be reasonably attributed to the kinetic rate enhancement for the covalent reaction between Au@ACA and penicillin binding proteins. We believe that the self-assembly of functional groups onto the surface of gold nanoparticles represents a new strategy for covalent drug design.

Ferrocyanide-Ferricyanide Redox Couple Induced Electrochemiluminescence Amplification of Carbon Dots for Ultrasensitive Sensing of Glutathione.

Here we report a novel solid-state ECL sensor for ultrasensitive sensing of glutathione (GSH) based on ferrocyanide-ferricyanide redox couple (Fe(CN)6(3-/4-)) induced electrochemiluminescence (ECL) amplification of carbon dots (C-dots). The electropolymerization of C-dots and (11-pyrrolyl-1-yl-undecyl) triethylammonium tetrafluoroborate (A2) enabled immobilization of the hydrophilic C-dots on the surface of glassy carbon electrode (GCE) perfectly, while the excellent conductivity of polypyrrole was exploited to accelerate electron transfer between them. The Fe(CN)6(3-/4-) can expeditiously convert the C-dots and S2O8(2-) to C-dot(•-) and SO4(•-), respectively. High yields of the excited state C-dots (C-dots*) were obtained, and a ∼10-fold ECL amplification was realized. The C-dots* obtained through the recombination of electron-injected and hole-injected processes may be impeded due to the interference of GSH to K2S2O8. Therefore, the constructed sensor for GSH showed a detection limit down to 54.3 nM (S/N = 3) and a wide linear range from 0.1-1.0 µM with a correlation coefficient of 0.997.

Magnetic zirconium hexacyanoferrate(II) nanoparticle as tracing tag for electrochemical DNA assay.

Novel multifunctional magnetic zirconium hexacyanoferrate nanoparticles (ZrHCF MNPs) were prepared, which consisted of magnetic beads (MBs) inner core and zirconium hexacyanoferrate(II) (ZrHCF) outer shell. As an artificial peroxidase, the ZrHCF MNPs exhibited remarkable electrocatalytic properties in the reduction of H2O2 at 0.2 V vs saturated calomel electrode (SCE). On the basis of the bonding interaction between Zr (IV) of the shell ZrHCF framework and phosphonate groups, the 5'-phosphorylated ssDNA probes with a consecutive stretch of guanines as a spacer could be incorporated in ZrHCF MNPs easily. Thus, DNA-grafted ZrHCF MNPs could be simply obtained by magnetic separation. The prepared nanoelectrocatalyst was further used as signal nanoprobe for the ultrasensitive electrochemical DNA assay. Under optimal conditions, the proposed biosensor presents high sensitivity for detecting target DNA with a linear range from 1.0 fM to 1.0 nM and a low detection limit of 0.43 fM. Moreover, it exhibits good performance with excellent selectivity, high stability, and acceptable fabrication reproducibility.

Biosensing platform based on graphene oxide via self-assembly induced by synergic interactions.

A novel self-assembled glucose biosensor based on graphene oxide (GO) was constructed by using 1-pyrenebutyric acid-N-hydroxysuccinimide ester (PANHS) as linking molecular. The stepwise self-assembly process was performed for PANHS anchoring in N,N-dimethylformamide (DMF) solvent and the further glucose oxidase (GOD) binding in aqueous solution, respectively. The molecular interactions and the morphologic properties were characterized by Fourier transform infrared spectroscopy (FTIR), field emission scanning electronic microscopy (FESEM), and atomic force microscopy (AFM). In addition, the quantitative loadings of anchored PANHS and GOD were well elucidated by surface plasmon resonance (SPR) measurements. The obtained novel glucose sensor exhibited satisfactory analytical performance to glucose: wide linear range (4.0×10(-6) to 4.4×10(-3) M), fast response (10s), high sensitivity (40.5±0.4 mA M(-1) cm(-2)), and low detection limit (2 µM, S/N=3). Furthermore, the biosensor exhibited excellent long-term stability and satisfactory reproducibility.

Micelle-Assisted Confined Coordination Spaces for Benzimidazole: Enhanced Electrochemiluminescence for Nitrite Determination.

Selective and sensitive detection of nitrite has important medical and biological implications. In the present work, to obtain an enhanced electrochemiluminescence (ECL) determination of nitrite, a novel nano-ECL emitter CoBIM/cetyltrimethylammonium bromide (CTAB) was prepared via a micelle-assisted, energy-saving, and ecofriendly method based on benzimidazole (BIM) and CTAB. Unlike conventional micelle assistance, the deprotonated BIM (BIM-) preferential placement was in the palisade layer of cationic CTAB-based micelles. Enriching the original CTAB micelle with BIM- disrupted its stability and resulted in the formation of considerably smaller BIM/CTAB-based micelles, providing a confined coordination environment for BIM- and Co2+. As a result, the growth of CoBIM/CTAB was also limited. Owing to the unusual nitration reaction between BIM and nitrite, the prepared CoBIM/CTAB was successfully applied as a novel ECL probe for the detection of nitrite with a wide linear range of 1-1500 µM and a low detection limit of 0.67 µM. This work also provides a promising ECL platform for ultrasensitive monitoring of nitrite and it was applied with sausages and pickled vegetables.

Fine tuning of porphyrin based-paddlewheel framework by imidazole derivative to boost electrochemiluminescence performance.

Precise tuning the structure of catalytic center is of great importance for the construction of enhanced electrochemiluminescence (ECL) emitters and the development of ECL amplification strategies, which is a key factor in improving the sensitivity of biosensors. In this work, we report the enhanced ECL emitters based on the porphyrin-based paddlewheel framework (PPF) with axial coordinated imidazole-like ligands (PPF/X, X = 2-methylimidazole (MeIm), imidazole (Im), benzimidazole (BIM)). In this system, the electron-donating ability of the axial ligands is positively correlated to its coordination ability to the paddlewheel units and the catalytic ability of the axially coordinated paddlewheel units. In addition, the electrochemical and ECL behavior of PPF/X (X = MeIm, Im, BIM) with different axial coordinated ligands are explored.

l-Cysteine-Tuned the Hierarchical Structure Based on Benzimidazole: Synthesis, Characterization, and Application in Ratiometric Electrochemiluminescence Immunoassay.

Efficient and robust electrochemiluminescence (ECL) emitters are crucial for enhancing the ECL immunosensor sensitivity. This study introduces a novel ECL emitter, CoBIM/Cys, featuring a hierarchical core-shell structure. The core of the structure is created through the swift coordination between the sulfhydryl and carboxyl groups of l-cysteine (l-Cys) and cobalt ions (Co2+), while the shell is constructed by sequentially coordinating benzimidazole (BIM) with Co2+. This design yields a greater specific surface area and a more intricate porous structure compared to CoBIM, markedly enhancing mass transfer and luminophore accessibility. Moreover, the l-Cys and Co2+ core introduces Co-S and Co-O catalytic sites, which improve the catalytic decomposition of H2O2, leading to an increased production of hydroperoxyl radicals (OOH•). This mechanism substantially amplifies the ECL performance. Leveraging the competitive interaction between isoluminol and BIM for OOH• during ECL emission, we developed a ratiometric immunosensor for cardiac troponin I (cTnI) detection. This immunosensor demonstrates a remarkably broad detection range (1 pg mL-1 to 10 ng mL-1), a low detection limit (0.4 pg mL-1), and exceptional reproducibility and specificity.

Tuning Dimensionality of Benzimidazole Aggregates by Using Tetraoctylammonium Bromide: Enhanced Electrochemiluminescence Studies.

Exploring the depolymerization strategy of liposoluble luminophores in the aqueous phase is vital for the development of electrochemiluminescence (ECL). In this work, tetraoctylammonium bromide (TOAB) with four long hydrophobic chains and short hydrophilic ends is used as a template to limit the aggregation of benzimidazole (BIM). By adjusting the loading of BIM on the hydrophobic chains of TOAB, a two-dimensional lamellar BIM/TOAB is formed, the ECL intensity of which is 6.4 times higher than that of the aggregated BIM (H2O2 as the coreactant). In terms of ECL spectroscopies, cyclic voltammetry , ECL transients, and the adjustment of the scanning potential range, the ECL mechanism is thoroughly studied. This work provides a new way to depolymerize organic luminophores and reveals a possible pathway in the annihilation ECL mechanism.

Hydrothermally Derived Green Carbon Dots from Broccoli Water Extracts: Decreased Toxicity, Enhanced Free-Radical Scavenging, and Anti-Inflammatory Performance.

Biomass carbon dots (CDs) derived from natural plants possess the advantages of low cost, photostability, and excellent biocompatibility, with potential applications in chemical sensing, bioimaging, and nanomedicine. However, the development of biomass CDs with excellent antioxidant activity and good biocompatibility is still a challenge. Herein, we propose a hypothesis for enhancing the antioxidant capacity of biomass CDs based on precursor optimization, extraction solvent, and other conditions with broccoli as the biomass. Compared to broccoli water extracts, broccoli powders, and broccoli organic solvent extracts, CDs derived from broccoli water extracts (BWE-CDs) have outstanding antioxidant properties due to the abundant C═C, carbonyl, and amino groups on their surface. After optimization of the preparation condition, the obtained BWE-CDs exhibit excellent free-radical scavenging activity with an EC50 of 68.2 µg/mL for DPPH• and 22.4 µg/mL for ABTS•+. Cytotoxicity and zebrafish embryotoxicity results indicated that BWE-CDs have lower cytotoxicity and better biocompatibility than that of CDs derived from organic solvents. In addition, BWE-CDs effectively scavenged reactive oxygen species (ROS) in A549 cells, 293T cells, and zebrafish, as well as eliminating inflammation in LPS-stimulated zebrafish. Mechanistic studies showed that the anti-inflammatory effect of BWE-CDs was dependent on the direct reaction of CDs with free radicals, the regulation of NO levels, and the upregulation of the expression of SOD and GPX-4. This work indicates that the antioxidant activity of CDs could be enhanced by using solvent extracts of biomass as precursors, and the obtained BWE-CDs exhibit characteristics of greenness, low toxicity, and excellent antioxidant and anti-inflammatory activities, which suggests the potential promising application of BWE-CDs as an antioxidant nanomedicine for inflammatory therapy.

Regulating the coordination capacity of ATMP using melamine: facile synthesis of cobalt phosphides as bifunctional electrocatalysts for the ORR and HER.

Due to the complexity of the synthetic process of cobalt phosphides (CoP), ongoing efforts concentrate on simplifying the preparation process of CoP. In this work, amino tris(methylene phosphonic acid) (ATMP, L1) and melamine (MA, L2) are assembled into two-dimensional (2D) organic nanostructures by hydrogen bonding and ionic interactions via a supramolecular assembly, which greatly weakens the coordination ability of L1 with Co2+. As the introduced L2 is rich in carbon and nitrogen, it allows the cobalt-organophosphate complex to be placed under a strongly reducing atmosphere during the high-temperature calcination process to achieve an in situ phosphating purpose. The resulting catalyst (N-CoP/NC) exhibits the sought-after enhanced oxygen reduction reaction (ORR) and hydrogen evolution reaction (HER) performance. For the ORR in 0.1 M KOH, an enhanced onset potential (0.908 V vs. RHE) and diffusion limiting current (6.280 mA cm-2) can be obtained, which is comparable to those of 20% Pt/C (0.911 V vs. RHE, 5.380 mA cm-2). For the HER in 0.5 M H2SO4, an overpotential of 150 mV is required to drive a current of 10 mA cm-2. Moreover, Density Functional Theory (DFT) calculations reveal the catalytic pathway of N-CoP/NC.

Schiff Base Complexes with Covalently Anchored Luminophores: Self-Enhanced Electrochemiluminescence Detection of Neomycin.

A novel electrochemiluminescence (ECL) amplification strategy was established aiming to overcome the inherent shortcomings of the current oxygen (O2) coreactant ECL systems. Macrocyclic Schiff base Fe complexes were rationally designed as a novel integrated ECL emitter by iminium linkage between N-(4-aminobutyl)-N-ethylisoluminol (ABEI) and 1,10-phenanthroline-2,9-dicarbaldehyde (PDL) and postmetalation of the macrocyclic Schiff base. Covalently combining luminophore ABEI with a catalytic center endowed the novel ECL emitter with both remarkable redox electrocatalytic properties and significantly enhanced ECL efficiency. The high content of ferrous iron and the dominantly active low-spin Fe state greatly contributed to the inherent catalytic activity for O2 activation. The rational modification of luminophore optimized the spatial distribution and simultaneously shortened the species transport distance of coreactant radicals generated in situ from dissolved O2, resulting in significantly self-enhanced ECL efficiency. Neomycin, which posed a growing threat to aquatic biodiversity and environmental safety, as the model antibiotic was successfully detected with a detection limit of 0.21 pM (S/N = 3), clarifying a promising application prospect of this new luminophore-embedded ECL amplification strategy in biological analysis and environmental monitoring.