Synergistic effect of split DNA activators of Cas12a with exon-unwinding and induced targeting effect.

CRISPR-Cas12a, an RNA-guided nuclease, has been repurposed for genome editing and molecular diagnostics due to its capability of cis-cleavage on target DNA and trans-cleavage on non-target single-strand DNA (ssDNA). However, the mechanisms underlying the activation of trans-cleavage activity of Cas12a, particularly in the context of split DNA activators, remain poorly understood. We elucidate the synergistic effect of these activators and introduce the concepts of induced targeting effect and exon-unwinding to describe the phenomenon. We demonstrate that upon binding of split DNA activators adjacent to the Protospacer Adjacent Motif (PAM) to the Cas12a ribonucleoprotein (Cas12a-RNP), a ternary complex form that can capture and interact with distal split DNA activators to achieve synergistic effects. Notably, if the distal activator is double-strand DNA (dsDNA), the complex initiates exon-unwinding, facilitating the RNA-guide sequence's access. Our findings provide a mechanistic insight into action of Cas12a and propose a model that could significantly advance our understanding of its function.

CRISPR-Responsive RCA-Based DNA Hydrogel Biosensing Platform with Customizable Signal Output for Rapid and Sensitive Nucleic Acid Detection.

Current nucleic acid-responsive DNA hydrogels face significant challenges, such as the requirement for high target concentrations, frequent redesigns, and increased costs, which limit their practical applications in biosensing. To address these issues, we developed a novel biosensing platform integrating a CRISPR/Cas12a system into an RCA-based DNA hydrogel. The hydrogel used in the platform could preencapsulate diverse signal molecules comprising GelRed, methylene blue, and gold nanoparticles, which were released upon Cas12a-mediated cleavage. This design enabled customizable signal output, including fluorescence, electrochemistry, and colorimetry, thereby ensuring the platform's adaptability to various detection scenarios. Our platform was highly specific for methicillin-resistant Staphylococcus aureus, with a mecA gene detection limit of 10 copies/µL, and provided fast and accurate results within 2 h for clinical samples. Hence, based on these advantages, the proposed biosensing platform exhibits promising application prospects in the field of nucleic acid detection.

A colorimetric, photothermal, and fluorescent triple-mode CRISPR/cas biosensor for drug-resistance bacteria detection.

A multimodal analytical strategy utilizing different modalities to cross-validate each other, can effectively minimize false positives or negatives and ensure the accuracy of detection results. Herein, we establish a colorimetric, photothermal, and fluorescent triple modal CRISPR/Cas12a detection platform (CPF-CRISPR). An MNPs-ssDNA-HRP signal probe is designed to act as a substrate to trigger three signal outputs. In the presence of the DNA target, MNPs-ssDNA-HRP is cleaved by the activated CRISPR/Cas12a, resulting in the release of HRP and generating short DNA strands with 3-terminal hydroxyl on magnetic beads. The released HRP subsequently catalyzed TMB-H2O2 reaction and oxidized TMB is used for colorimetric and photothermal signal detection. Under the catalysis of terminal deoxynucleotidyl transferase (TdT), the remaining short DNA strands are used as primers to form poly-T and function as scaffolds to form copper nanoclusters for fluorescent signal output. To verify the practical application of CPF-CRISPR, we employed MRSA as a model. The results demonstrate the platform's high accuracy and sensitivity, with a limit of detection of 101 CFU/mL when combined with recombinase polymerase amplification. Therefore, by harnessing the programmability of CRISPR/Cas12a, the biosensor has the potential to detect various drug-resistant bacteria, demonstrating significant practical applicability.

Multichannel bacterial discrimination based on recognition and disintegration disparity of short antimicrobial peptides.

In this paper, we present a facile and rapid multichannel approach for the simultaneous detection and discrimination of multiple bacterial species. The proposed assay employed four short antimicrobial peptides (SAMPs) for recognition due to their disparity in antibacterial activity against different bacterial strains, and utilized fluorescence measurements to explicate the bacterial recognition and disintegration disparity of the SAMPs. Then, linear discriminant analysis (LDA) was used to effectively discriminate and classify the observed characteristic fluorescence patterns of SAMPs towards target bacteria, exhibiting excellent bacterial discrimination and classification accuracy. This is the first report on the use of SAMPs as recognition units for simultaneous multiple bacterial detection and discrimination. The presented approach was simple, fast, highly repeatable, and required no labelling processes. According to the corresponding LDA discriminant results, six different target bacterial species could be effectively identified and discriminated within 30 min.

Fluorometric detection of sulfate-reducing bacteria via the aggregation-induced emission of glutathione-gold(I) complexes.

It is reported that gold(I)-thiolate complexes can display aggregation-induced emission (AIE) similar to organic fluorogens. On addition of lead(II) to glutathione-gold(I) complexes, a supermolecular structure of type GSH-Au(I)-Pb(II) is formed through strong coordination between Pb(II) and GSH. Its fluorescence is quenched by sulfide due to the formation of PbS which destroys the GSH-Au(I)-Pb(II) complex. The finding was used to design a method for fluorometric detection of sulfate-reducing bacteria (SRB) which produce sulfide. The time needed to reduce fluorescence to 10% of its initial intensity linearly dependent on the logarithm of the SRB concentrations in the ranging from 10 to 1 × 10^7 cfu mL-1. The assay time is also reduced down to 4 days even if the SRB concentration is as low as 10 cfu mL-1. Graphical abstract Schematic presentation of aggregation-induced emission (AIE)-active GSH-Au(I) complexes based fluorescence detection of SRB. The GSH-Au(I) complexes turn into aggregation and display strong emissive property in the presence of Pb2+. Then the fluorescence of GSH-Au(I)-Pb(II) complexes can be quenched by S2- generated by SRB.

3D-DNA walking nanomachine based on catalytic hairpin assembly and copper nanoclusters for sensitive detection of hepatitis C virus.

Rapid and accurate detection of the hepatitis C virus (HCV) is essential for early diagnosis and prevention of virus transmission. This study presents a novel approach that combines the three-dimensional (3D)-DNA walking nanomachine with catalytic hairpin assembly (CHA) and copper nanoclusters (CuNCs). By integrating CHA with the 3D DNA walking nanomachine, efficient target amplification on 3D surfaces was achieved, leading to improved reaction speed and detection performance. Terminal deoxynucleotidyl transferase (TdT) was utilized to generate T-rich DNA sequences. These sequences served as templates for the formation of CuNCs, which functioned as the readout signal. The optimized 3D-DNA walking nanomachine exhibited excellent sensitivity in detecting HCV, with a detection limit of 42.4 pM and a linear range of 100 pM to 2 nM. The biosensor demonstrated excellent selectivity and reproducibility, with a recovery rate ranging from 94% to 108% for the detection of real samples. This design holds great potential for sensitive, label-free, and reliable detection of HCV in clinical settings. Furthermore, the versatility of this approach allows for the customization of target sequences, thereby facilitating the detection of various nucleic acid targets. Therefore, this method has the potential to advance personalized medicine, disease management, and genetic analysis in the field of molecular diagnosis.

A one-pot loop-mediated isothermal amplification platform using fluorescent gold nanoclusters for rapid and naked-eye pathogen detection.

Loop-mediated isothermal amplification (LAMP) is a rapid and sensitive nucleic acid testing method for pathogen detection, yet the absence of a straightforward readout strategy remains challenging. We've successfully designed polyethyleneimine-stabilized gold nanoclusters (PEI-AuNCs) as a cationic AuNCs indicator tailored for distinguishing LAMP results, enabling direct visual inspection under UV light. Positive LAMP reactions with PEI-AuNCs, in combination with magnesium pyrophosphate crystals, yield red-fluorescent bulk precipitates visible to the naked eye. To address contamination concerns, we introduced a one-pot reaction by incorporating AuNCs into the lid recess. This one-pot LAMP assay demonstrates exceptional detection capability, identifying Salmonella enterica at concentrations as low as 101 CFU/mL within approximately 50 min, excluding nucleic acid extraction. The platform's versatility, achieved through customizable primers, positions it as a promising molecular diagnostic tool for rapid and visual pathogen detection across scientific disciplines.

High-throughput nanopore targeted sequencing for efficient drug resistance assay of Mycobacterium tuberculosis.

Drug-resistant tuberculosis (TB), especially multidrug-resistant tuberculosis (MDR-TB) and extensively drug-resistant tuberculosis (XDR-TB), is one of the urgent clinical problems and public health challenges. Culture-based phenotypic drug susceptibility testing (pDST) is time-consuming, and PCR-based assays are limited to hotspot mutations. In this study, we developed and validated a convenient and efficient approach based on high-throughput nanopore sequencing technology combined with multiplex PCR, namely nanopore targeted sequencing (NTS), to simultaneously sequence 18 genes associated with antibiotic resistance in Mycobacterium tuberculosis (MTB). The analytical performance of NTS was evaluated, and 99 clinical samples were collected to assess its clinical performance. The NTS results showed that MTB and its drug resistance were successfully identified in approximately 7.5 h. Furthermore, compared to the pDST and Xpert MTB/RIF assays, NTS provided much more drug resistance information, covering 14 anti-TB drugs, and it identified 20 clinical cases of drug-resistant MTB. The mutations underlying these drug-resistant cases were all verified using Sanger sequencing. Our approach for this TB drug resistance assay offers several advantages, including being culture-free, efficient, high-throughput, and highly accurate, which would be very helpful for clinical patient management and TB infection control.

An Ultrasensitive Colorimetric Foodborne Pathogenic Detection Method Using a CRISPR/Cas12a Mediated Strand Displacement/Hybridization Chain Reaction.

Accurate, rapid, and sensitive pathogenic detections play an important role in food safety. Herein, we developed a novel CRISPR/Cas12a mediated strand displacement/hybridization chain reaction (CSDHCR) nucleic acid assay for foodborne pathogenic colorimetric detection. A biotinylated DNA toehold is coupled on avidin magnetic beads and acts as an initiator strand to trigger the SDHCR. The SDHCR amplification allowed the formation of long hemin/G-quadruplex-based DNAzyme products to catalyze the TMB-H2O2 reaction. In the presence of the DNA targets, the trans-cleavage activity of CRISPR/Cas12a was activated to cleave the initiator DNA, resulting in the failure of SDHCR and no color change. Under optimal conditions, the CSDHCR has a satisfactory linear detection of DNA targets with a regression equation Y = 0.0531*X - 0.0091 (R2 = 0.9903) in the range of 10 fM to 1 nM, and the limit of detection was determined as 4.54 fM. In addition, Vibrio vulnificus, one foodborne pathogen, was used to verify the practical application of the method, and it showed satisfactory specificity and sensitivity with a limit of detection at 1.0 × 100 CFU/mL coupling with recombinase polymerase amplification. Our proposed CSDHCR biosensor could be a promising alternative method for ultrasensitive and visual detection of nucleic acids and the practical application of foodborne pathogens.

Rapid photothermal detection of foodborne pathogens based on the aggregation of MPBA-AuNPs induced by MPBA using a thermometer as a readout.

Rapid and portable detection of foodborne pathogens is of great significance for food safety and public health. The colorimetric methods based on naked-eye have been demonstrated to be a suitable qualitative method for point-of-care testing (POCT). However, analytical instruments like a microplate reader must be needed for the quantitative assay. To overcome its limitation, we herein report a novel photothermal method for foodborne pathogens based on the photothermal effect of aggregated mercaptophenylboronic acid-functionalized AuNPs (MPBA-AuNPs) induced by MPBA to translate the colorimetric detection into a simple temperature measurement using thermometers as the readout. The aggregated AuNPs show higher photothermal conversion efficiency than well-separated AuNPs under 660 nm laser irradiation. In the presence of bacteria, MPBA-AuNPs will attach to the surface of bacteria and keep separated from aggregation induced by excess MPBA, resulting in a lower temperature increase under 660 nm laser irradiation. Using E. coli O157:H7 as a model target, a good linear relationship is observed between temperature increase and bacteria concentration from 1.00 × 105-1.00 × 109 cfu mL-1 (R2 = 0.9877) with a detection limit of 1.97 × 104 cfu mL-1, which is three orders of magnitude lower than of the MPBA-AuNPs-based colorimetric assays. The proposed photothermal method provided a universal platform for rapid and portable detection of broad-spectrum bacteria strains in real samples.

Cu-MOF@Pt 3D nanocomposites prepared by one-step wrapping method with peroxidase-like activity for colorimetric detection of glucose.

As an alternative to natural enzymes, artificial enzymes based on nanomaterials have attracted a lot of attention owing to their outstanding catalytic activity and high stability as well as low cost. Cu-MOF loaded with platinum nanoparticles (labeled Cu-MOF@Pt) was prepared by simple one-step wrapping method using platinum nanoparticles, copper nitrate trihydrate and 1,3,5-tricarboxybenzene. It was confirmed that Cu-MOF@Pt exhibits peroxidase-like activity, which can quickly catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) and produce blue oxidized TMB (oxTMB) in the presence of hydrogen peroxide (H2O2). Additionally, steady-state kinetics showed that Cu-MOF@Pt exhibits stronger appetency to TMB and H2O2 compared with horseradish peroxidase. Thanks to the peroxidase-like activity of Cu-MOF@Pt, a highly selective colorimetric method for glucose detection has been successfully established, the linear range is 2-15 mM (R2 =0.9999) and the Limit of Detection (LOD) is 0.42 mM, with a detection range that meets clinical needs. Moreover, its good intra- and inter-assay precision and excellent stability make the results of glucose detection very reproducible. The detection performance of 90.09% was still maintained at 4 â„ƒ for 2 months. In conclusion, a new nanocomposite was successfully prepared and its selective detection ability for glucose was proved, which established a good basis for the clinical development of new enzymes for biosensors.

A novel detection method for the pathogenic Aeromonas hydrophila expressing aerA gene and/or hlyA gene based on dualplex RAA and CRISPR/Cas12a.

Aeromonas hydrophila is an emerging waterborne and foodborne pathogen with pathogenicity to humans and warm water fishes, which severely threatens human health, food safety and aquaculture. A novel method for the rapid, accurate, and sensitive detection of pathogenic A. hydrophila is still needed to reduce the impact on human health and aquaculture. In this work, we developed a rapid, accurate, sensitive, and visual detection method (dRAA-CRISPR/Cas12a), without elaborate instruments, integrating the dualplex recombinase-assisted amplification (dRAA) assay and CRISPR/Cas12a system to detect pathogenic A. hydrophila expressing aerA and/or hlyA virulence genes. The dRAA-CRISPR/Cas12a method has high sensitivity, which can rapidly detect (about 45 min) A. hydrophila with the limit of detection in 2 copies of genomic DNA per reaction, and has high specificity for three pathogenic A. hydrophila strains (aerA+hlyA- , aerA-hlyA+ , and aerA+hlyA+ ). Moreover, dRAA-CRISPR/Cas12a method shows satisfactory practicability in the analysis of the spiked human blood and stool and fish samples. These results demonstrate that our developed pathogenic A. hydrophila detection method, dRAA-CRISPR/Cas12a, is a promising potential method for the early diagnosis of human A. hydrophila infection and on-site detection of A. hydrophila in food and aquaculture.

One-step synthesized antimicrobial peptide-functionalized gold nanoclusters for selective imaging and killing of pathogenic bacteria.

The development of multifunctional nanomaterials with bacterial imaging and killing activities is of great importance for the rapid diagnosis and timely treatment of bacterial infections. Herein, peptide-functionalized gold nanoclusters (CWR11-AuNCs) with high-intensity red fluorescence were successfully synthesized via a one-step method using CWR11 as a template and by optimizing the ratio of CWR11 to HAuCl4, reaction time, pH, and temperature. The CWR11-AuNCs bound to bacteria and exhibited selective fluorescence microscopy imaging properties, which is expected to provide a feasible method for locating and imaging bacteria in complex in vivo environments. In addition, CWR11-AuNCs not only retained the antibacterial and bactericidal activities of CWR11 but also exhibited certain inhibitory or killing effects on gram-negative and gram-positive bacteria and biofilms. The MICs of CWR11-AuNCs against Escherichia coli and Staphylococcus aureus were 178 and 89 µg/ml, respectively. Surprisingly, cell viability in the CWR11-AuNC-treated group was greater than that in the CWR11-treated group, and the low cytotoxicity exhibited by the CWR11-AuNCs make them more promising for clinical applications.

Rapid and Sensitive Detection of Vibrio vulnificus Using CRISPR/Cas12a Combined With a Recombinase-Aided Amplification Assay.

Vibrio vulnificus is an important zoonotic and aquatic pathogen and can cause vibriosis in humans and aquatic animals (especially farmed fish and shrimp species). Rapid and sensitive detection methods for V. vulnificus are still required to diagnose human vibriosis early and reduce aquaculture losses. Herein, we developed a rapid and sensitive diagnostic method comprising a recombinase-aided amplification (RAA) assay and the CRISPR/Cas12a system (named RAA-CRISPR/Cas12a) to detect V. vulnificus. The RAA-CRISPR/Cas12a method allows rapid and sensitive detection of V. vulnificus in 40 min without a sophisticated instrument, and the limit of detection is two copies of V. vulnificus genomic DNA per reaction. Meanwhile, the method shows satisfactory specificity toward non-target bacteria and high accuracy in the spiked blood, stool, and shrimp samples. Therefore, our proposed rapid and sensitive V. vulnificus detection method, RAA-CRISPR/Cas12a, has great potential for early diagnosis of human vibriosis and on-site V. vulnificus detection in aquaculture and food safety control.

Rapid Detection and Antimicrobial Susceptibility Testing of Pathogens Using AgNPs-Invertase Complexes and the Personal Glucose Meter.

Rapid detection of pathogens and assessment of antimicrobial susceptibility is of great importance for public health, especially in resource-limiting regions. Herein, we developed a rapid, portable, and universal detection method for bacteria using AgNPs-invertase complexes and the personal glucose meter (PGM). In the presence of bacteria, the invertase could be released from AgNPs-invertase complexes where its enzyme activity of invertase was inhibited. Then, the enzyme activity of invertase was restored and could convert sucrose into glucose measured by a commercially PGM. There was a good linear relationship between PGM signal and concentration of E. coli or S. aureus as the bacteria model with high sensitivity. And our proposed biosensor was proved to be a rapid and reliable method for antimicrobial susceptibility testing within 4 h with consistent results of Minimum Inhibitory Concentrations (MICs) testing, providing a portable and convenient method to treat infected patients with correct antibiotics and reduce the production of antibiotic-resistant bacteria, especially for resource-limiting settings.

RAA-Cas12a-Tg: A Nucleic Acid Detection System for Toxoplasma gondii Based on CRISPR-Cas12a Combined with Recombinase-Aided Amplification (RAA).

Toxoplasmosis, caused by the intracellular protozoon Toxoplasma gondii, is a significant parasitic zoonosis with a world-wide distribution. As a main transmission route, human infection can be acquired by the ingestion of T. gondii oocysts from the environment (e.g., soil, water, fruits and vegetables). Regarding the detection of T. gondii oocysts in environmental samples, the development of a time-saving, cost-effective and highly sensitive technique is crucial for the surveillance, prevention and control of toxoplasmosis. In this study, we developed a new method by combining recombinase-aided amplification (RAA) with CRISPR-Cas12a, designated as the RAA-Cas12a-Tg system. Here, we compared this system targeting the 529 bp repeat element (529 bp-RE) with the routine PCR targeting both 529 bp-RE and ITS-1 gene, respectively, to assess its ability to detect T. gondii oocysts in soil samples. Our results indicated that the 529 bp RE-based RAA-Cas12a-Tg system was able to detect T. gondii successfully in nearly an hour at body temperature and was more sensitive than the routine PCR assay. The sensitivity of this system reached as low as 1 fM with high specificity. Thus, RAA-Cas12a-Tg system provided a rapid, sensitive and easily operable method for point-of-care detection of T. gondii oocysts in soil, which will facilitate the control of T. gondii infection in humans and animals.

Lectin functionalized ZnO nanoarrays as a 3D nano-biointerface for bacterial detection.

The detection of pathogenic bacteria is essential in various fields, such as food safety, water environmental analysis, or clinical diagnosis. Although rapid and selective techniques have been achieved based on the fast and specific binding of recognitions elements and target, the sensitive detection of bacterial pathogens was limited by their low targets-binding efficiency. The three-dimensional (3D) nano-biointerface, compared with the two-dimensional (2D) flat substrate, has a much higher binding capacity, which can offer more reactive sites to bind with bacterial targets, resulting in a great improvement of detection sensitivity. Herein, a lectin functionalized ZnO nanorod (ZnO-NR) array has been fabricated and employed as a 3D nano-biointerface for Escherichia coli (E. coli) capture and detection by multivalent binding of concanavalin A (ConA) with polysaccharides on the cellular surface of E. coli. The 3D lectin functionalized ZnO-NR array-based assay shows reasonable detection limit and efficiently expanded linear range (1.0×103 to 1.0×107 cfumL-1) for pathogen detection. The platform has a potential for further applications and provides an excellent sensitivity approach for detection of pathogenic bacteria.

Lysozyme as a recognition element for monitoring of bacterial population.

Bacterial infections remain a significant challenge in biomedicine and environment safety. Increasing worldwide demand for point-of-care techniques and increasing concern on their safe development and use, require a simple and sensitive bioanalysis for pathogen detection. However, this goal is not yet achieved. A design for fluorescein isothiocyanate-labeled lysozyme (FITC-LYZ), which provides quantitative binding information for gram-positive bacteria, Micrococcus luteus, and detects pathogen concentration, is presented. The functional lysozyme is used not only as the pathogenic detection platform, but also as a tracking reagent for microbial population in antibacterial tests. A nonlinear relationship between the system response and the logarithm of the bacterial concentration was observed in the range of 1.2×10(2)-1.2×10(5) cfu mL(-1). The system has a potential for further applications and provides a facile and simple method for detection of pathogenic bacteria. Meanwhile, the fluorescein isothiocyanate -labeled lysozyme is also employed as the tracking agent for antibacterial dynamic assay, which show a similar dynamic curve compared with UV-vis test.

Multifunctional semiconducting polymer dots for imaging, detection, and photo-killing of bacteria.

Bacterial infections remain a key challenge in medicine and environment safety. Motivated by current clinical requirements, numerous diagnostic and therapeutic nanomaterials have emerged. Here, a family of agents, termed as antibiotic-based multifunctional semiconducting polymer dots (Pdots), which can detect bacteria with high sensitivity and selectively kill gram-positive bacteria or gram-negative bacteria, are reported. The multifunctional Pdots that exhibit good flexibility and stability at room temperature are usually small, and they can easily be modified to biomolecules. The highlight of this work is about how the developed bioconjugated Pdot system simultaneously possesses the abilities of detection, imaging, and pathogen photo-killing. This study not only demonstrates a facile approach to fabricate a bioconjugated probe for bacteria detection, but also provides a powerful and reliable platform for the photo-killing of pathogens, thus rendering potential broad antibacterial applications, bacteria diagnosis, and live-image assays.