Microscopic in situ observation of electromechanical instability in a dielectric elastomer actuator utilizing transparent carbon nanotube electrodes.

Electromechanical instability (EMI) restricts the performance of dielectric elastomer actuators (DEAs), leading to premature electrical breakdown at a certain voltage. However, macro-level observations using traditional carbon grease electrodes have failed to capture the detailed features of EMI. In this study, we investigated EMI at the microscopic scale by fabricating transparent and conductive single-walled carbon nanotube (SWCNT) electrodes. Our findings reveal that EMI predominantly occurs in highly localized regions with dimensions on the order of tens of micrometers. This snap-through instability is likely induced by pre-existing defects within the elastomer, such as air voids or conductive particles, which reduce the critical voltage required for EMI in the flawed areas. From the perspective of phase transition principles, these defects act as heterogeneous nucleation sites for new phase embryos, thereby lowering the energy barrier for the electromechanical phase transition (i.e., EMI) compared to homogeneous nucleation in an ideally impurity-free elastomer. This study clarifies the longstanding discrepancy between theoretically predicted deformation bursts and the experimentally observed macroscopic continuous expansion of DEAs under low pre-stretch conditions. Additionally, it underscores the critical importance of material purity in mitigating electromechanical instability.

Global burden of non-optimal temperature attributable stroke: The long-term trends, population growth and aging effects.

Since the 20th century, the world has undergone climate change, population growth and population aging, which may result in alterations in the epidemiology of non-optimal temperature-associated strokes. We employed multiple methodologies and data from the global burden of disease 2019 to unveil the long-term curvilinear trends in strokes attributed to non-optimal temperature and the impact of aging and population growth on its changing epidemiology. From 1990 to 2019, the age-standardized DALYs rate (ASDR) of strokes attributable to low temperature had been decreasing, but from 2016, the continued downward trend in ASDR disappeared and began to remain stable. On the contrary, the ASDR of strokes attributable to high temperature continued to increase. The high socio-demographic index (SDI) region experienced the fastest decreased trend. The disease burden of stroke attributable to low temperature is increased by aging in 178 countries (87.25%), compared with 130 (63.73%) for high temperature. After excluding aging and population growth, the DALY rate for strokes attributed to high temperature was increasing in 87 countries and territories (42.64%). The disease burden of strokes attributed to low temperature is far greater than that of high temperature in absolute figures. However, globally, there is a significant trend toward an increase in strokes attributed to high temperature. Social development has largely offset the burden of strokes attributed to low temperature, but most regions of the world are equally affected by strokes attributed to high temperature. Simultaneously, in the framework of climate change, aging is also largely hindering stroke prevention efforts.

Colorectal cancer and its attributable risk factors in East Asia, 1990-2030.

BACKGROUND: The disease burden of colorectal cancer in East Asia has been at a high level. However, the epidemiological characteristics of the disease burden in this region have not been systematically studied. METHOD: Data were obtained from the Global Burden of Disease 2019 program. Joinpoint analysis was used to identify long-term trends in mortality of colorectal cancer. Independent effects of age, period, and cohort were detected by the age-period-cohort model. The Bayesian age-period-cohort model was performed to predict the burden of colorectal cancer across East Asia by 2030. RESULTS: From 1990 to 2019, the average annual percentage change (AAPC) showed upward trends in mainland China (1.05 [95% confidence interval (CI)], 0.82, 1.28) as well as Taiwan Province of China (1.81 [95% CI], 1.51, 2.10) but downward in Japan (-0.60 [95% CI], -0.70, -0.49) (P < 0.05). Attributable risk factors for colorectal cancer in East Asia remained stable over 30 years, while the risk of metabolic factors is noteworthy in the future. In the next decade, the age-standardized death rate (ASDR) of colorectal cancer in China was predicted to surpass that of Japan and South Korea in expectation. CONCLUSION: The mortality of colorectal cancer is escalating in developing countries, while it is gradually declining in high-income countries across East Asia. Nonetheless, the disease burden of colorectal cancer in high-income countries remains substantial level.

Ambient PM2.5 components might exacerbate bone loss among middle-aged and elderly women: evidence from a population-based cross-sectional study.

BACKGROUND: Previous studies have primarily focused on the links between fine particulate matter (PM2.5) and bone health among the general population instead of PM2.5 components and the specific population. We aimed to investigate the associations between PM2.5 components and bone health among middle-aged and elderly women. METHODS: A total of 748 middle-aged and elderly women were randomly sampled from 32 streets/villages in Hubei Province. The concentrations of ambient PM2.5 and its components were extracted across various residential areas from the Tracking Air Pollution in China (TAP) dataset. Bone mineral density measurements were obtained from dual-energy X-ray absorptiometry scans of study participants. Multivariable logistic and linear models were employed to assess the relationship between PM2.5 and its components and bone loss. RESULTS: Per interquartile range (IQR) increase in nitrate (NO3-) and ammonium (NH4+) concentrations were associated with 1.65 [95% confidence intervals (CI): 1.13, 2.30] and 1.77 (95% CI: 1.26, 2.49) times higher odds of osteoporosis, respectively. Long-term exposure to sulfate (SO42-), NO3-, and NH4+ was negatively associated with T-scores and bone mineral density in L1-L4 lumbar vertebrae. In addition, the elderly, women who have experienced menarche after the age of 14, and postmenopausal women were more susceptible to the water-soluble inorganic salts of PM2.5. CONCLUSION: The study emphasizes the need for comprehensive policies addressing air quality, with a specific focus on vulnerable populations such as middle-aged and elderly women. Public health interventions aimed at reducing ambient PM2.5 concentrations and minimizing exposure to its harmful components are crucial in mitigating the adverse impact on skeletal health and improving the overall well-being of communities.

Utilizing daily excessive concentration hours to estimate small for gestational age infants attributable to fine particulate matter in Wuhan, China.

Limited studies in China have explored the association between gravidae exposure to PM2.5 and small for gestational age infants (SGA), yielding inconsistent results. This study in Wuhan utilized daily excessive concentration hours (DECH) as a novel measure to assess PM2.5's impact on SGA. Data on air pollutants and pregnant women were collected from the Wuhan Municipal Ecology and Environmental Bureau and Wuhan Children's Hospital, respectively. Logistic regression models were employed to evaluate the contribution of PM2.5-DECH and PM2.5-mean to SGA. Significant correlations were observed between PM2.5-mean and SGA during the second trimester [OR = 1.23 (95% CI: 1.14-1.32)] and the entire pregnancy [OR = 1.15 (95% CI: 1.07-1.24)]. Similar correlations were found between PM2.5-DECH and SGA. These findings suggest that increased PM2.5 exposure is associated with a higher risk of SGA, and DECH may be used as a prospective substitute indicator for daily average concentration in similar studies.

Improvements of the modulation bandwidth and data rate of green-emitting CsPbBr3 perovskite quantum dots for Gbps visible light communication.

CsPbBr3 perovskite quantum dots (PQDs) as promising color conversion materials have been widely used in display and visible light communication (VLC), but most CsPbBr3 PQDs for VLC are randomly selected without optimization. Thereby the exploration of fundamental experimental parameters of QDs is essential to better employ their performance advantages. Herein, we investigated the concentration and solvent effects on photoluminescence (PL) properties and communication performance of CsPbBr3 PQDs. The PL, time-resolved PL characterization and communication measurements of CsPbBr3 PQDs all exhibit concentration dependence, suggesting that there exists an optimum concentration to take advantages of performance merits. CsPbBr3 PQDs with a concentration of 0.5 mg/ml show the shortest carrier lifetime and achieve the highest -3 dB bandwidth (168.03 MHz) as well as the highest data rate (660 Mbps) comparing to other concentrations. And in terms of the optimal concentration, we further explored the approach to improve the communication performance, investigating the effect of polarity solvent on the communication performance of CsPbBr3 PQDs. Original 0.5 mg/ml CsPbBr3 PQDs (1 ml) with 55 µL ethanol added in obtain a higher -3 dB bandwidth of 363.68 MHz improved by ∼116.4% and a record data rate of 1.25 Gbps improved by ∼89.4% but weaker PL emission due to energy transfer. The energy transfer assisted improvement may open up a promising avenue to improve the communication performance of QDs, but more feasible energy transfer path needs to be explored to ensure the stability of QDs.

10-Gbps visible light communication in a 10-m free space based on violet series-biased micro-LED array and distance adaptive pre-equalization.

In this paper, we fabricated a 3×3 violet series-biased micro-LED array with high-output optical power and applied it in high-speed and long-distance visible light communication. By employing the orthogonal frequency division multiplexing modulation scheme, distance adaptive pre-equalization, and a bit-loading algorithm, record data rates of 10.23 Gbps, 10.10 Gbps, and 9.51 Gbps were achieved at 0.2 m, 1 m, and 10 m, respectively, below the forward error correction limit of 3.8×10-3. To the best of our knowledge, these are the highest data rates achieved by violet micro-LEDs in free space and the first communication demonstration beyond 9.5 Gbps at 10 m using micro-LEDs.

InGaN micro-LED array with integrated emission and detection functions for color detection application.

InGaN-based micro-LEDs can detect and emit optical signals simultaneously, owing to their overlapping emission and absorption spectra, enabling color detection. In this paper, we fabricated a green InGaN-based micro-LED array with integrated emission and detection functions. On the back side of the integrated device, when the 80 µm micro-LED emitted light, the 200 µm LED could receive reflected light to accomplish color detection. The spacing between the 80 µm and the 200 µm micro-LEDs was optimized to be 1 mm to reduce the effect of the direct light transmitted through the n-GaN layer without reflection. The integrated device shows good detection performance for different colors and skin colors, even in a dark environment. In addition, light can be emitted from the top side of the device. Utilization of light from both sides of the integrated device provides the possibility of its application in display, communication, and detection on the different sides.

Size-dependent sidewall defect effect of GaN blue micro-LEDs by photoluminescence and fluorescence lifetime imaging.

Sidewall defects play a key role in determining the efficiency of GaN-based micro-light emitting diodes (LEDs) for next generation display applications, but there still lacks direct observation of defects-related recombination at the affected area. In this Letter, we proposed a direct technique to investigate the recombination mechanism and size effect of sidewall defects for GaN blue micro-LEDs. The results show that mesa etching will produce stress release near the sidewall, which can reduce the quantum confinement Stark effect (QCSE) to improve the radiative recombination. Meanwhile, the defect-related non-radiative recombination generated by the sidewall defects plays a leading role under low-power injection. In addition, the effective area of the mesas affected by the sidewall defects can be directly observed according to the fluorescence lifetime imaging microscope (FLIM) characterization. For example, the effective area of the mesa with 80 µm is affected by 23% while the entire area of the mesa with 10 µm is almost all affected. This study provides guidance for the analysis and repair of sidewall defects to improve the quantum efficiency of micro-LEDs display at low current density.

Enantioselective Synthesis of Bispiro[indanedione-oxindole-cyclopropane]s through Organocatalytic [2+1] Cycloaddition.

A series of compounds featuring a novel bispiro[indanedione-oxindole-cyclopropane] moiety have been synthesized through a squaramide-catalyzed [2+1] cycloaddition reaction. The tandem Michael-alkylation reaction of 2-arylidene-1,3-indanediones with 3-bromooxindoles furnished the cycloadducts in high yields with excellent diastereo- and enantioselectivities. The ammonium ylide in the catalytic process, as a key intermediate, was revealed by the high-resolution mass spectrometry study.

Short-term exposure to ozone and mortality from AIDS-related diseases: A case-crossover study in the middle Yangtze River region, China.

BACKGROUND: Previous investigations have predominantly concentrated on the influence of ozone (O3) on general population mortality. However, a noticeable gap exists regarding the attention directed towards susceptible demographics, specifically individuals afflicted by human immunodeficiency virus/acquired immunodeficiency syndrome (HIV/AIDS). METHODS: A dataset comprising 1467 AIDS-related fatalities from 2013 to 2020 was amassed from the Hubei Provincial Center for Disease Control and Prevention. Daily maximum 8-h average O3 levels and meteorological parameters were extracted from the ChinaHighAirPollutants dataset and the National Meteorological Science Data Center, respectively. A time-stratified case-crossover methodology was employed to scrutinize the connection between short-term exposure to O3 and AIDS-related deaths. RESULTS: A rise of one interquartile (IQR) in O3 concentration, lagged by 4 days, was associated with a 15% [95% confidence intervals (CIs): 2, 31] increase in AIDS-related deaths. Notably, males demonstrated heightened susceptibility to the adverse consequences of O3, marked by an odds ratio of 1.20 (95% CIs: 1.05, 1.37) at lag 4 day. Additionally, patients aged over 65 years exhibited escalated vulnerability to brief O3 exposure. Marriage status and educational attainment emerged as influential factors modifying the interplay between O3 and AIDS-related mortality. CONCLUSIONS: Our study presents novel evidence spotlighting the deleterious repercussions of O3 on mortality in the HIV/AIDS population.

Effect of Different Types of Ossification of the Posterior Longitudinal Ligament on the Dynamic Biomechanical Response of the Spinal Cord: A Finite Element Analysis.

Ossification of the posterior longitudinal ligament (OPLL) has been identified as an important cause of cervical myelopathy. However, the biomechanical mechanism between the OPLL type and the clinical characteristics of myelopathy remains unclear. The aim of this study was to evaluate the effect of different types of OPLL on the dynamic biomechanical response of the spinal cord. A three-dimensional finite element model of the fluid-structure interaction of the cervical spine with spinal cord was established and validated. The spinal cord stress and strain, cervical range of motion (ROM) in different types of OPLL models were predicted during dynamic flexion and extension activity. Different types of OPLL models showed varying degrees of increase in stress and strain under the process of flexion and extension, and there was a surge toward the end of extension. Larger spinal cord stress was observed in segmental OPLL. For continuous and mixed types of OPLL, the adjacent segments of OPLL showed a dramatic increase in ROM, while the ROM of affected segments was limited. As a dynamic factor, flexion and extension of the cervical spine play an amplifying role in OPLL-related myelopathy, while appropriate spine motion is safe and permitted. Segmental OPLL patients are more concerned about the spinal cord injury induced by large stress, and patients with continuous OPLL should be noted to progressive injuries of adjacent level.

Air pollution weaken your muscle? Evidence from a cross-sectional study on sarcopenia in central China.

BACKGROUND: As the world experiences a demographic shift towards aging populations, there will be a significant surge in the number of sarcopenia patients, along with an unprecedented expansion in the associated economic burden. The multitudinous risk factors for sarcopenia have been reported, but evidence for air pollution remains rare. METHODS: This cross-sectional study employed multi-stage random sampling to select 1592 participants over 40 years of age from Hubei Province. Daily mean concentrations of air pollutants were collected ChinaHighAirPollutants dataset. Unconditional logistic regression models were utilized to investigate the associations between air pollution and sarcopenia. RESULTS: For each 1 µg/m3 increase in PM2.5, PM10, SO2 and O3, there were corresponding elevations of 11.1% [95% confidence interval (CI): 4.9, 17.7], 4.3% (95% CI: 1.4, 7.2), 22.6% (95% CI: 7.2, 40.1) and 9.3% (95% CI: 0.7, 18.7) in the risk of sarcopenia, respectively. The associations of PM2.5/PM10/O3-sarcopenia were more pronounced in females, with corresponding odds ratios (ORs) and 95% CIs of 1.179 (1.062, 1.310), 1.079 (1.027, 1.135) and 1.180 (1.026, 1.358), separately. Additionally, individuals residing in rural areas were more susceptible to the effects of PM2.5 and PM10. Current/ever smokers or drinkers were also at higher risk of developing sarcopenia caused by PM2.5, PM10 and O3 exposure. Mixture analyses show a surge of 48.4% (95% CI: 3.6%, 112.5%) in the likelihood of suffering from sarcopenia, and the joint impacts of the air pollution were mainly driven by PM2.5. CONCLUSIONS: Our results produced evidence for a relationship between air pollution exposure and the increased prevalence of sarcopenia in China. Public health and relevant departments should make efforts to prevent sarcopenia, particularly in China experiencing rapid demographic aging.

Potential of electronic devices for detection of health problems in older adults at home: A systematic review and meta-analysis.

OBJECTIVE: The aim of this review was to evaluate the overall diagnostic performance of e-devices for detection of health problems in older adults at home. METHODS: A systematic review was conducted following the PRISMA-DTA guidelines. RESULTS: 31 studies were included with 24 studies included in meta-analysis. The included studies were divided into four categories according to the signals detected: physical activity (PA), vital signs (VS), electrocardiography (ECG) and other. The meta-analysis showed the pooled estimates of sensitivity and specificity were 0.94 and 0.98 respectively in the 'VS' group. The pooled sensitivity and specificity were 0.97 and 0.98 respectively in the 'ECG' group. CONCLUSIONS: All kinds of e-devices perform well in diagnosing the common health problems. While ECG-based health problems detection system is more reliable than VS-based ones. For sole signal detection system has limitation in diagnosing specific health problems, more researches should focus on developing new systems combined of multiple signals.

Bitter Peptides in Fermented Soybean Foods - A Review.

Fermented soybean foods with a long history are popular worldwide because of rich nutrition. However, many traditional fermented soybean foods have unacceptable bitterness, which mostly comes from the bitter peptides produced from the hydrolysis of soybean proteins. In this review, the bitter peptides in fermented soybean foods is briefly reviewed. The structural properties of bitter receptors and bitter peptides were reviewed. Bitterness is perceived through the binding between bitter compounds and specific sites of bitter receptors (25 hTAS2Rs), which further activate the downstream signal pathway mediated by G-protein. And it converts chemical signals into electrical signals, and transmit them to the brain. In addition, the influencing factors of bitter peptides in fermented soybean foods were summarized. The bitterness of fermented soybean foods primarily results from the raw materials, microbial metabolism during fermentation, unique techniques, and interactions of various flavor compounds. Moreover, the structure-bitterness relationship of bitter peptides was also discussed in this review. The bitterness degree of the bitter peptide is related to the polypeptide hydrophobicity, amino acids in the peptide, peptide molecular weight and polypeptide spatial structure. Studying the bitter peptides and their bitter characteristics in fermented soybean foods is beneficial for improving the sensory quality of fermented soybean foods and prompting more consumers accept them.

Vertical stack integration of blue and yellow InGaN micro-LED arrays for display and wavelength division multiplexing visible light communication applications.

In this work, we demonstrated a convenient and reliable method to realize the vertical stack integration of the blue and yellow InGaN micro-LED arrays. The standard white and color-tunable micro-light sources can be achieved by adjusting the current densities injection of the micro-LEDs. The spectra cover violet, standard white, cyan, etc., showing an excellent color-tunable property. And the mixed standard white light can be separated into red-green-blue three primary colors through the color filters to realize full-color micro-LED display with a color gamut of 75% NTSC. Besides, the communication capability of the integrated micro-LED arrays as visible light communication (VLC) transmitters is demonstrated with a maximum total data rate of 2.35 Gbps in the wavelength division multiplexing (WDM) experimental set-up using orthogonal frequency division multiplexing modulation. In addition, a data rate of 250 Mbps is also realized with the standard white light using on-off keying (OOK) modulation. This integrated device shows great potential in full-color micro-LED display, color-tunable micro-light sources, and high-speed WDM VLC multifunctional applications.

Red, green and blue InGaN micro-LEDs for display application: temperature and current density effects.

Micro-LED has attracted tremendous attention as next-generation display, but InGaN red-green-blue (RGB) based high-efficiency micro-LEDs, especially red InGaN micro-LED, face significant challenges and the optoelectronic performance is inevitably affected by environmental factors such as varying temperature and operating current density. Here, we demonstrated the RGB InGaN micro-LEDs, and investigated the effects of temperature and current density for the InGaN RGB micro-LED display. We found that temperature increase can lead to the changes of electrical characteristics, the shifts in electroluminescence spectra, the increase of full width at half maximum and the decreases of light output power, external quantum efficiency, power efficiency, and ambient contrast ratios, while current density increase can also give rise to different changing trends of the varieties of parameters mentioned just above for the RGB micro-LED display, creating great challenges for its application in practical scenarios. Despite of the varying electrical and optical charateristics, relatively high and stable colour gamut of the RGB display can be maintained under changing temperature and current density. Based on the results above, mechanisms on the temperature and current density effects were analyzed in detail, which would be helpful to predict the parameters change of micro-LED display caused by temperature and current density, and provided guidance for improving the performance of InGaN micro-LED display in the future.

Long-term exposure to air pollution might decrease bone mineral density T-score and increase the prevalence of osteoporosis in Hubei province: evidence from China Osteoporosis Prevalence Study.

We hypothesized that air pollution could cause oxidative damage and inflammation in the human body, which was linked to bone loss. Our result showed that long-term exposure to air pollution might decrease bone mineral density (BMD) T-score and increase the prevalence of osteoporosis in Hubei province. INTRODUCTION: Osteoporosis is becoming an increasingly serious public health problem with the advent of global aging. Long-term exposure to air pollution has been linked to multitudinous adverse health outcomes, but evidence is still relatively limited and inconsistent for BMD T-score and osteoporosis. This study aimed at exploring the associations between long-term exposure to air pollution and BMD T-score and osteoporosis. METHODS: The Hubei part of the China Osteoporosis Prevalence Study was extracted. Data on air pollutants were collected by the national air quality real-time release platform of China Environmental Monitoring Station. Linear mixed models and multilevel logistic regression analyses were performed to assess the associations between air pollution and BMD T-score and osteoporosis, respectively. Subgroup analyses were conducted to identify vulnerable populations. RESULTS: A total of 1845 participants were included in this cross-section study. Per 10 ug/m3 increase in PM2.5 and SO2 were associated with 0.20 (95% CI: 0.04, 0.36) and 0.31 (95% CI: 0.11, 0.51) decrease in BMD T-score of the neck of femur, respectively. Per 10 ug/m3 increase in CO was linked with 0.03 (95% CI: 0.02, 0.05) decrease in BMD T-score of the total hip. Per 1 ug/m3 increase in PM2.5 was associated with 5% increase in the prevalence of osteoporosis in all participants. In general, the higher concentrations of PM2.5 with the more adverse effect on osteoporosis (P for trend = 0.01). The impact of PM2.5 on osteoporosis in males was higher than that in females [1.29, 95% CI (1.11, 1.50) vs 1.01, 95% CI (0.95, 1.07)]. Per 1 ug/m3 increase in PM10 corresponded with 4% elevation in the risks of osteoporosis in rural population. The ORs (95% CI) for the association of osteoporosis and NO2 in ever/current smoking and drinking population were 1.07 (1.01, 1.13) and 1.05 (1.00, 1.09), respectively. SO2 had a statistically significant positive effect on people with comorbidity [OR = 1.10, (95% CI: 1.00 to 1.21)], while none in people without comorbidity [OR = 0.96, (95% CI: 0.88 to 1.05)]. CONCLUSION: Our study provided evidence that long-term exposure to PM2.5 was linked with the decreased BMD T-score and increased risk of osteoporosis among all participants. The adverse impacts of PM2.5, PM10, and NO2 were larger in males than in females. People having comorbidity, living in rural areas, and current/ever smoking or drinking were more vulnerable to air pollution. Public health departments should consider air pollution to formulate better preventive measures for osteoporosis.

Beyond 25 Gbps optical wireless communication using wavelength division multiplexed LEDs and micro-LEDs.

In this Letter, high-speed optical wireless communication (OWC) with three light-emitting diodes (LED) and five micro-LEDs (µLEDs) is proposed as a proof-of-concept wavelength division multiplexing (WDM) system. It covers a wide spectrum from deep ultraviolet (UV) to visible light and thus could offer both visible light communication (VLC) and UV communication simultaneously. An aggregated data rate of up to 25.20 Gbps over 25 cm free space is achieved, which, to the best of our knowledge, is the highest data rate for LED-based OWC ever reported. Among them, the five µLEDs offer a data rate of up to 18.43 Gbps, which, to the best of our knowledge, is the highest data rate for µLED-based OWC so far. It shows the superiority and potential of µLEDs for WDM-OWC. Additionally, a data rate of 20.11 Gbps for VLC is achieved.

Endogenous stimuli-responsive nanoparticles for cancer therapy: From bench to bedside.

Cancer is complicated to treat because of its high propensity for recurrence and metastasis, and various side effects of conventional cancer treatments. With the development of nanotechnology, biology, material science and pharmacy, nanoparticles emerge as a promising method to load anti-cancer drugs to deal with the downsides of conventional treatments. Among the various class of nanoparticles, endogenous stimuli-responsive nanoparticles exert significant anti-cancer effects by releasing drugs due to the stimulations from pH gradient, redox as well as other enzymes of cancer microenvironment. Extraordinary progress has been achieved as the latest endogenous stimuli-responsive nanoparticles exhibit better therapeutic effects, lower toxicity, and superior biocompatibility, indicating brighter prospects for cancer therapy. However, these stimuli-responsive nanoparticles are still not ready for large-scale clinical application, due to reasons such as the lack of clinical trials and high cost of manufacturing. Here, we consolidate the advancements and limitations of various endogenous stimuli-responsive nanoparticles, as well as critically discuss the prospects of this kind of nanoparticles in tumor treatments.