RESUMO
The fundamental logic states of 1 and 0 in Complementary Metal-Oxide-Semiconductor (CMOS) are essential for modern high-speed non-volatile solid-state memories. However, the accumulated storage signal in conventional physical components often leads to data distortion after multiple write operations. This necessitates a write-verify operation to ensure proper values within the 0/1 threshold ranges. In this work, a non-gradual switching memory with two distinct stable resistance levels is introduced, enabled by the asymmetric vertical structure of monolayer vacancy-induced oxidized Ti3C2Tx MXene for efficient carrier trapping and releasing. This non-cumulative resistance effect allows non-volatile memories to attain valid 0/1 logic levels through direct reprogramming, eliminating the need for a write-verify operation. The device exhibits superior performance characteristics, including short write/erase times (100 ns), a large switching ratio (≈3 × 104), long cyclic endurance (>104 cycles), extended retention (>4 × 106 s), and highly resistive stability (>104 continuous write operations). These findings present promising avenues for next-generation resistive memories, offering faster programming speed, exceptional write performance, and streamlined algorithms.
RESUMO
Recently, the emergence of transverse orbital angular momentum (OAM) as a novel characteristic of light has captured substantial attention, and the significance of adjustable OAM orientation has been underscored due to its pivotal role in the interaction between light and matter. In this work, we introduce a novel approach to manipulate the orientation of photonic OAM at subwavelength scales, leveraging spatiotemporal coupling. By tightly focusing a wavepacket containing dual spatiotemporal vortices and a spatial vortex through a high numerical aperture lens, the emergence of intricate coupling phenomena leads to entangled and intricately twisted vortex tunnels. As a consequence, the orientation of spatial OAM deviates from the conventional light axis. Through theoretical scrutiny, we unveil that the orientation of photonic OAM within the focal field is contingent upon the signs of the topological charges in both spatiotemporal and spatial domains. Additionally, the absolute values of these charges govern the precise orientation of OAM within their respective quadrants. Moreover, augmenting the pulse width of the incident light engenders a more pronounced deflection angle of photonic OAM. By astutely manipulating these physical parameters, unparalleled control over the spatial orientation of OAM becomes achievable. The augmented optical degrees of freedom introduced by this study hold considerable potential across diverse domains, including optical tweezers, spin-orbit angular momentum coupling, and quantum communication.
RESUMO
Stored products are constantly infested by insects, so finding eco-friendly bioinsecticides for insect management is important. The work aimed to assess the insecticidal and repellent activity of essential oil (EO) from Hedychium glabrum S. Q. Tong, Hedychium coronarium Koen., and Hedychium yunnanense Gagnep. against Tribolium castaneum, Lasioderma serricorne, and Liposcelis bostrychophila. Results showed that 88 chemical components were identified in the extracted Hedychium EOs, indicating that they exhibited diversity in components. According to principal component analysis (PCA), the composition of the EO from the H. yunnanense stem and leaf (EOHYSL) was significantly different from other EOs due to the different organs and species. The biological activity also varied continuously with plant species and organs. Only the EO of H. yunnanense (EOHY) showed strong fumigant toxicity. While in the contact tests, EOHGR showed the strongest toxicity effect on L. bostrychophila, with a LC50 value of 71.76â µg/cm2, which was closest to the positive control (Pyrethrin). All EOs had remarkable repellent activities against the three target insects, and repellency increased with concentration. According to the results of the comprehensive score, EOHY had the highest potential, which ranged from 0.7999 to 0.8689. Thus, Hedychium EOs possess potential biorational traits to be biological insecticides.
Assuntos
Besouros , Repelentes de Insetos , Inseticidas , Óleos Voláteis , Tribolium , Zingiberaceae , Animais , Óleos Voláteis/toxicidade , Óleos Voláteis/química , Insetos , Inseticidas/química , Repelentes de Insetos/farmacologia , Repelentes de Insetos/químicaRESUMO
The development of high-purity and high-energy-density green hydrogen through water electrolysis holds immense promise, but issues such as electrocatalyst costs and power consumption have hampered its practical application. In this study, we present a promising solution to these challenges through the use of a high-performance bifunctional electrocatalyst for energy-efficient hydrogen production via coupled hydrazine degradation. The biphasic metal nitrides with highly lattice-matched structures are deliberately constructed, forming an enhanced local electric field between the electron-rich Ni3N and electron-deficient Co3N. Additionally, Mn is introduced as an electric field engine to further activate electron redistribution. Our Mn@Ni3N-Co3N/NF bifunctional electrocatalyst achieves industrial-grade current densities of 500â mA cm-2 at 0.49â V without degradation, saving at least 53.3 % energy consumption compared to conventional alkaline water electrolysis. This work will stimulate the further development of metal nitride electrocatalysts and also provide new perspectives on low-cost hydrogen production and environmental protection.
RESUMO
Strategies for discovery of high-performance electrocatalysts are important to advance clean energy technologies. Metastable phases such as low temperature or interfacial structures that are difficult to access in bulk may offer such catalytically active surfaces. We report here that the suboxide Zr3O, which is formed at Zr-ZrO2 interfaces but does not appear in the experimental Zr-O phase diagram exhibits outstanding oxygen reduction reaction (ORR) performance surpassing that of benchmark Pt/C and most transition metal-based catalysts. Addition of Fe3C nanoparticles to give a Zr-Zr3O-Fe3C/NC catalyst (NC=nitrogen-doped carbon) gives a half-wave potential (E1/2) of 0.914â V, outperforming Pt/C and showing only a 3â mV decrease after 20,000 electrochemical cycles. A zinc-air battery (ZAB) using this cathode material has a high power density of 241.1â mW cm-2 and remains stable for over 50â days of continuous cycling, demonstrating potential for practical applications. Zr3O demonstrates that interfacial or other phases that are difficult to stabilize may offer new directions for the discovery of high-performance electrocatalysts.
RESUMO
The large-scale application of direct ethanol fuel cells has long been obstructed by the sluggish ethanol oxidation reaction at the anode. Current wisdom for designing and fabricating EOR electrocatalysts has been focused on crystalline materials, which result in only limited improvement in catalytic efficiency. Here, we report the amorphous PdCu (a-PdCu) nanomaterials as superior EOR electrocatalysts. The amorphization of PdCu catalysts can significantly facilitate the C-C bond cleavage, which thereby affords a C1 path faradic efficiency as high as 69.6%. Further tailoring the size and shape of a-PdCu nanocatalysts through the delicate kinetic control can result in a maximized mass activity up to 15.25 A/mgPd, outperforming most reported catalysts. Notably, accelerated durability tests indicate that both the isotropic structure and one-dimensional shape can dramatically enhance the catalytic durability of the catalysts. This work provides valuable guidance for the rational design and fabrication of amorphous noble metal-based electrocatalysts for fuel cells.
RESUMO
Chemisorbed oxygen acts a crucial role in the redox reaction of semiconductor gas sensors, and which is of great significance for improving gas sensing performance. In this study, an oxygen-plasma-assisted technology is presented to enhance the chemisorbed oxygen for improving the formaldehyde sensing performance of SnO2electropun fiber. An inductively coupled plasma device was used for oxygen plasma treatment of SnO2electrospun fibers. The surface of SnO2electrospun fibers was bombarded with high-energy oxygen plasma for facilitating the chemisorption of electronegative oxygen molecules on the SnO2(110) surface to obtain an oxygen-rich structure. Oxygen-plasma-assisted SnO2electrospun fibers exhibited excellent formaldehyde sensing performance. The formaldehyde adsorption mechanism of oxygen-rich SnO2was investigated using density functional theory. After oxygen plasma modification, the adsorption energy and the charge transfer number of formaldehyde to SnO2were increased significantly. And an unoccupied electronic state appeared in the SnO2band structure, which could enhance the formaldehyde adsorption ability of SnO2. The gas sensing test revealed that plasma-treated SnO2electrospun fibers exhibited excellent gas sensing properties to formaldehyde, low operating temperature, high response sensitivity, and considerable cross-selectivity. Thus, plasma modification is a simple and effective method to improve the gas sensing performance of sensors.
RESUMO
BACKGROUND: Lung is one of the primary target organs of benzene, toluene, ethylbenzene, xylene, and styrene (BTEXS). Small airways dysfunction (SAD) might be a sensitive indicator of early chronic respiratory disease. Here, we explored the relationships between exposure to BTEXS and small airways function, and identified the priority control pollutants in BTEXS mixtures. METHODS: 635 petrochemical workers were recruited. Standard spirometry testing was conducted by physicians. The cumulative exposure dose (CED) of BTEXS for each worker was estimated. The peak expiratory flow (PEF), forced expiratory flow between 25 and 75% of forced vital capacity (FEF25â¼75%), and the expiratory flow rate found at 25%, 50%, and 75% of the remaining exhaled vital capacity (MEF25%, MEF50%, and MEF75%) were measured. SAD was also evaluated based on measured parameters. The associations between exposure to BTEXS individuals or mixtures and small airways function were evaluated using generalized linear regression models (GLMs) and quantile g-computation models (qgcomp). Meanwhile, the weights of each homolog in the association were estimated. RESULTS: The median CED of BTEXS are 9.624, 19.306, 24.479, 28.210, and 46.781 mg/m3·years, respectively. A unit increase in ln-transformed styrene CED was associated with a decrease in FEF25â¼75% and MEF50% based on GLMs. One quartile increased in BTEXS mixtures (ln-transformed) was significantly associated with a 0.325-standard deviation (SD) [95% confidence interval (CI): -0.464, -0.185] decline in FEF25â¼75%, a 0.529-SD (95%CI: -0.691, -0.366) decline in MEF25%, a 0.176-SD (95%CI: -0.335, -0.017) decline in MEF75%, and increase in the risk of abnormal of SAD [risk ratios (95%CI): 1.520 (95%CI: 1.143, 2.020)]. Benzene and styrene were the major chemicals in BTEXS for predicting the overall risk of SAD. CONCLUSION: Our novel findings demonstrate the significant association between exposure to BTEXS mixture and small airways function decline and the potential roles of key homologs (benzene and styrene) in SAD.
Assuntos
Benzeno , Xilenos , Benzeno/toxicidade , Derivados de Benzeno/toxicidade , Estudos Transversais , Humanos , Estireno/toxicidade , Tolueno/toxicidade , Xilenos/toxicidadeRESUMO
Antibody drug conjugates (ADCs), which harness the high targeting specificity of monoclonal antibodies (mAb) with the potency of small molecule therapeutics, are one of the fastest growing pharmaceutical classes. Nevertheless, ADC conjugation techniques and processes may introduce intrinsic heterogeneity including primary sequence variants, varied drug-to-antibody ratio (DAR) species, and drug positional isomers, which must be monitored to ensure the safety and efficacy of ADCs. Liquid chromatography coupled to mass spectrometry (LC-MS) is a powerful tool for characterization of ADCs. However, the conventional bottom-up MS analysis workflows require an enzymatic digestion step which can be time consuming and may introduce artifactual modifications. Herein, we develop an online LC-MS/MS method for rapid analysis of reduced ADCs without digestion, enabling determination of DAR, characterization of the primary sequence, and localization of the drug conjugation site of the ADC using high-resolution Fourier transform ion cyclotron resonance (FTICR) MS. Specifically, a model cysteine-linked ADC was reduced to generate six unique subunits: light chain (Lc) without drug (Lc0), Lc with 1 drug (Lc1), heavy chain (Hc) without drug (Hc0), and Hc with 1-3 drugs (Hc1-3, respectively). A concurrent reduction strategy is applied to assess ADC subunits in both the partially reduced (intrachain disulfide bonds remain intact) and fully reduced (all disulfide bonds are cleaved) forms. The entire procedure including the sample preparation and LC-MS/MS takes less than 55 min, enabling rapid multiattribute analysis of ADCs.
Assuntos
Cromatografia Líquida/métodos , Ciclotrons , Análise de Fourier , Imunoconjugados/análise , Espectrometria de Massas em Tandem/instrumentação , Imunoconjugados/química , Isomerismo , Fatores de TempoRESUMO
BACKGROUND: Ubiquitously distributed benzene is a known hematotoxin. Increasing evidence has suggested that erythroid-related hematologic parameters may be sensitive to benzene exposure. Fat content, which is also closely associated with erythroid-related hematologic parameters, may affect the distribution and/or metabolism of benzene, and eventually benzene-induced toxicity. METHODS: To explore the influence of benzene exposure, fat content, and their interactions on erythroid-related hematologic parameters, we recruited 1669 petrochemical workers and measured their urinary S-phenylmercapturic acid (SPMA) concentration and erythroid-related hematological parameters. Indices for fat content included body fat percentage (BF%), plasma total cholesterol (TC) and triglycerides (TG), and occurrence of fatty liver. RESULTS: The dose-response curve revealed U-shaped nonlinear relationships of SPMA with hematocrit (HCT) and mean corpuscular hemoglobin concentration (MCHC) (P-overall < 0.001, and P-nonlinear < 0.015), as well as positive linear associations and r-shaped nonlinear relationships of continuous fat content indices with erythroid-related hematological parameters (P-overall ≤0.005). We also observed modification effects of fat content on the associations between benzene exposure and erythroid-related hematological parameters, with workers of lower or higher BF% and TG more sensitive to benzene-induced elevation of MCHC (Pinteraction = 0.021) and benzene-induced decrease of HCT (Pinteraction = 0.050), respectively. We also found that some erythroid-related hematologic parameters differed between subgroups of workers with different SPMA levels and fat content combination. CONCLUSIONS: Our study suggested that benzene exposure, fat content, and their interactions may affect erythroid-related hematological parameters in petrochemical workers in a complex manner that are worthy of further investigation.
Assuntos
Tecido Adiposo , Benzeno/toxicidade , Composição Corporal , Exposição Ambiental/efeitos adversos , Hematologia , Lipídeos , Ocupações , Acetilcisteína/análogos & derivados , Acetilcisteína/urina , Adulto , Benzeno/metabolismo , Biomarcadores/urina , Indústria Química , Colesterol , Estudos Transversais , Suscetibilidade a Doenças , Exposição Ambiental/análise , Eritrócitos , Feminino , Hematócrito , Hemoglobinas , Humanos , Masculino , Pessoa de Meia-Idade , Exposição Ocupacional/análise , TriglicerídeosRESUMO
The synthesis of antibody-drug conjugates (ADCs) using the interchain cysteines of the antibody inherently gives a mixture of proteins with varying drug-to-antibody ratio. The drug distribution profiles of ADCs are routinely characterized by hydrophobic interaction chromatography (HIC). Because HIC is not in-line compatible with mass spectrometry (MS) due to the high salt levels, it is laborious to identify the constituents of HIC peaks. An MS-compatible alternative to HIC is reported here: native reversed phase liquid chromatography (nRPLC). This novel technique employs a mobile phase 50 mM ammonium acetate for high sensitivity in MS and elution with a gradient of water/isopropanol. The key to the enhancement is a bonded phase giving weaker drug-surface interactions compared to the noncovalent interactions holding the antibody-drug conjugates together. The hydrophobicity of the bonded phase is varied, and the least hydrophobic bonded phase in the series, poly(methyl methacrylate), is found to resolve the intact constituents of a model ADC (Ab095-PZ) and a commercial ADC (brentuximab vedotin) under the MS-compatible conditions. The nRPLC-MS data show that all species, ranging from drug-to-antibody ratios of 1 to 8, remained intact in the column. Another desired advantage of the nRPLC is the ability of resolving multiple positional isomers of ADC that are not well-resolved in other chromatographic modes. This supports the premise that lower hydrophobicity of the bonded phase is the key to enabling online nRPLC-MS analysis of antibody-drug conjugates.
Assuntos
Antineoplásicos Imunológicos/análise , Brentuximab Vedotin/análise , Cromatografia de Fase Reversa/métodos , Imunoconjugados/análise , Acetatos/química , Cromatografia Líquida de Alta Pressão/métodos , Interações Hidrofóbicas e HidrofílicasRESUMO
Antibody-drug conjugates (ADCs) are designed to combine the target specificity of monoclonal antibodies and potent cytotoxin drugs to achieve better therapeutic outcomes. Comprehensive evaluation of the quality attributes of ADCs is critical for drug development but remains challenging due to heterogeneity of the construct. Currently, peptide mapping with reversed-phase liquid chromatography (RPLC) coupled to mass spectrometry (MS) is the predominant approach to characterize ADCs. However, it is suboptimal for sequence characterization and quantification of ADCs because it lacks a comprehensive view of coexisting variants and suffers from varying ionization effects of drug-conjugated peptides compared to unconjugated counterparts. Here, we present the first middle-down RPLC-MS analysis of both cysteine (Adcetris; BV) and lysine (Kadcyla; T-DM1) conjugated ADCs at the subunit level (â¼25 kDa) with electron transfer dissociation (ETD). We successfully achieved high-resolution separation of subunit isomers arising from different drug conjugation and subsequently localized the conjugation sites. Moreover, we obtained a comprehensive overview of the microvariants associated with each subunits and characterized them such as oxidized variants with different sites. Furthermore, we observed relatively high levels of conjugation near complementarity-determining regions (CDRs) from the heavy chain but no drug conjugation near CDRs of light chain (Lc) from lysine conjugated T-DM1. Based on the extracted ion chromatograms, we accurately measured average drug to antibody ratio (DAR) values and relative occupancy of drug-conjugated subunits. Overall, the middle-down MS approach enables the evaluation of multiple quality attributes including DAR, positional isomers, conjugation sites, occupancy, and microvariants, which potentially opens up a new avenue to characterize ADCs.
Assuntos
Ado-Trastuzumab Emtansina/química , Brentuximab Vedotin/química , Imunoconjugados/análise , Imunoconjugados/química , Ado-Trastuzumab Emtansina/análise , Brentuximab Vedotin/análise , Cromatografia de Fase Reversa , Cisteína/química , Transporte de Elétrons , Lisina/química , Espectrometria de Massas em Tandem/métodosRESUMO
Structural defects have been proven to determine many of the materials' properties. Here, we demonstrate a unique approach to the creation of Ag nanowires with high-density defects through controllable nanoparticles coalescence in one-dimensional pores of mesoporous silica. The density of defects can be easily adjusted by tuning the annealing temperature during synthetic process. The high-density defects promote the adsorption and activation of more reactants on the surface of Ag nanowires during catalytic reactions. As a result, the as-prepared Ag nanowires exhibit enhanced activities in catalyzing dehydrogenative coupling reaction of silane in terms of apparent activation energy and turnover frequency (TOF). We show further that the silane conversion rate can be enhanced by maximizing the defect density and thus the number of active sites on the Ag nanowires, reaching a remarkable TOF of 8288 h(-1), which represents the highest TOF that has been achieved by far on Ag catalysts. This work not only proves the important role of structural defects in catalysis but also provides a new and general strategy for constructing high-density defects in metal catalysts.
RESUMO
Glycosylation is one of the most prominent and extensively studied protein post-translational modifications. However, traditional proteomic studies at the peptide level (bottom-up) rarely characterize intact glycopeptides (glycosylated peptides without removing glycans), so no glycoprotein heterogeneity information is retained. Intact glycopeptide characterization, on the other hand, provides opportunities to simultaneously elucidate the glycan structure and the glycosylation site needed to reveal the actual biological function of protein glycosylation. Recently, significant improvements have been made in the characterization of intact glycopeptides, ranging from enrichment and separation, mass spectroscopy (MS) detection, to bioinformatics analysis. In this review, we recapitulated currently available intact glycopeptide characterization methods with respect to their advantages and limitations as well as their potential applications.
Assuntos
Glicômica/métodos , Glicopeptídeos/química , Espectrometria de Massas/métodos , Proteômica/métodos , Animais , Glicopeptídeos/isolamento & purificação , Glicosilação , HumanosRESUMO
Protein glycosylation, an important and complex post-translational modification (PTM), is involved in various biological processes, including the receptor-ligand and cell-cell interaction, and plays a crucial role in many biological functions. However, little is known about the glycan structures of important biological complex samples, and the conventional glycan enrichment strategy (i.e., size-exclusion column [SEC] separation) prior to nuclear magnetic resonance (NMR) detection is time-consuming and tedious. In this study, we developed a glycan enrichment strategy that couples Zwitterionic hydrophilic interaction liquid chromatography (ZIC-HILIC) with dialysis to enrich the glycans from the pronase E digests of RNase B, followed by NMR analysis of the glycoconjugate. Our results suggest that the ZIC-HILIC enrichment coupled with dialysis is a simple, fast, and efficient sample preparation approach. The approach was thus applied to analysis of a biological complex sample, the pronase E digest of the secreted proteins from the fungus Aspergillus niger. The NMR spectra revealed that the secreted proteins from A. niger contain both N-linked glycans with a high-mannose core similar to the structure of the glycan from RNase B, and O-linked glycans bearing mannose and glucose with 1â3 and 1â6 linkages. In all, our study provides compelling evidence that ZIC-HILIC separation coupled with dialysis is very effective and accessible in preparing glycans for the downstream NMR analysis, which could greatly facilitate the future NMR-based glycoproteomics research.
Assuntos
Aspergillus niger/química , Cromatografia Líquida/métodos , Diálise/métodos , Proteínas Fúngicas/química , Espectroscopia de Ressonância Magnética/métodos , Polissacarídeos/análise , Polissacarídeos/isolamento & purificaçãoRESUMO
Whether adopting healthy lifestyles and maintaining moderate levels of essential metals could attenuate the reduction of heart rate variability (HRV) related to polycyclic aromatic hydrocarbons (PAHs) exposure are largely unknown. In this study, we measured urinary metals and PAHs as well as HRV, and constructed a healthy lifestyle score in 1267 coke oven workers. Linear regression models were used to explore the association of healthy lifestyle score and essential metals with HRV, and interaction analysis was performed to investigate the potential interaction between healthy lifestyle score, essential metals, and PAHs on HRV. Mean age of the participants was 41.9 years (84.5% male). Per one point higher healthy lifestyle score was associated with a 2.5% (95% CI, 1.0%-3.9%) higher standard deviation of all normal to normal intervals (SDNN), 2.1% (95% CI, 0.5%-3.6%) higher root mean square of successive differences in adjacent NN intervals (r-MSSD), 4.3% (95% CI, 0.4%-8.2%) higher low frequency, 4.4% (95% CI, 0.2%-8.5%) higher high frequency, and 4.4% (95% CI, 1.2%-7.6%) higher total power, respectively. Urinary level of chromium was positively associated with HRV indices, with the corresponding ß (95% CI) (%) was 5.17 (2.84, 7.50) for SDNN, 4.29 (1.74, 6.84) for r-MSSD, 12.26 (6.08, 18.45) for low frequency, 12.61 (5.87, 19.36) for high frequency, and 11.31 (6.19, 16.43) for total power. Additionally, a significant interaction was found between healthy lifestyle score and urinary total hydroxynaphthalene on SDNN (Pinteraction = 0.04), and higher level of urinary chromium could attenuate the adverse effect of total hydroxynaphthalene level on HRV (all Pinteraction <0.05). Findings of our study suggest adopting healthy lifestyle and maintaining a relatively high level of chromium might attenuate the reduction of HRV related to total hydroxynaphthalene exposure.
Assuntos
Coque , Exposição Ocupacional , Hidrocarbonetos Policíclicos Aromáticos , Humanos , Masculino , Adulto , Feminino , Hidrocarbonetos Policíclicos Aromáticos/urina , Frequência Cardíaca , Coque/análise , Naftóis/análise , Naftóis/farmacologia , Metais/urina , Cromo/análise , Cromo/farmacologia , Estilo de Vida Saudável , Exposição Ocupacional/análiseRESUMO
Nitrogen dioxide (NO2) is a significant environmental and human health hazard. Current NO2 sensors often lack sensitivity and selectivity under ambient conditions. This study investigates ammonia pyrolysis modification of monolayer Ti3C2Tx MXene to enhance NO2 detection at room temperature. Nitrogen-doped Ti3C2Tx demonstrates a substantial improvement in sensitivity, with a response of 8.87% to 50 ppm of NO2 compared to 0.65% for the original sensor, representing a 13.8-fold increase. The nitrogen-doped sensor also exhibits superior selectivity and linearity for NO2 under ambient conditions. Theoretical analysis shows that nitrogen incorporation promotes enhanced interaction between Ti3C2Tx and its surface oxygen-containing functional groups through electronic hybridization, resulting in improved adsorption energy (1.80 |eV|) and electron transfer efficiency (0.67 |e|) for NO2, thereby enhancing its gas-sensing performance. This study highlights the potential of ammonia pyrolysis-treated Ti3C2Tx MXene for advancing NO2 sensor technologies with heightened performance at room temperature.
RESUMO
Efficient gas sensors are critical for environmental monitoring and industrial safety. While metal oxide semiconductor (MOS) sensors are cost-effective, they struggle with poor selectivity, high operating temperatures, and limited stability. Electrochemical sensors, though selective and energy-efficient, face high costs, and stability issues due to precious metal catalysts like platinum on carbon (Pt/C). Herein, a novel, cost-effective electrochemical sensor using nitrogen-doped indium oxide In2O3- xN2 x /3Vx /3 (0.01≤x≤0.14), synthesized with varying nitriding times is presented. The optimized In2O3 N-40 min sensor demonstrates a remarkable response current of 771 nA to 10 ppm nitrogen dioxide (NO2) at ambient temperature, with outstanding long-term stability (over 30 days) and rapid response/recovery times (5/16 s). Compared to Pt/C sensors, it shows 84% and 67% reductions in response and recovery times, respectively, and maintains 98% performance after a month, versus 68% for Pt/C. This cost-effective sensor presents a promising alternative for electrochemical gas sensing, eliminating the need for precious metal catalysts.
RESUMO
Fuel cell gas sensors have emerged as promising advanced sensing devices owing to their advantageous features of low power consumption and cost-effectiveness. However, commercially available Pt/C electrodes pose significant challenges in terms of stability and accurate detection of low concentrations of target gases. Here, we introduce an efficient Cu-Pt/CrN-based fuel cell gas sensor, designed specifically for the ultrasensitive detection of hydrogen sulfide (H2S) at room temperature. Compared to the commercial Pt/C sensor, the Cu-Pt/CrN sensor exhibits excellent sensitivity (0.26 µA/ppm), with an increase in the selectivity by a factor of 2.5, and demonstrates good stability over a 2 month period. The enhanced sensing performance can be attributed to the modulation of the electronic arrangement of Pt by Cu, resulting in an augmentation of H2S adsorption. The Cu-Pt/CrN fuel cell gas sensor provides an opportunity for detecting parts per billion-level H2S in various applications.
Assuntos
Gases , Sulfeto de Hidrogênio , Temperatura , EletrodosRESUMO
The ocean, a vast hydrogen reservoir, holds potential for sustainable energy and water development. Developing high-performance electrocatalysts for hydrogen production under harsh seawater conditions is challenging. Here, we propose incorporating a protective V2O3 layer to modulate the microcatalytic environment and create in situ dual-active sites consisting of low-loaded Pt and Ni3N. This catalyst demonstrates an ultralow overpotential of 80 mV at 500 mA cm-2, a mass activity 30.86 times higher than Pt-C and maintains at least 500 hours in seawater. Moreover, the assembled anion exchange membrane water electrolyzers (AEMWE) demonstrate superior activity and durability even under demanding industrial conditions. In situ localized pH analysis elucidates the microcatalytic environmental regulation mechanism of the V2O3 layer. Its role as a Lewis acid layer enables the sequestration of excess OH- ions, mitigate Cl- corrosion, and alkaline earth salt precipitation. Our catalyst protection strategy by using V2O3 presents a promising and cost-effective approach for large-scale sustainable green hydrogen production.