Simultaneous Electrochemical Detection of Catechol and Hydroquinone Based on a Carbon Nanotube Paste Electrode Modified with Electro-Reduced Graphene Oxide.

Effectively detecting catechol (CC) and hydroquinone (HQ) simultaneously is crucial for environmental protection and human health monitoring. In the study presented herein, a novel electrochemical sensor for the sensitive simultaneous detection of CC and HQ was constructed based on an electrochemically reduced graphene oxide (ERGO)-modified multi-walled carbon nanotube paste electrode (MWCNTPE). Scanning electron microscopy, X-ray photoelectron spectroscopy, Raman spectroscopy and electrochemical techniques were utilized to characterize the sensing interface and investigate the sensing mechanism. Under the optimal detection conditions, the oxidation peak currents of CC and HQ show a good linear relationship with their concentrations in the range of 0.4-400 µM with a detection limit of 0.083 µM for CC and 0.028 µM for HQ (S/N = 3). Moreover, the sensor exhibits good performance and can be applied successfully in the simultaneous detection of CC and HQ in tap water samples and urine samples with satisfactory results, indicating its promising application prospects.

Reduction-Tolerance Electrolyte Design for High-Energy Lithium Batteries.

Lithium batteries employing Li or silicon (Si) anodes hold promise for the next-generation energy storage systems. However, their cycling behavior encounters rapid capacity degradation due to the vulnerability of solid electrolyte interphases (SEIs). Though anion-derived SEIs mitigate this degradation, the unavoidable reduction of solvents introduces heterogeneity to SEIs, leading to fractures during cycling. Here, we elucidate how the reductive stability of solvents, dominated by the electrophilicity (EPT) and coordination ability (CDA), delineates the SEI formed on Li or Si anodes. Solvents exhibiting lower EPT and CDA demonstrate enhanced tolerance to reduction, resulting in inorganic-rich SEIs with homogeneity. Guided by these criteria, we synthesized three promising solvents tailored for Li or Si anodes. The decomposition of these solvents is dictated by their EPTs under similar solvation structures, imparting distinct characteristics to SEIs and impacting battery performance. The optimized electrolyte, 1 M lithium bis(fluorosulfonyl)imide (LiFSI) in N-Pyrrolidine-trifluoromethanesulfonamide (TFSPY), achieves 600 cycles of Si anodes with a capacity retention of 81 % (1910 mAh g-1). In anode-free Cu||LiNi0.5Co0.2Mn0.3O2 (NCM523) pouch cells, this electrolyte sustains over 100 cycles with an 82 % capacity retention. These findings illustrate that reducing solvent decomposition benefits SEI formation, offering valuable insights for the designing electrolytes in high-energy lithium batteries.

Employing the Anchor DSPE-PEG as a Redox Probe for Ratiometric Electrochemical Detection of Surface Proteins on Extracellular Vesicles with Aptamers.

Quantitative analysis of surface proteins on extracellular vesicles (EVs) has been considered to be a crucial approach for reflecting the status of diseases. Due to the diverse composition of surface proteins on EVs and the interference from nonvesicular proteins, accurately detecting the expression of surface proteins on EVs remains a challenging task. While membrane affinity molecules have been widely employed as EVs capture probes to address this issue, their inherent biochemical properties have not been effectively harnessed. In this paper, we found that the electrochemical redox activity of the DSPE-PEG molecule was diminished upon its insertion into the membrane of EVs. This observation establishes the DSPE-PEG molecule modified on the Au electrode surface as a capture and a redox probe for the electrochemical detection of EVs. By utilizing methylene blue-labeled aptamers, the targeted surface proteins of EVs can be detected by recording the ratio of the oxidation peak current of methylene blue and DSPE-PEG. Without complicated signal amplification, the detection limit for EVs is calculated to be 8.11 × 102 particles/mL. Using this platform, we directly analyzed the expression of CD63 and HER2 proteins on the surface of EVs in human clinical plasma samples, demonstrating its significant potential in distinguishing breast cancer patients from healthy individuals.

Aptamers as Recognition Elements for Electrochemical Detection of Exosomes.

Exosome analysis is emerging as an attractive noninvasive approach for disease diagnosis and treatment monitoring in the field of liquid biopsy. Aptamer is considered as a promising molecular probe for exosomes detection because of the high binding affinity, remarkable specificity, and low cost. Recently, many approaches have been developed to further improve the performance of electrochemical aptamer based(E-AB) sensors with a lower limit of detection. In this review, we focus on the development of using aptamer as a specific recognition element for exosomes detection in electrochemical sensors. We first introduce recent advances in evolving aptamers against exosomes. Then, we review methods of immobilization aptamers on electrode surfaces, followed by a summary of the main strategies of signal amplification. Finally, we present the insights of the challenges and future directions of E-AB sensors for exosomes analysis.

Portable and Field-Ready Detection of Circulating MicroRNAs with Paper-Based Bioluminescent Sensing and Isothermal Amplification.

We present a paper-based system that integrates bioluminescence resonance energy transfer (BRET) and isothermal amplification for the analysis of tumor-associated circulating microRNAs (miRNAs) in clinical serum samples. The analysis procedure could be easily accomplished with two pieces of functionalized paper and a low-cost smartphone-based device, which enables sequence-specific quantification of femtomolar miRNAs, without the need for tedious handling of aqueous reactions and operation of sophisticated equipment. Furthermore, the analytical performance of the proposed paper-based system was highly stable at room temperature, demonstrating its capability for cold-chain-free and remote deployment. These qualities highlight the practical utility of our method for the portable and field-ready miRNA diagnostic tests in resource-limited settings.

Assembly of DNA-Templated Bioluminescent Modules for Amplified Detection of Protein Biomarkers.

By virtue of its self-illuminating mechanism, the bioluminescence resonance energy transfer (BRET) technique has recently emerged as a promising platform for point-of-care (POC) diagnostics. However, due to the difficulty of incorporating generic affinity elements, such as aptamers and antibodies, current BRET-based methods are still not applicable to most clinically important biomarkers. Furthermore, the inability of these methods to amplify BRET signals leads to limited sensitivity in some applications. Here, we present a modular strategy for amplified BRET detection of protein biomarkers in human peripheral blood samples. In this strategy, a DNA-templated bioluminescent module was constructed by simultaneously binding luciferase and green fluorescent protein to one DNA template in a site-specific manner. The proposed modules showed high energy transfer efficiency and could be assembled into long self-illuminating polymers. Owing to this modular design, aptamers and antibodies were rationally incorporated, enabling specific assembly of multiple bioluminescent modules on one target. This strategy realized amplified BRET assays for human α-thrombin and prostate specific antigen (PSA) with the detection limit in the picomolar range using either a spectrophotometer or a smartphone. The modularity of our strategy allowed detection of different biomarkers by simple exchange of affinity elements. Furthermore, the self-illumination and isothermal amplification performance of this strategy make it an attractive tool for POC diagnostics.

Near-Infrared Fluorescent Ag2 Se-Cetuximab Nanoprobes for Targeted Imaging and Therapy of Cancer.

Theranostic nanoprobes integrated with diagnostic imaging and therapy capabilities have shown great potential for highly effective tumor therapy by realizing imaging-guided drug delivery and tumor treatment. Developing novel high-performance nanoprobes is an important basis for tumor theranostic application. Here, near-infrared (NIR) fluorescent and low-biotoxicity Ag2 Se quantum dots (QDs) have been coupled with cetuximab, a clinical antiepidermal growth factor receptor antibody drug for tumor therapy, via a facile bioconjugation strategy to prepare multifunctional Ag2 Se-cetuximab nanoprobes. Compared with the Ag2 Se QDs alone, the Ag2 Se-cetuximab nanoprobes display faster and more enrichment at the site of orthotopic tongue cancer, and thus present better NIR fluorescence contrast between the tumor and the surrounding regions. At 24 h postinjection, the NIR fluorescence of Ag2 Se-cetuximab nanoprobes at the tumor site is still easily detectable, whereas no fluorescence is observed for the Ag2 Se QDs. Moreover, the Ag2 Se-cetuximab nanoprobes have also significantly inhibited the tumor growth and improved the survival rate of orthotopic tongue cancer-bearing nude mice from 0% to 57.1%. Taken together, the constructed multifunctional Ag2 Se-cetuximab nanoprobes have achieved combined targeted imaging and therapy of orthotopic tongue cancer, which may greatly contribute to the development of nanotheranostics.

Application of surfactants in the electrochemical sensing and biosensing of biomolecules and drug molecules.

Realizing sensitive and efficient detection of biomolecules and drug molecules is of great significance. Among the detection methods that have been proposed, electrochemical sensing is favored for its outstanding advantages such as simple operation, low cost, fast response and high sensitivity. The unique structure and properties of surfactants have led to a wide range of applications in the field of electrochemical sensors and biosensors for biomolecules and drug molecules. Through the comparative analysis of reported works, this paper summarizes the application modes of surfactants in electrochemical sensors and biosensors for biomolecules and drug molecules, explores the possible electrocatalytic mechanism of their action, and looks forward to the development trend of their applications. This review is expected to provide some new ideas for subsequent related research work.

An Amperometric Biomedical Sensor for the Determination of Homocysteine Using Gold Nanoparticles and Acetylene Black-Dihexadecyl Phosphate-Modified Glassy Carbon Electrode.

A novel nanocomposite film composed of gold nanoparticles and acetylene black-dihexadecyl phosphate was fabricated and modified on the surface of a glassy carbon electrode through a simple and controllable dropping and electropolymerization method. The nanocomposite film electrode showed a good electrocatalytic response to the oxidation of homocysteine and can work as an amperometric biomedical sensor for homocysteine. With the aid of scanning electron microscopy, energy dispersive X-ray technology and electrochemical impedance spectroscopy, the sensing interface was characterized, and the sensing mechanism was discussed. Under optimal conditions, the oxidation peak current of homocysteine was linearly increased with its concentration in the range of 3.0 µmol/L~1.0 mmol/L, and a sensitivity of 18 nA/(µmol/L) was obtained. Furthermore, the detection limit was determined as 0.6 µmol/L, and the response time was detected as 3 s. Applying the nanocomposite film electrode for monitoring the homocysteine in human blood serum, the results were satisfactory.

Fabrication of a Disposable Amperometric Sensor for the Determination of Nitrite in Food.

Silver nanoparticles (AgNPs) were synthesized through an environmentally friendly method with tea extract as a reduction agent. By immobilizing them on the surface of a low-cost pencil graphite electrode (PGE) with the aid of a simple and well-controlled in-situ electropolymerization method, a novel nanosensing interface for nitrite was constructed. The film-modified PGE showed good electrocatalytic effects on the oxidation of nitrite and was characterized through scanning electron microscopy, X-ray photoelectron spectroscopy, and electrochemical techniques. Characterization results clearly show that the successful modification of AgNPs improved the surface area and conductivity of PGEs, which is beneficial to the high sensitivity and short response time of the nitrite sensor. Under the optimal detection conditions, the oxidation peak current of nitrite had a good linear relationship with its concentration in the range of 0.02-1160 µmol/L with a detection limit of 4 nmol/L and a response time of 2 s. Moreover, the sensor had high sensitivity, a wide linear range, a good anti-interference capability, and stability and reproducibility. Additionally, it can be used for the determination of nitrite in food.

Reversible covalent nanoassemblies for augmented nuclear drug translocation in drug resistance tumor.

The drug efflux by P-glycoprotein (P-gp) is the primary contributor of multidrug resistance (MDR), which eventually generates insufficient nuclear drug accumulation and chemotherapy failure. In this paper, reversible covalent nanoassemblies on the basis of catechol-functionalized methoxy poly (ethylene glycol) (mPEG-dop) and phenylboronic acid-modified cholesterol (Chol-PBA) are successfully synthesized for delivery of both doxorubicin (DOX, anti-cancer drug) and tariquidar (TQR, P-glycoprotein inhibitor), which shows efficient nuclear DOX accumulation for overcoming tumor MDR. Through naturally forming phenylboronate linkage in physiological circumstances, Chol-PBA is able to bond with mPEG-dop. The resulting conjugates (PC) could self-assemble into reversible covalent nanoassemblies by dialysis method, and transmission electron microscopy analysis reveals the PC distributes in nano-scaled spherical particles before and after drug encapsulation. Under the assistance of Chol, PC can enter into lysosome of tumor cells via low-density lipoprotein (LDL) receptor-mediated endocytosis. Then the loaded TQR and DOX are released in acidic lysosomal compartments, which inhibit P-gp mediated efflux and elevate nuclear accumulation of DOX, respectively. At last, this drug loaded PC nanoassemblies show significant tumor suppression efficacy in multidrug-resistant tumor models, which suggests great potential for addressing MDR in cancer therapy.

Cu-In-S/ZnS:Gd3+ quantum dots with isolated fluorescent and paramagnetic modules for dual-modality imaging in vivo.

Gd3+-doped quantum dots (QDs) have been widely used as small-sized bifunctional contrast agents for fluorescence/magnetic resonance (FL/MR) dual-modality imaging. However, Gd3+ doping will always compromise the FL of host QDs. Therefore, balancing the Gd3+ doping and the optical properties of QDs is crucial for constructing high-performance bifunctional nanoprobes. Additionally, most paramagnetic QDs are synthesized in the organic phase and need to be transferred to the aqueous phase for bioimaging. Herein, ingeniously designed shell-doped Cu-In-S/ZnS:Gd3+ QDs have been prepared in the aqueous phase. It has been demonstrated that isolating paramagnetic Gd3+ from fluorescent Cu-In-S core via doping Gd3+ into ZnS shell not only avoided the decrease of FL quantum yield (QY), but also ensured the water accessibility of paramagnetic Gd3+ ions, by which the FL QY and r1 relaxivity of Cu-In-S/ZnS:Gd3+ QDs achieved as much as 15.6% and 15.33 mM-1·s-1, respectively. These high-performance QDs with excellent stability, low biotoxicity, and good tumor permeability were successfully applied for in vivo tumor FL/MR dual-modality imaging, and have shown significant potential in the precision detection and diagnosis of diseases.

50C Fast-Charge Li-Ion Batteries using a Graphite Anode.

Li-ion batteries have made inroads into the electric vehicle market with high energy densities, yet they still suffer from slow kinetics limited by the graphite anode. Here, electrolytes enabling extreme fast charging (XFC) of a microsized graphite anode without Li plating are designed. Comprehensive characterization and simulations on the diffusion of Li+ in the bulk electrolyte, charge-transfer process, and the solid electrolyte interphase (SEI) demonstrate that high ionic conductivity, low desolvation energy of Li+ , and protective SEI are essential for XFC. Based on the criterion, two fast-charging electrolytes are designed: low-voltage 1.8 m LiFSI in 1,3-dioxolane (for LiFePO4 ||graphite cells) and high-voltage 1.0 m LiPF6 in a mixture of 4-fluoroethylene carbonate and acetonitrile (7:3 by vol) (for LiNi0.8 Co0.1 Mn0.1 O2 ||graphite cells). The former electrolyte enables the graphite electrode to achieve 180 mAh g-1 at 50C (1C = 370 mAh g-1 ), which is 10 times higher than that of a conventional electrolyte. The latter electrolyte enables LiNi0.8 Co0.1 Mn0.1 O2 ||graphite cells (2 mAh cm-2 , N/P ratio = 1) to provide a record-breaking reversible capacity of 170 mAh g-1 at 4C charge and 0.3C discharge. This work unveils the key mechanisms for XFC and provides instructive electrolyte design principles for practical fast-charging LIBs with graphite anodes.

Effect of Pretreatment and Cryogenic Temperatures on Mechanical Properties and Microstructure of Al-Cu-Li Alloy.

The mechanical properties of Al-Cu-Li alloys after different pretreatments were investigated through tensile testing at 25 and -196 °C, and the corresponding microstructure characteristics were obtained through optical metallography, scanning electron microscopy, electron backscatter diffraction, and transmission electron microscopy. An increasing mechanism of both strength and ductility at cryogenic temperatures was revealed. The results show that the hot deformation pretreatment before homogenization promoted the precipitation of Al3Zr particles, improved particle distribution, and inhibited local precipitation-free zones (PFZ). Both hot deformation pretreatment before homogenization and cryogenic temperature were able to improve strength and ductility. The former improved strength by promoting the precipitation of Al3Zr particles while enhancing the strengthening effect of the second-phase particles and reducing the thickness of the coarse-grained layer. Meanwhile, the increase in ductility is attributable to the decrease in thickness of the coarse-grained layer, which reduced the deformation incompatibility between the coarse and fine grains and increased the strain-hardening index. The latter improved the strength by suppressing dynamic recovery during the deformation process, increasing the dislocation density, and enhancing the work hardening effect. Additionally, the increase in ductility is attributable to the suppression of planar slip and strengthening of grain boundaries, which promoted the deformation in grain interiors and made the deformation more uniform.

Low-cost batteries based on industrial waste Al-Si microparticles and LiFePO4 for stationary energy storage.

Owing to their high capacity and low working potential, Si-based anodes are regarded as potential alternatives to graphite anodes to meet the higher requirements of Li-ion batteries (LIBs). However, high volume change causes the fracturing and pulverization of the bulk anode and continuous side reactions, which are more severe in large-particle Si anodes, limiting its practical application. Herein, to build a low-cost battery system, we chose a common industrial waste product, Al-Si microparticles (Al-SiMPs, ∼30 µm), as the anode for LIBs and coupled it with a 2.0 M LiFP6 2-MeTHF electrolyte to support its operation. The Al-SiMP anode showed a high specific capacity and a significantly improved electronic conductivity, ensuring high energy and power densities. An ultra-high initial coulombic efficiency (iCE) of 91.6% and a cycling CE of ∼99.9% were obtained in the half-cells, which delivered a capacity of 1300 mA h g-1 and maintained 95.3% after 100 cycles. Paired with low-cost and high-safety LiFePO4 as the cathode, the LFP||Al-SiMP full cells showed decent cycling stability and exhibited a considerable cost advantage, demonstrating a competitive solution for stationary energy storage.

Small-sized copolymeric nanoparticles for tumor penetration and intracellular drug release.

Poor solid-tumor penetration of nanocarriers limits the drug efficacy. Herein, small-sized copolymeric nanoparticles are prepared for delivering the chemotherapeutic drug DOX into solid tumors deeply and releasing the drug effectively. These small-sized copolymeric nanoparticles represent substantial potential for clinical translation.

A highly reactive chalcogenide precursor for the synthesis of metal chalcogenide quantum dots.

Metal chalcogenide semiconductor nanocrystals (NCs) are ideal inorganic materials for solar cells and biomedical labeling. In consideration of the hazard and instability of alkylphosphines, the phosphine-free synthetic route has become one of the most important trends in synthesizing selenide QDs. Here we report a novel phase transfer strategy to prepare phosphine-free chalcogenide precursors. The anions in aqueous solution were transferred to toluene via electrostatic interactions between the anions and didodecyldimethylammonium bromide (DDAB). The obtained chalcogenide precursors show high reactivity with metal ions in the organic phase and could be applied to the low-temperature synthesis of various metal chalcogenide NCs based on a simple reaction between metal ions (e.g. Ag(+), Pb(2+), Cd(2+)) and chalcogenide anions (e.g. S(2-)) in toluene. In addition to chalcogenide anions, other anions such as BH4(-) ions and AuCl4(-) ions can also be transferred to the organic phase for synthesizing noble metal NCs (such as Ag and Au NCs).

Ag2Se quantum dots with tunable emission in the second near-infrared window.

Quantum dots (QDs) with fluorescence in the second near-infrared window (NIR-II, 1000-1400 nm) are ideal fluorophores for in vivo imaging of deep tissue with high signal-to-noise ratios. Ag2Se (bulk band gap 0.15 eV) is a promising candidate for preparing NIR-II QDs. By using 1-octanethiol as ligand to effectively balance the nucleation and growth, tuning the fluorescence of Ag2Se QDs was successfully realized in the NIR-II window ranged from 1080 to 1330 nm. The prepared Ag2Se QDs can be conveniently transferred to the aqueous phase by ligand exchange, showing great potential for multicolor NIR-II fluorescence imaging in vivo.

Water-soluble Ag(2)S quantum dots for near-infrared fluorescence imaging in vivo.

A one-step method for synthesizing water-soluble Ag(2)S quantum dots terminated with carboxylic acid group has been reported. The crystal structure and surface of the prepared Ag(2)S quantum dots were characterized. The prepared Ag(2)S quantum dots exhibited bright photoluminescence and excellent photostabilities. The photoluminescence emissions could be tuned from visible region to near-infrared (NIR) region (from 510 nm to 1221 nm). Ultra-small sized Ag(2)S nanoclusters were synthesized with high initial monomer concentration in the current system. The in vivo imaging experiments of nude mice showed that the NIR photoluminescence of the prepared Ag(2)S quantum dots could penetrate the body of mice. Compared to the conventional NIR quantum dots, the Ag(2)S quantum dots don't contain toxic elements to body (such as Cd and Pb), thus, the prepared Ag(2)S quantum dots could serve as excellent NIR optical imaging probes and would open the opportunity to study nanodiagnostics and imaging in vivo.